Panasonic SCDM502E Instrukcja obsługi

Kategoria
Domowe zestawy audio
Typ
Instrukcja obsługi
POLSKI ENGLISHČESKY
TQBJ2215
E
2020/02/29
Operating Instructions
Instrukcja obsługi
Návod k obsluze
Compact Stereo System
Kompaktowy zestaw stereo
Kompaktní stereo systém
Model No. SC-DM502
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Dziękujemy za zakupienie tego produktu.
Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie przeczytać niniejsze
zalecenia i zachować instrukcję obsługi do wglądu.
Děkujeme, že jste si zakoupil tento výrobek.
Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte pro pozdější
použití.
SC-DM502E-TQBJ2215_eng_pol_cze.book 1 ページ 2020年1月11日 土曜日 午前9時32分
2
TQBJ2215
Table of contents
Accessories....................................................... 2
Safety precautions............................................ 3
Caution for AC Mains Lead.............................. 3
License .............................................................. 4
Control reference guide ................................... 5
Connections...................................................... 6
Using the remote control ................................. 6
DEMO play......................................................... 6
Inserting media .................................................7
About Bluetooth
®
.............................................. 7
Bluetooth
®
operations...................................... 8
Media playback controls .................................. 9
Listening to DAB/DAB+.................................. 10
Listening to FM radio ..................................... 12
Listening to music on an external equipment
..... 13
Sound adjustment .......................................... 14
Clock and Timer.............................................. 14
Others .............................................................. 15
Playable media................................................ 16
Unit and media care........................................ 16
Troubleshooting.............................................. 17
Specifications ................................................. 19
Accessories
Check the supplied accessories before using this unit.
About descriptions in these operating
instructions
Pages to be referred to are indicated as “l ±±”.
Unless otherwise indicated, operations are described using
the remote control. You can also use the controls on this
unit if they are the same.
1 Remote control
(N2QAYB001215)
1 Battery for remote control
2 AC mains leads
[For_the_United_Kingdom_and_Ireland]
(K2CT2YY00146)
[For_Continental_Europe]
(K2CQ2YY00164)
1 DAB indoor antenna
(N1CYYYY00022)
Please use the supplied AC mains lead suitable for the
household mains socket.
Do not use AC mains lead with other equipment.
Product numbers provided in these operating instructions are
correct as of December 2019. These may be subject to
change.
SC-DM502E-TQBJ2215_eng_pol_cze.book 2 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
3
Safety precautions
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or
splashing.
Do not place objects filled with liquids, such as vases, on
this unit.
Use the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the
plug.
Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from
the socket outlet immediately.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted
candles, on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
This unit is intended for use in moderate climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Avoid the use in the following conditions
High or low extreme temperatures during use, storage or
transportation.
Replacement of a battery with an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an
explosion.
Extremely high temperature and/or extremely low air
pressure that can result in an explosion or the leakage of
flammable liquid or gas.
Battery
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
Remove the battery if you do not intend to use the remote
control for a long period of time. Store in a cool, dark
place.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
WARNING
CAUTION
Figure A Figure B
Fuse cover
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
SC-DM502E-TQBJ2215_eng_pol_cze.book 3 ページ 2020年1月11日 土曜日 午前9時32分
4
TQBJ2215
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Customers can download a copy of the original DoC to our RE
products from our DoC server:
http://www.ptc.panasonic.eu
Contact to Authorized Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
NORSK
Produkt
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Utsett ikke produktet for regn, fukt, drypping eller sprut.
Ikke plasser objekter som er fylt med væske, som vaser,
på apparatet.
Bruk det anbefalte tilbehøret.
Fjern ikke deksler.
Reparer ikke denne enheten selv, overlat service til
kvalifisert servicepersonell.
Vekselstrømnett
Nettstøpselet er trukket ut fra denne enheten.
Installer denne enheten slik at nettstøpselet umiddelbart kan
trekkes fra stikkontakten.
Produkt
Dette produktet anvender en laser. Betjening av kontroller
eller justering eller andre inngrep enn de beskrevet i denne
bruksanvisning kan føre til farlig bestråling.
Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
Dette apparatet er beregnet for bruk under moderate
klimaforhold.
Plassering
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Ikke plasser apparatet i en bokhylle, et innebygget kabinett
eller et annet lukket sted. Pass på at produktet er godt
ventilert.
Apparatets ventilasjonsåpninger må ikke dekkes til med
aviser, duker, gardiner eller lignende.
License
The symbols on this product (including the
accessories) represent the following:
AC
Class II equipment (The construction of the
product is double-insulated.)
IOn
Í Standby
Type of wireless Operating Frequency
Maximum power
(dBm EIRP)
Bluetooth
®
2402-2480 MHz 10 dBm
Safety information for customers in
Norway
ADVARSEL
FORSIKTIG
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical
and electronic products and batteries
must not be mixed with general
household waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to
applicable collection points in
accordance with your national
legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential
negative effects on human health and the
environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
Note for the battery symbol
(bottom symbol):
This symbol might be used in
combination with a chemical symbol.
In this case it complies with the
requirement set by the Directive for
the chemical involved.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. Other trademarks and
trade names are those of their respective owners.
SC-DM502E-TQBJ2215_eng_pol_cze.book 4 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
5
Control reference guide
1 Standby/on switch [Í/I], [Í]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
3 Display
4 Adjust the volume (0 (min) to 50 (max))
5 Select the audio source
On this unit:
Press and hold to enter pairing mode (l 8) or
disconnect a Bluetooth
®
device (l 8).
On the remote control:
[ ]: “BLUETOOTH”
[O, N SELECT]:
6 USB port (l 7)
7 Direct preset buttons for storing or selecting radio
station ([1] to [5]) (l 10, 12)
8 Disc tray
Do not put any object in front of the disc tray.
9 Basic playback control buttons
10 Open or close the disc tray
11 Enter DEMO play mode (l 6)
12 Speakers
These speakers do not have magnetic shielding. Do not
place them near a TV, personal computer or other
magnetic devices.
13 Dim the display panel
Press again to cancel.
14 Enter setup menu
15 Change the displayed information
16 Selection/OK
17 Set the sleep timer
18 Mute the sound
Press again to cancel. “MUTE” is also cancelled when the
volume is adjusted or the unit is turned off.
19 Set the play menu item
20 Enter sound menu
13
1
5
9
14
15
16
17
4
18
19
20
12 3 4
678 910115
12
“CD” -------------. “DAB+” -------------. “FM” -------------. “D-IN”
:;
“BLUETOOTH” (--------------- “USB” (---------------- “AUX”
“CD” (----------. “DAB+” (----------. “FM” (----------. “D-IN
fe
vu
“BLUETOOTH” (--------------. “USB” (--------------. “AUX”
SC-DM502E-TQBJ2215_eng_pol_cze.book 5 ページ 2020年1月11日 土曜日 午前9時32分
6
TQBJ2215
Connections
1 Connect the antenna.
This unit can receive DAB/DAB+ and FM stations
with the DAB antenna.
Rotate the antenna at A to improve reception.
2 Connect the AC mains lead after all other
connections are completed.
This unit consumes a small amount of AC power
(l 19) even when turned off.
In the interest of energy conservation, if you will not be
using this unit for an extended period of time, unplug it
from the mains socket.
Some settings will be lost after you disconnect the
system. You have to set them again.
Tape the antenna to a wall or column in a position with the
least amount of interference.
If radio reception is poor, use an outdoor antenna (not
supplied).
Using the remote control
Insert the battery so the terminals (i and j) match
those in the remote control.
Point it at the remote control signal sensor on this unit.
To avoid interference, please do not put any objects in front
of signal sensor.
DEMO play
This unit is built-in with a sound demonstration music.
To play the demonstration music
1 Turn the unit on.
2 Press and hold [1/;, −DEMO] on this unit for at
least 2 seconds until “WAIT FOR DEMO PLAY”
appears on the display.
The demonstration music will be played for
approximately 1 minute. (“DEMO PLAY” is displayed
during DEMO play.)
After playback completes, this unit will automatically
exit the DEMO play mode.
To exit during DEMO play, press [].
12
Be sure to tighten the nut fully.
DAB indoor antenna (supplied)
Adhesive tape
(not supplied)
To a mains socket
AC mains lead (supplied)
(Alkaline or manganese
battery)
SC-DM502E-TQBJ2215_eng_pol_cze.book 6 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
7
Inserting media
1 Press [<] on this unit to open the disc tray.
2 Put in a disc with the label facing up.
3 Press [<] again to close the disc tray.
Insert the USB device directly. Do not use any USB
extension cable.
If you find difficulty in accessing this unit’s
[SELECT, s PAIRING] when a USB device is connected,
use the remote control. Or, remove the USB device as
necessary.
Please disconnect the USB device if you finish using.
When moving this unit, be sure to remove all media and turn
this unit to standby mode.
About Bluetooth
®
Frequency band used
This system uses the 2.4 GHz frequency band.
Certification of this device
This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
The actions below are punishable by law in some
countries:
Taking apart or modifying the system.
Removing specification indications.
Restrictions of use
Wireless transmission and/or usage with all
Bluetooth
®
equipped devices is not guaranteed.
All devices must conform to standards set by
Bluetooth SIG, Inc.
Depending on the specifications and settings of a
device, it can fail to connect or some operations can
be different.
This system supports Bluetooth
®
security features.
But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
This system cannot transmit data to a Bluetooth
®
device.
Range of use
Use this device at a maximum range of 10 m. The
range can decrease depending on the environment,
obstacles or interference.
Interference from other devices
This system may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this system is located too
close to other Bluetooth
®
devices or the devices that
use the 2.4 GHz band.
This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.
Intended usage
This system is for normal, general use only.
Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).
Inserting a disc
Connecting a USB device
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
SC-DM502E-TQBJ2215_eng_pol_cze.book 7 ページ 2020年1月11日 土曜日 午前9時32分
8
TQBJ2215
Bluetooth
®
operations
You can listen to the sound from the Bluetooth
®
audio
device from this unit wirelessly.
Refer to the operating instructions of the Bluetooth
®
device for details.
Preparation
Turn on the Bluetooth
®
feature of the device and
place the device near this unit.
Pairing with Bluetooth
®
devices
1 Press [ ] to select “BLUETOOTH”.
If “PAIRING” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “PAIRING” and then
press [OK].
Alternatively, press and hold [SELECT, s PAIRING]
on the unit.
3 Select “SC-DM502” from the Bluetooth
®
device’s
Bluetooth
®
menu.
The MAC address (alpha-numerical string that is unique
to each set) may be displayed before “SC-DM502” is
displayed.
The name of the connected device is indicated on the
display for a few seconds.
4 Start playback on the Bluetooth
®
device.
Connecting a paired Bluetooth
®
device
1 Press [ ] to select “BLUETOOTH”.
“READY” is indicated on the display.
2 Select “SC-DM502” from the Bluetooth
®
device’s
Bluetooth
®
menu.
The name of the connected device is indicated on the
display for a few seconds.
3 Start playback on the Bluetooth
®
device.
If prompted for the passkey, input “0000”.
You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used the longest will
be replaced.
This unit can only be connected to one device at a time.
When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
Press [ ] to select “BLUETOOTH”.
If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2 Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Select “MODE 1” if the sound is interrupted.
When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
select “MODE 1”.
The factory default is “MODE 2”.
If the sound input level from the Bluetooth
®
device is
too low, change the input level setting.
Preparation
Connect a Bluetooth
®
device.
1 Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2 Press [3, 4] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
^----------------------------------------------------J
Select “LEVEL 0” if the sound is distorted.
The factory default is “LEVEL 0”.
1 While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2 Press [3, 4] to select “OK? YES” and then press
[OK].
You can also disconnect the Bluetooth
®
device by pressing
and holding [SELECT, s PAIRING] on the unit.
The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Connecting via Bluetooth
®
menu
Bluetooth
®
transmission mode
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
SC-DM502E-TQBJ2215_eng_pol_cze.book 8 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
9
Media playback controls
The following marks indicate the availability of the
feature.
Preparation
Turn the unit on.
Insert the media or connect the Bluetooth
®
compatible device. (l 7, 8)
1 Select the audio source.
For disc:
Press [O, N SELECT] repeatedly to select “CD”.
For USB device:
Press [O, N SELECT] repeatedly to select
“USB”.
For Bluetooth
®
device:
Press [ ] to select “BLUETOOTH”.
(When selecting using this unit, press
[SELECT, s PAIRING].)
2 Press [1/;] to start playback.
Basic controls
To display information
([CD], [USB], [BLUETOOTH])
You can display the track, artist, album name, file type,
bit rate, and other information. (The information varies
depending on the audio source.)
Press [DISPLAY] repeatedly.
e.g.
[USB] (MP3)
To use this unit’s remote control with a Bluetooth
®
device, the
Bluetooth
®
device must support AVRCP (Audio Video
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
Maximum number of displayable characters:
Approx. 32
This system supports ver. 1 and 2 ID3 tags.
Text data that is not supported will not be displayed or will be
shown differently.
Select the playback mode.
1 Press [PLAY MENU] repeatedly to select
“PLAYMODE” or “REPEAT”.
2 Press [3, 4] to select the setting and then press
[OK].
During random playback, you cannot skip to tracks which
have been played.
The mode is cancelled when you open the disc tray or
remove the USB device.
[CD]: CD audio in CD-DA format or a CD that
contains MP3 files (l 16)
[USB]: USB devices containing MP3 file (l 16)
[BLUETOOTH]: Connected Bluetooth
®
device (l 8)
Basic play ([CD], [USB], [BLUETOOTH])
Stop Press [].
[USB]: The position is memorised and
“RESUME” is displayed.
[USB]: Press [] twice to stop the
playback fully.
Pause Press [1/;].
Press again to continue playback.
Skip Press [:/6] or [5/9] to skip
track.
[CD] (MP3), [USB]
Press [3] or [4] to skip the album.
Search During play or pause, press and hold
[:/6] or [5/9].
“A”: MP3 album number.
“T”: MP3 track number.
(“ stands for a number.)
Playback modes ([CD], [USB])
PLAYMODE
OFF
PLAYMODE
Cancels the play mode setting.
1-TRACK Only plays the selected track.
“1”, “ ” is displayed.
(Skip to the desired track.)
1-ALBUM Only plays the selected album.
Press [3] or [4] to select the album.
“1”, “ ” is displayed.
RANDOM Plays the contents randomly.
“RND” is displayed.
1-ALBUM
RANDOM
Plays the tracks in the selected
album randomly.
Press [3] or [4] to select the album.
“1”, “ ”, “RND” is displayed.
REPEAT
ON REPEAT Turns on repeat mode.
`” is displayed.
OFF
REPEAT
Turns off repeat mode.
SC-DM502E-TQBJ2215_eng_pol_cze.book 9 ページ 2020年1月11日 土曜日 午前9時32分
10
TQBJ2215
Listening to DAB/DAB+
Preparation
Make sure that the DAB antenna is connected. (l 6)
Turn the unit on.
Press [O, N SELECT] repeatedly to select “DAB+”.
To listen to DAB/DAB+ broadcasts, the available
stations need to be memorised in this unit.
This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if you select “DAB+” for the first time.
“SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(l 11, “To verify or improve the signal reception quality”) and
then re-scan DAB/DAB+ stations.
To re-scan DAB/DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
1 Press [PLAY MENU] to select “AUTO SCAN” and
then press [OK].
2 While “START ?” is flashing,
Press [OK].
When updating the station memory with the auto scan,
preset stations will be erased. Preset them again (l below).
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “STATION” and then press
[OK].
3 Press [:/6] or [5/9] to select the
station.
You can preset up to 20 DAB/DAB+ channels.
Channel 1 to 5 will be set under [1] to [5] on this unit.
(l right, “Changing the stations stored under [1] to
[5]”)
1 While listening to a DAB/DAB+ broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].
You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
The station occupying a channel is erased if another station
is preset in that channel.
(On this unit)
You can change the stations stored under [1] to [5]
easily.
While listening to a DAB/DAB+ broadcast
Press and hold one of [1] to [5] until “P ” appears on
the display.
(“ ” stands for a number.)
When you change the stations stored under [1] to [5],
channel 1 to 5 are also changed to the same corresponding
stations.
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
3 Press [:/6] or [5/9] to select the
station.
You can select channel 1 to 5 by pressing one of [1] to [5] on
this unit.
To select by preset, make sure that stations have already
been preset manually.
To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(l left).
Some DAB/DAB+ stations provide a secondary service
as well as the primary service. If the station you are
listening to is providing secondary service, “ will be
displayed.
1 While “ ” is displayed
Press [PLAY MENU] repeatedly to select
“DAB SECONDARY”.
2 Press [3, 4] to select the secondary service and
press [OK].
The setting will go back to primary service when changes are
made (e.g. the station is changed).
Memorising stations
Listening to the memorised stations
Presetting DAB/DAB+ stations
Changing the stations stored under
[1] to [5]
Listening to preset DAB/DAB+
stations
Listening to the secondary service
SC-DM502E-TQBJ2215_eng_pol_cze.book 10 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
11
Press [DISPLAY] to change the display.
The information will scroll through the display.
Each time you press the button:
If the DAB/DAB+ broadcast includes time information,
this unit’s clock will be automatically updated.
1 Press [PLAY MENU] repeatedly to select “AUTO
CLOCK ADJ”.
2 Press [3, 4] to select “ON ADJUST” and then
press [OK].
Select “OFF ADJUST” to turn the automatic clock adjustment
function off.
To check the signal reception quality, at least 1
frequency block needs to be successfully memorised.
If “SCAN FAILED” is displayed after “DAB+” is
selected or after an auto scan, proceed to “Manually
tuning 1 frequency block” (l below)
If stations have already been memorised to this unit,
proceed to “Checking the DAB/DAB+ signal
reception quality” (l right)
Manually tuning 1 frequency block
Use this function to scan 1 frequency block after
adjusting the position of the DAB antenna.
Preparation
Note down a frequency block that can be received in
your region (e.g., 12B 225.648 MHz).
1 While “SCAN FAILED” is displayed
Adjust the position of the DAB antenna.
2 Press [PLAY MENU] repeatedly to select
“MANUAL SCAN”.
3 Press [3, 4] to select the frequency block that is
receivable in your region and then press [OK].
If broadcasting stations are memorised, proceed to “To
re-scan DAB/DAB+ stations” to memorise stations on other
frequency blocks. (l 10)
If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a
station is memorised. If the situation does not improve, try
using an outdoor DAB antenna or consult your dealer.
Checking the DAB/DAB+ signal
reception quality
1 While listening to the DAB/DAB+ broadcast:
Press [PLAY MENU] repeatedly to select “SIGNAL
QUALITY” and then press [OK].
The current frequency block is displayed and then the
reception quality is indicated.
2 If the signal reception quality is poor, move the
antenna to a position where the reception quality
improves.
3 To continue checking the quality of other frequency
blocks:
Press [3, 4] again and select the desired
frequency.
4 Press [OK] to exit.
If the antenna has been adjusted, perform auto scanning and
update the station memory. (l 10)
Display
Dynamic label: Information about the
broadcast
PTY display: Programme type
Ensemble label: The name of the ensemble
Frequency display: The frequency block and
frequency is displayed.
Time display: Current time
Automatic clock adjustment
To verify or improve the signal
reception quality
Reception quality
0 (poor) – 8 (excellent)
SC-DM502E-TQBJ2215_eng_pol_cze.book 11 ページ 2020年1月11日 土曜日 午前9時32分
12
TQBJ2215
Listening to FM radio
You can preset up to 30 FM channels.
Channel 1 to 5 will be set under [1] to [5] on this unit.
(l right, “Changing the stations stored under [1] to
[5]”)
Preparation
Make sure that the antenna is connected. (l 6)
Turn the unit on.
Press [O, N SELECT] repeatedly to select “FM”.
1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(“FM 87.50”).
CURRENT:
To begin auto preset with the current frequency.*
1
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to “Manual tuning”.
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
3 Press [:/6] or [5/9] to select the
channel.
You can select channel 1 to 5 by pressing one of [1] to [5] on
this unit.
Manual tuning
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “MANUAL” and then press
[OK].
3 Press [:/6] or [5/9] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
1 While listening to the radio broadcast
Press [OK].
2 Press [3, 4] to select the channel and then press
[OK].
Do steps 1 through 2 again to preset more stations.
A station previously stored is overwritten when another
station is stored in the same channel preset.
(On this unit)
You can change the stations stored under [1] to [5]
easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until “P ” appears on
the display.
(“ ” stands for a number.)
When you change the stations stored under [1] to [5],
channel 1 to 5 are also changed to the same corresponding
stations.
To display the current FM signal status
Press [DISPLAY] repeatedly to select “FM STATUS”.
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
To display Radio Data System text data
This system can show the text data transmitted by the
Radio Data System available in some areas.
Press [DISPLAY] repeatedly.
Radio Data System is available only when stereo works in
reception.
Radio Data System may not be available if reception is poor.
Presetting stations automatically
Listening to a preset channel
Presetting stations manually
Changing the stations stored under
[1] to [5]
“FM ST”: FM stereo broadcast is being received.
“FM - - - -”: No broadcast is received or FM
broadcast received is weak or in
monaural.
“FM MONO”: You have set the “FM MODE” to
“MONO”. (l 17, “If noise is excessive
during FM reception.”)
“PS”: Programme service
“PTY”: Programme type
“FREQ”: Frequency
SC-DM502E-TQBJ2215_eng_pol_cze.book 12 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
13
Listening to music on an
external equipment
You can connect a TV, DVD player, etc., to listen to the
music through this unit.
Switch off all equipment before connection and read the
appropriate operating instructions.
Disconnect the AC mains lead before connection. Do not
connect the AC mains lead until all other connections are
completed.
Do not bend cables at sharp angles.
Components and cables are sold separately.
Sound distortion can occur when you use an adaptor.
If you want to connect equipment other than those described,
refer to the audio dealer.
Using the optical input
1 Connect the external equipment.
2 Turn this unit on.
3 Press [O, N SELECT] repeatedly to select “D-IN”.
4 Play the external equipment.
This system supports linear PCM signal.
Multi-channel source will be converged to 2 channels.
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
The sound is muted if the signal format or frequency is not
supported.
Reduce the volume on the TV to its minimum, and then
adjust the volume of this unit.
Using the auxiliary input
1 Connect the external equipment.
2 Turn this unit on.
3 Press [O, N SELECT] repeatedly to select “AUX”.
4 Play the external equipment.
e.g. TV
(not supplied)
Optical digital audio cable
(not supplied)
L
R
AUDIO OUT
e.g.DVD player
(not supplied)
Audio cable
(not supplied)
SC-DM502E-TQBJ2215_eng_pol_cze.book 13 ページ 2020年1月11日 土曜日 午前9時32分
14
TQBJ2215
Sound adjustment
The following sound effects can be added to the audio
output.
1 Press [SOUND] repeatedly to select the effect.
2 Press [3, 4] to select the setting and then press
[OK].
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
When “PRESET EQ” is selected, Bass and Treble settings
will be changed to the settings in preset EQ setting.
You can save your desired sound settings to
“SOUND 1”, “SOUND 2” or “SOUND 3” as
“MY SOUND”.
1 Adjust your desired sound effects. (l above)
2 Press [SETUP] to select “SAVE MY SOUND”.
3 Press [3, 4] to select a setting number and then
press [OK].
“SAVED” is displayed.
The sound settings previously saved will be replaced
when you save new settings to the same setting
number.
Recalling the sound settings you have
saved
1 Press [SOUND] to select “MY SOUND”.
2 Press [3, 4] to select the desired sound setting
number and then press [OK].
Clock and Timer
This is a 24-hour clock.
1 Press [SETUP] to select “CLOCK”.
2 Press [3, 4] to set the time and then press [OK].
To check the time
Press [SETUP] to select “CLOCK” and then press
[OK].
(During standby, press [DISPLAY].)
The clock is reset when there is a power failure or when the
AC mains lead is removed.
Reset the clock regularly to maintain accuracy.
The sleep timer can turn the unit off after a set time.
Press [SLEEP] repeatedly to select the setting
(in minutes).
“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120
^---------------- “OFF” (Cancel) (""""""}
The remaining time is indicated on the unit’s display at every
minute except when other operations are performed.
“SLEEP 1” is always shown when only 1 minute remains.
The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
“MY SOUND”
(My sound)
“SOUND 1”, “SOUND 2”, or
“SOUND 3”.
(l below, “Saving the sound
settings”)
“PRESET EQ”
(Preset Equalizer)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal), “NEWS” (news),
“CINEMA” (cinema) or “FLAT”
(flat/off).
“BASS” (Bass) or
“TREBLE” (Treble)
Adjust the level (j4 to i4).
“SURROUND”
(Surround)
“ON SURROUND” or “OFF
SURROUND”.
“D.BASS”
(Dynamic Bass)
“ON D.BASS” or “OFF D.BASS”.
Saving the sound settings
Setting the clock
Sleep timer
SC-DM502E-TQBJ2215_eng_pol_cze.book 14 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
15
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1 Press [SETUP] repeatedly to select “TIMER ADJ”.
2 Press [3, 4] to set the starting time (“ON TIME”)
and then press [OK].
3 Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
4 Press [3, 4] to select the music source* and then
press [OK].
Turning the timer on
1 Prepare the selected music source and set the
desired volume.
2 Press [SETUP] repeatedly to select “TIMER SET”.
3 Press [3, 4] to select “SET” and then press [OK].
F” is displayed.
To turn the timer off, select “OFF”.
4 Press [Í] to turn the unit to standby mode.
To check the settings
Press [SETUP] repeatedly to select “TIMER ADJ” and
then press [OK].
(During standby, press [DISPLAY] twice.)
The timer starts at a low volume and increases gradually to
the preset level.
The timer comes on at the set time every day if the timer is
on.
If you turn off the unit and turn it on again while a timer is in
operation, the timer will not stop at the end time.
* “CD”, “USB”, “DAB+” and “FM” can be set as the music
source.
Others
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being
used for approximately 20 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select “AUTO OFF”.
2 Press [3, 4] to select “OFF” and then press [OK].
To turn the function on, select “ON” in step 2.
This setting cannot be selected when radio is the source.
When connected to a Bluetooth
®
device, the function does
not work.
When “SC-DM502” is selected from a paired
Bluetooth
®
device’s Bluetooth
®
menu, this unit will turn
on automatically from standby mode and establish a
Bluetooth
®
connection.
1 Press [SETUP] repeatedly to select “BLUETOOTH
STANDBY”.
2 Press [3, 4] to select “ON” and then press [OK].
To turn the function off, select “OFF” in step 2.
The factory default is “OFF”. If this function is set to “ON”, the
standby power consumption will increase.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1 Press [O, N SELECT] repeatedly to select “CD”.
2 Press and hold [] on the unit and [O SELECT] on
the remote control until the unit’s display shows
“REMOTE 2”.
3 Press and hold [OK] and [O SELECT] on the
remote control for at least 4 seconds.
To change the mode back to “REMOTE 1”, press
[O, N SELECT] to select “CD” and then repeat the steps 2
and 3 but replace [O SELECT] with [ ] on the remote
control.
Occasionally, Panasonic may release updated
software for this system that may add or improve the
way a feature operates. These updates are available
free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Press [SETUP] repeatedly to select “SW VER.” and
then press [OK].
The version of the installed software is displayed.
Press [OK] to exit.
Play timer
Auto off function
Bluetooth
®
standby
Changing the unit and remote
control code
Software update
Checking the software version
SC-DM502E-TQBJ2215_eng_pol_cze.book 15 ページ 2020年1月11日 土曜日 午前9時32分
16
TQBJ2215
Playable media
A disc with the CD Logo.
This unit can play back discs that conform to the CD-DA
format.
This system can play back CD-R/RW with CD-DA or MP3
format content.
The unit may not be able to play some discs due to the
condition of the recording.
Before playback, finalise the disc on the device it was
recorded on.
If the disc includes both MP3 and normal audio data
(CD-DA), the unit plays the type recorded in the inner part of
the disc.
This unit cannot play files recorded using packet write.
Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Some CD-R/RW cannot be played because of the condition
of the recording.
MP3 files are defined as tracks and folders are defined as
albums.
This system can access up to:
CD-DA: 99 tracks
MP3: 999 tracks, 255 albums (including root folder)
Recordings will not necessarily be played in the order you
recorded them.
This unit does not guarantee connection with all USB
devices.
FAT12, FAT16 and FAT32 file systems are supported.
This unit supports USB 2.0 Full Speed.
USB devices with storage capacity of more than 32 GB
cannot work in some conditions.
Supported format: Files with the extension “.mp3” or “.MP3”.
Depending on how you create the files, they may not play in
the order you numbered them or may not play at all.
Files are defined as tracks and folders are defined as
albums.
This system can access up to:
800 albums (including root folder)
8000 tracks
999 tracks in one album
Unit and media care
Pull out the AC mains lead from the outlet before
maintenance.
Clean this unit with a soft, dry cloth
When dirt is heavy, wring a wet cloth tightly to wipe the dirt,
and then wipe it with a dry cloth.
When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials that can fall apart.
Small pieces may get stuck inside the speaker cover.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, carefully read the
cloth’s instructions.
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc handling precautions
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or
labels (rented discs etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes.
To dispose or transfer this unit
The unit may keep the user settings information in the
unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory defaults to delete the user
settings. (l 17, “To return all settings to the factory
defaults”)
Compatible CD
Compatible USB devices
DO DO NOT
SC-DM502E-TQBJ2215_eng_pol_cze.book 16 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
17
Troubleshooting
Before requesting service, make the following checks.
If you are uncertain about some of the check points, or
if the solutions indicated in the following guide does not
resolve the issue, then consult your dealer for
instructions.
Cannot turn on the unit.
After connecting the AC mains lead, wait about 10 seconds before
turning on the unit.
Humming heard during playback.
If an AC mains lead or fluorescent lights are near the cords, then
keep other appliances and cords away from the cables.
The unit does not work.
One of the unit’s safety devices may have been activated.
1 Press [Í/I] on the unit to switch the unit to standby.
If the unit does not turn off, disconnect the AC mains lead
from the mains socket, reconnect it to the outlet after about
30 seconds. Then wait for about 10 seconds.
2 Press [Í/I] on the unit to switch it on. If the unit still cannot be
operated, consult the dealer.
The display panel lights up and changes
continuously in standby mode.
Press and hold [] on the unit until “SDEMO OFF” is displayed.
The remote control does not work properly.
The battery is depleted or inserted incorrectly. (l 6)
Keep mobile phones and smart devices away from this unit.
Incorrect display or play does not start.
Make sure that the disc is compatible with this unit. (l 16)
There is moisture on the lens. Wait for about an hour and then try
again.
No response when [1/;] is pressed.
Disconnect the USB device and then reconnect it. Alternatively,
turn the unit off and on again.
The USB drive or its contents cannot be read.
The USB drive format or its contents is/are not compatible with the
unit (l 16).
The USB host function of this product may not work with some
USB devices.
Slow operation of the USB flash drive.
Large file size or high memory USB flash drive takes longer time
to read.
The elapsed time displayed is different from the
actual play time.
Copy the data to another USB device or backup the data and
reformat the USB device.
DAB/DAB+ reception is poor.
Keep the antenna away from computers, televisions, other cables
and cords.
Use an outdoor antenna.
If noise is excessive during FM reception.
Change the audio to be output as monaural.
1 Press [PLAY MENU] repeatedly to select “FM MODE”.
2 Press [3, 4] to select “MONO” and then press [OK].
The sound becomes monaural.
To cancel, select “STEREO” or change the frequency.
In normal circumstances, select “STEREO”.
Static or noisy reception is heard while listening to
a radio broadcast.
Confirm the antenna is properly connected. (l 6)
Adjust the position of the antenna.
Try to keep a certain amount of distance between the antenna and
AC mains lead.
Try using an outdoor antenna if there are buildings or mountains
nearby.
Turn the TV or other audio players off or separate it from this unit.
Keep mobile phones away from this unit.
Pairing cannot be completed.
Check the Bluetooth
®
device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or the registration has
been replaced. Try re-pairing the device. (l 8)
This unit might be connected to a different device. Disconnect the
other device and try re-pairing the device. (l 8)
If “MODE 2” is selected in “LINK MODE”, select “MODE 1”. (l 8)
If the problem persists, turn the unit off and on, then try again.
The device is connected, but audio cannot be
heard through this unit.
For some built-in Bluetooth
®
devices, you have to set the audio
output to “SC-DM502” manually. Read the operating instructions
for the device for details.
To return all settings to the factory defaults
When the following situations occur, reset the
memory:
There is no response when buttons are pressed.
You want to clear and reset the settings.
1 Disconnect the AC mains lead. (Wait for at least
30 seconds before proceeding to step 2.)
2 While pressing and holding down [Í/I] on the
unit, reconnect the AC mains lead.
Keep holding down [Í/I] until “---------” appears on the
display.
3 Release [Í/I].
The settings are returned to the factory defaults. It is
necessary to set the settings again.
General
Remote control
Disc
USB
Radio
Bluetooth
®
SC-DM502E-TQBJ2215_eng_pol_cze.book 17 ページ 2020年1月11日 土曜日 午前9時32分
18
TQBJ2215
The sound is interrupted.
The device is out of the 10 m communication range. Place the
Bluetooth
®
device closer to this unit.
Remove any interference between this unit and the device.
Other devices that use the 2.4 GHz frequency band, such as
wireless routers, microwaves, cordless phones, etc. are
interfering. Place the Bluetooth
®
device closer to this unit and
distance it from the other devices.
Select “MODE 1” for stable communication. (l 8)
The following messages or service numbers may
appear on the unit’s display.
“--:--”
You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (l 14).
“ADJUST CLOCK”
Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
Play timer is not set. Adjust the play timer accordingly.
“AUDIO UNSUPPORTED”
The signal format or frequency is not supported.
This system does not support bitstream signals. Change the
digital audio output setting on the external equipment to PCM.
This system supports sampling frequencies of 32 kHz, 44.1 kHz,
48 kHz and 96 kHz. Select only the supported sampling
frequencies on the connected equipment.
Try connecting the external equipment by using the auxiliary input.
“AUTO OFF”
The unit has been left unused for about 20 minutes and will shut
down within a minute. Press any button to cancel it.
“ERROR”
Incorrect operation is performed. Read the instructions and try
again.
“F” / “F” (“ ” stands for a number.)
There is a problem with this unit.
Disconnect the AC mains lead from the mains socket, reconnect it
to the outlet after about 30 seconds. Wait for about 10 seconds,
then turn on the unit. If the problem still persists, disconnect the
AC mains lead and consult your dealer.
“LINKING”
This system is trying to connect to the last connected Bluetooth
®
device when “BLUETOOTH” is selected.
“NO DEVICE”
The USB device is not inserted correctly. Read the instructions
and try again (l 7).
“NO DISC”
Insert the disc to be played (l 7).
“NO PLAY”
Examine the content. You can only play supported format. (l 19)
The files in the USB device can be corrupted. Format the USB
device and try again.
The unit may have a problem. Turn the unit off and then on again.
“NO PRESET”
There are no preset DAB/DAB+ stations to select. Preset some
channels. (l 10)
“NO SIGNAL”
This station cannot be received. Check your antenna (l 6).
“NOT SUPPORTED”
You have connected an unsupported USB device.
“PLAYERROR”
You played an unsupported file. The system will skip that track
and play the next one.
“READING”
The unit is checking the “CD”/“USB” information. After this display
has disappeared, start operating.
“REMOTE ” (“ ” stands for a number.)
The remote control and this unit are using different codes. Change
the code on the remote control.
When “REMOTE 1” is displayed, press and hold [OK] and
[ ] on the remote control for at least 4 seconds.
When “REMOTE 2” is displayed, press and hold [OK] and
[O SELECT] on the remote control for at least 4 seconds.
“SCAN FAILED”
Stations are not receivable. Check your antenna and try Auto
scanning (l 10).
If “SCAN FAILED” is still displayed find the best signal reception
with the “MANUAL SCAN” tuning function. (l 11)
“SOUND NOT SET” (“ stands for a number.)
There is no saved setting under the selected sound setting
number. Save the sound settings. (l 14)
“USB OVER CURRENT ERROR”
The USB device is drawing too much power. Disconnect the USB
device, turn the unit off and then on again.
Check the connection, it may be caused by a faulty USB cable.
“VBR”
The system cannot show the remaining play time for variable bit
rate (VBR) tracks.
“WAIT”
This is displayed, for example, when this unit is turning off.
Messages
SC-DM502E-TQBJ2215_eng_pol_cze.book 18 ページ 2020年1月11日 土曜日 午前9時32分
ENGLISH
TQBJ2215
19
Specifications
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Total harmonic distortion is measured by a digital spectrum
analyzer.
*1: No device is connected to the USB port before turning to
standby mode.
*2: MPEG-1 Layer 3, MPEG-2 Layer 3
GENERAL
Power consumption 25 W
Power consumption in standby mode
(When “BLUETOOTH STANDBY” is “OFF”)
*1
Approx. 0.2 W
(When “BLUETOOTH STANDBY” is “ON”)
*1
Approx. 0.3 W
Power supply AC 220 V to 240 V, 50 Hz
Dimensions (WkHkD)
400 mmk127 mmk219 mm
Mass Approx. 3.9 kg
Operating temperature range 0 oC to r40 oC
Operating humidity range
35 % to 80 % RH (no condensation)
AMPLIFIER SECTION
Output power
RMS Output Power
Front Ch (both ch driven)
20 W per channel (8 ), 1 kHz, 10 % THD
Total RMS power 40 W
TUNER SECTION
Preset Memory FM 30 stations
Frequency Modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75 (unbalanced)
DAB SECTION
DAB memories 20 channels
Frequency Band (Wavelength)
Band III 5A to 13F
(174.928 MHz to 239.200 MHz)
Sensitivity *BER 4x10
-4
Min Requirement s98 dBm
DAB External Antenna
Terminal F - Connector (75 )
DISC SECTION
Disc played (8 cm or 12 cm)
CD, CD-R/RW (CD-DA, MP3
*2
)
Pick up
Wavelength 790 nm (CD)
NORSK (NORWAY)
Bølgelengde 790 nm (CD)
Laserstyrke Ingen farlig stråling sendes ut
SPEAKER SECTION
Speaker unit(s)
Full Range 8cmconetypek2
TERMINAL SECTION
USB Port
USB Port power DC OUT 5V1.5A
USB Standard USB 2.0 full speed
Media file format support MP3
*2
(¢.mp3)
Audio support format
MP3
*2
Sampling frequency 32/44.1/48 kHz
Audio word size 16 bits
Channel count 2ch
USB device file system FAT12, FAT16, FAT32
Digital audio input
Optical digital input Optical terminal
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Audio format PCM
Analog audio input
Audio input Pin jack
Bluetooth
®
SECTION
Version Bluetooth
®
Ver.4.2
Class Class 2
Supported Profiles A2DP, AVRCP
Frequency band 2.4 GHz band FH-SS
Operation Distance 10 m Line of sight
Supported Codec SBC
SC-DM502E-TQBJ2215_eng_pol_cze.book 19 ページ 2020年1月11日 土曜日 午前9時32分
20
TQBJ2215
Spis treści
Akcesoria......................................................... 20
Zasady bezpieczeństwa ................................. 21
Licencja ........................................................... 22
Instrukcja sterowania..................................... 23
Podłączenia.....................................................24
Korzystanie z pilota ........................................ 24
Odtwarzanie DEMO......................................... 24
Wkładanie nośników ...................................... 25
Informacje o Bluetooth
®
................................. 25
Operacje Bluetooth
®
....................................... 26
Przyciski odtwarzania z nośników ................ 27
Słuchanie DAB/DAB+ ..................................... 28
Słuchanie radia FM......................................... 30
Słuchanie muzyki na urządzeniach
zewnętrznych .................................................. 31
Regulacja dźwięku.......................................... 32
Zegar i timer .................................................... 32
Inne .................................................................. 33
Nośniki, które mogą być odtwarzane ........... 34
Konserwacja urządzenia i nników ............ 34
Usuwanie usterek ........................................... 35
Dane techniczne ............................................. 37
Akcesoria
Sprawdź dostarczone akcesoria przed rozpoczęciem
użytkowania urządzenia.
Informacje dotyczące opisów w niniejszej
instrukcji obsługi
Odniesienia do stron są oznaczone jako “l ±±”.
O ile nie wskazano inaczej, opisane czynności
wykonywane są za pomocą pilota, jednak można je
wykonać również na urządzeniu głównym, jeżeli elementy
sterujące są takie same.
1 Pilot zdalnego sterowania
(N2QAYB001215)
1 Bateria do pilota zdalnego sterowania
2 przewody zasilania
1 antena wewnętrzna DAB
Należy używać odpowiedniego dla gniazdka elektrycznego
przewodu zasilania, który znajduje się na wyposażeniu.
Nie używaj kabla zasilającego do zasilania innych
produktów.
Numery produktów podane w niniejszej instrukcji obsługi
według stanu na grudzień 2019. Mogą ulec zmianie.
SC-DM502E-TQBJ2215_eng_pol_cze.book 20 ページ 2020年1月11日 土曜日 午前9時32分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Panasonic SCDM502E Instrukcja obsługi

Kategoria
Domowe zestawy audio
Typ
Instrukcja obsługi

w innych językach