Poniżej znajdziesz krótkie informacje na temat Ramię do przeróbek RWS-B. Produkt ten idealnie nadaje się do pracy ze stacjami gorącego powietrza firmy JBC oraz podgrzewaczem, zwłaszcza PHS-KB. Ramię umożliwia regulację wysokości i położenia za pomocą osi pionowej i przegubowego ramienia. Posiada również uchwyt narzędziowy z precyzyjną regulacją. Ramię jest bezpieczne dla ESD i zgodne z normami CE.
Poniżej znajdziesz krótkie informacje na temat Ramię do przeróbek RWS-B. Produkt ten idealnie nadaje się do pracy ze stacjami gorącego powietrza firmy JBC oraz podgrzewaczem, zwłaszcza PHS-KB. Ramię umożliwia regulację wysokości i położenia za pomocą osi pionowej i przegubowego ramienia. Posiada również uchwyt narzędziowy z precyzyjną regulacją. Ramię jest bezpieczne dla ESD i zgodne z normami CE.
Packing List
The following items should be included:
Tool Arm ...................................................... 1 unit
Adapters ...................................................... 1 unit
Ref. 0017058 (for JT-TA Heater)
0017059 (for TE-TB Precision Heater)
Base .............................................................. 1 unit
Screw ........................................................... 1 unit
Ref. 0017057
Allen key ...................................................... 1 unit
Ref. 0013609
Manual ......................................................... 1 unit
Ref. 0020498
Ref. RWS-B
PHS Rework Adjustable Arm
2
www.jbctools.com
IR Preheater Support
Ref. PHS-SA
to Hot Air
stations
ESD safe
connector
Ideal for working with JBC’s Hot Air stations and a Preheater, especially the PHS-KB.
Features
Hose ClampTool Holder
Turn the lever to lower the tool
Vertical axis with ruler
When you have finished
raise the tool to free up the
workspace.
Adjust the tool head holder
position according to your
work needs
www.jbctools.com
3
Height Adjustment
The RWS-B Arm allows adjustment for
different heights according to your work needs
through the vertical axis rule.
Slide the tool holder to the appropriate height
and secure by tightening the lower knob to
guarantee stability. Make sure the upper knob is
loosened before sliding the tool holder.
Lower knob
Upper knob
Work Position Adjustment
The RWS-B arm allows adjustment for different positions according to your work needs.
The articulated arm covers all work areas.
Position the arm and tighten the knobs.
Top view
www.jbctools.com
5
Tool Holder adjustment
The Tool Holder for Rework Arm allows you to
adjust the tool head holder position to suit
your work needs.
Press the button or loosen the wheel to move
the Tool Holder.
Both axes have a ruler to carry out the task
with higher precision .
Tilting movement:
By holding down the button you can rotate the
Tool Holder up or down.
The movement allows a rotation of -40º to +40º.
You can lock or unlock the lateral rotation
mechanism by turning the fixing wheel a quarter.
The movement allows a rotation of -90º a +90º.
Rotation movement:
Button Tool head
holder
Wheel
6
Maintenance
- Check periodically that the RWS-B is clean,
especially the sliding parts and the shaft.
- Use a damp cloth when cleaning. Alcohol
can only be used to clean the metal parts.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service
Keep the sliding
parts clean
It is imperative to follow safety guidelines to prevent electric shock, injury,
fire or explosions.
Safety
- Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause fire.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lacking experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
0020498-1018
Specifications
- Total weight: 5 kg (11. lb)
- Base dimensions: 270 x 400 mm (10.6 x 15.8 in)
- Height: 386,5 mm (15.2 in)
- Arm lenght: 444,5 mm (17.5 in)
- ESD safe connector
Complies with CE standards
ESD Safe
www.jbctools.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Poniżej znajdziesz krótkie informacje na temat Ramię do przeróbek RWS-B. Produkt ten idealnie nadaje się do pracy ze stacjami gorącego powietrza firmy JBC oraz podgrzewaczem, zwłaszcza PHS-KB. Ramię umożliwia regulację wysokości i położenia za pomocą osi pionowej i przegubowego ramienia. Posiada również uchwyt narzędziowy z precyzyjną regulacją. Ramię jest bezpieczne dla ESD i zgodne z normami CE.
w innych językach
- English: jbc RWS-B User manual
Powiązane artykuły
-
jbc RWB Instrukcja obsługi
-
jbc CD-2BHE Instrukcja obsługi
-
-
-
-
jbc RHB Instrukcja obsługi
-
-
-
-
jbc CDA Instrukcja obsługi