Novus NDR-HA4208 Instrukcja obsługi

NDR-HA4208

NDR-HA4416

U s e r ’s m a n u a l

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

2

EMC (2004/108/EC) and LVD (2006/95/EC ) Directives

CE Marking

Our products are manufactured to comply with requirements of following directives and national

regulations implementing the directives:

• Electromagnetic compatibility EMC 2004/108/EC.

• Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical

equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well

as 75VDC and 1500VDC.

WEEE Directive 2002/96/EC

Information on Disposal for Users of Waste Electrical and Electronic Equipment

This appliance is marked according to the European Directive on Waste Electrical and Electronic

Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of correctly,

you will help to prevent potential negative consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product, or the documents accompanying the product, indicates that this appliance

may not be treated as household waste. It shall be handed over to the applicable collection point for the

waste electrical and electronic equipment for recycling purpose. For more information about recycling

of this product, please contact your local authorities, your household waste disposal service or the shop

where you purchased the product.

RoHS Directive 2002/95/EC

Concerning for human health protection and friendly environment, we assure that our products falling

under RoHS Directive regulations, regarding the restriction of the use of hazardous substances in

electrical and electronic equipment, were designed and manufactured in compliance with mentioned

regulation. Simultaneously, we claim that our products were tested and do not contain hazardous

substances exceeding limits which could have negative impact on human health or natural

environment.

Information

The device, as a part of professional CCTV system used for surveillance and control, is not designed

for self installation in households by individuals without technical knowledge.

COMMENTS AND WARNINGS

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

3

SAFETY REQUIREMENTS

ATTENTION!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE GIVEN

PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE

PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT, ITS

MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE

MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED.

1. The installation of NDR-HA4208, NDR-HA4416 should be made by a qualified service person or a

professional safety system installer.

2. Recorders mustn’t be placed in places where ventilating holes are partially or fully covered.

3. User’s interference inside the device is not allowed and is unnecessary as it does not have any

systems which require adjusting or which are suitable for self-repair. You mustn’t dismantle the

recorder or remove any single fastening screws. If any repairs are necessary contact the service.

The device must be take care of and protected against any mechanical damage.

4. The recorder has to be protected against humidity and dust. In case the recorder had a contact with

water react immediately: switch off the power supply and contact the authorised Novus service. If

the device gets dirty it might get damaged or electrocute someone.

5. The device can only be cleaned with a damp cloth after the power supply has been switched off.

Avoid strong detergents (liquids and sprays). Mild detergents can be used if the recorder becomes

very dirty.

6. Power supply unit cords and signal cords should be laid in a way that eliminates the risk of

mechanical damage; special attention should be paid to the plug. Be careful not to overload sockets

and extension cords so that there is no fire.

7. To avoid recorder’s damage vision and control signals should be equipped with systems protecting

against disturbances, over voltage and atmospheric discharge that are in compliance with Polish

regulations. It is also advised to use ground loop isolators.

8. The device mustn’t be used in conditions which do not fulfil operating requirements as far as power

supply, relative humidity or air temperature are concerned.

9. You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a

metal object gets inside the device contact the authorised Novus service immediately.

10. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other

media occurred during the usage of the product.

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

4

1. FOREWORD INFORMATION ............................................................................................. ..6

1.1 Main Characteristics ........................................................................................................... 6

1.2 Recorder’s technical data ................................................................................................. ...7

2. STARTING THE DEVICE....................................................................................................... 8

2.1 Getting the device ready to work ....................................................................................... 8

2.2 Electrical connection and other back panel elements ....................................................... 9

2.3 Connecting of peripheral equipment ............................................................................... 12

2.4 Front panel description ................................................................................................... 13

2.5 Remote controller ........................................................................................................... 16

2.6 HDD Installation ............................................................................................................ 16

3. RECORDER’S MENU ............................................................................................................ 19

3.1 System Menu .................................................................................................................. 20

3.1.1 Information ............................................................................................................. 20

3.1.1.1 System log ................................................................................................... 21

3.1.1.2 Recording range .......................................................................................... 21

3.1.2 Date /time ............................................................................................................... 22

3.1.3 Disks ....................................................................................................................... 22

3.1.4 Users ....................................................................................................................... 26

3.1.5 System shutdown .................................................................................................... 28

3.1.6 User logout ............................................................................................................ 28

3.2 Network ........................................................................................................................... 29

3.2.1.1 Network ....................................................................................................... 29

3.2.1.2 LAN ............................................................................................................ 30

3.2.1.3 Modem ........................................................................................................ 31

3.2.1.4 DVRNS ....................................................................................................... 31

3.2.2 Notifying ................................................................................................................ 32

3.2.2.1 E-mail .......................................................................................................... 32

3.2.2.2 Call-back connection ................................................................................... 32

3.3 Devices .......................................................................... ........................................... .......33

3.3.1 Cameras .................................................................................................................. 33

3.3.2 Audio ...................................................................................................................... 35

3.3.3 Alarm-out ............................................................................................................... 35

3.3.4 Display ................................................................................................................... 37

3.3.5 Remote control ....................................................................................................... 39

3.4 Recording ......................................................................................................................... 40

3.4.1.Record .................................................................................................................... 40

3.4.2 Schedule ................................................................................................................. 42

3.4.3. Pre-event ............................................................................................................... 43

3.5 Event ................................................................................................................................ 44

3.5.1. Alarm-in ................................................................................................................ 44

3.5.2. Motion detection ................................................................................................... 46

3.5.3. Video loss…………………………………………………………………………47

3.5.4. Video blind ........................................................................................................... 48

3.5.5. System event ......................................................................................................... 48

4. RECORDER’S OPERATION ............................................................................................... 50

4.1 Live monitoring ............................................................................................................... 50

4.2 Active cameo mode ........................................................................................................ 51

4.3 PIP mode ......................................................................................................................... 51

4.4 ZOOM mode ................................................................................................................... 51

4.5 PTZ mode ........................................................................................................................ 51

TABLE OF CONTENT

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

5

4.6 Image adjustment ............................................................................................................ 52

4.7 Event monitoring ............................................................................................................. 53

4.8 Covert cameras ................................................................................................................ 53

4.9 Spot monitor .................................................................................................................... 53

4.10 Recording video ............................................................................................................. 54

4.11 Recording audio ............................................................................................................. 54

4.12 Playing recorded video .................................................................................................. 54

4.13 Searching video ............................................................................................................. 55

4.13.1 Calendar search ..................................................................................................... 55

4.13.2 Event log search .................................................................................................... 56

4.13.3 Motion search ........................................................................................................ 58

4.13.4 Go to the date/time ................................................................................................. 59

4.15 Record table search ........................................................................................................ 60

4.16 Clip copy ........................................................................................................................ 61

4.17 Playback ......................................................................................................................... 63

5. PTZ CAMERAS CONTROL AND CONNECTION .............................................................. 66

6. CONNECTING DEVICES TO ALARM INPUTS AND OUTPUTS ....................................... 68

7. RECORDER’S OPERATING FROM NV-KBD60 SYTEM KEYBOARD ........................... 69

8. DISPLAYING TEXT ON THE IMAGE .................................................................................. 70

8.1 DISPLAYING TEXT ON THE IMAGE ......................................................................... 70

8.2 TRANSACTION SEARCH ............................................................................................. 73

9. SYSTEM STATUS .................................................................................................................. 75

10. USING A MOUSE .................................................................................................................. 76

TABLE OF CONTENT

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

6

1. FOREWORD INFORMATION

NDR-HA4208 (8-channel) and NDR-HA4416 (16-channel) recorders were designed especially for

CCTV systems. A very efficient H.264 compression is utilised, guaranteeing detailed, high quality

images recorded for a long period of time. It also allows for flexible recording parameters adjustment

depending on system requirements.

1.1. Main characteristics

• 8 or 16 (depending on the model) arterial BNC inputs,

• Compatible with color (NTSC, PAL) and black-and-white (CCIR, EIA-170) Video Sources,

• Auto detection for NTSC and PAL ,

• Multiple monitor connectors: 1 BNC Video Out, 1 Spot, 1 VGA

• Multiple search modes (Date/Time, Calendar, Event)

• System menu displayed on the screen (OSD menu),

• Recording speed up to 400(200 for NDR-HA4208) images per second,

• Hard drive overwrite function,

• 2 USB 2.0 ports,

• Independent recording, playback, live monitoring feature and network connections,

• User-friendly graphic interface,

• 4-Channel Audio Recording ,

• Speaker output,

• Built-in text input for ATM and POS,

• Alarm Connections Include: Input, Output and Reset Input

• Remote access to Live Monitoring Feature, recordings, menu settings, system diagnostics and

camera control via TCP/IP network or modem connection,

• Embedded Web Server ,

• Server/recorder time check,

• Self-diagnostics with automatic notification,

• Infrared remote control,

• Advanced system of user privileges and access rights,

• H.264 compression with image quality parameter configuration,

• RS-485 port for remote control via NV-KBD70 system keyboard ,

• Possibility of copying files onto the USB or DVD drives.

The list of recommended disk models and their capacity is available on Novus Security website in the

Compatible Disks and DVD file in the product tab

FOREWORD INFORMATION

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

7

1.2. RECORDER’S TECHNICAL DATA

Model

NDR-HA4208

NDR-HA4416

Operation Mode

QUADRUPLEX

Operating System

Linux

Video Input

8 x BNC, loop-through

16 x BNC, loop-through

Video Output

Main Monitor (1 x BNC, 1 x VGA), Spot Monitor (1 x BNC)

Alarm Input

8

16

Alarm Output

2 relays

Audio Input/Output

2 x RCA / 1 x RCA

Recording Speed

200 fps (360x 288), 100 fps (720 x 288), 50 fps

(720x576),

Compression

H.264 - own algorithm

Recording Resolution

720x 576,720 x 288, 360 x 288

Recording Mode

Time-lapse, Event (Alarm, Motion detection and/or “Text-in”)

Display Speed

200 fps (real-time)

400 fps (real-time)

Display Screen

Full screen, 4, 9, PiP, sequence, user defined, freeze

image function, digital zoom of a chosen screen

area: 2x

Full screen, 4, 9, 16, PiP, sequence, user defined,

freeze image function, digital zoom of a chosen

screen area: 2x

Motion Detection

768 detection windows (24x32 grid) with sensitivity & active areas cells number needed for alarm

activation defined individually for each channel

Video Loss Detection

Yes

Schedule Recording

Individually adjustable for each day/specific days (holidays etc.) per camera, combination of individual

recording modes possibility

Recorded Data Search

By date/time or events (motion, disappeared object, “Text-in”)

Event History Log

Up to 5 000 system events and unlimited alarm events

Time Synchronization

Automatic time synchronization with NTP server

System Diagnostic

Automatic control of HDD bad sectors number (“Health”) & temperature status with local and network

notification function

Storage

Supports up to 3 internal HDDs , 1 HDD 500 GB in-set included

Backup

Onto CD/DVD, HDD or USB Flash Memory through USB port, through the network

DVD-RW Drive

Not included

External Ports

1 x Ethernet - RJ-45 interface, 10/100 Mbit/s, 2 x USB 2.0 for external drives (HDD, PC mouse, Flash

Memory), 1 x RS-485 for PTZ cameras or NV-KBD70, NV-KBD60 & NV-KBD30 keyboards,

1 x RS-232 for POS, ATM, AC etc.

PTZ Functions

PTZ cameras control directly from the device and through the network (RASplus, IE)

Protocol

Novus-C, Novus-C1, Pelco-D and others

Control

Front panel, Network (RASplus, IE), NV-KBD70,NV-KBD60, NV-KBD30 keyboards, USB PC mouse,

Remote Control

Set-up

Multi-lingual On Screen Display (OSD)

Software

RASplus

User Authorization

Creation of user groups and accounts with diverse grants, password protection

Auto System Recovery

Hardware WATCHDOG function

Power Supply

100~240 VAC

Power Consumption

Approx. 90 W with 4 HDDs

Operating Temperature

5°C ~ 40°C

Relative Humidity

0% ~ 80% (non-condensing)

Dimensions (mm)

430 (W) x 88 (H) x 405 (D)

Weight

7.6 kg (without HDD)

Rack Mount

Standard EIA 19”, 2U

400 fps (360 x 288), 200 fps (720 x 288), 100 fps

(720x576),

FOREWORD INFORMATION

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

8

Unpack the device carefully.

After unpacking please ensure that package contains the following items:

If any of the elements has been damaged during transport, please pack the items back into the original

packaging and contact your supplier.

ATTENTION!

If the device was brought from a location with lower temperature, please wait until it reaches the

temperature of location it is currently in. Turning the device on immediately after bringing it from a

location with lower ambient temperature is forbidden, as the condensing water vapour may cause short-

circuits and damage the device as a result.

Note: Please get familiarized with description and functions of rear panel inputs.

2. STARTING THE DEVICE

2.1. Getting ready to work

NDR-HA4208 / NDR-HA4416 recorder.

Rack mounting bracket with screws for install-

ing additional HDDs. Power cord.

CD with a user’s manual and

network software. User’s manual and network

software guide

STARTING THE DEVICE

Remote controller

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

9

2.2. Electrical connection and other rear panel elements

NDR-HA4416 rear view

Fan cooling power supply unit, please do not cover!

1,2. VIDEO IN/LOOP: video inputs with loop-through outputs, for connecting video signal

sources with the DVR ( 16 or 8 channels depending on the model).

3. RS-485: RS-485 bus connector for remote controlling of speed dome cameras

or NV-KBD30, NV-KBD70 keyboard systems. Only one of the

aforementioned devices may be connected in the same time.

4. ALARM INPUTS: 16 or 8 (depending on a model) alarm inputs, which may be set either as

normal open (N.O.) or normal closed (N.C.). In order to detect the alarm

signal it should last 0.5sec at least. All GND connectors are common

grounded. The ground of the alarm device needs to be connected to one of

the GND connectors.

ALARM OUTPUTS The DVR is capable of activating external devices such as buzzers, halide

lamps, sirens etc. via its relay outputs. Max current for the output is 1A for

30VDC and 0.5 A for 125VAC.

ARI (Alarm Reset Input): External signal applied to ARI and GND connectors is able to

deactivate active relay output together with the internal buzzer of the

recorder. The voltage of the applied signal should be at least 0,3V and last

for about 0,5sec.

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

10

NDR-HA4416 rear view

STARTING THE DEVICE

5. NETWORK: RJ-45 connector for connecting the DVR to the computer network in

10/100Mb/s standard.

6. RS-232 PORT: Allows for connection of modems for remote video preview, connection o f

external keyboards (optional) or devices generating the ASCII codes for

additional information (cash registers, ATM machines). Only one of the

devices may be connected at once. If transmission standard of connected

device is different than RS-232, you need to use additional device (e.g. such

as NVRS-001RSC) to change standard transmission from RS-485 to RS-

232.

7. AUDIO IN : 4 audio mono inputs (RCA type) for connecting microphones.

Note: sound recording may be conducted only when law regulations of

a given country allow for such activities.

Audio inputs are not equipped with pre-amplifiers, so connecting the

microphones directly to the inputs is not advised. Usage of preamplifiers is

recommended.

AUDIO OUT: Audio output for connecting speaker and amplifier. Connecting the speaker

directly to the outputs is not advised. Usage of pre-amplifier is

recommended.

Attention: Cord used for connecting to RS-232 port is not included with the set.

Make sure that the cord you have is appropriate. (DB9S female connector).

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

11

STARTING THE DEVICE

Widok NDR-HA4416

8. SPOT 1 BNC outputs for SPOT monitor allowing for full screen display of any

camera or sequence of cameras;

VIDEO OUT, Main monitor connectors, BNC or VGA type. VGA output allows for

connecting the main monitor in the computer mode. Please use signal cord

provided with the monitor when using said connection type.

9. RESET

10. Power socket for connecting 100 ~ 230 V AC, please ensure that the plug

is sitting firmly in the socket and that the power socket in the wall is

equipped with a grounding pin. Do not bend the power cable excessively.

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

12

2.3. Connecting peripherals

System connection should be performed only by qualified personnel. Please familiarize yourself with

the scheme located below, depicting possible implementation of the DVR in the system, before

installation.

Depending on requirements, each system will have different number of peripherals connected.

Monitors, cameras etc. should be purchased separately, depending on current needs. Detailed

description of peripheral connections can be found in the following chapters of this manual.

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

13

2.4. Front panel description

NDR-HA4416 View

STARTING THE DEVICE

Some buttons of the front panel are used for different functions. Below, you have the description of all

buttons and their functions.

NOTE: a mouse with USB interface can be used for recorder’s control and setting. All the details can

be found in the following chapters of the manual.

1. POWER LED When solid red, indicates that the device is turned on

2. HDD LED Flashing LED indicates that the HDD is either in recording or

playback mode.

3. ALARM LED Solid light when alarm has been triggered and / or internal

buzzer is active.

4. NETWORK LED Flashing of NETWORK LED means that the device is connected

to Ethernet or external modem.

5. CLIP COPY LED Emits solid light when copying is in progress.

6. CHANNEL BUTTONS Press one of the channel buttons to display required camera in full

screen mode. Channel buttons are used for setting and entering the

password. Holding any channel button for 3 seconds allows to

enter image setting menu (brightness, contrast, saturation, hue).

In PTZ mode press 1 button to zoom in , button 2 to zoom out

Buttons 3 and 4 set the sharpness, button 5 e n a b l e s

PRESET function, button 6 saves PRESET.

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

14

7. PLAY / PAUSE Press the PLAY/PAUSE button to play stored images at normal

speed. Pressing the button in the Playback mode pauses the

video.

8. Used for navigating through OSD menu, and changing parameter

values with and buttons. In PTZ mode navigation buttons

are used for speed dome cameras control.

In PIP mode and buttons are used for changing the

position of PIP window. and buttons are used to change

size of the PIP window.

In DISPLAY mode pressing fast playback butons

buttons speeds up the playback, with the speed indicated by

icons visible on the screen.

press or in PAUSE mode to watch picture frame by frame.

9. MENU/CAMEO Press MENU button to enter the DVR menu.

Pressing and holding MENU button for 2 seconds while in screen

division display mode starts sequence display. Function allows to

change the sequence of camera display in screen division mode on

the main monitor or start sequence display on the SPOT monitor

fullscreen.

10. PLAYBACK Press PLAYBACK button to enter or exit Playback mode.

▲ ▼

▲ ▼ ► ◄

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

15

11. ZOOM/PTZ Press the ZOOM button to zoom the currently displayed image.

A rectangular PIP displays the zoomed-in area. Please use

the arrow buttons to move the rectangle through the screen.

Press the PTZ button to enter the PTZ (Pan/Tilt/Zoom) mode

which allows for remote camera controlling.

12. DISPLAY Toggles between different display formats. The available formats

are: full, 4x4, 3x3, 2x2 and PIP. Press and hold DISPLAY

button for 2 seconds to display selected camera on the SPOT

monitor.

13. SEQUENCE Consecutive pressing of the SEQUENCE button while in full

screen live camera display successively switches between the

cameras. Press and hold SEQUENCE button for 2 seconds to

start automatic sequence display.

14. CLIP COPY CLIP COPY button allows to copy selected recordings onto

DVD or Flash type memory.

15. ALARM Press ALARM button to deactivate internal buzzer and active

relay outputs. Pressing ALARM button in live mode opens event

register. This function may be password protected.

16. PANIC Pressing the PANIC button starts recording on all channels,

and displays on the main screen.

17. USB USB port for Mouse, Printer , POS or Flash memory.

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

16

Remote Controller

NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.

2.5 HDD installation

DVR’s NDR-HA4208 i NDR-HA4416 supports up to 4 hard disks (3 HDDs with DVD burner).

NOTE: To obtain the latest info on compatible disks together with their maximum supported

capacities please contact your supplier or visit the www.novuscctv.com website.

NOTE: HDDs previously used in any other device need to be formatted. Please keep that in

mind due to the possibility of important data loss.

ATTENTION: The list of compatible HDDs contains all the HDDs that are compatible with a

given DVR including HDDs designed to office use (desktop disks). However, due

to the fact that reliability of the recording process and data safety are most

important factors of any CCTV system, we strongly advise to use HDDs

designed for continuous (24/7) operation.

TURNING ON THE POWER

After connecting the power cord to the DVR it takes approximately 60 seconds to initialize.

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

17

Before installing a hard drive (HDD), DVD drive (ODD), please make sure the power is disconnected

from the DVR. A factory recommended HDD, ODD should be used for this installation.

To install a HDD, ODD on your DVR :

1. Remove the lid of the DVR by unfastening the

screws.

2. Install the HDD in the HDD rack using the provided screws. Connect power and SATA cables to

the HDD.

STARTING THE DEVICE

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

18

STARTING THE DEVICE

3. Install the ODD in the ODD rack using screws provided by ODD manufacturer. Connect power

and SATA cables to the ODD.

4. Connect HDD, ODD to the motherboard of the DVR with the included SATA cables.

5. Re-install the lid of the DVR and fasten screws.

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

19

3. RECORDER’S MENU

NDR-HA4208 and NDR-HA4416 digital multiplexers feature an multilingual OSD menu allowing for

adjusting the settings of the device.

The difference between 8– and 16-channel versions lies in the number of channels and recording

speed.

Prior to using DVR for the first time, initial setup is strongly advised. This includes setting such pa-

rameters as time and date, language version, camera, audio, remote control, record mode, network and

password. Highlighting the icon visible in most of the menus/submenus and pressing b u t -

ton resets the parameters available on that screen to their default values.

NOTE: The Live Monitoring menu can be alternatively displayed by

moving the mouse pointer to the top of the screen.

There is no default password when logging in for the first time as

the admin user! Please leave the password field void and press

the button

Arrow buttons navigate through the menu.

To confirm selection, enter sub-menus and change values use

button .

Parameter changes are performed via arrow buttons.

A virtual keyboard is available whenever the need for entering names and titles arises. Use the arrow

keys to highlight the desired character and press button. The selected character appears in the title

bar and the cursor moves to the next position. Pressing toggles between the upper and lower case

letters, serves as the backspace, and deletes entered characters. Up to 31 characters including

spaces can be used for creating title.

RECORDERS MENU

Freeze

Sequence

Camera Menu

Alarm Reset

Panic

Setup

Search Mode

Login/Logout

NDR-HA4208 / NDR-HA4416 1.2 version - User’s manual

20

3.1. System menu

After pressing MENU button and entering user password the following screen appears:

System menu contains six sub-menus regarding the system settings.

3.1.1. Information

After choosing this sub-menu and pressing the following screen appears:

Highlight the Site box and press button. A virtual keyboard appears for entering a SITE name.

Highlight the box beside System ID and press button.

NOTE: The Unit ID number is used to identify the unit when it is connected to other DVRs through

the RS-485 port or when using remote control. You cannot set the same ID number for two or more

DVRs which are in the same RS-485 network. It is possible to have multiple DVRs with Unit ID 0 that

are in the same area as long as they are not part of an RS-485 network. In such case, all DVR’s will be

controlled at the same time when using the infrared remote control.

RECORDER’S MENU

Strona się ładuje...

Novus NDR-HA4208 Instrukcja obsługi

Novus NDR-HA4208 Instrukcja obsługi

w innych językach

Powiązane artykuły