Novus NDR-HA4104 Instrukcja obsługi

Kategoria
Cyfrowe rejestratory wideo (DVR)
Typ
Instrukcja obsługi
NDR-HA4104
U s e r s m a n u a l
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
2
1. FOREWORD INFORMATION
NDR-HA4104 recorder are designed especially for CCTV systems. A very efficient H.264
compression is utilised, guaranteeing detailed, high quality images recorded for a long period of time.
It also allows for flexible recording parameters adjustment depending on system requirements.
1.1. Main characteristics
Compatible with color (NTSC, PAL) and black-and-white (CCIR, EIA-170) Video Sources,
Auto detection for NTSC and PAL,
Multiple monitor connectors: 1 BNC Video Out, 1 VGA
Multiple search modes (Date/Time, Calendar, Event),
System menu displayed on the screen (OSD menu),
Up to 100 images per second recording speed ,
Hard drive overwrite function,
2 USB 2.0 ports,
Simultaneous recording, playback, live monitoring and network connection,
User-friendly graphic interface,
4-Channel Audio Recording ,
Speaker output,
Built-in text input for ATM and POS,
Alarm Connections Include: Input, Output and Reset Input
Remote access to Live Monitoring Feature, recordings, menu settings, system diagnostics and
camera control via TCP/IP network or modem connection,
Embedded Web Server ,
Server/recorder time check,
Self-diagnostics with automatic notification,
Infrared remote control,
Advanced system of user privileges and access rights,
H.264 compression with image quality parameter configuration,
RS-485 port for remote control via NV-KBD70 system keyboard ,
Ability to copy files onto the USB,
The list of recommended disk models and their capacity is available on Novus Security website in the
Compatible Disks and DVD file in the product tab
FOREWORD INFORMATION
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
3
1.2. RECORDER’S TECHNICAL DATA
Model
NDR-HA4104
Operation Mode
QUADRUPLEX
Operating System
Linux
Video Input
4 x BNC,
Video Output
Main Monitor (1 x BNC, 1 x VGA)
Alarm Input
4
Alarm Output
2 relays
Audio Input/Output
2 x RCA / 1 x RCA
Recording Speed
100 fps (360x 288), 50 fps (720 x 288), 25 fps (720x576),
Compression
H.264 - own algorithm
Recording Resolution
720x 576,720 x 288, 360 x 288
Recording Mode
Time-lapse, Event (Alarm, Motion detection and/or Text-in)
Display Speed
100 fps (real-time)
Display Screen
Full screen, 2, sequence, freeze image function, digital zoom of a chosen screen area: 2x
Motion Detection
768 detection windows (24x32 grid) with sensitivity & active areas cells number needed for alarm
activation defined individually for each channel
Video Loss Detection
Yes
Schedule Recording
Individually adjustable for each day/specific days (holidays etc.) per camera, combination
of individual recording modes possibility
Recorded Data Search
By date/time or events (motion, disappeared object, Text-in)
Event History Log
Up to 5 000 system events and unlimited alarm events
Time Synchronization
Automatic time synchronization with NTP server
System Diagnostic
Automatic control of HDD bad sectors number (“Health”) & temperature status with local and network
Storage
1 HDD
Backup
USB Flash Memory through USB port, through the network
DVD-RW Drive
Not supported
External Ports
1 x Ethernet - RJ-45 interface, 10/100 Mbit/s, 2 x USB 2.0 for external drives (PC mouse, Flash Memory),
1 x RS-485 for PTZ cameras or NV-KBD70, NV-KBD60 & NV-KBD30 keyboards,
1 x RS-232 for POS, ATM, AC etc.
PTZ Functions
PTZ cameras control directly from the device and through the network (RASplus, IE)
Protocol
Novus-C, Novus-C1, Pelco-D and others
Control
Front panel, Network (RASplus, IE), NV-KBD70,NV-KBD60, NV-KBD30 keyboards, USB PC mouse,
Remote Control
Set-up
Multi-lingual On Screen Display (OSD)
Software
RASplus
User Authorization
Creation of user groups and accounts with diverse grants, password protection
Auto System Recovery
Hardware WATCHDOG function
Power Supply
100~240 VAC
Power Consumption
Max. 25 W (with HDD)
Operating Temperature
C ~ 40°C
Relative Humidity
0% ~ 80% (non-condensing)
Dimensions (mm)
265 (W) x 52 (H) x 288 (D)
Weight
1.7 kg (without HDD)
FOREWORD INFORMATION
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
4
EMC (2004/108/EC) and LVD (2006/95/EC ) Directives
CE Marking
Our products are manufactured to comply with requirements of following directives and national
regulations implementing the directives:
Electromagnetic compatibility EMC 2004/108/EC.
Low voltage LVD 2006/95/EC with further amendment. The Directive applies to electrical
equipment designed for use with a voltage rating of between 50VAC and 1000VAC as well
as 75VDC and 1500VDC.
WEEE Directive 2002/96/EC
Information on Disposal for Users of Waste Electrical and Electronic Equipment
This appliance is marked according to the European Directive on Waste Electrical and Electronic
Equipment (2002/96/EC) and further amendments. By ensuring this product is disposed of correctly,
you will help to prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or the documents accompanying the product, indicates that this appliance
may not be treated as household waste. It shall be handed over to the applicable collection point for the
waste electrical and electronic equipment for recycling purpose. For more information about recycling
of this product, please contact your local authorities, your household waste disposal service or the shop
where you purchased the product.
RoHS Directive 2002/95/EC
Concerning for human health protection and friendly environment, we assure that our products falling
under RoHS Directive regulations, regarding the restriction of the use of hazardous substances in
electrical and electronic equipment, were designed and manufactured in compliance with mentioned
regulation. Simultaneously, we claim that our products were tested and do not contain hazardous
substances exceeding limits which could have negative impact on human health or natural
environment.
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed
for self installation in households by individuals without technical knowledge.
COMMENTS AND WARNINGS
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
5
SAFETY REQUIREMENTS
ATTENTION!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE GIVEN
PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE
PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT, ITS
MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE
MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED.
1. The installation of NDR-HA4208, NDR-HA4416 should be made by a qualified service person or a
professional safety system installer.
2. Recorders mustn’t be placed in places where ventilating holes are partially or fully covered.
3. User’s interference inside the device is not allowed and is unnecessary as it does not have any
systems which require adjusting or which are suitable for self-repair. You mustn’t dismantle the
recorder or remove any single fastening screws. If any repairs are necessary contact the service.
The device must be take care of and protected against any mechanical damage.
4. The recorder has to be protected against humidity and dust. In case the recorder had a contact with
water react immediately: switch off the power supply and contact the authorised Novus service. If
the device gets dirty it might get damaged or electrocute someone.
5. The device can only be cleaned with a damp cloth after the power supply has been switched off.
Avoid strong detergents (liquids and sprays). Mild detergents can be used if the recorder becomes
very dirty.
6. Power supply unit cords and signal cords should be laid in a way that eliminates the risk of
mechanical damage; special attention should be paid to the plug. Be careful not to overload sockets
and extension cords so that there is no fire.
7. To avoid recorder’s damage vision and control signals should be equipped with systems protecting
against disturbances, over voltage and atmospheric discharge that are in compliance with Polish
regulations. It is also advised to use ground loop isolators.
8. The device mustn’t be used in conditions which do not fulfil operating requirements as far as power
supply, relative humidity or air temperature are concerned.
9. You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a
metal object gets inside the device contact the authorised Novus service immediately.
10. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other
media occurred during the usage of the product.
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
6
1. FOREWORD INFORMATION ............................................................................................. ..6
1.1 Main Characteristics ............................................................................................................ 6
1.2 Recorder’s technical data ................................................................................................. ...7
2. STARTING THE DEVICE ....................................................................................................... 8
2.1 Getting ready to work ........................................................................................................ 8
2.2 Electrical connection and other rear panel components .................................................... 9
2.3 Connecting peripherals .................................................................................................. 11
2.4 Front panel description ................................................................................................... 12
2.5 Remote controller ........................................................................................................... 14
2.6 HDD Installation ............................................................................................................ 14
3. RECORDER’S MENU ............................................................................................................ 17
3.1 System Menu .................................................................................................................. 18
3.1.1 Information ............................................................................................................. 18
3.1.1.1 System log ................................................................................................... 19
3.1.1.2 Recording range .......................................................................................... 20
3.1.2 Date /time ............................................................................................................... 20
3.1.3 Disks ....................................................................................................................... 21
3.1.4 Users ....................................................................................................................... 24
3.1.5 System shutdown .................................................................................................... 26
3.1.6 User logout ............................................................................................................ 26
3.2 Network ........................................................................................................................... 27
3.2.1.1 Network ....................................................................................................... 28
3.2.1.2 LAN ............................................................................................................ 29
3.2.1.3 DVRNS, RTSP ............................................................................................ 29
3.2.1.4 WebGuard ................................................................................................... 31
3.2.2 Notifying ................................................................................................................ 30
3.2.2.1 E-mail .......................................................................................................... 30
3.2.2.2 Call-back .................................................................................................... 30
3.3 Devices .......................................................................... ........................................... .......31
3.3.1 Cameras .................................................................................................................. 31
3.3.2 Audio ...................................................................................................................... 33
3.3.3 Alarm-out ............................................................................................................... 33
3.3.4 Display .................................................................................................................... 35
3.3.5 Remote control ....................................................................................................... 37
3.4 Recording ......................................................................................................................... 38
3.4.1.Record .................................................................................................................... 38
3.4.2 Schedule ................................................................................................................. 40
3.4.3. Pre-event ............................................................................................................... 41
3.5 Event ................................................................................................................................ 42
3.5.1. Alarm-in ................................................................................................................ 42
3.5.2. Motion detection ................................................................................................... 44
3.5.3. Video loss…………………………………………………………………………45
3.5.4. Video blind ............................................................................................................ 46
3.5.5. System event ......................................................................................................... 46
4. RECORDER’S OPERATION ............................................................................................... 48
4.1 Live monitoring, freeze ................................................................................................... 48
4.2 ZOOM mode .................................................................................................................... 48
4.3 PTZ mode ........................................................................................................................ 48
4.4 Image adjustment ............................................................................................................ 49
4.5 Event monitoring ............................................................................................................. 50
TABLE OF CONTENT
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
7
4.6 Covert cameras ................................................................................................................ 50
4.7 Recording video............................................................................................................... 51
4.8 Recording audio............................................................................................................... 51
4.9 Playing recorded video .................................................................................................... 51
4.10 Searching video ............................................................................................................. 52
4.10.1 Event log search .................................................................................................... 52
4.10.2 Motion search ........................................................................................................ 55
4.10.3 Go to ...................................................................................................................... 56
4.11 Record table search ........................................................................................................ 57
4.12 Clip copy........................................................................................................................ 58
4.13 Playback......................................................................................................................... 60
5. PTZ CAMERAS CONTROL AND CONNECTION ............................................................... 62
6. CONNECTING DEVICES TO ALARM INPUTS AND OUTPUTS ....................................... 65
7. RECORDER’S OPERATING FROM NV-KBD60 SYTEM KEYBOARD ............................ 66
8. DISPLAYING TEXT ON THE IMAGE ................................................................................... 67
8.1 DISPLAYING TEXT ON THE IMAGE ......................................................................... 67
8.2 TRANSACTION SEARCH............................................................................................. 70
9. SYSTEM STATUS .................................................................................................................. 72
10. USING A MOUSE .................................................................................................................. 73
TABLE OF CONTENT
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
8
Unpack the device carefully.
After unpacking please ensure that package contains the following items:
Power Supply
100-240VAC / 12VDC
If any of the items have been damaged during transport, please pack them back into the original
packaging and contact your supplier.
ATTENTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it from a
location with lower ambient temperature is forbidden, as the condensing water vapour may cause short-
circuits and damage the device as a result.
Note: Please get familiarized with description and functions of rear panel inputs.
2. STARTING THE DEVICE
2.1. Getting ready to work
NDR-HA4104 recorder.
Power cord.
CD with a user’s manual and
network software. User’s manual and network
software guide
STARTING THE DEVICE
Remote controller
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
9
2.2. Electrical connectors and other rear panel components
NDR-HA4104 rear view
1. VIDEO IN video inputs for connecting video signal sources with the DVR.
2. AUDIO IN 4 audio mono inputs (RCA type) for connecting microphones.
Note: sound recording may be conducted only when law regulations of
a given country allow for such activities.
Audio inputs are not equipped with pre-amplifiers, so connecting the
microphones directly to the inputs is not advised. Usage of preamplifiers is
recommended.
AUDIO OUT Audio output for connecting speaker and amplifier. Connecting the speaker
directly to the outputs is not advised. Usage of pre-amplifier is
recommended.
3. RESET
4. VIDEO OUT, VGA Main monitor connectors, BNC or VGA type. VGA output allows for
connecting the main monitor in the computer mode. Please use signal
cord provided with the monitor when using said connection type.
5. NETWORK RJ-45 connector for connecting the DVR to the computer network in
10/100Mb/s standard.
6. ALARM INPUTS 16 or 8 (depending on a model) alarm inputs, which may be set either as
normal open (N.O.) or normal closed (N.C.). In order to detect the alarm
signal it should last 0.5sec at least. All GND connectors are common
grounded. The ground of the alarm device needs to be connected to one of
the GND connectors.
ALARM OUTPUTS The DVR is capable of activating external devices such as buzzers, halide
lamps, sirens etc. via its relay outputs. Max current for the output is 1A for
30VDC and 0.5 A for 125VAC.
STARTING THE DEVICE
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
10
NDR-HA4104 rear view
STARTING THE DEVICE
7. RS-485 The DVR can be controlled remotely by an external device or control
system, such as a control keyboard (NV-KBD30, NV-KBD70), using
RS485 half-duplex serial communications signals. The RS485 connector
can also be used to control PTZ (pan, tilt, zoom) cameras or text-in devices.
Connect RX+/TX+ and RX-/ TX- of the control system to the + and –
connectors of the DVR respectively.
8. RS-232 PORT Allows to connect modems for remote video preview, connecting external
keyboards (optional) or devices generating the ASCII codes that provide
additional information (cash registers, ATMs). Only one of the devices may
be connected at once. If transmission standard of connected d e v i c e i s
different than RS-232, you need to use additional device (e.g. such as
NVRS-001RSC) to change standard transmission from RS-485 to
RS-232.
Attention: Cable for connecting to RS-232 port is not included in the set. Please make sure that the
cable possessed is appropriate. (DB9S female connector).
9. POWER CONNECTOR
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
11
2.3. Connecting peripherals
System connection should be performed only by qualified personnel. Please familiarize yourself with
the scheme located below, depicting possible implementation of the DVR in the system, before
installation.
Depending on requirements, each system will have different number of peripherals connected.
Monitors, cameras etc. should be purchased separately, depending on current needs. Detailed
description of peripheral connections can be found in the following chapters of this manual.
STARTING THE DEVICE
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
12
2.4. Front panel description
NDR-HA4104 View
STARTING THE DEVICE
NOTE: a mouse with USB interface can be used for recorder’s control and setting. All the details can
be found in the following chapters of the manual.
1. CAMERA BUTTONS Pressing individual camera buttons will cause the selected
camera to display full screen, and pressing the button again
toggles between different display formats. Buttons 1 to 4 are also
used to enter passwords. In the PTZ mode, pressing the button 1
zooms in the screen and the button 2 zooms out the screen, and
pressing the button 3 focuses near and button 4 focuses far.
2. HDD LED Flashing LED indicates that the HDD is either in recording or
playback mode.
3. ALARM LED Solid light when alarm has been triggered and / or internal
buzzer is active.
4. ARROW BUTTONS These buttons are used to navigate through menus and GUI. You
can also use them to change numbers by highlighting a number in
the menu and using the Up and Down arrow buttons to increase or
decrease the number’s value.
Used for navigating through OSD menu, and changing parameter
values with and buttons. In PTZ mode navigation buttons
are used for speed dome cameras control.
In DISPLAY mode pressing fast playback butons
buttons speeds up the playback, with the speed indicated by
icons visible on the screen.
press or in PAUSE mode to watch picture frame by frame.
5. PLAY / PAUSE Press the PLAY/PAUSE button to play stored images at
normal speed. Pressing the button in the P l a y b a c k
mode pauses the video.
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
13
6. MENU Press MENU button to enter the DVR menu.
Pressing and holding MENU button for 2 seconds while in screen
division display mode starts sequence display.
7. PTZ/ZOOM BUTTON Pressing the PTZ/ZOOM button in live monitoring mode
enters the zoom mode, and pressing it again exits the zoom mode.
When in said mode, a rectangle displays on the screen. A
rectangle shows the area that will be enlarged. You can move the
rectangle around using the arrow buttons. Pressing the
(Play/ Pause) button enlarges the area in rectangle.
In live monitoring mode, pressing and holding the PTZ/ Z O O M
button for three seconds or longer enters the PTZ mode while
pressing and holding the button again for three seconds or
longer exits the PTZ mode. When in the PTZ mode, pressing the
arrow buttons or MENU button allows you to control properly
configured cameras.
8. PANIC Pressing the PANIC button starts panic recoding of all camera
channels, and displays them on the screen. Pressing the button
again stops panic recording.
9. SEARCH Pressing the SEARCH button enters search mode, and pressing
it again exits the search mode. When entering the search m o d e ,
video is paused. Pressing the (Play/Pause) button plays back
video at regular speed. The screen displays when the DVR is in
the Pause mode and when the DVR is playing a video. The
button is also used to load a Preset View in the PTZ mode.
10. USB A USB port on the front panel is provided to connect external hard
disk or flash drives for video clip copying or system upgrades.
Position external drives close enough to the DVR so that you can
make the cable connections, usually less than 6 feet. Use the USB
cable provided with the HDD to connect it to the DVR. A
USB mouse (not supplied) can be connected to the USB port. You
can use the mouse to navigate through the screens and menus much
like you would on a computer. A USB to Serial converter can be
connected to the USB port. Multiple text-in devices can be used
with a USB to Serial converter.
STARTING THE DEVICE
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
14
Remote Controller
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
2.5 HDD installation
DVR NDR-HA4104 supports 1 HDD.
NOTE: To obtain the latest info on compatible disks together with their maximum supported
capacities please contact your supplier or visit the www.novuscctv.com website.
NOTE: HDDs previously used in other devices need to be formatted. Please keep that in
mind due to the possibility of important data loss.
ATTENTION: The list of compatible HDDs contains all the HDDs that are compatible with a
given DVR including HDDs designed to office use (desktop disks). However, due
to the fact that reliability of the recording process and data safety are most
important factors of any CCTV system, we strongly advise to use HDDs
designed for continuous (24/7) operation.
TURNING ON THE POWER
After connecting the power cord to the DVR system initialization takes approximately 60
seconds.
STARTING THE DEVICE
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
15
Before installing a hard drive (HDD), please make sure the DVR is unplugged.
To install an HDD in your DVR :
1. Remove the lid of the DVR by unfastening the
screws.
2. Install HDD in the HDD rack using the provided screws. Connect power and SATA cables to the
HDD.
STARTING THE DEVICE
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
16
STARTING THE DEVICE
4. Connect HDD to the motherboard of the DVR using included SATA cables.
5. Put the lid back on the DVR casing and fasten screws.
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
17
3. RECORDER’S MENU
NDR-HA4104 digital multiplexer features a multilingual OSD menu allowing to adjust
settings of the device. Prior to using DVR for the first time, initial setup is strongly advised. This
includes setting such parameters as time and date, language version, camera, audio, remote control,
record mode, network and password. Highlighting the icon visible in most of the menus/submenus
and pressing the button resets the parameters available on that screen to their default values.
NOTE: Live Monitoring menu can be alternatively displayed by moving the mouse pointer to the top
of the screen.
There is no default password when logging in for the first time as
the admin user! Please leave the password field void and press the
button
Arrow buttons navigate through the menu.
To confirm selection, enter sub-menus and change values use the
button .
Parameter adjustment is performed via arrow buttons.
A virtual keyboard is available whenever the need for entering names
and titles arises. Use the arrow keys to highlight the desired character
and press the button. The selected character appears in the title bar
and the cursor moves to the next position. Pressing toggles between the upper and lower case let-
ters, serves as the backspace, and deletes entered characters. Up to 31 characters including
spaces can be used for creating title.
RECORDERS MENU
Freeze
Sequence
Camera Menu
Alarm Reset
Panic
Setup
Search Mode
Login/Logout
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
18
3.1. System menu
After pressing MENU button and entering user password the following screen appears:
System menu contains six sub-menus regarding the system settings.
3.1.1. Information
After choosing this sub-menu and pressing the following screen appears:
Highlight the Site box and press button. A virtual keyboard appears for entering a SITE name.
Highlight the box beside System ID and press button.
NOTE: The Unit ID number is used to identify the unit when it is connected to other DVRs through
the RS-485 port or when using remote control. You cannot set the same ID number for two or more
DVRs which are in the same RS-485 network. It is possible to have multiple DVRs with Unit ID 0 that
are in the same area as long as they are not part of an RS-485 network. In such case, all DVR’s will be
controlled at the same time when using the infrared remote control.
RECORDER’S MENU
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
19
Highlight the box next to Language text and press button. Available languages should be displayed
in the drop-down list. Highlight the desired language and press button.
To upgrade the software, connect a USB device with upgrade package file to the DVR. Highlight
Upgrade… and press button. The Upgrade screen should appear displaying the upgrade package file
names that are available. The “.rui” indicates that file contains upgrade package. Highlight the Install
button and press button to install selected software package. Highlight Cancel button and press
button to close the window without upgrading. If the upgrade package file is not installed properly,
you will get an error message. The system restarts automatically after completing upgrade.
NOTE: The Upgrade button will be deactivated if hard disk drive has not been formatted - as it
requires the space for temporary files when upgrading the system.
CAUTION: The USB device must be FAT16 or FAT32 formatted.
Use Import/Export buttons to import or export system settings.
3.1.1.1. System log
Highlight Show System Logand press
button to display the System Log
The System Log screen lists system activities (up to 5,000 starting from most recent) that have
occurred, along with their appropriate time and dates. The icon will be displayed in the last column
for system activities of the remote site. Scroll through the log pages using Up and Down arrows.
Alternatively, going directly to desired log page by entering the log page number in the box at the
bottom left of the screen is also possible. EXPORT button allows for exporting all logs to text file.
Highlight Close and press button to exit the screen.
RECORDER’S MENU
NDR-HA4104 1.0 version - User’s manual
All rights reserved ©
AAT Holding sp. z o.o.
20
RECORDER’S MENU
3.1.1.2. Recorded data
RECORDED DATA field informs about time frame in which the recordings were made.
Selecting and confirming CLEAR ALL DATA field deletes all recordings currently stored on the HDD.
Prior to deletion, user will be informed about irrecoverable data loss. Deletion of recordings doesn’t
remove entries from system log, therefore entries with no associated video may occur.
3.1.2. Date / time
Highlight Date/Time in the System menu and press button. The Date/Time setup screen appears.
This submenu is responsible for adjusting the date and time using navigation and ENTER buttons.
Please select appropriate date/time format, adjust time settings and select time zone the DVR will work
in.
NOTE: Changes are applied at the moment of pressing SAVE button.
To automatically update time settings according to DST change, please check the USE
DAYLIGHT SAVING TIME option.
Highlight the Holiday tab, and the Holiday setup screen appears.
HOLIDAY tab allows to define special days, e.g. holidays, when the DVR operates in a specially
defined mode, other than the default one. Days described as holidays may be used in creating record
schedule.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152

Novus NDR-HA4104 Instrukcja obsługi

Kategoria
Cyfrowe rejestratory wideo (DVR)
Typ
Instrukcja obsługi

w innych językach