Hendi 223031 Instrukcja obsługi

Marka: Hendi

Model: 223031

Kategoria: Piekarniki

Typ: Instrukcja obsługi

User manual

Gebrauchsanweisung

Gebruiksaanwijzing

Instrukcja obsługi

Mode d’emploi

Istruzioni per l’utente

Instrucţiunile utilizatorului

Руководство по эксплуатации

CONVECTION OVENS HENDI NANO

PIEC KONWEKCYJNY HENDI NANO

You should read this user manual carefully before

using the appliance

Przed uruchomieniem urządzenia należy koniecznie

dokładnie przeczytać niniejszą instrukcję obsługi

Item: 223369

223376

223352

223345

NOTE: all devices that require a steady connection to water mains (including this device) must be

connected to a water softener which removes calcium and magnesium compounds from the wa-

ter. The water softener must be used in line with the manufacturer’s recommendations included

in instruction manual.

If a water softener is not connected or is user and/or regenerated incorrectly, the dealer shall not recognise

any complaints related to repairs due to lime scale build-up in the device.

THE FOLLOWING PRODUCTS ARE RECOMMENDED TO ASSURE PROPER REGENERATION:

Salt tablets, 25 kg bag - code: 231265

Water hardness

German degrees

(°dH)

French degrees (°fH) mmol/l Clark degrees

Water softener

connection

over 24 over 40 over 4.2 over 28 Required

18 - 24 32 - 40 3.2 – 4.2 22 - 28 Required

12 - 18 19 – 32 2.1 – 3.2 13 - 22 Required

4 - 12 7 - 19 0.7 – 2.1 5 - 13 Required

under 4 under 7 under 0.7 under 5 Not required

Keep this manual with the appliance.

Diese Gebrauchsanweisung bitte beim Gerät aufbewahren.

Bewaar deze handleiding bij het apparaat.

Zachowaj instrukcję urządzenia.

Gardez ces instructions avec cet appareil.

Conservate le istruzioni insieme all’apparecchio.

Păstraţi manualul de utilizare alături de aparat.

Хранить руководство вместе с устройством.

For indoor use only.

Nur zur Verwendung im Innenbereich.

Alleen voor gebruik binnenshuis.

Do użytku wewnątrz pomieszczeń.

Pour l’usage à l’intérieur seulement.

Destinato solo all’uso domestico.

Numai pentru uz casnic.

Использовать только в помещениях.

INDEX

INSTRUCTION FOR THE INSTALLER

1. WARNING..........................................................................................................................................................................................................5

2. PRELIMINARY OPERATIONS ......................................................................................................................................................................5

3. INSTALLATION AREA ....................................................................................................................................................................................5

4. PREPARING FOR INSTALLATION ..............................................................................................................................................................6

5. ELECTRICAL CONNECTION .......................................................................................................................................................................6

6. WATER CONNECTION ............................................................................................................................................................................... 10

7. FUMES DISCHARGE ...................................................................................................................................................................................10

8. STACKING OVENS .......................................................................................................................................................................................10

9. SPECIFICATION............................................................................................................................................................................................11

INSTRUCTION FOR THE USER

2. TESTING ..........................................................................................................................................................................................................13

3. ORDINARY MAINTENANCE ....................................................................................................................................................................13

4. EXTRAORDINARY MAINTENANCE .......................................................................................................................................................14

5. MAINTENANCE IN CASE OF BREAKAGE ............................................................................................................................................ 15

6. ADVICE DURING COOKING .................................................................................................................................................................... 16

7. MECHANICAL OVEN CONTROL PANEL..............................................................................................................................................17

8. MULTIFUNCTION OVEN CONTROL PANEL .......................................................................................................................................18

9. DIGITAL OVEN CONTROL PANEL .........................................................................................................................................................19

10. WARRANTY .................................................................................................................................................................................................23

11. DISCARDING & ENVIRONMENT .........................................................................................................................................................23

INTRODUCTION

Dear client, thank you and congratulations for buying this appliance; we are confident that this is the begin-

ning of a positive and long-lasting collaboration.

This manual has all the necessary information for the correct use, maintenance and installation of this

appliance. The objective of this manual is to enable the technician and user to take all measures and pre-

cautions necessary for the safe, efficient, long-term use of the appliance.

Keep this booklet in a safe place, over the entire life cycle of the product for subsequent reference by the

operators designated to use and specialized technicians.

Where documents are lost or damaged the replacement documentation must be requested directly from

the manufacturer or retailer.

The manufacturer is not held liable for any damage caused by people or things or for inappropriate use of

the appliance, modifications or repairs carried out by unauthorized personnel or used with spare parts not

recommended by the manufacturer and not intended for use with this model.

This appliance complies with the EEC directives in force.

1. WARNING

Read this instructions booklet carefully before starting the installation and start-up operations.

All installation, assembly, assistance and extraordinary maintenance shall be carried out by qualiﬁed person-

nel and supplied with necessary professional (authorizations by the manufacturer or retailer), in accordance

with local laws in effect where installation takes place regarding product and workplace safety.

Incorrect installation, assistance, maintenance, cleaning, tampering or modiﬁcations can cause malfunction,

damage and breakage.

The appliance must only be used for cooking or heating of foods in industrial kitchens. Any other use is inap-

propriate and dangerous.

2. PRELIMINARY OPERATIONS

On receipt of the product, make sure it has not been damaged during transport and that the packaging has

not been tampered with. In the case of damage or missing parts inform the carrier and retailer/manufacturer

immediately, indicating the code (Art.) and serial number (Ser N°) and attach a photo.

Check that the installation area is kept clear so that doors, corridors and passageways are accessible.

WARNING: the appliance may fall over during transport leading to breakage and damage to things and

people. Use suitable transport capable of taking the weight of the appliance. Do not drag or lean the device

for any reason. Lift it up straight from the ground and place horizontally.

3. INSTALLATION AREA

The appliance shall be installed in enclosed and well ventilated areas (not outdoors).

The ambient temperature of the place of installation of the oven must be higher than +4° C.

Before positioning the appliance, check the overall dimensions and the exact position of the electrical, water

and fumes exhaust connections, fumes exhaust.

INSTRUCTIONS FOR THE INSTALLER

It is advised to place the oven under an extractor hood or in such a way that hot fumes and odours exit the oven

via adequate ventilation to the outside.

The oven must be placed on a ﬂat surface so that it does not slip or turn over.

The installation area must be able to support the weight of the appliance ﬁlled to the maximum.

See the information level on the back of the oven for the gross weight.

Make sure that it is placed so that the door may be fully opened.

Position it so that the back of the oven is easily accessible for maintenance, connection to the mains sockets,

and water.

The appliance is not meant to be ﬁtted and a 5 cm space must be left all round it.

Do not position other heat sources like, fryers or hotplates, near the oven. If this is not possible at least respect

the following distances from machinery: 50 cm from the sides and above the appliance and 70 cm from behind.

Do not place the device near materials or containers of inﬂammable liquids (such as walls, furniture, screens,

gas canisters) as it can be a ﬁre hazard. If this is not possible, cover the inﬂammable parts with ﬁre and heat-

proof material and by checking ﬁre hazard regulations.

4. PREPARING FOR INSTALLATION

Remove the outer packaging (wooden or carton box) and

dispose it in compliance with the laws in force in the

country of installation.

REMOVING PROTECTIVE FILM ETC.

Remove the protection ﬁlm from the external and internal

walls. (See image)

Remove all information covering from the inside, and take

off all plastic packaging.

STAND ADJUSTMENT

Do not use the appliance without feet.

The adjustable feet are already screwed to the underside of the oven.

If they are not used, this prevents airﬂow from cooling the electric parts and outsides of the oven which causes

over-heating and damage to components.

The oven will function correctly if placed level on a ﬂat surface by adjusting the feets accordingly and using a

spirit level. Screw or unscrew them as necessary to adjust.

5. ELECTRICAL CONNECTION

WARNING: Mains connection must be carried out by a qualified and authorized technician according to

national, international and local laws in the country where it is installed. Before mains connection, ensure

that the frequency (…..V) and voltage (….Hz) meet the requirements indicated in the in the information tag

on the back of the appliance.

The electric system, as prescribed and speciﬁed by the Standard in force, must be equipped with an efﬁcient

ground. It is possible to guarantee the electric safety of the appliance only in the presence of Standard electric

system.

For direct connection to the mains, it is necessary to interpose a device between the equipment and the same

mains, sized for the load, that ensure its disconnection. The contacts must have an opening distance enabling

the full disconnection, in conditions of over-voltage category III, per compliance with installation regulations.

This device also must be located in a place and in a manner to be easily accessible at any moment by the

operator.

OVENS WITH CABLE AND SINGLE PHASE PLUGS

For appliance with cable and plug (single phase 220-240V) the plug merely needs to go into the appropriate

socket (the socket must be adapted for the supplied plug and must withstand the voltage required by the

appliance indicated on the information plate). The product must be positioned so that the plug is always

accessible.

The appliance comes with certiﬁed cable and plug therefore they must not be tampered with or modiﬁed. Only

the cable can be substituted: this must be carried out by a qualiﬁed authorized technician. The earth wire

must always be yellow green.

APPLIANCE NOT SUPPLIED WITH CABLE WITH

THREE PHASE TERMINALS

Articles supplied by us come with terminals such as in the image. To connect to the mains see the label in the

manual and stuck to the lower part of the back of the appliance near the Information Plate .

The oven must be connected to the electricity with a rubber cable such as H07RN-F.

WARNING: the yellow/green voltage wires in the earth cable must be 3cm longer than the others.

The oven must be connected directly to the mains and must have an easily accessible switch from the start

,installed for the device according to the national, international and local laws in the country where it is in-

stalled. This switch must separate polarization guaranteeing complete disconnection in accordance with the

overvoltage III category.

Correct earthing is obligatory and the earth wire must not be operated by the protection switch.

CABLE CONNECTION

Proceed as follows to connect the power supply wire to the terminal board:

• ( A1 ) Loosen the tops of the cable gland and open the bottom part of the back of the appliance by loosening

the screws.

• ( A2 ) Feed the new cable through the cable gland. Connect the cable voltage to the terminal strips following

the connection diagram on the label on the back of the appliance. Only connect what is indicated inserting the

copper bridge and the electricity cable together under the screws, in the tightening direction, so the cable and

the bridge are tightly ﬁxed by tightening the screw. The type of cable to be used (HO7RN-F) is indicated on the

label for each connection and the voltage sections in mm².

• ( A4 ) Close the bottom part of the back of the appliance by tightening the screws and ﬁt the cable by tight

ening the cable gland top.

Erroneous connection could lead to overheating of the terminal board which could lead to blowout and electric

shock.

Check that all the connections are tight before connecting the oven to the mains.

PE = Yellow/Green: “EARTH” protection conductor.

N = Blue: neutral conductor.

L1, L2, L3 = Brown, Grey, Black: live conductors

Check there is no static discharge between live and earth. Check the limit switch continuity between the ex

ternal casing and the earth wire of the mains. It is advised to use a multi tester to carry out these operations.

CABLE SUBSTITUTION

This must be carried out by a qualified authorised technician. The earth wire must always be yellow green.

WARNING: the yellow/green voltage wires in the earth cable must be 3cm longer than the others.

Proceed as follows to connect the power supply wire to the terminal board:

• ( A1 ) Loosen the tops of the cable gland and open the bottom part of the back of the appliance by loosening

the screws.

• ( A3 ) Loosen the terminal screws and feed the cable conductors through. Take out the old cable from the

cable gland.

• ( A2 ) Feed the new cable through the cable gland. Connect the new cable’s conductors to the terminal fol-

lowing the connection diagram on the label at the lower part of the back of the appliance. Only connect what

is indicated inserting the copper bridge and the electricity cable together under the screws, in the tightening

direction, so the cable and the bridge are tightly ﬁxed by tightening the screw. The type of cable to be used

(HO7RN-F) is indicated on the label for each connection and the voltage sections in mm².

• ( A4 ) Close the bottom part of the back of the appliance by tightening the screws and ﬁt the cable by tight-

ening the cable gland top.

Check that all the connections are tight before connecting the oven to the mains.

WARNING: Erroneous connection could lead to overheating of the terminal board which could lead to

blowout and electric shock.

Check there is no static discharge between live and earth. Check the limit switch continuity between the ex-

ternal casing and the earth wire of the mains. It is advised to use a multi tester to carry out these operations

The appliance must be connected to the mains using a H07RN-F cable.

EQUIPOTENTIAL CONNECTION

This connection shall be carried between the different

appliances with the terminal marked by the symbol: (see

image).

This terminal enables the connection of Yellow/Green ca-

ble with a section between 2.5 and 10mm² .

The appliance shall be included in an equipotential sys-

tem whose efﬁciency shall be duly veriﬁed according to

the provisions of the laws in force.

6. WATER CONNECTION

Make sure the device is placed near a water connection.

Before connecting the device,

allow enough water through to remove any remnants in

the piping so that they did not get into the magnetic valves.

It is necessary to install a shut-off valve and mechanical

ﬁlter between the plumbing and the device. On the back of

the device, in the area marked with a label, the convection

oven has an input G 3/4’’ with a ﬁlter.

The inﬂowing water shall have a pressure value com-

prised between 150 (1,5 bar) and 200 kPa (2bar) and a

maximum temperature of 30°C. If the inﬂow pressure

value exceeds 200kPa (2bar), a pressure reducer will have

to be installed, calibrated at 200kPa

(2 bar).

WATER TREATMENT

In order to ensure trouble-free operation of the device, the water should have a hardness of maximum 5°dH to

prevent lime deposits. For higher values a water softening station should be installed ﬁrst.

7. FUMES DISCHARGE

Hot fumes and odours are emitted from the cooking chamber during cooking. This is located at the top part

of the back of the oven. Do not place objects on the discharge so as not to hinder the outﬂow of the fumes

and hence avoid causing damage thereto. It is advisable to position the oven under a suctioning or ensure

adequate ventilation to outside for hot fumes and odours through a pipe no smaller than the oven drainage.

Avoid bends and blockages.

8. STACKING OVENS

Stacking several ovens requires the use of the special kit which keeps the correct distance between the two

ovens.

230V, 1 N ~ 50/60Hz

223369

201836 kg

3,1 kW

do +280°C

Piec konwekcyjny Hendi Nano 4X 450X340 MM

- ELEKTRYCZNY, STEROWANIE MANUALNE

www.hendi.eu

Item

Power consumption Supply Frequency

Weight

9. SPECIFICATION

INFORMATION PLATE

Art./Model: model according to customer classification

Ref: model according to internal manufacturer’s classification

Ser. N°: identification number, different for each product

TYPE: product model according to its technical properties

Power consumption: appliance nominal power kW

Mains supply: TERMINAL CONNECTION TYPE: device tension in V, number of

phases and neutrals (1N = 1 phases more neutral).

Supply frequency: appliance frequency in Hz.

Weight: appliance weight

INSTRUCTIONS FOR THE USER

1. WARNING

The appliance has been designed to cook food in closed premises and must only be used for this purpose: any other

use must, therefore, be avoided as considered improper and dangerous.

The oven must only be used by staff adequately trained for its use.

To avoid the risk of accidents or damages to the appliance, it is also fundamental that staff regularly receive precise

instructions regarding safety.

The appliance is not suitable for use by people with low physical or mental abilities or lacking experience, unless in-

structed regarding the operation of the oven by the personnel in charge of safety their safety.

Do not leave the appliance unattended in presence of children and ensure that the latter do not have access to the

appliance.

Do not under any circumstance, leave ﬂammable material near a appliance: it can be a ﬁre hazard.

Food container temperatures, accessories or other objects can be very hot; beware of burns when moving them. Only

touch them with relevant thermal protection

Careful while opening the oven door: danger of scalding due to high temperature emissions.

The oven is provided with a safety system which automatically disables the operation of the resistances, fans and

vapour supply upon opening the door.

Do not put ﬂammable or alcohol based foods in the oven as they can cause combustion and explosions.

Avoid putting salt on food inside the cooking chamber of the oven. If this cannot be avoided, ensure that it is cleaned as

soon as possible as it can cause damage to the cooking chamber.

Use ﬁngers to regulate the digital panel options; any other object may damage the oven hence nullify the validity of

the warranty

Installation, extraordinary maintenance and repair operations on the equipment must only be carried out by profes-

sionally qualiﬁed staff.

Caution! The outside parts of the oven can exceed a temperature of 60°C, therefore

in order to avoid burning it is advised not to touch the external parts marked by the

symbol shown here.

Damage or breakage of door glass components must be substituted immediately

(contact the Assistence Centre).

When not in use for extended periods (for example 12 hours) it is advisable to

leave the door slightly open.

If it is not in use for long periods of time (many days) it is advisable to turn it off at the mains and disconnect

it from the water supply.

The producer shall not be deemed liable for any damage incurred by persons or properties, caused by non

compliance with the aforementioned instructions of deriving from tampering with even a single part of the

appliance and use of non-genuine spare parts.

This appliance complies with the EU directives in force.

Ensure that the baking tray holders inside the cooking chamber are well ﬁtted to the

walls. Otherwise the baking trays containing food or hot liquids could fall resulting

in scalding.

2. TESTING

The oven should be tested by carrying out a trial cooking session to check that the appliance is working prop-

erly and that there are no problems or malfunctioning. Set the temperature controller at 150° C and the timer

to 10 minutes.

Check every item in the list below:

• The coking chamber light is ON.

• The oven stops (heating, humidiﬁcation, motors/fans) when the door is opened and resumes operating when

the door is closed again. (This only for models with inverter gear)

• On reaching the set temperature, the cooking temperature thermostat turns off the heating elements.

• The fans automatically invert the direction of rotation; the inversion occurs every 2 minutes. Humidiﬁcation

turns off brieﬂy for 20 seconds when the machine is stopped (This only for models with inverter gear)

• The cooking chamber fans spin in the same direction.

• If the oven is equipped with a humidity controller, after using button to activate it, check that water is being

discharged to the fan from the humidity inlet duct in the oven chamber

CLEANING

FIRST CLEANING OF THE COOKING CHAMBER OF THE OVEN

Disconnect electrical power from the appliance and wait until the oven is cooled completely before clean-

ing.

There should never be any residue of solvents or detergents. They should be removed by rinsing thoroughly

using a damp cloth. Appropriate eye, mouth and hand protection should be used. Possible danger of corrosion.

Heat the oven empty up to 200° C (392° F) for about 30 minutes so as to eliminate thermal insulation odors.

Clean the walls of the cooking chamber using hot water and soap, then rinse; never use aggressive or acid

products

3. ORDINARY MAINTENANCE

The user is solely responsible for ordinary maintenance. The Assistence Centre must be contacted for extraor-

dinary maintenance which requires a specialized authorized technician.

Before cleaning, disconnect the device from the power supply and wait until it is fully cold.

ATTENTION: never clean the device with water jet of pressurised vapour.

ORDINARY CLEANING OF COOKING CHAMBER

At the end of a working day, clean the equipment, both for hygienic reasons and to avoid malfunctioning.

The oven must never be cleaned using direct or high pressure water jets. In the same manner, to clean the

applian¬ce do not use pan-scrubbers, steel brushes or scrapers; it is possible to use stainless steel wool,

rubbing it in the direction of the sheets satin ﬁnish

For manual cleaning follow the procedure below:

• Turn on the appliance and set the temperature to 80°C.

• Leave it on for 10 minutes on steam

• Turn off the appliance and let it cool down

• Remove the side tray racks. Manually remove all removable residues place the removable parts inside

dishwashers.

• To clean the cooking compartment use soapy warm water. Subsequently, all surfaces must be thoroughly

rinsed, being careful to ensure no detergent residues remain.

• To clean the oven external parts, use a damp cloth and a non-aggressive detergent.

• Clean with hot water and soap then rinse.

It is strictly forbidden to wash the cooking chamber in cooking temperatures higher than 70°C, scalding

danger.

Daily cleaning of the oven cooking chamber lining must be carried out with a non-abrasive detergent to

guarantee its full function.

Use plastic bristles or a sponge soave in vinegar and warm water in case of dirt crusts.

Warning: residue fats possibly present in the cooking chamber could catch ﬁre when using the oven, hence it

is advisable to remove them quickly.

Only use products recommended by the manufacturer of the appliance.

EXTERNAL CLEANING

Only use a damp cloth with warm water or products suitable for cleaning stainless steel. Do not use acidic

products or ammonia.

WARNING: the appliance should never be cleaned with high pressure water sprays.

REPLACING LIGHT LAMPS

WARNING: Strictly adhere to the following procedure in order to avoid electrocution or damage to people:

• Disconnect the electrical connection of the oven and leave it to cool.

• take off the side grids that hold the baking trays.

• Unscrew the glass cover “A” while observing “C”. Replace

the lamp “B” with one having the same characteristics.

• Screw back on glass cover “A” while observing washer “C”.

• Put the side grids back on ensuring they are well ﬁtted.

Should the glass lid be broken or damaged, do not use the

oven until the lid is replaced (Contact the Assistence Cen

tre).

4. EXTRAORDINARY MAINTENANCE

It is advisable to have the appliance subjected to periodical checks (at least once per year) by a specialized

authorized technician.

Any maintenance, installation or repair work must be carried out by qualiﬁed authorized personnel by con-

tacting the Assistance Centre. Before carrying out any operation the appliance must be plugged out at the

mains, turn off the water mains taps and wait for it to cool down.

Before moving the appliance from position, check that the electricity and water connections (electric cables

water pipe) are correctly plugged out.

If the appliance is on wheels check that electric cables, pipes or anything else are not damaged while moving

it. Ensure the break is on. Avoid placing the device near heat (such as fryers etc.).

After carrying out the task and replacing the appliance in its initial position, check that the electric and water

are connected correctly.

5. MAINTENANCE IN CASE OF BREAKAGE

If the appliance breaks, disconnect it from the mains and turn off water.

Before ringing Customer Service, check the chart below.

FAILURE CAUSE SOLUTION

The oven doesn't start (This only for

models with inverter gear)

The door is not closed but open Check that the door is closed

Door Micro switch doesn’t work

properly (for oven with inverter

system)

Contact specialised technician for

repair (Assistance Service ).

The fan stops while the oven is on

(This only for models with inverter

gear)

Safety thermostat measure motor

Turn off the oven and wait for the

motor’s thermal protection to reset

itself. If the problem persists call a

specialised repair technician

(Assistance Service).

Motor capacitor break

Contact specialised technician for

repair (Assistance Service ).

Internal light does not work

Loose lamp Correctly ﬁt the lamp into the lamp

holder

Replace the lamp (see ordinary

maintenance )

Blown lamp

There is no water inﬂow from the

humidiﬁer pipes

Water inlet closed Open water inlet

Incorrect connection to the water

supply system

Check connection to the water

supply system

The water ﬁlters are blocked by

impurities at the top

Clean the ﬁlters

Non-uniform cooking

The fans no long invert the direction

of rotation (only model with inverter

system)

Contact specialised technician for

repair (Assistance Service ).

One of the fans not operating

Contact specialised technician for

repair (Assistance Service ).

Failure of one of the resistances

Contact specialised technician for

repair (Assistance Service ).

The oven is completely OFF

Supply voltage failure Restore power supply voltage

Incorrect connection to the power

supply network

Check connection to the power

supply network

Safety thermostat measure

Contact specialised technician for

repair (Assistance Service ).

Water leaking from the gaskets with

the door open

Dirty lining Clean the lining with a damp cloth

Damaged gasket

Contact specialised technician for

repair (Assistance Service ).

Problem regarding the closure of the

door

Contact specialised technician for

repair (Assistance Service ).

If the problem persists we advise you to consult a retailer or manufacturer asking for Assistance Service

specifying the problem and supplying the code (Art.) and appliance Ser N°. This information is provided on

the INFORMATION PLATE on the back of the machine.

SPARE PARTS

Use only authorized parts for product repair. All interventions shall be carried out by authorized and special-

ized technical personnel. Contact the Assistance Centre to request spare parts.

6. ADVICE DURING COOKING

Where the grill is used to cook fatty food such as roasts or poultry it is advisable to insert a container on the

bottom of the cooking chamber to collect the fat during cooking.

While cooking food with full containers or ﬁlled with liquids, ensure they do not spill,

both during and after cooking on taking them out of the oven. Scalding danger!

When ovens are placed on leavening cabinets, stainless steel tables or other ovens,

it is not advisable to use shelves so high that the inside of the oven is not at eye level.

Scalding danger!

Always clean accessories before their usage.

To cook food perfectly and uniformly it is not advised to use deep baking trays because they would prevent the

correct air circulation. There must be a space of at least 2cm between the top tray and food.

To cook uniformly do not overload the oven and make sure baked goods or bread face the right direction to-

ward airﬂow in the cooking chamber.

To counteract the loss of heat through opening the door to put food in the oven, it is advised to preheat to at

least 30 °C higher than the desired cooking temperature.

In case of interventions on the food, leave the door open for the least time possible, so as to prevent the tem-

perature within the oven from dropping to a point of jeopardizing successful cooking.

WARNING: it is advisable to open the door twice: keep the door ajar (3-4 cm) for 4-5’’, then open complete-

ly. This is to prevent heat and steam causing annoyance or burns.

DEFROST

The oven can be used for accelerating the defrosting process for foods to be cooked, by using forced air at

ambient temperature or at lower temperature (depending on the size of the product to be defrosted). This

guarantees quick thawing of frozen products without altering their taste and aspect.

STEAM

The humidiﬁcation system is recommended for more delicate coking of all types of foods. Furthermore, it is

recommended quick defrosting, warming food products without dehydrating or hardening them and for nat-

urally desalting foods preserved by salting. The combination of the steaming function with the conventional

ones allows ﬂexibility of use and saving energy and time, simultaneously maintaining the nutritious and taste

qualities of the food unaltered. an ideal cooking system for all types of food.

The water – injected on the fan – is atomized and passes through the resistance turning into vapour.

WARNING: Satisfactory operation of the moisturizing function requires that the temperature of the thermostat

be set at least at 80--100°C. Steam is rarely produced at lower temperatures and the majority of the water

falls to the bottom of the oven.

Furthermore, good vapour cooking required preheating the oven to the desired temperature before activating

the vapour supply.

PREHEATING

To avoid the effects of heat loss when the oven door is opened to place food inside it is advised to preheat to at

least 30 °C higher than the desired cooking temperature.

7. MECHANICAL OVEN CONTROL PANEL

Only models HENDI: 223352 & 223376

L1 K1 K4

K1 Thermostat knob

K4 Timer knob

L1 Thermostat light

B2 Steam selector (223352 only)

 TIMER SELECTOR

When manual is selected, the oven stays on until someone turns it off.When a certain value is selected,

the oven stays on for that time (2H = 120 minutes maximum).

 THERMOSTAT SELECTOR

This knob allows selecting the desired cooking temperature.

 THERMOSTAT LIGHT

This light is on when the oven heating elements are on therefore the temperature in the cooking chamber

is less than that set by the thermostat dial. When the light goes off it means that the heat is off and that the

cooking chamber has reached the set temperature.

 STEAM SELECTOR

This button enables humidifying for the length of time it stays pressed.

8. MULTIFUNCTION OVEN CONTROL PANEL

Only model HENDI: 223369

K3D4

L3 L1

K1K4

D3 D2

K1 Timer Knob

K3 Cooking selector knob

K4 Thermostat knob

L1 Thermostat light

L3 ON / OFF light

B2 Steam selector

D1 Defrost

D2 Convection

D3 Grill

D4 Grill + convection

 TIMER SELECTOR

When manual is selected, the oven stays on until someone turns it off. When a certain value is selected, the

oven stays on for that time (120 minutes maximum).

 THERMOSTAT SELECTOR

This knob allows selecting the desired cooking temperature.

 THERMOSTAT LIGHT

This light is on when the oven heating elements are on therefore the temperature in the cooking chamber

is less than that set by the thermostat dial. When the light goes off it means that the heat is off and that the

cooking chamber has reached the set temperature.

 STEAM SELECTOR

This button enables humidifying for the length of time it stays pressed.

COOKING SELECTOR

There are 5 positions: Off, Defrost, Convection, Grill, Grill + Convection.

1) When it is set to OFF, the oven is completely off.

2) When it is set to DEFROST the fan is working and heating system is off.

3) When it is set to CONVECTION ,The FAN is running and heating system is on.

4) When it is set GRILL, the oven heating system is on and controlled by thermostat knob. Only the grill heating

element is working, while the circulating resistance around the fans is off.

5) When it is set to GRILL + CONVETION the oven heating system is on and controlled by thermostat knob. The

grill heating element is working and also the circulating resistance around the fans is on.

9. DIGITAL OVEN CONTROL PANEL

Only model HENDI: 223345

B5L5 L11 L6B12 L10

B3 B4 B13 L2

L1 B10

L1 Timer Knob

L2 Cooking selector knob

L5 Thermostat knob

L6 Thermostat light

L10 ON / OFF light

L11 Steam selector

L12 Defrost

B1 Convection

B2 Grill

B3 Grill + convection

B4 Timer selection

B5 Cooking programs

B10 START / STOP cooking

B11 Speed regulation

B12 Increase button

B13 Decrease button

• ON/OFF

When power is supplied to the oven the control panel lights up and the operating display indicates tempera-

ture in cooking chamber.The oven now is ready for operating.

• START/STOP COOKING PROGRAM

This button starts/stops a previously set program or cooking cycle.

• TEMPERATURE SELECTOR

When the oven is on “ON” the temperature display shows the temperature in the cooking chamber.To set the

desired cooking temperature press the temperature selector and press (+) or (-) buttons for INCREASE or

DECREASE. The temperature display will show the set value. Press the temperature button for conﬁrmation

or wait 5 seconds and it will automatically be conﬁrmed. Values go from 30°C to 260°C.

During cooking the CHAMBER display shows actual internal chamber temperature and to see the set tem-

perature you must press “temperature button”. Heating element led is on red when the heat is on and green

when it is off.

• TIMER

Press Timer button, to set the time value by acting on (+) or (-) for INCREASE or DECREASE. The time which

appears on the display must be conﬁrmed pressing the timer button or wait 5 seconds for automatic conﬁr-

mation.

The programmable times range is 999 minutes.

Acting on the timer button if you go under value of “1” on display you will see “----“: means “inﬁnite time” the

oven will continue to work with the set parameters until START/STOP button is pressed. The time display will

start count-up so you can see from how long the oven is operating.

In case you set minutes on the time display will start countdown during cooking.

• STEAM

Enables humidifying in manual cooking or to program the various humidity settings during process.

- Humidifying in manual cooking: during cooking, the STEAM button enables the release of steam into the

cooking chamber for as long as it is pressed. The STEAM led will be on. If the motor turns the other way (only

for models with inverter system), humidifying will stop brieﬂy.

- To program automatic humidifying during cooking: after pressing the STEAM button, it is possible to in-

crease or decrease the humidity by pressing + / -. It ranges from: OFF – 20% - 40% - 60% - 80% - 100%.

During programming the values ﬂash on the display and pressing STEAM again will memorize them or wait 5

seconds for automatic conﬁrmation.

- During cooking, the STEAM led goes on when steam is being released into the cooking chamber and it stop

brieﬂy when the motor turns the other way (only models with inverter system).

- During cooking, keeping the STEAM button pressed enables manual humidifying at any time for as long as

it is pressed.

The set of humidiﬁcation is allowed only before running a cycle. To change the set of humidiﬁcation: press

STEAM button and on the Display 1 show „hum”, the Display 2 (DISP2) show ﬂashing the set-humidiﬁes, with

+ / - button you change its value.

Strona jest ładowana ...

Hendi 223031 Instrukcja obsługi

Marka: Hendi

Model: 223031

Kategoria: Piekarniki

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

English: Hendi 223031 User manual

Hendi 223031 Instrukcja obsługi

Hendi 223031 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty