One For All URC-7781 Instrukcja obsługi

URC-7781

706159

ONE FOR ALL

Universal remote

Universal Fernbedienung

Télécommande universelle

Mando a Distancia Universal

Telecomando Universal

Telecomando Universale

Universele Afstandsbediening

Univerzális távvezérlő

Uniwersalny pilot zdalnego sterowania

Univerzální dálkové ovládání

URC-7781

RDN-1160707

Universal Electronics BV

Europe & International

P.O. Box 3332

7500 DH, Enschede

The Netherlands

URC-7781

706159

English

UNIVERSAL ELECTRONICS INC./ONE FOR ALL warrants to the original purchaser that this product will be free from defects in

materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This

product will be replaced free of charge if it has been proven to be defective within the one (1) year warranty period. This warranty

does not cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in connection with the product.

Any further obligation than listed above is excluded. To obtain warranty service during the warranty period, please call us at the

number mentioned on the Customer Service page. Please notice that we need your purchase receipt so that we may establish your

eligibility for service.

If you have bought this product for purposes which are not related to your trade, business or profession, please remind that you

may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those

rights.

Deutsch

UNIVERSAL ELECTRONICS INC./ONE FOR ALL garantiert dem Kunden, dass dieses Produkt bei sachgemässem und ordentlichem

Gebrauch für die dauer eines Jahres volkommen frei von Defekten materieller oder technischer Art bleiben wird, gerechnet ab

Kaufdatum. Falls erwiesen werden kann, dass innerhalb der Garantiezeit eines Jahres ein Defekt entstanden ist, wird dieses Produkt

gebührenfrei ersetzt, falls besagtes Produkt innerhalb der Garantiezeit auf Kosten des Kunden zurückgeschickt wird. Diese Garantie

erstreckt sich nicht auf Verpackungen, Transportbehältnisse, Batterien, zerbrochene oder beschädigte Gehäuse oder ander Objekte,

die in Verbindung mit dem Produkt verwendet werden. Jegliche weitere Verpflichtung als die oben aufgeführte wird

ausgeschlossen. Um unseren Garantiesevice innerhalb der Garantiezeit in Anspruch nehmen zu können, wählen Sie bitte die

Nummer die Sie auf der Kundendienstseite finden um weitere Instruktionen zu erhalten. Bitte beachten Sie, dass wir Ihren

Kaufbeleg brauchen um fest zu stellen ob Sie Anspruch auf unseren Garantieservice erheben können.

Wenn Sie dieses Produkt nicht für den Zweck gekauft haben, die mit Ihrem Handel, Geschäft oder Beruf zusammenhängen,

beachten Sie bitte, dass es verbriefte Rechte unter Ihrer staatlichen Gesetzgebung geben kann, die den Verkauf der

Verbrauchsgüter regelt. Diese Garantie beeinflusst nicht jene Rechte.

Français

UNIVERSAL ELECTRONICS INC./ONE FOR ALL garantit à l’acheteur d’origine que ce produit est certifié franc de défauts matériels et

de main d’œuvre durant une période d’un (1) an à partir de la date d’achat original à la condition exclusive que ce produit ait été

utilisé de manière normale et correcte. Ce produit sera remplacé gratuitement s’il s’estrévélé défectueux pendant ladite période

d’un (1) an, produit devant être retourné à la charge du client durant la période de garantie. Cette garantie ne saurait couvrir

d’aucune manière que ce soit emballages en carton, coffrets portables quelconques, piles, corps d`appareil cassé ou endommagé

ou tout autre article utilisé en combinaison avec ce produit. Nous nous réservons le droit de rejeter tout autre engagement que

ceux cités plus haut. Pour pouvoir obtenir le service de garantie durant la période de garantie, veuillez nous contacter au numèro

mentionné sur la page ”Service Consommateurs”pour les instructions nécessaires. Veuillez noter que la preuve d’achat est

obligatoire afin de pouvoir déterminer votre droit à ce service.

Si vous avez acheté ce produit sans raison commerciale ni professionnelle, veuillez noter qu’il est possible que la législation de

protection des consommateurs de votre pays vous donne certains droits. Cette garantie n’affectera pas ces droits.

Español

UNIVERSAL ELECTRONICS/ONE FOR ALL garantiza al comprador que este producto estará libre de defectos materiales o de

fabrcación, al menos durate 1 año desde la fecha actual de su adquisición ,y en caso de que se utilice de un modo normal y

correcto. Este producto será sustituido de forma gratuita siempre y cuando se pueda demostrar que es defectuoso y que esto haya

sucedido dentro del año de garantía, corriendo a cuenta del comprador los gastos de su devolución. Esta garantia no cubre

embalajes, maletines, envoltorios, pilas, armarios u otros objetos utilizados en conexión con este producto. Se excluyen otras

obligciones, cualesquiera que sean, además de las mencionadas más arriba. Para obtener servicio de garantía dentro del período

correspondiente a ésta, por favor, llámenos al número de teléfono que se menciona en la página de Servicio de Atención al Cliente.

Por favor, asegúrese de tener su recibo o ticket de compra para que podamos establecer su legitimidad a este servicio.

Si ha adquirido este producto con propósitos que no estén relacionados con su comercio, negocio o profesión, por favor recuerde

que es posible que según la legislación de su país tenga derechos legales en cuanto a la venta de productos para el consumidor.

Esta garantía no afecta a esos derechos.

Português

A UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a a protecção deste produto no que respeita a defeitos de fabrico

de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra do mesmo produto. Este produto

será substituido sem qualquer encargo no caso de ter sido comprovada qualquer avaria dentro do período de 1 ano e após o seu

retorno ( custos de envio da responsabilidade do consumidor ) dentro deste mesmo prazo. Esta garantia não cobre embalagens de

cartão , caixas , pilhas, ou outros items usados em conjunto com este produto. Qualquer outra obrigação para além daquela acima

descrita não será tida em consideração. Para obter o serviço de garantia durante o período a este destinado, para mais informações

contacte-nos no número mencionado na página do Serviço de Apoio ao Cliente. Por favor tome nota que ser-lhe á pedido o

comprovativo de compra, de forma a que possamos confirmar a sua legitimidade para este serviço. Se você comprou este produto

para propósitos que não estejam relacionados ao seu negócio ou profissão, por favor tenha em conta que você pode ter direitos

legais baixo a sua legislação nacional que governa a venda de produtos de consumidores. Esta garantia não afecta esses direitos.

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 1

Bedienungsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S. 31

Mode d’emploi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 61

Guía del usario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 91

Manual de instruções . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 121

Istruzioni per l’uso . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 151

Gebruiksaanwijzing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 181

Használati útmutató

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 211

Instrukcja obsługi

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 241

Návod k použití

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 271

English

Deutsch

Français

Español

Português

Italiano

Nederlands

Magyar

Polski

Česky

12_Device_7781_omslag_Euro_10T:12_Device_7780_omslag 17-07-2007 15:42 Pagina 1

WWW.ONEF ORALL .COM 1

Table of Contents

Englis

h

P

ICTURE OF URC-7781 REMOTE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

ABOUT YOUR URC-7781 .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

T

HE KEYPAD

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

I

NSTALLING THE BATTERIES

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

SETTING THE LANGUAGE, DAY AND TIME .

. . . . . . . . . . . . . . . . . . . . . .

5

S

ETTING UP THE URC-7781

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

(

How to set up the URC-7781 to control your devices)

CODES

TV : Television / LCD / Plasma / Projector / Rear Projector

.

. . . . . . . . . . . . . . .

301

V

CR : Video Cassette Recorder / TV/VCR Combi / DVD/VCR Combi / PVR

. . . . . .

3

06

SAT : Satellite Receiver / Set-Top-Box / DVB-S / DVB-T / Freeview (UK)

/ TNT (F) / Digitenne (NL) / SAT/HDD

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

308

C

BL : Cable Converter / Set-Top-Box / DVB-C

.

. . . . . . . . . . . . . . . . . . . . . . . . .

3

10

V

AC : Video Accessory like Media Centres / AV Accessories / AV Selectors

. . . . .

3

10

C

D : CD Player / CD-R / MD

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

10

PHO : Phonograph

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

311

MIS : Audio / Miscellaneous Audio

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

311

H

OM : Home Automation (e.g. IR controlled curtains / IR controlled

l

ight switches etc.)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

11

AMP : Audio / Amplifier / Active Speaker System

. . . . . . . . . . . . . . . . . . . . . . . .

311

RCV : Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home Cinema

. . . . . . . .

311

C

AS : Cassette Player (Tape Deck)

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

12

L

DP : Laser Disc Player / Video CD

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

12

DAT : Digital Audio Tape / DCC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

312

D

VD : DVD Player / DVD-R / DVD Home Cinema / DVD Combi / DVD/HDD

. . . . .

3

12

V

IEW THE CURRENT CODE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Q

UICK CODE REFERENCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

REPLACE A DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

CHANGING A DEVICE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

MOVE A DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

DELETE A DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

THE LEARNING FEATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

(How to copy functions from your original working remote

onto the URC-7781)

OPERATIONAL RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

EXTRA FEATURES

• Colour, Brightness and Sleep

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

• Changing the device label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

• Volume Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

• Macro (sequence of commands)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

• Home Theatre

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

• Code upgrade technology

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

• Key Magic® (How to program missing functions)

. . . . . . . . . . . . . . . . . . . . .

25

• Delete Learning and Key Magic

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

• ONE FOR ALL Light Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

CUSTOMER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 1

2 WWW.ONEF ORALL.COM

Picture of URC-7781

Your URC-7781 requires 4 new “AAA/LR03” alkaline batteries.

Your URC-7781 can operate 12 devices:

TV : Television / LCD / Plasma / Projector / Rear Projector

VCR : Video Cassette Recorder / TV/VCR Combi / DVD/VCR Combi / PVR

SAT : Satellite Receiver / Set-Top-Box / DVB-S / DVB-T / Freeview (UK) / TNT

(F) / Digitenne (NL) / SAT/HDD

CBL : Cable Converter / Set-Top-Box / DVB-C

VAC : Video Accessory like Media Centres / AV Accessories / AV Selectors

CD : CD Player / CD-R / MD

PHO : Phonograph

MIS : Audio / Miscellaneous Audio

HOM : Home Automation (e.g. IR controlled curtains / IR controlled light

switches etc.)

AMP : Audio / Amplifier / Active Speaker System

RCV : Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home Cinema

CAS : Cassette Player (Tape Deck)

LDP : Laser Disc Player / Video CD

DAT : Digital Audio Tape / DCC

DVD : DVD Player / DVD-R / DVD Home Cinema / DVD Combi / DVD/HDD

The URC-7781 universal remote comes with a built in modem which allows you

to download codes that may not be pre-programmed in the memory. This means

that the URC-7781 will never become obsolete.

Also, what makes the URC-7781 even more unique is the „Learning“ feature, which

allows you to customise any of the special functions of your original remote control onto

the keypad of your new URC-7781. The following pages explain in simple steps how to

customise the URC-7781 to your devices.

About Your URC-7781

11

1

2

4

6

8

5

10

1

3

1

4

17/18

9

2

1

19

15

7

16

3

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 2

WW W.ONEFORALL.COM 3

The Keypad

See picture of URC-7781 remote on page 2.

1 MAGIC Key

The MAGIC key is used to set up your URC-7781.

2 POWER (LED)

The POWER key operates the same function it did on your original

remote control. When pressing MAGIC then POWER you will obtain the

Sleep function. When you press and hold down the MAGIC key the LED

underneath the POWER key will light up twice and you will enter

programming mode.

3 LIGHT (ESC) Key

The LIGHT key lights up the LCD screen and keypad of the URC-7781.

This key will also allow you to return (escape) to the previous screen

within programming mode. If you want to exit programming mode

and return to user mode simply press and hold down the LIGHT key.

4 LCD screen

The URC-7781 can be simply programmed following the indications on

the LCD screen. During set-up the URC-7781 will list the 12 possible

device groups. The currently active device is shown in the middle of the

screen – indicated by: .

TV : (T) - Television / LCD / Plasma / Projector / Rear Projector

VCR : (V) - Video Cassette Recorder / TV/VCR Combi / DVD/VCR Combi / PVR

SAT : (S) - Satellite Receiver / Set-Top-Box / DVB-S / DVB-T / Freeview (UK) /

TNT (F) / Digitenne (NL) / SAT/HDD

CBL : (C) - Cable Converter / Set-Top-Box / DVB-C

VAC : (N) - Video Accessory like Media Centres / AV Accessories / AV Selectors

CD : (D) - CD Player / CD-R / MD

PHO : (P) - Phonograph

MIS : (M)- Audio / Miscellaneous Audio

HOM : (H) - Home Automation (e.g. IR controlled curtains / IR controlled light

switches etc.)

AMP : (A) - Audio / Amplifier / Active Speaker System

RCV : (R) - Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home Cinema

CAS : (K) - Cassette Player (Tape Deck)

LDP : (L) - Laser Disc Player / Video CD

DAT : (J) - Digital Audio Tape / DCC

DVD : (Y) - DVD Player / DVD-R / DVD Home Cinema / DVD Combi / DVD/HDD

The type of code is indicated in brackets e.g. (T). When setting up your device a device

code will be displayed as e.g. T0556.

T - indicates the device type (TV code)

0556 – indicates a four-digit-code found under Philips.

It is also possible to rename/change a device label using a max of 4 characters

(see page 15).

5 Left / ENTER / Right

These keys allow you to scroll through and confirm your choices in the

remote’s “Programming menu”. When changing the device label you

can scroll through the “alphabet“, “digits” and “special symbols”

(. _ ^<) pressing the ENTER key to select the desired letter, digit or

symbol.

6 Number Keys (0-9, -/- -, AV)

The Number keys (0-9, -/—, AV) provide functions just like your original

remote, such as direct access to channel selection. If your original

remote uses one/two digit input switching (-/— symbol), this function

can be obtained by pressing the -/— key. If your original remote has a

10 key, this function can also be found under the -/— key. If your

original remote has a 20 key, this function can be found under the AV

key. In Audio (RCV, AMP, MIS) mode the Number keys may provide

source (input) selection.

7 AV key

In TV mode you will obtain the AV / Input function. In VCR mode you

will obtain the “AV” function, if available on your original remote. In

Audio (RCV, AMP, MIS) mode you will obtain the input/source function.

In DVD mode you will obtain the “TV/DVD” function, if available on

your original remote. In SAT mode you will obtain the “TV/SAT” or

“TV/DTV” function, if available on your original remote.

8 Channel +/- Keys

These keys operate the same function it did on your original remote

control. In TV mode these keys provide you the Brightness +/- when

pressing MAGIC then CH+/-. In Audio (RCV, AMP, MIS) mode these keys

will provide PRESET Up/Down.

9 MUTE Key

The Mute key operates the same function it did on your original remote

control.

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 3

4 WWW. ONEFORALL.COM

The Keypad

10 MENU Key

The MENU key controls the same function as it did on your original

remote.

11 Volume +/- Keys

These keys operate the same function it did on your original remote

control. In TV mode these keys provide you the Color +/- when pressing

MAGIC then VOL+/-.

12 Directional Keys

If available on your original remote, these keys will allow you to

navigate through the menu mode of your device.

13 OK

The OK key will confirm your choice in menu operation of your device.

14 Guide

In TV and/or SAT mode you will obtain the “Guide” or “Previous

Program” function, if available on your original remote. In VCR mode

you will obtain the “TV/VCR” or “Eject” function, if available on your

original remote. In AMP, RCV or MIS mode you will obtain the “Tune

Down” function, if available on your original remote. In CD mode you

will obtain the “Eject” or “Open/Close” function, if available on your

original remote.

15 Exit

In all modes you will obtain the “Menu Exit” function, if available on

your original remote. In SAT menu mode you may obtain the “back”

key to go to the previous menu screen.

16 16:9

In TV mode this key provides you the (16:9) wide screen view function,

if available on your original remote. In SAT mode you will obtain the

“Favorite” or “Info” function, if available on your original remote. In

DVD mode you will obtain “Zoom” or “Random”. In VCR mode you will

obtain “SP/LP”. In AMP, RCV or MIS mode you will obtain “Tune Up”.

17 Transport keys

These keys operate the transport functions (PLAY, FF, REW etc.) of

your device. To prevent accidental recording, the RECORD key must

be pressed twice to start recording.

18 Teletext Keys

The transport keys (REW, STOP, REC, FF) are used to operate the main

Teletext functions. The symbols below the keys are for Teletext. The text

keys are used to access the Teletext functions of your device. Of course,

your device must have Teletext capability.

TEXT ON: Puts the device (TV and/or SAT) in the Teletext mode.

HOLD/STOP: Stops changing pages.

EXPAND: Shows the top half of the Teletext page in larger letters.

By pressing again, you can see the bottom half of the Teletext page

enlarged. To return to regular Teletext viewing, press the EXPAND

key again, or press the TEXT ON key, depending on your television.

TEXT OFF: Switches the device (TV and/or SAT) back to regular viewing mode.

On some devices, this may be done by pressing the TEXT ON key

several times.

In TV mode when in text mode, the keys marked red, green, yellow and blue, allow you

to access the Fastext functions of your television. If on your original remote control these

keys are used for Menu navigation, the URC-7781 Fastext keys may operate in the same

way.

19 Custom keys (A, B, C, D)

The Custom Keys are spare keys which give you the possibility to

customise the URC-7781 remote using the learning and Key Magic®

features (page 11 and 25). These keys can also be used to program

Macros (see page 18).

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 4

SET DAY

SUN MON TUE

ENTER

WW W.ONEFORALL.COM

5

Installing the Batteries

Setting the Language, Day and Time

Your URC-7781 requires 4 new “AAA/LR03” alkaline batteries.

1 Remove the battery cover from the back of your URC-7781.

2 Match the batteries to the + and - marks inside the battery case, then insert

the batteries.

3 Press the battery cover back in place.

Important notes:

- Do not use rechargeable batteries.

- Upon changing the batteries, your set-up codes and advanced programming

will be retained.

1. After inserting the batteries...

will appear on the screen. Press ENTER

to confirm.

2. Set the language to ENGLISH,

GERMAN (DEUTSCH) or FRENCH

(FRANÇAIS) using the ARROW keys.

Press ENTER to confirm the language

of your choice (e.g. ENGLISH).

The LED underneath the POWER Key will

light up twice. From now on all programming

features will be displayed in the selected language.

3. “SET DAY” will appear on the screen.

Press ENTER to confirm.

4. Select the corresponding day using

the ARROW keys and confirm by

pressing ENTER. The LED underneath

the POWER key will light up twice.

5. “SET TIME” will appear on the screen.

Press “ENTER” to confirm.

6. Enter the corresponding time using

the number keys and confirm by

pressing “ENTER”. The LED underneath

the POWER key will light up twice.

“ADD DEVICE” will appear on the screen.

Please continue on page 6 to set up the URC-7781 to control your devices.

Note: After the remote has been completely setup, to change the Language, Day or

Time again you need to enter programming mode. To do so press and hold MAGIC

until “INITIAL SETUP” appears on the screen. Next press ENTER, and “DEVICE” will

appear on the screen. Next use the ARROW keys to scroll to “LANGUAGE” or

“DAY/TIME” depending on what you require to change.

LANGUAGE

SET DAY

SET TIME

00:00

ADD DEVICE

SET LANGUAGE

ENGLISH

ENTER

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 5

ADD DEVICE

PHO TV VCR

TV

T0556

6 WWW. ONEFORALL.COM

Setting up the URC-7781

How to set up the URC-7781 to control your devices

Example: To set up the URC-7781 for your Television:

Find the code for your device in the Code list (page 301 - 315). Codes are list-

ed by device type and brand name. The most popular code is listed first. Make

sure your device is switched on (not on standby).

If your brand is not listed at all, the URC-7781 gives you the possibility to scan

through all the codes contained in the memory for your specific device (in that case,

as explained in see step 4, use the ARROW Left / Right keys instead of the digits).

The display will read...

Press ENTER.

Select the device you wish to set up

using the ARROW left/right keys and

confirm pressing ENTER. Now you will

see CODE SET UP. Press ENTER again.

Simply use the number keys to enter

the first four-digit device code

corresponding to your brand listed

in the code list (pages 301 - 315). The LED

underneath the POWER key will light up twice.

Aim the URC-7781 at your device and press POWER.

—> IF your device switches OFF, switch your device back ON (e.g. press CH+ to

switch ON your TV) and try all the remote’s functions to ensure they are

working properly.

—> IF some functions do not work properly or if your device does not respond at

all, please try the next four-digit device code listed under your brand (pages

301 - 315).

SEARCH METHOD: Each time you press the ARROW Left of Right key, this will display

the previous or next code in the memory and send POWER of that

code.

- Do not use the digits to test if the code works as this will change the current code.

- If your device does not respond to the URC-7781 after you have tried all the codes

(page 301 - 315) listed for your brand………or…….if your brand is not listed at

all…….simply press the “ARROW right” key to scroll to the next code contained in

the memory (for your specific device).

As soon as all the remote’s functions are working properly

press ENTER to store this code.

Make sure to write down your code on page 8 for easy future reference.

—> When setting up the URC-7781 for the first time please follow steps 1 – 6.

—> If already in User Mode you need to follow steps a and b then 1 - 6.

a Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

b Press ENTER twice...

will appear on the screen.

ENTER

ADD DEVICE

ENTER

INITIAL

SETUP

ADD DEVICE

ENTER

1

2

3

4

5

6

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 6

WWW.ONEF ORALL .COM 7

Setting up the URC-7781

The URC-7781 will display a code as e.g. T0556.

T = Device Type Indicator

0556 = 4-digit-code

- Use the LIGHT key to return to the previous screen.

- Press and hold down the LIGHT key to return to user mode.

-

Use the LIGHT (ESC) key to return to the previous screen.

- Press and hold down the LIGHT (ESC) key to exit programming mode and return

to the user mode.

-

If your device’s original remote control does not have a POWER key, press PLAY

i

nstead of POWER when setting up your device.

- Remember to select the corresponding device mode before operating your device.

F

or your convenience it is possible to rename the Device Label (max 4 characters)

s

ee page 15.

Device

Label

T

V

VCR

S

AT

CBL

VAC

CD

PHO

MIS

HOM

AMP

RCV

CAS

LDP

DAT

DVD

Device

type

indicator

T

V

S

C

N

D

P

M

H

A

R

K

L

J

Y

Corresponding Devices

T

elevision / LCD / Plasma / Projector / Rear Projector

V

ideo Cassette Recorder / TV/VCR Combi / DVD/VCR

C

ombi / PVR

Satellite Receiver / Set-Top-Box / DVB-S / DVB-T /

F

reeview (UK) / TNT (F) / Digitenne (NL) / SAT/HDD

Cable Converter / Set-Top-Box / DVB-C

Video Accessory like Media Centres / AV Accessories /

A

V Selectors

CD Player / CD-R / MD

P

honograph

A

udio / Miscellaneous Audio

Home Automation (e.g. IR controlled curtains /

IR controlled light switches etc.)

Audio / Amplifier / Active Speaker System

Audio / Audio Receiver/Tuner/Amplifier / (DVD)

Home Cinema

Cassette Player (Tape Deck)

Laser Disc Player / Video CD

Digital Audio Tape / DCC

DVD Player / DVD-R / DVD Home Cinema / DVD

Combi / DVD/HDD

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 7

ENTER

TV

T0556

DEV TO REPLACE

PHO TV VCR

REPLACE WITH

PHO TV VCR

INITIAL

SETUP

ADD DEVICE

VIEW CODE

INITIAL

SETUP

ADD DEVICE

REPLACE DEVICE

8 WWW. ONEFORALL.COM

View the current code

Quick Code Reference

Replace a device

Once you have Set-Up your URC-7781, you can view your SET-UP CODE for future

reference.

Example: To view the code saved for your TV:

1 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

2 Press ENTER twice...

will appear on the screen.

3 Press the ARROW Left key twice...

will appear on the screen.

4 Press ENTER and the code for your current

device will be displayed. Press the ARROW

LEFT/RIGHT keys to view the codes of your

other devices. Please write down your codes

in the boxes below.

To prevent having a device programmed that you are not using anymore it is

possible to replace this e.g. if you just bought a new TV and DVD player/recorder to

replace your old TV and Video Recorder it is not necessary to have your old TV and Video

Recorder still programmed on your URC-7781.

1 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

2 Press ENTER twice...

will appear on the screen.

3 Press ARROW Right...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

Select the “Device you wish

replace” using the ARROW

left/right keys.

5 Press ENTER...

will appear on the screen.

Select the “Device you wish to

replace it with” using the ARROW

left/right keys and confirm pressing

ENTER. Now you will see “CODE SETUP”. Press ENTER.

From here enter the codes corresponding to “device type” and “brand “ of your device

as explained on page 6.

Device

Type Code

1. _____________

2. _____________

3. _____________

4. _____________

5. _____________

6. _____________

Device

Type Code

7. _____________

8. _____________

9. _____________

10. _____________

11. _____________

12. _____________

ENTER

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 8

WW W.ONEFORALL.COM 9

CHANGE DEV CODE

DVD TV SAT

TV

T0556

INITIAL

SETUP

ADD DEVICE

CHANGE DEVICE

CODE

Changing the Device Code

The following example explains how to replace the old device code with a new device

code without having to ADD a new device.

Example: You just bought a new TV for your living room. This TV may be using a

different code than your current TV in your living room. Just follow the next steps

to change the current programmed device code.

Note: When changing the device code, all settings of the currently setup device

(Key Magic, Learning) will be retained.

1 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

2 Press ENTER twice...

will appear on the screen.

3 Press RIGHT ARROW key twice...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Select the mode for which you want

to change the setup code using

the ARROW left/right keys and confirm

pressing ENTER.

…

will appear on the screen.

Press ENTER to confirm.

Next go to page 6

and follow the instructions from

step 4 onwards.

ENTER

x2

ENTER

CODE SETUP

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 9

10 WWW. ONEFORALL.COM

INITIAL

SETUP

ADD DEVICE

MOVE DEVICE

Move a device

Once you programmed several devices it is possible to determine the order of

appearance of the device labels.

Example: If you programmed a Television, DVD-player, Video Recorder and Satellite

Receiver the sequence of appearance may be TV, DVD, VCR, SAT. You may want to

change the order of appearance into TV, VCR, DVD, SAT.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ENTER twice...

will appear on the screen.

3 Press ARROW Right three times...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Select the Device you wish to

move to a different location using

the ARROW left/right keys and confirm

pressing ENTER.

…

6 will appear on the screen.

Use the ARROW left/right keys to move

the corresponding device and confirm

pressing ENTER.

The LED underneath the POWER key will light up twice and you will return to MOVE

DEVICE.

ENTER

x2

ENTER

Delete a device

To delete a certain device please follow the next steps.

1 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

2 Press ENTER twice...

will appear on the screen.

3 Press ARROW Left key once...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Select the Device you wish to

delete using the ARROW

left/right keys and confirm

pressing ENTER.

The LED underneath the POWER key will light up twice and you will return to DELETE

DEVICE.

Result: The selected device has been deleted.

x3

INITIAL

SETUP

ADD DEVICE

DELETE DEVICE

ENTER

x2

ENTER

DELETE DEVICE

MOVE TO

TV VCR DVD

TV

T0556

DEV TO MOVE

DVD VCR SAT

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 10

WW W.ONEFORALL.COM 11

INITIAL

SETUP

ADVANCED

SETUP

LEARNING NOW!

PRESS ORIG.KEY

The Learning Feature

The URC-7781 comes with a complete library of pre-programmed codes. After you have

set up the URC-7781 for your device, you may find that there are one or more keys that

you had on your original remote, which do not have a place on the URC-7781 keypad.

As a convenience, the URC-7781 offers a special Learning feature that allows you to copy

any function from your original remote control onto the keypad of the URC-7781.

Before you start:

- Make sure your original remote control is working correctly.

- Make sure neither your URC-7781, nor your original remote control is pointing at

your device.

Learning

Example: To copy the “mono/stereo” function from your original TV

remote onto the A-key of your URC-7781.

1 Place both remote controls (the URC-7781 and your original) on a flat

surface. Make sure the ends which you normally point at your device are

facing each other. Keep the remotes at a distance of 2 to 5 cm.

2 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

3 Press ARROW Right...

will appear on the screen.

4 Press ENTER 4 times…

will appear on the screen.

Use the ARROW keys to scroll

to the device mode in which you want

to place the learned function (e.g. TV).

5 Press the key (on the URC-7781

remote) where you want to place

the learned function (Example: A

key). The LED underneath the POWER

key will flash rapidly and...

will appear on the screen.

6 Press the key (on your original remote) that you want to copy on the URC-7781.

(Example: “mono/stereo” key). The LED underneath the POWER key will light up

twice to confirm that the function mono/stereo has been learned successfully onto

the A key.

NOTE: If you want to copy other functions within the same

mode, simply repeat steps 5

and 6 pressing the next key you want to copy by learning.

NOTE: If you want to copy other functions in a different

device mode, in step 4 select a

different device mode by using the ARROW Left / Right keys and continue with

steps 5 and 6.

NOTE: If the display reads LEARNING FAILED, press ENTER to start from “ADD

LEARNING” and press ENTER to continue with step 4.

NOTE: If the display reads MEMORY FULL you need to prioritise the functions you want

and delete the functions with the lowest priority

7 Press LIGHT once to go back to ADD LEARNING….or…. press and

hold LIGHT to exit programming mode.

- Use the LIGHT key to return to the previous screen.

- Press and hold down the LIGHT key to return to user mode.

ENTER

x4

SELECT MODE & KEY

RCV TV DVD

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 11

12 WWW.ONEF ORALL.COM

The Learning Feature

-

Learning is mode specific. To access your learned function, you need to scroll to the

a

ppropriate device first.

- A learned function can be assigned to any key except the ENTER, LIGHT (ESC),

ARROW Left/Right keys and the MAGIC key.

-

If no key is pressed, the URC-7781 will stay for 30 seconds in programming mode.

-

After step 5 you have 15 seconds to press the corresponding key on your original

remote.

- If you learn a function on another key than the „custom keys“, the original

U

RC-7781 function automatically becomes shifted. You can press MAGIC then

t

he key to access it (this excludes the POWER, Channel and Volume keys and

Digits – Press MAGIC twice and then the digit to access it).

- If a Shifted Learned function is placed on the Power, Channel and Volume keys then

S

leep and Colour/Brightness will be sacrificed.

-

The Learning feature is mode specific. Therefore you can place one learned function

per mode on the same key.

- The URC-7781 can learn approximately 50 functions (depending on the original

r

emote).

-

You can replace a learned function by placing another learned function on top or by

using “Delete Learning from One Key”, “Delete Learning from One Mode”, “Delete

Learning from All Modes”.

-

Learning should not be done in direct sunlight or under incandescent lights.

-

Make sure you are using new batteries before following the learning instructions.

-

Upon changing the batteries, your learned functions will be retained.

- It’s not possible to program functions by learning in the Home Theatre mode.

H

owever, if a key has been programmed in the original device mode with learning

t

hen this function will be carried over to the Home Theatre mode.

Shifted Learning

Y

ou can also learn a function on a key of the URC-7781 without sacrificing the original

U

RC-7781 function. The „custom keys“ are an ideal location for this. A Shifted Learning

f

unction can also be put on almost any other key except for the following: MAGIC key,

ARROW Left / Right, Enter and LIGHT (ESC). To install a Shifted Learning function, simply

f

ollow steps 1-7 on the previous page. During step 5, press MAGIC once before you press

the key where you are placing the learned function. To access the shifted function, press

M

AGIC and then the key you have learned on. To access the shifted function on a digit

k

ey press MAGIC twice and then the corresponding digit.

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 12

SELECT MODE &KEY

RCV TV

SELECT MODE &KEY

RCV TV

WW W.ONEFORALL.COM

13

The Learning Feature

Delete Learning

It is possible to…..

- delete a learned function from a specific key within a specific device mode.

- delete all learned functions within a specific mode.

- delete all learned functions within all device modes.

Example: to delete the copied mono/stereo function from the A key in the TV mode:

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ARROW Right...

will appear on the screen.

3 Press ENTER twice...

will appear on the screen.

4 Press ARROW Right..

will appear on the screen.

5 Press ENTER...

will appear on the screen.

6 Press ENTER...

will appear on the screen.

7 Press ENTER...

will appear on the screen.

8 Select the corresponding device mode (Example: TV mode) in

which you want to delete the learned function by using the

ARROW left / right keys and press the key * you wish to delete

(Example: A key). The LED will blink twice and the screen will

go back to “DELETE LEARNING”.

9 If there is another key which you wish to delete, repeat steps 6 - 8.

Result: The original function on the A key in TV mode will now be present.

* To delete a Shifted Learned feature, press MAGIC before you press the learned

key to be deleted.

6 You will see…

Press ENTER.

7 Select the corresponding

device mode in which you want

to delete all learned functions

by using the ARROW left / right

keys and press ENTER. The LED underneath the POWER key

will light up twice and the screen will go back to ”DELETE

LEARNING”. All the learned functions have now been cleared

from the selected device mode.

6 You will see…

7 Press ENTER. The LED underneath the

POWER key will light up twice and

the screen will go back to ”DELETE LEARNING”. All the learned

functions have now been cleared from all device modes.

- Use the LIGHT key to return to the previous screen.

- Press and hold down the LIGHT key to return to user mode.

INITIAL

SETUP

ADVANCED

SETUP

ADD

FUNCTION

DELETE

FUNCTION

DELETE LEARNING

FROM ONE KEY

DELETE LEARNING

FROM ONE MODE

DELETE LEARNING

FROM ALL MODES

ENTER

x2

ENTER

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 13

14 WWW. ONEFORALL.COM

Operational Reset

Extra Features

The Operational Reset will erase all learned functions across all modes and

some other programmed functions like Language, Volume Lock, Key Magic,

Timed Macro, Key Macro, Home Theatre and Device Labels.

1 Press and hold down MAGIC for

about 3 sec. and...

will appear on the screen.

2 Press ARROW Right ...

will appear on the screen.

3 Press ENTER once...

will appear on the screen.

4 Press ARROW Left...

will appear on the screen.

5 Press ENTER...

will appear on the screen.

6 Press ENTER.

The LED underneath the POWER key

will light up 4 times...

will appear on the screen.

All your devices are still setup, but all features like Language, Volume Lock, Key Magic,

Timed Macro, Key Macro, Home Theatre and Device Label have either been reset to

default or cleared. To only clear Learning and Key Magic use the feature “Delete

Learning and Key Magic” as described on page 27.

INITIAL

SETUP

ADVANCED

SETUP

FUNCTION

RESET

USER

RESET

ENTER

Depending on the functions of your original remote control, the URC-7781 may operate

following functions of your television and sleep for devices that have this function on

the original remote.

Colour (+) = Press and release MAGIC then hold Volume (+)

Colour (-) = Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+)

Brightness (-) = Press and release MAGIC then hold Channel (-)

Sleep ON/OFF = Press MAGIC then POWER repeatedly until the sleeptimer reaches the

desired amount of minutes (or disappears from your device screen).

Note: depending on your original remote you may operate this function in a different

way.

Colour, Brightness and Sleep

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 14

NEW LABEL

RCV TV

WW W.ONEFORALL.COM

15

Extra Features

Changing the Device label

It is possible to change the label of the devices you have setup using a maximum of 4

characters (or digits) for each label.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ARROW Right...

will appear on the screen.

3 Press ENTER...

will appear on the screen.

4 Press ‘ARROW Left’ twice...

will appear on the screen.

5 Press ENTER...

will appear on the screen.

6 Press ENTER.

Select the corresponding

device mode of which you

want to change the label

using ARROW left / right and

confirm pressing ENTER.

7 You will see…

The first character of

the selected device label will

start to blink. Use the ARROW

LEFT/RIGHT keys to change the label to a max. of 4 characters

and press ENTER to store each selected character. After entering

the fourth character the display will return to ”CHANGE DEVICE

LABEL”.

5 You will see...

Press ENTER.

6 Select the corresponding device

label you wish to reset by using

ARROW left / right and press

ENTER. You will see the selected

device label change back to the

default label. The LED underneath the POWER key will light up

twice and the display will return to “RESET DEVICE LABEL”.

5 You will see…

To reset ALL DEVICE LABELS...

6 Press ENTER. The LED underneath the POWER key will light up

twice. All device labels will now be reset to the original label

and the display will return to ”DEVICE LABEL”.

INITIAL

SETUP

ADVANCED

SETUP

FUNCTION

DEVICE LABEL

CHANGE

DEVICE LABEL

RESET DEVICE

LABEL

RESET ALL

DEVICE LABELS

SELECT MODE

RCV TV

SELECT MODE

RCV TV

_ e.g. TV 1 (blank space between two characters/digits)

< To return to the previous character and reset the previous character to A.

^ To store a label of less than 4 characters e.g. when you want

to label the device as “T”.

. (dot) e.g. TV.1

It is also possible to choose one of the symbols:

ENTER

x2

ENTER

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 15

RCV TV VCR

UL

REMOVE VOL LOCK

RCV TV VCR

16 WWW. ONEFORALL.COM

Extra Features

Set Volume Lock

Example: It is possible to lock the volume to be from one particular mode e.g. TV.

Doing this will result in the fact that independent in what mode you are the volume +/-

and Mute keys will always send the volume from the TV mode.

1 Press and hold down MAGIC for about

3 sec. and...

will appear on the screen.

2 Press ENTER...

will appear on the screen.

3 Press ”ARROW Right” twice...

will appear on the screen.

4 Press ENTER twice...

will appear on the screen.

Use the ARROW left/right keys to select

the device (e.g. TV) you want

to lock the volume to.

5 Press ENTER to select the displayed device as the SRC (source).

The LED underneath the POWER key will light up twice and the

display will return to „VOLUME LOCK“.

Result: In the example above the TV mode will be the volume SRC (Source) for all other

installed devices. In any device mode pressing volume +/- or mute this will give

the volume functions of the TV mode.

Remove Device from Volume Lock

Example: If you want you can remove 1 device from the Volume Lock, so that it will

not send the volume of the SRC any longer but its own volume.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ENTER...

will appear on the screen.

3 Press ”ARROW Right” twice...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Press ARROW Right...

will appear on the screen.

6 Press ENTER...

will appear on the screen.

Use the ARROW left / right keys to select

the device (e.g. TV) you want to remove

from the volume lock.

7 Press ENTER to remove the displayed device from the volume lock.

The LED underneath the POWER key will light up 4 times.

The display will return to „VOLUME LOCK“.

Result: the device you selected will now send its own volume +/-, mute (instead

of the volume from the SRC device).

INITIAL

SETUP

INITIAL

SETUP

DEVICE

VOLUME LOCK

SET VOLUME LOCK

REMOVE DEVICE

FROM VOLUME LOCK

DEVICE

VOLUME LOCK

Volume Lock

L: Lock,

UL: Unlock, SRC: Source

ENTER

x2

ENTER

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 16

ADD TO VOL LOCK

RCV TV VCR

WW W.ONEFORALL.COM

17

INITIAL

SETUP

DEVICE

VOLUME LOCK

SET VOLUME LOCK

ADD DEVICE

TO VOLUME LOCK

Extra Features

Add Device To Volume Lock

Example: It is possible to add a device to the installed volume lock (SRC). You may want

to do this for devices you added after installing the volume lock, or if you removed a

device from the volume lock.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ENTER...

will appear on the screen.

3 Press ”ARROW Right” twice...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Press ”ARROW Right” twice...

will appear on the screen.

6 Press ENTER...

will appear on the screen.

Select the device (e.g. TV) you want to add to the volume lock using

the ARROW Left / Right keys.

7 Press ENTER to add the displayed device to the volume lock. The

LED underneath the POWER key will light up twice and the display

will return to VOLUME LOCK.

Result: The selected device will now send the volume +/-, mute of the SRC device.

Reset All Volume Controls

Example: You can reset all volume controls back to their original setting, so that all

devices will send their own volume again.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ENTER...

will appear on the screen.

3 Press ”ARROW Right” twice...

will appear on the screen.

4 Press ENTER...

will appear on the screen.

5 Press ARROW Left...

will appear on the screen.

6 Press ENTER to reset all volume controls.

The LED underneath the POWER key will

light up four times and the display will

return to VOLUME LOCK.

Result: All devices will now send their own volume +/-, mute again.

INITIAL

SETUP

DEVICE

VOLUME LOCK

SET VOLUME LOCK

RESET ALL

VOLUME CONTROLS

ENTER

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 17

PROG SEQ & ENTER

TV VCR RCV

DAILY

TIMED MACRO

WEEKLY

TIMED MACRO

SEL MACRO DAY

TUE WED THU

18 WWW. ONEFORALL.COM

SEL MACRO TIME

20:45

INITIAL

SETUP

ADVANCED

SETUP

FUNCTION

MACRO

ADD

TIMED MACRO

ONCE

TIMED MACRO

Extra Features

Add Timed Macro

The Macro feature allows you to define a sequence of commands that have to be

executed at a certain time.

You can program 3 types of timed macros:

- once timed macro

- daily timed macro

- weekly timed macro

Example: To RECORD a football match using the URC-7781 with your video recorder.

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ARROW Right...

will appear on the screen.

3 Press ENTER...

will appear on the screen.

4 Press ARROW Right...

will appear on the screen.

5 Press ENTER twice...

will appear on the screen.

6 Press ENTER...

will appear on the screen.

It is also possible to set the macro

to DAILY or WEEKLY. Use the ARROW keys to do so.

7 Press ENTER...

will appear on the screen.

Select the corresponding day when

you want to execute the Macro using the ARROW keys.

8 Press ENTER...

will appear on the screen.

Set the corresponding time when you want the macro

to execute (to start the RECORDING) using the number keys.

9 Press ENTER...

will appear on the screen.

You now have to record key

strokes in the device modes as you would

do when recording from the Video Recorder manually.

Select the corresponding device key (using the ARROW keys).

In our example scroll to VCR mode.

10 Press the corresponding key(s) you want to be sent in the timed

macro (in our exemple, press RECORD twice).

11 Press ENTER to save the macro...

will appear on the screen.

Result: you have programmed a macro to start recording today Wednesday at 20:45.

Now you need to program another macro to stop the recording on Wednesday at e.g.

22:35 so the signal that the URC-7781 will send to your video recorder at 22:35 will be

STOP.

Note: Make sure to place the URC-7781 pointed towards the video recorder

and make sure that there is a clean line of sight.

It is also possible to set the macro daily…

(the step SEL MACRO DAY will be skipped)

It is also possible to set the macro weekly…

Macros (Sequence of commands)

ADD

TIMED MACRO

ENTER

x2

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 18

WW W.ONEFORALL.COM 19

INITIAL

SETUP

ADVANCED

SETUP

FUNCTION

MACRO

ADD

MACRO

DELETE

MACRO

DEL TIMED MACRO

O WED 20:45

DELETE

TIMED MACRO

DELETE

TIMED MACRO

DEL TIMED MACRO

O WED 22:35

DELETE

TIMED MACRO

Example: To delete the Timed Macro from page 18:

1 Press and hold down MAGIC

for about 3 sec. and...

will appear on the screen.

2 Press ARROW Right...

will appear on the screen.

3 Press ENTER...

will appear on the screen.

4 Press ARROW Right...

will appear on the screen.

5 Press ENTER...

will appear on the screen.

6 Press ARROW Right...

will appear on the screen.

7 Press ENTER...

will appear on the screen.

8 Press ENTER...

You will now see the Timed Macros

you programmed displayed on the

screen. Next to O, D, or W you will see

the macro day (in case of a once or

weekly timed macro) displayed.

Next to it the macro time will be displayed on the screen.

You may use the ARROW LEFT / RIGHT keys to scroll through

the programmed Timed Macros.

O : Once Timed Macro

D : Daily Timed Macro

W : Weekly Timed Macro

9 Press ENTER to delete the displayed

timed macro. The LED underneath

the POWER key will light up twice

and…will appear on the screen.

10 If you want to delete another Timed

Macro press ENTER...

will appear on the screen.

11 Press ENTER to delete this timed macro.

The LED underneath the POWER key

will light up twice and…will appear

on the screen.

Result: the Timed Macros programmed from page 18 have been deleted.

Notes:

- The amount of keystrokes in a timed macro and the number of timed macros is

limited by the available memory space.

- A ”ONCE TIMED MACRO” will only be executed once. After executing this macro it

will automatically be erased from the remote’s memory.

- A ”DAILY TIMED MACRO” will be executed every day at the same time until its

removed from the remote’s memory.

- A ”WEEKLY TIMED MACRO” will be executed every week on the same day and same

time until the macro is removed from the remote’s memory.

- To indicate that a Timed Macro has been programmed, the display will show a * at

the left from the time in user mode.

- If you include the record function in the timed macro, you have to press

the record key twice.

Delete Timed Macro

ENTER

Extra Features

Macros (Sequence of commands)

706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 19

Strona się ładuje...

One For All URC-7781 Instrukcja obsługi

One For All URC-7781 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty