jbc FAE070 Instrukcja obsługi

Typ
Instrukcja obsługi
FAE070
Flexible Arm + Clamp Ø 50 mm
INSTRUCTION MANUAL
Packing List
The following items are included:
Flexible Arm ................................................ 1 unit
Ref. FAE070
Manual ........................................................... 1 unit
Ref. 0019184
Clamp ........................................................ 2 units
Ref. 0018940
Screws* ....................................................... 2 units
Ref. 0018681
Washers* .................................................... 2 units
Ref. 0018877
2
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
Assembly
Lenght: 1 m
(39.37 in)
Connect the Flexible Hose to Flexible Arm
Clamp to fix flexible arm in place
Fume Extractor
Ref. FAE2-5A
Flexible
Hose Ø50
Ref. FAE010
Lenght: 1,5 m
(59.06 in)
* You can also fix the
flexible arm on your
workbench with the
supplied screws
www.jbctools.com
3
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
- When the flexible arm loses
firmness, it must be
re-compressed.
- For a greater compression,
turn it slightly clockwise.
- Once the arm is compressed,
adapt its position again.
You can replace the supplied nozzle and choose the one that best suits your needs.
Rectangular Nozzle for FAE Fume Extractor
Ref. FAE080
Round Nozzle for FAE Fume Extractor
Ref. FAE081
Arm assembly
Nozzles
4
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
Turn the nozzle and pull out to
remove it.
A bayonet fitting system
allows a proper connection
between the flexible arm and
the nozzle.
The nozzles are designed to
work with the arm suspended
and also supported on the
work bench.
Nozzle Replacement
Installation Guide Line
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
Follow these installation guidelines for proper use.
Do not install the flexible arm on shelves or
higher levels than the work bench. Forced
bending radii can cause arm breakage.
In case of a breakage, the windings
can be plugged back into each other. To
do this, align the windings with one another
and push them back together with strength.
The recommended working area of the arm
is 70 cm / 27.6 inches from the center of
its base. Extending the arm more than this
dimension could break it.
work bench
www.jbctools.com
5
Notes
6
Notes
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Specifications
0019184-020 523
FAE070
Flexible Arm + Clamp Ø 50 mm
Ref. FAE070
- Net Weight: 2,2 kg (4.9 lb)
- Length: 1 m (39.4 in)
- Inner Diameter: 50 mm (2 in)
- Total Package Dimensions / Weight: 1050 x 170 x 120 mm / 2.844 kg
(L x W x H) 41.34 x 6.7 x 4.72 in / 6.2 lb
Complies with CE standards.
ESD Safe.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

jbc FAE070 Instrukcja obsługi

Typ
Instrukcja obsługi

w innych językach