Panasonic SCPM602EG Instrukcja obsługi

Marka: Panasonic

Model: SCPM602EG

Kategoria: Smartwatche

Typ: Instrukcja obsługi

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Instrucciones de funcionamiento

CD Stereo System

Zestaw stereo z CD

Stereosystém s CD

Sistema estéreo con reproductor

de discos compactos

Model No. SC-PM602

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Dziękujemy za zakupienie tego produktu.

Proszę dokładnie zapoznać się z tą instrukcją obsługi, aby jak najlepiej wykorzystać to urządzenie i

zapewnić jego bezpieczne użytkowanie.

Prosimy o zachowanie niniejszej instrukcji obsługi.

Děkujeme za zakoupení tohoto výrobku.

Pro dosažení optimálního výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Uschovejte si prosím tento návod k obsluze.

Muchísimas gracias por haber adquirido este aparato.

Lea con atención estas instrucciones para obtener las máximas prestaciones y seguridad.

Guarde este manual para su consulta en el futuro.

TQBJ0979

TQBJ0979_en.pl.cz.es.book Page 1 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Your system and the illustrations can look differently.

These operating instructions are applicable to the

following system.

The symbols on this product (including the accessories)

represent the following:

Supplied accessories

Check and identify the supplied accessories.

 1 AC mains lead

 1 DAB antenna

 1 Remote control

(N2QAYB000984)

Table of contents

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . .2

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . .2

Making the connections. . . . . . . . . . . . . . . . . . . . . .3

Placement of speakers. . . . . . . . . . . . . . . . . . . . . . .3

Overview of controls. . . . . . . . . . . . . . . . . . . . . . . . .4

Preparing the remote control . . . . . . . . . . . . . . . . . .4

Preparing the media . . . . . . . . . . . . . . . . . . . . . . . . .5

Media playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Clock and timers. . . . . . . . . . . . . . . . . . . . . . . . . . .10

Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as

vases, on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this

unit is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as

lighted candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote

control for a long period of time. Keep in a cool, dark

area.

System SC-PM602

Main unit SA-PM602

Speakers SB-PM500

Class II equipment (The construction of the

product is double-insulated.)

Standby

TQBJ0979_en.pl.cz.es.book Page 2 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1 Connect the DAB antenna.

Be sure to tighten fully the nut.

Do not use any other DAB antenna except the

supplied one.

Use an outdoor antenna if the reception is poor.

2 Connect the speakers.

3 Connect the AC mains lead.

Do not use an AC mains lead from other equipment.

Conserving power

The system consumes a small amount of power

(Z“Specifications”) when it is in standby mode.

Disconnect the power supply if you do not use the

system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Placement of speakers

The left and right speakers are the same.

Use only the supplied speakers.

You can cause damage to the system and decrease the

sound quality if you use other speakers.

Note:

• Keep your speakers more than 10 mm from the main unit

for ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic shielding. Do not put

them near TVs, PCs or other equipment easily influenced

by magnetism.

• When you play at high levels for a long period, it can cause

damage to the speakers and decrease the life of the

speakers.

• Decrease the volume in these conditions to prevent

damage:

– When the sound is distorted.

– When you adjust the sound quality.

• To prevent damage to the speakers, do not touch the

speaker cones if you remove the nets.

Be careful not to cross

(short-circuit) or reverse

the polarity of the speaker

wires as doing so may

damage the speakers.

(6:)

Adhesive tape

(not supplied)

Red

Black

CAUTION!

• Use the speakers only with the recommended

system. If not, you can cause damage to the

amplifier and speakers and can cause a fire.

Consult an approved service personnel if damage

occurs or if there is a sudden apparent change in

performance.

• Do the procedures included in these instructions

when you attach the speakers.

To household

mains socket

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 3 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

A Standby/on switch [`], [1]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still

consuming a small amount of power.

B Select the audio source

On the main unit:

To start Bluetooth

pairing, press and hold

[ –PAIRING].

C Basic playback control

D View the setup menu

E View the content information

F Select or confirm the option

G Open or close the disc tray

H Decrease the brightness of the display panel

To cancel, press the button again.

I Adjust the volume level

J Mute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

K View the play menu

L Select the sound effects

M Display panel

N Remote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left and

right

O Headphone jack ( )

Plug type: Ø 3.5 mm stereo (not supplied)

– Excessive sound pressure from earphones and

headphones can cause hearing loss.

– Listening at full volume for long periods may

damage the user’s ears.

P USB port ( )

Q Disc tray

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

(not supplied)

TQBJ0979_en.pl.cz.es.book Page 4 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Preparing the media

Disc

1 Press [CD x] (main unit: [x OPEN/CLOSE]) to open

the disc tray.

Put in a disc with the label facing up.

Press again to close the disc tray.

2 Press [USB/CD] to select “CD”.

USB

1 Decrease the volume and connect the USB device

to the USB port.

Hold the main unit when connecting or disconnecting

the USB device.

2 Press [USB/CD] to select “USB”.

Note:

Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

Bluetooth

You can connect and play an audio device wirelessly

through Bluetooth

Preparation

• Switch on the Bluetooth

feature of the device and put

the device near the system.

• Read the operating instructions of the device for

details.

█ Pairing a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (Z“Disconnecting a device”).

1 Press [ ].

If “PAIRING” is shown, continue with step 3.

2 Press [PLAY MENU] to select “PAIRING” and then

press [OK].

Or press and hold [ –PAIRING] on the main unit

until “PAIRING” is shown.

3 Select “SC-PM602” from the Bluetooth

menu of

the device.

If prompted for a passkey, input “0000”.

The device connects with this system automatically

after pairing is complete.

The name of the connected device is shown for a few

seconds.

Note:

You can pair up to 8 devices with this system. If a 9th device

is paired, the device that has not been used for the longest

time will be replaced.

█ Connecting a device

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (Z“Disconnecting a device”).

1 Press [ ].

“BLUETOOTH READY” is shown.

2 Select “SC-PM602” from the Bluetooth

menu of

the device.

The name of the connected device is shown for a few

seconds.

3 Start playback on the device.

Note:

• A device must be paired to connect.

• This system can only connect to one device at a time.

• When

“BLUETOOTH” is selected as the source, this

system will automatically try to connect to the last

connected device. (

“LINKING” is shown during this

process.)

█ Disconnecting a device

1 Press [ ].

2 Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

3 Press [R, T] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the main unit

Press and hold [ –PAIRING] until “PAIRING” is

shown.

Note:

A device is disconnected when you:

• Select a different source.

• Move the device out of the maximum range.

• Disable the Bluetooth

transmission of the device.

• Switch off the system or the device.

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 5 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Media playback

The following marks indicate the availability of the

feature.

Basic playback

CD USB BLUETOOTH

Note:

Depending on the Bluetooth

device, some operations may

not work.

Viewing available information

CD USB BLUETOOTH

You can view the available information on the display

panel.

Press [DISPLAY].

Note:

• Maximum characters that can be shown: approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

• Text data that the system does not support can show

differently.

• Example: MP3 album and track number display.

Play menu

CD USB

1 Press [PLAY MENU] repeatedly to select

“PLAYMODE” or “REPEAT”.

2 Press [R, T] to select the setting and then press

[OK].

Note:

• During random playback, you cannot skip to tracks which

have been played.

• The setting is cancelled when you open the disc tray or

disconnect the USB device.

CD :

USB :

BLUETOOTH :

CD-R/RW in CD-DA format or with MP3 files.

USB device with MP3 files.

Bluetooth

device.

Play Press [4/9 ].

Stop Press [8].

USB

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5/6] to skip track.

CD USB

Press [R, T] to skip MP3 album.

Search Press and hold [2/3] or [5/6].

Album

number

Track

number

PLAYMODE

OFF

PLAYMODE

Cancel the setting.

1-TRACK

Play one selected track.

Press [2/3] or [5/6] to

select the track.

1-ALBUM

Play one selected MP3 album.

Press [R, T] to select the MP3 album.

RANDOM

RND

Play all tracks randomly.

1-ALBUM

RANDOM

1 RND

Play all tracks in one selected MP3

album randomly.

Press [R, T] to select the MP3 album.

REPEAT

OFF REPEAT Cancel the setting.

ON REPEAT Repeat playback.

TQBJ0979_en.pl.cz.es.book Page 6 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Link mode

BLUETOOTH

You can change the link mode to suit the connection

type.

Preparation

If this system is connected to a Bluetooth

device,

disconnect it (Z“Disconnecting a device”).

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [R, T] to select the mode and then press

[OK].

Note:

• Depending on the device, the playback image and sound

may not be synchronised. In this case, select “MODE 1”

• Select “MODE 1” if the sound is interrupted.

Input level

BLUETOOTH

You can change the input level setting if the sound input

level of the Bluetooth

transmission is too low.

1 Press [PLAY MENU] repeatedly to select

“INPUT LEVEL”.

2 Press [R, T] to select the level and then press [OK].

Note:

Select

“LEVEL 0” if the sound is distorted.

█ Note on disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Before playback, finalise the disc on the device it was

recorded on.

• Some CD-R/RW cannot be played because of the

condition of the recording.

█ Note on USB device

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█ Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension “.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

– 999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

MODE 1 Emphasis on connectivity.

MODE 2

(default)

Emphasis on sound quality.

(default)

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 7 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

DAB+

Preparation

Press [RADIO] to select “DAB+”.

Note:

If you select

“DAB+” for the first time, the system will tune

automatically.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

2 Press [R, T] to select the frequency block and then

press [OK].

If no station is detected, “SCAN FAILED” is shown.

Adjust the antenna and try again.

To tune automatically

1 Press [PLAY MENU] to select “AUTOSCAN” and

then press [OK].

“START?” is shown.

2 Press [OK] to start tuning.

“DAB AUTO SCAN” is shown.

If no station is detected, “SCAN FAILED” is shown.

Do manual tuning.

Note:

Preset frequencies are erased after you do automatic tuning.

Memory presetting

You can preset up to 20 stations.

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2 Press [R, T] to select “STATION” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies

the same preset number.

Note:

You cannot preset a station when the station is not

broadcasting or when you have selected a secondary service.

█ Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2 Press [R, T] to select “PRESET” and then press

[OK].

3 Press [2/3] or [5/6] to select the preset

station.

Secondary service

You can listen to secondary services when “ ” is

shown.

1 Press [PLAY MENU] repeatedly to select

“DAB SECONDARY”.

2 Press [R, T] to select the secondary service and

then press [OK].

To cancel, select “PRIMARY”.

Note:

The setting is cancelled when you select other stations.

Viewing available information

You can view the following information on the display

panel:

• Information about the DAB broadcast

• Programme type

• Ensemble label

•Frequency

•Time

Press [DISPLAY].

Checking the signal quality

You can check the signal quality when adjusting the

antenna.

1 Press [PLAY MENU] repeatedly to select

“SIGNAL QUALITY” and then press [OK].

The frequency block followed by the reception quality

is shown.

To select other frequency blocks, press [R , T].

2 Press [OK] again to exit.

Automatic clock adjustment

You can set the clock to update automatically.

1 Press [PLAY MENU] repeatedly to select

“AUTO CLOCK ADJ”.

2 Press [R, T] to select “ON ADJUST” and then press

[OK].

To cancel, select “OFF ADJUST”.

Frequency

block

Frequency Reception quality

0 (poor) to 8 (excellent)

TQBJ0979_en.pl.cz.es.book Page 8 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Radio

Preparation

Press [RADIO] to select “FM”.

Manual tuning

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Press [

] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

“STEREO” is shown when a stereo broadcast is being

received.

Memory presetting

You can preset up to 30 FM stations.

█ Automatic presetting

1 Press [PLAY MENU] to select “A.PRESET”.

Press [

] to select the setting and then press

[OK].

The tuner presets all the stations it can receive into

the channels in ascending order.

To cancel, press [8].

█ Manual presetting

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Press [

] to select “MANUAL” and then press

[OK].

3 Press [2/3] or [5/6] to tune in to the

station.

4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies

the same preset number.

█ Selecting a preset station

1 Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

Press [

] to select “PRESET” and then press

[OK].

3 Press [2/3] or [5/6] to select the preset

station.

Improving the sound quality

1 Press [PLAY MENU] repeatedly to select

“FM MODE”.

2 Press [R, T] to select “MONO” and then press

[OK].

To cancel, select “STEREO”.

“MONO” is also cancelled when you change the

frequency.

To memorise the setting

Continue with step 4 of “Manual presetting”.

Checking the signal status

Press [DISPLAY] to select “FM STATUS”.

RDS broadcasting

This system can show the text data transmitted by the

radio data system (RDS) available in some areas.

Press [DISPLAY] repeatedly.

Note:

RDS may not be available if reception is poor.

LOWEST Tuning begins from the lowest

frequency.

CURRENT Tuning begins from the current

frequency.

FM – – – – The FM signal is in monaural.

The system is not tuned in to a station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the “FM MODE”.

PS Programme service

PTY Programme type

FREQ Frequency

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 9 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Clock and timers

Setting the clock

This is a 24-hour clock.

1 Press [SETUP] repeatedly to select “CLOCK”.

2 Press [R, T] to set the time and then press [OK].

To check the time

Press [SETUP] repeatedly to select “CLOCK” and then

press [OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Play timer

(Except for Bluetooth

source)

You can set the timer to come on at a certain time to

wake you up.

Preparation

Set the clock.

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [R, T] to set the start time and then press

[OK].

3 Do step 2 again to set the end time.

4 Press [R, T] to select the source you want to play

and then press [OK].

To start the timer

1 Press [SETUP] repeatedly to select “TIMER SET”.

2 Press [R, T] to select “SET” and then press [OK].

“#” is shown.

To cancel, select “OFF”.

The system must be switched off for the timer to

operate.

To check the setting

Press [SETUP] repeatedly to select “TIMER ADJ” and

then press [OK].

In standby mode, press [DISPLAY] two times.

Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and then switch on again while

a timer is in operation, the timer will not stop at the end

time.

Sleep timer

The sleep timer switches off the system after the set time.

1 Press [SETUP] repeatedly to select “SLEEP”.

2 Press [R, T] to select the setting (in minutes) and

then press [OK].

To cancel, select “OFF”.

Note:

• The remaining time is shown for a few seconds every

minute.

“SLEEP 1” is always shown when only 1 minute

remains.

• The sleep timer can be used together with the play timer.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

TQBJ0979_en.pl.cz.es.book Page 10 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Sound effects

1 Press [SOUND] repeatedly to select the sound

effect.

2 Press [R, T] to select the setting and then press

[OK].

Note:

Changed settings will be kept until it is changed again, unless

otherwise indicated.

Saving the sound settings

You can save the current sound effects (up to

3 combinations).

Preparation

Select the sound effects.

1 Press [SETUP] to select “SAVE MY SOUND”.

2 Press [R, T] to select a sound setting number and

then press [OK].

“SAVED” is shown.

The new setting replaces the one existing in the same

sound setting number.

To recall the setting

1 Press [SOUND] to select “MY SOUND”.

2 Press [R, T] to select the sound setting number

and then press [OK].

Others

Auto off

This system automatically switches off when you do not

use it for 20 minutes.

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

This function does not work when you are in radio source or

when a Bluetooth

device is connected.

Bluetooth

standby

This function automatically switches on the system when

you establish a Bluetooth

connection from a paired

device.

1 Press [SETUP] repeatedly to select

“BLUETOOTH STANDBY”.

2 Press [R, T] to select “ON” and then press [OK].

To cancel, select “OFF”.

Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.” and

then press [OK].

The software version is shown.

2 Press [OK] again to exit.

MY SOUND “SOUND 1”, “SOUND 2” or “SOUND 3”

(Z“Saving the sound settings”)

PRESET EQ “HEAVY” (default), “SOFT”, “CLEAR”,

“VOCAL” or “FLAT”

BASS –4 to +4 (default: 0)

Using the main unit

1. Press [BASS/TREBLE] to select

“BASS”.

2. Press [2/3] or [5/6].

TREBLE –4 to +4 (default: 0)

Using the main unit

1. Press [BASS/TREBLE] to select

“TREBLE”.

2. Press [2/3] or [5/6].

D.BASS “ON D.BASS” (default) or “OFF D.BASS”

Using the main unit

Press [D.BASS] repeatedly.

SURROUND “ON SURROUND” or

“OFF SURROUND” (default)

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 11 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult

your dealer for instructions.

█ Common problems

The unit does not work.

• The safety device has been activated. Do the following:

1. Press [1] on the main unit to switch the unit to standby

mode. If the unit does not switch to standby mode,

– Press and hold the button for a minimum of

10 seconds. Or,

– Disconnect the AC mains lead and connect it again.

2. Press [1] again to switch on the unit. If the problem

persists, consult your dealer.

No operations can be done with the remote control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the cause,

and then switch on again. It can be caused by straining of

the speakers through excessive volume or power, and

when using the system in a hot environment.

A humming sound can be heard during playback.

• An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

█ Disc

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or

non-standard.

• There is condensation. Let the system dry for 1 to 2 hours.

█ USB

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it are not

compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

The elapsed time shown is different from the actual

play time.

• Transfer the data to another USB device or backup the

data and reformat the USB device.

█ Radio/DAB+

DAB+ reception is poor.

• Keep the antenna away from computers, televisions, other

cables and cords.

Sound is distorted.

• Use an optional outdoor antenna. The antenna should be

installed by a competent technician.

A beat sound is heard.

• Switch off the TV or move it away from the system.

• Move mobile telephones away from the system if the

interference is apparent.

█ Bluetooth

Pairing cannot be done.

• Check the Bluetooth

device condition.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do pairing

again.

• The pairing of the device has been replaced. Do pairing

again.

• This system might be connected to a different device.

Disconnect the other device and try pairing the device

again.

The device is connected but audio cannot be heard

through the system.

• For some built-in Bluetooth

devices, you have to set the

audio output to “SC-PM602”

manually. Read the

operating instructions of the device for details.

Sound from the device is interrupted.

• The device is out of the 10 m communication range. Move

the device nearer to the system.

• Remove any obstacle between the system and the device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.) are

interfering. Move the device nearer to the system and

distance it from the other devices.

• Select

“MODE 1” for stable communication.

Playback image and sound are not synchronised.

• Restart the playback app of the device.

TQBJ0979_en.pl.cz.es.book Page 12 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

█ Main unit displays

“--:--”

• You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

“

ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“

ADJUST TIMER”

• The play timer is not set. Adjust the play timer.

“

AUTO OFF”

• The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button.

“

ERROR”

• An incorrect operation was done. Read the instructions and

try again.

“

F61”

“F77”

• Disconnect the AC mains lead and consult your dealer.

“

F703”

• Examine the Bluetooth

connection.

• Disconnect the Bluetooth

device. Switch off the system

and then switch on again.

“

F76”

• There is a problem with the power supply.

• Disconnect the AC mains lead and consult your dealer.

“

NODEVICE”

• The USB device is not connected. Examine the connection.

“

NO DISC”

• You have not put in a disc.

“NO MEMORY”

• DAB memory presetting has not been done.

“

NO PLAY”

• Examine the content. You can only play supported format.

• The system may have a problem. Switch off the system and

then switch on again.

“NO SIGNAL”

• The station cannot be received. Adjust the antenna.

“

PLAYERROR”

• You played an unsupported MP3 file. The system will skip

that track and play the next one.

“

REMOTE 1”

“REMOTE 2”

• The remote control and the main unit are using different

codes. Change the code of the remote control.

– When “REMOTE 1” is shown, press and hold [OK] and

[ ] for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold [OK] and

[USB/CD] for a minimum of 4 seconds.

“SCAN FAILED”

• Stations cannot be received. Adjust the antenna or do

manual tuning.

“

SOUND 1 NOT SET”

“SOUND 2 NOT SET”

“SOUND 3 NOT SET”

• You have not saved the sound effects into the sound

setting number.

“

USB OVER CURRENT ERROR”

• The USB device is using too much power. Disconnect the

USB device, switch off the system and then switch on

again.

“

VBR”

• The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to the

remote control of this system, change the remote control

code for this system.

Preparation

Press [USB/CD] to select “CD”.

█ To set the code to “REMOTE 2”

1 Press and hold [CD] on the main unit and [USB/CD]

on the remote control.

“REMOTE 2” is shown.

2 Press and hold [OK] and [USB/CD] for a minimum of

4seconds.

█ To set the code to “REMOTE 1”

1 Press and hold [CD] on the main unit and [ ] on

the remote control.

“REMOTE 1” is shown.

2 Press and hold [OK] and [ ] for a minimum of

4seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1 Disconnect the AC mains lead.

2 While you press and hold [1] on the main unit,

connect the AC mains lead again.

Continue to press and hold the button until

“–––––––––” is shown.

3 Release [1].

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

Maintenance

To clean this system, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 13 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Specifications

█ Amplifier section

RMS output power

Front Ch (both ch driven)

20 W per channel (6 Ω), 1 kHz, 10% THD

Total RMS power 40 W

█ Tuner, terminals section

Preset memory FM 30 stations

Frequency modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 Ω (unbalanced)

Headphone jack

Terminal Stereo, 3.5 mm jack

█ DAB+ section

DAB memories 20 channels

Frequency band (wavelength)

Band III 5A to 13F (174.928 MHz to 239.200 MHz)

Sensitivity *BER 4x10

-4

Min requirement –98 dBm

DAB external antenna

Terminal F - Connector (75 Ω)

█ Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 790 nm (CD)

NORSK

Bølgelengde 790 nm (CD)

Laserstyrke Ingen farlig stråling sendes ut

█ USB section

USB port DC OUT 5V, 500 mA

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

█ Bluetooth

section

Version Bluetooth

Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP

Operating frequency 2.4 GHz band FH-SS

Operation distance 10 m line of sight

█ Speaker section

Speaker unit(s)

Woofer 10 cm cone type x 1 per channel

Tweeter 6 cm cone type x 1 per channel

Impedance 6 Ω

Dimensions (W x H x D) 145 mm x 224 mm x 197 mm

Mass 1.9 kg

█ General

Power supply AC 220 V to 240 V, 50 Hz

Power consumption 17 W

Dimensions (W x H x D) 153 mm x 224 mm x 232 mm

Mass 1.4 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

Note:

• Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the digital

spectrum analyser.

Power consumption in standby mode

(With “BLUETOOTH STANDBY” set to “OFF”)

0.3 W (approximate)

Power consumption in standby mode

(With “BLUETOOTH STANDBY” set to “ON”)

0.4 W (approximate)

TQBJ0979_en.pl.cz.es.book Page 14 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

English

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this

product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to

our R&TTE products from our DoC Server:

http://www.doc.panasonic.de

Contact to Authorised Representative: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

Ελληνικά

∆ήλωση συμμόρφωσης (DoC)

Με την παρούσα, η “Panasonic Corporation” δηλώνει ότι

το προϊόν αυτό είναι σύμφωνο με τις βασικές απαιτήσεις

και άλλες σχετικές διατάξεις της οδηγίας 1999/5/EC.

Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο

τουπρωτοτύπου DoC για τα R&TTE προϊόντα μας από

τον DoC server μας:

http://www.doc.panasonic.de

Στοιχεία επικοινωνίας Eξουσιοδοτημένου Aντιπροσώπου:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Γερμανία

Português

Declaração de Conformidade (DoC)

Com o presente documento, a “Panasonic Corporation”

declara que este produto é conforme os requisitos

específicos e demais especificações referentes à

Directriz 1999/5/EC.

Os clientes podem baixar uma cópia da declaração de

conformidade (DoC) para nossos produtos R&TTE do

Server DoC:

http://www.doc.panasonic.de

Contacte o representante autorizado: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Alemanha

Lietuviškai

Atitikties deklaracija (AD)

Bendrovė “Panasonic Corporation” patvirtina, kad šis

gaminys tenkina direktyvos 1999/5/EB esminius

reikalavimus ir kitas taikytinas nuostatas.

Mūsų R&TTE gaminių originalios atitikties deklaracijos

kopiją klientai gali atsisiųsti iš mūsų AD serverio:

http://www.doc.panasonic.de

Įgaliotojo atstovo adresas: “Panasonic Marketing Europe

GmbH”, Panasonic Testing Centre, Winsbergring 15,

22525 Hamburg, Vokietija

Slovensko

Izjava o skladnosti (DoC)

S pričujočo izjavo podjetje “Panasonic Corporation”

izjavlja, da so svoji izdelki skladni s poglavitnimi

zahtevami in drugimi odgovarjajočimi predpisi direktive

1999/5/ES.

Stranka lahko naloži izvod izvirnega DoC o naših izdelkih

R&TTE s strežnika DoC:

http://www.doc.panasonic.de

Pooblaščeni zastopnik: Panasonic Marketing Europe

GmbH, Panasonic Testing Centre, Winsbergring 15,

22525 Hamburg, Nemčija

Slovensky

Vyhlásenie o zhode (DoC)

“Panasonic Corporation” týmto prehlasuje, že tento

výrobok je v zhode so základnými požiadavkami a ďalšími

príslušnými ustanoveniami smernice 1999/5/ES.

Zákazníci si môžu stiahnuť kópiu pôvodného DoC na

naše R&TTE výrobky z nášho servera DoC:

http://www.doc.panasonic.de

Kontakt na splnomocneného zástupcu: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Nemecko

Norsk

Samsvarserklæring (DoC)

Herved erklærer “Panasonic Corporation” at dette

produktet samsvarer med de viktige kravene og andre

relevante deler av direktivet 1999/5/EC.

Kunder kan laste ned en kopi av det originale DoC til våre

R&TTE-produkter fra vår DoC-server:

http://www.doc.panasonic.de

Kontakt vår autoriserte representant: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Tyskland

Eesti keel

Vastavusdeklaratsioon (DoC)

“Panasonic Corporation” kinnitab käesolevaga, et see

toode on vastavuses põhiliste nõuete ja muude direktiivi

1999/5/EÜ asjakohaste sätetega.

Klie

ndid saavad

koopia meie R&TTE toodetele kehtiva

originaalvastavusdeklaratsiooni koopia alla laadida meie

DoC serverist:

http://www.doc.panasonic.de

Võtke ühendust volitatud esindajaga: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 15 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Latviski

Atbilstības deklarācija (DoC)

Kompānija “Panasonic Corporation” ar šo paziņo, ka šis

izstrādājums atbilst būtiskām prasībām un citām

saistošām Direktīvas 1999/5/EK prasībām.

Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu R&TTE

izstrādājumos no mūsu DoC servera:

http://www.doc.panasonic.de

Lūdzam sazināties ar pilnvaroto parstāvi: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

Български

Декларация за съответствие (DoC)

“Panasonic Corporation” декларира, че този продукт

съответства на съществените изисквания и другите

приложими разпоредби на Ди

ректива 1

999/5/EC.

Потребителите могат да свалят копие от оригиналните

DoC към нашите продуктите от типа R&TTE от

сървъра, на който се съхраняват DoC:

http://www.doc.panasonic.de

За контакт с оторизиран представител: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Германия

Român

Declaraţie de Conformitate (DoC)

Prin prezenta, societatea “Panasonic Corporation”

declară că produsul este conform cu cerinţele esenţiale şi

cu alte norme corespunzătoare Directivei 1999/5/EC.

Clienţii pot descărca o copie a DoC-ului original al

produselor noastre R&TTE de la adressa noastră DoC din

Internet:

http://www.doc.panasonic.de

Contact la Reprezentanţa autorizată: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germania

Magyar

Megfelelőségi Nyilatkozat (DoC)

Ezennel a, “Panasonic Corporation” kijelenti, hogy a jelen

termék kielégíti az 1999/5/EK Irányelv létfontosságú

követelményeit és más vonatkozó rendelkezéseit.

A vásárlók letölthetik az R&TTE termékek eredeti DoC

másolatát a DoC szerverünkrő

://www.doc.panasonic.de

Forduljon a hivatalos márkaképviselethez: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Németország

Hrvatski

Deklaracija o podobnosti (DoC)

Ovime, “Panasonic Corporation” izjavljuje da je ovaj

proizvod udovoljava osnovnim zahtjevima i ostalim

relevantnim uvjetima Smjernice 1999/5/EC.

Kupci mogu preuzeti kopiju originalne DoC za naše

R&TTE proizvode s našeg DoC poslužitelja:

http://www.doc.panasonic.de

Obratite se ovlaštenom predstavniku: Panasonic

Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Njemačka

Türkçe

Uygunluk Beyanı (DoC)

“Panasonic Corporation” işbu belge ile bu ürünün

1999/5/EC sayılı Direktif'in temel gereklerine ve diğer ilgili

hükümlerine uygun olduğunu beyan etmektedir.

Müşterilerimiz R&TTE ürünlerimizle ilgili orijinal DoC

belgesinin bir kopyasını DoC sunucumuzdan indirebilir:

http://www.doc.panasonic.de

Yetkili Temsilci ile temasa geçin: Panasonic Marketing

Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

TQBJ0979_en.pl.cz.es.book Page 16 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

References

About Bluetooth

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law:

– Taking apart or modifying the main unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

equipped devices is not guaranteed.

• All devices must conform to standards set by

Bluetooth SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth

security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient.

Transmit data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the

environment, obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to

other Bluetooth

devices or the devices that use the

2.4 GHz band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc.).

Licenses

Panasonic bears no responsibility for data and/or

information that can possibly be compromised during a

wireless transmission.

The Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use

of such marks by Panasonic Corporation is under

license. Other trademarks and trade names are those of

their respective owners.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling

systems

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries must not be mixed with general

household waste.

For proper treatment, recovery and recycling

of old products and used batteries, please

take them to applicable collection points in

accordance with your national legislation.

By disposing of them correctly, you will help

to save valuable resources and prevent any

potential negative effects on human health

and the environment.

For more information about collection and

recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

ENGLISH

TQBJ0979_en.pl.cz.es.book Page 17 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Zakupione urządzenie może różnić się od przedstawionego

na ilustracjach.

Niniejsza instrukcja obsługi ma zastosowanie do

następującego zestawu.

Symbole na tym produkcie (włącznie z akcesoriami)

oznaczają, co następuje:

Dostarczone wyposażenie

Sprawdzić i znaleźć poszczególne elementy dostarczonego

wyposażenia.



1 Przewód zasilania



1 Antena DAB



1 Pilot zdalnego sterowania

(N2QAYB000984)

Spis treści

Dostarczone wyposażenie. . . . . . . . . . . . . . . . . . . . . . 2

Środki ostrożności . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Podłączenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Rozmieszczenie głośników . . . . . . . . . . . . . . . . . . . . . 3

Opis elementów sterowania . . . . . . . . . . . . . . . . . . . . 4

Przygotowanie pilota zdalnego sterowania . . . . . . . . 4

Przygotowanie multimediów . . . . . . . . . . . . . . . . . . . . 5

Odtwarzanie multimediów. . . . . . . . . . . . . . . . . . . . . . 6

DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Zegar i timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Efekty dźwiękowe . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Inne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rozwiązywanie problemów. . . . . . . . . . . . . . . . . . . . 12

Konserwacja. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Dane techniczne . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Odnośniki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Środki ostrożności

OSTRZEŻENIE!

Urządzenie

• Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Nie należy wystawiać urządzenia na działanie

deszczu, wilgoci, kapanie lub zachlapanie.

– Na urządzeniu nie należy umieszczać żadnych

przedmiotów napełnionych płynami, np. dzbanków.

– Należy stosować tylko zalecane akcesoria.

– Nie zdejmować pokrywy.

– Użytkownik nie powinien podejmować się naprawy

urządzenia na własną rękę. Serwis należy zlecić w

autoryzowanym punkcie serwisowym.

– Należy uważać, aby do wnętrza urządzenia nie

dostały się metalowe przedmioty.

UWAGA!

Urządzenie

• Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Niniejszego urządzenia nie należy instalować lub

umieszczać w biblioteczce, wbudowanej szafce lub

innej ograniczonej przestrzeni. Należy zapewnić

odpowiednią wentylację urządzenia.

– Nie zasłaniaj otworów wentylacyjnych urządzenia

gazetami, obrusami, zasłonami i podobnymi

przedmiotami.

– Nie umieszczać na urządzeniu źródeł otwartego

ognia, jak np. zapalone świece.

• Urządzenie jest przeznaczone do używania w klimacie

umiarkowanym.

• To urządzenie może odbierać zakłócenia wywołane

użyciem telefonu komórkowego. Jeżeli takie

zakłócenia wystąpią, wskazane jest zwiększenie

odległości pomiędzy urządzeniem a telefonem

komórkowym.

• Urządzenie wykorzystuje promień lasera. Sterowanie,

regulacje lub postępowanie w sposób tutaj nie

określony grozi niebezpiecznym naświetleniem

promieniami lasera.

Przewód zasilania

•Wtyczka przewodu sieciowego umożliwia odłączenie

zasilania urządzenia. Urządzenie należy zamontować w

sposób umożliwiający szybkie wyjęcie wtyczki z

gniazda zasilania.

Bateria

• Istnieje niebezpieczeństwo wybuchu w przypadku, gdy

baterie zostaną nieprawidłowo założone. Baterie należy

wymieniać na takie same lub na baterie

równorzędnego typu, zalecane przez producenta.

• Zużyte baterie należy odpowiednio zutylizować.

Właściwą metodę powinny wskazać władze lokalne.

• Nie zbliżać baterii do źródeł ciepła lub ognia.

• Baterii nie należy pozostawiać przez dłuższy czas, w

pojeździe z zamkniętymi drzwiami i oknami, narażonym

na bezpośrednie promieniowanie słoneczne.

• Nie wolno zwierać biegunów baterii ani jej rozbierać.

• Nie ładować baterii alkalicznych ani manganowych.

• Nie wolno używać baterii, z których została zdjęta

warstwa ochronna.

• Jeśli pilot ma nie być używany przez dłuższy czas,

należy wyjąć z niego baterię. Przechowywać w

chłodnym, ciemnym miejscu.

Zestaw

SC-

PM602

Urządzenie główne

SA-

PM602

Głośniki

SB-PM500

Z SIECI PRĄDU PRZEMIENNEGO

Sprzęt klasy II (konstrukcja urządzenia

zapewnia podwójną izolację).

WŁ

Gotowość

TQBJ0979_en.pl.cz.es.book Page 2 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Podłączenie

Przewód zasilania podłączyć do gniazdka sieciowego

dopiero po wykonaniu wszystkich pozostałych połączeń.

Podłącz antenę DAB.

Należy dokładnie dokręcić nakrętkę.

Nie używać innych zasilaczy antenę DAB za wyjątkiem

dołączonego.

W przypadku słabego odbioru należy zastosować

antenę zewnętrzną.

Podłącz głośniki.

Podłącz przewód zasilania.

Nie stosować przewodów zasilania, pochodzących z

innych urządzeń.

Oszczędzanie energii

System pozostając w trybie spoczynku zużywa małą

moc (

„Dane techniczne”). Gdy system nie jest

używany, należy go odłączać od zasilania.

Po odłączeniu systemu od zasilania niektóre ustawienia

zostaną utracone. Konieczne będzie ich ponowne

ustawienie.

Rozmieszczenie głośników

Zestawy głośnikowe lewy i prawy są identyczne.

Prosimy używać tylko zestawów głośnikowych

znajdujących się w wyposażeniu.

Użycie innych zestawów głośnikowych grozi uszkodzeniem

urządzenia i pogorszeniem jakości dźwięku.

Uwaga:

• Aby zapewnić odpowiednią wentylację, należy zachować

przynajmniej 10 mm odstępu między zestawami

głośnikowymi a urządzeniem głównym.

• Zestawy głośnikowe należy ustawić na płaskim, stabilnym

podłożu.

• Niniejsze zestawy głośnikowe nie mają ekranu

magnetycznego. Nie należy ich umieszczać w pobliżu

odbiorników telewizyjnych, komputerów ani innych

urządzeń wrażliwych na oddziaływanie pola

magnetycznego.

• Długotrwałe odtwarzanie przy dużym poziomie głośności

może spowodować uszkodzenia zestawów głośnikowych i

skrócić jego żywotność.

• Aby uniknąć uszkodzenia urządzenia, w następujących

przypadkach należy zmniejszyć głośność:

– W przypadku zniekształcenia dźwięku.

– Podczas regulacji brzmienia dźwięku.

• Aby zapobiec uszkodzeniu zestawów głośnikowych,

proszę nie dotykać stożków głośnikowych, jeśli siatki

zostały ściągnięte.

Uważaj, aby nie

krzyżować (zwierać) lub

odwracać polaryzacji

przewodów głośnikowych,

gdyż można w ten sposób

uszkodzić głośniki.

(6:)

Taśma klejąca

(nie należy do

wyposażenia)

Czerwony

Czarny

UWAGA!

•

Zestawów głośnikowych należy używać wyłącznie z

zalecanym systemem. W przeciwnym wypadku może

dojść do uszkodzenia wzmacniacza, zestawów

głośnikowych i do pożaru. W przypadku uszkodzenia

urządzenia lub nagłej zmiany w jakości odtwarzania

należy zwrócić się po radę do wykwalifikowanego

specjalisty.

•

W celu podłączenia zestawów głośnikowych należy

zastosować procedury opisane w niniejszej instrukcji.

Do domowego

gniazdka

zasilającego

POLSKI

TQBJ0979_en.pl.cz.es.book Page 3 Monday, August 22, 2016 4:24 PM

offset printing

TQBJ0979

Opis elementów sterowania

Opisane procedury należy wykonać za pomocą pilota zdalnego sterowania. Można również użyć przycisków na panelu

przednim urządzenia, jeśli są identyczne.

A Przełącznik „STANDBY/ON”

[

], [

]

Naciśnij ten przycisk, aby wyłączyć urządzenie

(przełączyć je w stan gotowości) lub włączyć je z

powrotem. W stanie gotowości urządzenie nadal

pobiera pewną niewielką moc.

Wybór źródła audio

Na urządzeniu głównym:

Aby rozpocząć parowanie Bluetooth

, naciśnij i

przytrzymaj [ –PAIRING].

C Podstawowe elementy sterowania odtwarzaniem

D Wyświetl menu konfiguracji

E Wyświetl zawartość

F Wybierz lub potwierdź opcję

G Otwieranie lub zamykanie kieszeni napędu płyt

Zmniejszanie jasności wyświetlacza

Ponownie naciśnij przycisk, aby anulować wybór.

I Dostosuj poziom głośności

Wycisz dźwięk

Ponownie naciśnij przycisk, aby anulować wybór.

„MUTE” można wyłączyć również przez regulowanie

głośności lub wyłączając system.

K Wyświetlenie menu odtwarzania

L Wybór charakterystykę dźwięku

M Wyświetlacz

Czujnik zdalnego sterowania

Odległość: W granicach około 7 m

Kąt: W przybliżeniu 20° w pionie, 30° w poziomie

Gniazdo słuchawek (

)

Typ wtyku: o średnicy Ø 3,5 mm, stereo (nie należy do

wyposażenia)

– Nadmierne ciśnienie akustyczne dźwięku

wydobywającego się ze słuchawek czy słuchawek

nagłownych może powodować utratę słuchu.

– Głośne słuchanie przez dłuższy okres czasu może

doprowadzić do uszkodzeń w uchu wewnętrznym.

P Gniazdo USB ( )

Q Kieszeń napędu płyt

Przygotowanie pilota zdalnego

sterowania

Należy stosować baterie alkaliczne lub manganowe.

Załóż baterię tak, aby jej bieguny (+ i –) były zgodne z

oznaczeniami wewnątrz obudowy pilota zdalnego

sterowania.

(

nie należy do

wyposażenia

)

TQBJ0979_en.pl.cz.es.book Page 4 Monday, August 22, 2016 4:24 PM

offset printing

Strona się ładuje...

Panasonic SCPM602EG Instrukcja obsługi

Marka: Panasonic

Model: SCPM602EG

Kategoria: Smartwatche

Typ: Instrukcja obsługi

Pobierz PDF

raport

w innych językach

español: Panasonic SCPM602EG Instrucciones de operación
slovenčina: Panasonic SCPM602EG Návod na používanie
English: Panasonic SCPM602EG Operating instructions

Panasonic SCPM602EG Instrukcja obsługi

Panasonic SCPM602EG Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty