ø0,7
1,5mm
5mm
www.jbctools.com
3
2. Inserting
3. Rotational and Vertical Cartridge alignment
Changing cartridges
1. Removing
Insert the cartridges as far as the mark
for a proper connection. Before inserting,
make sure the cartridges are clean to
ensure the proper functioning of the tool.
Mark
The AM120-A Adjustable Micro Tweezers works with C120 cartridge range.
Find the model that best suits your soldering needs in www.jbctools.com
C120-004 C120-001C120-005 C120-009 C120-010
Compatible cartridges
Slightly turn the wheels to align the cartridges
as required.
Once the alignment has been made, do not forget to fix the cartridges by tightening the fixing
knobs. A single turn of the knob is required to get them fixed.
Also make sure that the cartridges are in good condition so that the tweezers work properly.
!
The tail wheel guarantees that the cartridges
are equally aligned with vertical symmetry.
Unlock the fixing knob and remove the
cartridges. You can use either a flat pliers
(Ref. PLR-195) or the cartridge extractor of
the stand (Ref. AM-SA).