AAT NVIP-2VE-6201-II Instrukcja obsługi

U s e r ’s m a n u a l

NVIP-3000 series IP camera

NVIP-3000 series IP camera user’s manual

2

TABLE OF CONTENTS

TABLE OF CONTENTS ..................................................................................................... 2

1. START-UP AND INITIAL IP CAMERA CONFIGURATION ................................. 4

1.1. Overview ............................................................................................................. 4

1.2. Starting the IP camera .......................................................................................... 4

1.3. Initial configuration via the web browser ............................................................ 5

2. NETWORK CONNECTION UTILIZING WEB BROSWER .................................. 6

2.1. Recommended PC specification for web browser ............................................... 6

2.2. Connection with IP camera via web browser ....................................................... 6

3. USING AND CONFIGURING ....................................................................................... 8

3.1. Remote Preview Interface. ................................................................................... 8

3.2. . ............................................................................................................................. 9

4. RECORDS. ....................................................................................................................... 9

5. SETTINGS. ..................................................................................................................... 11

5.1 System ................................................................................................................ 11

5.1.1 Basic Information ....................................................................................... 11

5.1.2 Date and Time ............................................................................................ 12

5.1.3 Local Config .............................................................................................. 13

5.1.4 Storage ....................................................................................................... 13

5.2. Image .................................................................................................................. 14

5.2.1 Display Settings ......................................................................................... 14

5.2.2 Vide/Audio ................................................................................................. 15

5.2.3 OSD ............................................................................................................ 16

5.2.4 Video Mask ................................................................................................ 17

5.2.5 ROI ............................................................................................................. 17

5.2.6 Zoom/Focus ............................................................................................... 18

5.3 PTZ ..................................................................................................................... 19

5.4.Alarm .................................................................................................................... 20

5.4.1 Motion Detection ....................................................................................... 20

5.4.2 Alarm In ..................................................................................................... 22

5.4.3 Alarm Out .................................................................................................. 23

5.5 Events ................................................................................................................. 24

5.5.1 Object Removal .......................................................................................... 24

5.5.2 Exception ................................................................................................... 25

NVIP-3000 series IP camera user’s manual

3

5.5.3Line Crossing .............................................................................................. 26

5.5.4 Intrusion. .................................................................................................... 27

5.6 Network ................................................................................................................ 28

5.6.1 TCP/IP ....................................................................................................... 28

5.6.2 IPv6 ............................................................................................................ 28

5.6.3 PPPoE Config ............................................................................................ 28

5.6.4 IP Change Notificaton Config ................................................................... 24

5.6.5 Port ............................................................................................................. 28

5.6.6 DDNS ........................................................................................................ 29

5.6.7 SNMP ......................................................................................................... 29

5.6.8 RTSP .......................................................................................................... 29

5.6.9 UPnP .......................................................................................................... 30

5.6.10 Email. ........................................................................................................ 30

5.6.11 FTP ........................................................................................................... 31

5.7. Security .............................................................................................................. 32

5.7.1 User ............................................................................................................ 32

5.7.2 Online User ................................................................................................. 32

5.7.3 Block and Allow Lists ................................................................................ 32

5.8. Maintenance ....................................................................................................... 33

5.8.1 Backup and Restore .................................................................................... 33

5.8.2 Reboot ......................................................................................................... 33

5.8.3 Upgrade ...................................................................................................... 33

5.8.3 Operation Log ............................................................................................. 33

6. RESTORE TO DEFAULT ........................................................................................... 34

TABLE OF CONTENTS

NVIP-3000 series IP camera user’s manual

4

START-UP AND INITIAL CAMERA CONFIGURATION

1. START-UP AND INITIAL IP CAMERA CONFIGURATION

1.1. Overview

Following manual for IP Cameras NVIP-3000 series contains detailed information about camera

connection and operation, main page introduction, system related settings and camera settings.

Note

In this document you can find all available functionality. Depending on camera model some features

might be unavailable.

1.2. Starting the IP camera

To run NOVUS IP camera you have to connect ethernet cable between camera and network switch.

To power it up you can connect it directly via power supply adapter with parameters compatible with

camera power supply specification, or camera can be powered with PoE/PoE+ (IEEE 802.3af/802.3at)

compatible switch.

After connecting power supply green LED should light on. Initialization process is then started which

takes about 30 seconds. You can then proceed to connect to the camera via web browser.

If the connection is successfully established orange LED blinks with a frequency proportional to the

quantity of data sent. Connecting via web browser is then possible. If connection isn’t established (the

network cable is disconnected) green and orange LEDs aren't active, solid light means that network

connection is ok but camera doesn't receive or send any data, with possible PC network settings error.

The recommended way to start an IP camera and perform its configuration is a connection directly

to the network switch which is not connected to other devices. To obtain further information about

network configuration parameters (IP address, gateway, network mask, etc.) please contact your

network administrator.

• Connection utilising network switch with PoE/PoE+ support

Computer

IP Camera

Network Switch PoE/PoE+

Network transmission

Power supply and

NVIP-3000 series IP camera user’s manual

5

START-UP AND INITIAL CAMERA CONFIGURATION

• Connection utilising external power supply and network switch

• Connection utilising external power supply directly to the computer

1.3. Initial configuration via the web browser

The default network settings for IP camera NVIP-7000 series are:

1. IP address= 192.168.1.200

2. Network mask - 255.255.255.0

3. Gateway - 192.168.1.1

4. User name - root

5. Password - pass

Knowing the camera’s IP address you need to appropriately set PC IP address, so the two devices can

operate in one network subnet ( e.g. for IP 192.168.1.1, appropriate address for the camera ranges from

192.168.1.2 to 192.168.1.254, for example 192.168.1.60). It is not allowed to set the same addresses for

camera and PC computer

You can either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera

yourself or select DHCP mode (DHCP server is required in this method in target network) by using

web browser or by NMS software. When you use DHCP server check IP address lease and its linking

with camera MAC address to avoid changing or losing IP address during device operation or network/

DHCP server breakdown. You have to remember to use a new camera IP address after changing

network parameters.

After network setting configuration has been done, the camera can be connected to a target network.

Network transmission - cross over cable

IP Camera

Computer

IP Camera

Network transmission

Network Switch

Computer

Network transmission

NVIP-3000 series IP camera user’s manual

6

2. NETWORK CONNECTION UTILIZING WEB BROSWER

2.1. Recommended PC specification for web browser connections

Requirements below apply to connection with an IP camera, assuming smooth image display

in 1920x1080 resolution and 25 fps speed.

1. CPU Intel Core i3 3 GHz or newer

2. RAM Memory min. 4 GB

3. Graphic card NVIDIA GeForce 512 MB or equivalent

4. OS Windows 7 / 8 / 8.1 / 10

5. Network card 10/100/1000 Mb/s

2.2. Connection with IP camera via web browser

You have to enter camera IP address in the address bar. When you connect to the camera, web browser

will download the applet for displaying images from the camera. In Internet Explorer it may be

necessary to accept an ActiveX control. To do this, click the right mouse button on the message, select

"Install Active X control" and then click Install. After successfully NetIPCamera plug in downloading

run and install it on a computer.

NETWORK CONNECTION UTILIZING WEB BROWSER

NVIP-3000 series IP camera user’s manual

7

If the installation fails, changing security settings for the IE browser is required. In order to do that,

please choose: Tools > Internet options > Security tab > Custom level and:

• Under Download unsigned ActiveX controls - select either Enable or Prompt

• Under Initialize and script ActiveX controls not marked as safe - select Enable or Prompt

You can also add the camera’s IP address to “trusted zone” and set lowest security level for it.

In addition, when working in Windows / 7 / 8 / 8.1 / 10 the ActiveX applet may be blocked by

Windows Defender or User account control. In such case you should allow to run this applet, or simply

disable these functions.

After successful installation login window will be displayed. Default user is root and default password

is pass. For safety reasons, it is recommended to change default user name and password.

WARNING !!! If user forgets login and/or password for IP Camera, it is required to sent

IP Camera back to supplier. In this case, it is not possible for user to restore IP Camera factory

defaults on his own.

NETWORK CONNECTION UTILIZING WEB BROWSER

NVIP-3000 series IP camera user’s manual

8

3. USING AND CONFIGURING

3.1 The Remote Preview Interface

1. View settings

Original size Automatic Size

Fill screen Full Screen

2. Camera functions

Live View On/Off Take a snapshoot Zoom In/out

On/Off Sound Record Video

PTZ panel – unavailable

3. Motion detection

Motion detection Sensor1 Color change Clarity change Scene change

4. Camera buffer

There is three possible options of view: REAL-TIME, BALANCED, FLUENT

USING AND CONFIGURING

Focus, Zoom settings

NVIP-3000 series IP camera user’s manual

9

3.2 Focus and Zoom Settings

Camera got build in panel that allow user to set Zoom and Focus Value

Zoom Out

Zoom In

Focus Out

Focus In

One key focus

Auto Zoom Menu On/Off

4. RECORDS

1. Switch between Pictures and Recorded Videos

2. Choose between pictures/videos in local storage or saved on SD card (selected models). At calen-

dar user can see witch day got any records (red color).

USING AND CONFIGURING

1

2

3

4

5

NVIP-3000 series IP camera user’s manual

10

3. Available videos - list of videos that available for user

4. View - records and number of preview that can be search by user

5. Preview or records:

- Play

- Pause

- Stop

- Forward/Rev.

- Next/Previous

- Watermark/Save video to desktop

- On/Off Audio, sound regulation

Picture search panel

Off preview

Close all

previews

USING AND CONFIGURING

Fit to window

Orginal size

Zoom in/out

Start/Stop

Intervals

Save file

Save all

files

NVIP-3000 series IP camera user’s manual

11

5. SETTINGS

Notice: menu may looks different depends of camera model!

5.1 System

5.1.1 Basic Information

Menu with basic information about camera.

Device Type, Brand, Software Version,

Software Build Date, Kernel Version,

Hardware Version, OCX Version, MAC

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

12

USING AND CONFIGURING

5.1.2 Date & Time

Zone

In Zone tab user, can choose actual Time Zone and turn on or off DST function.

Date and Time

Tab got three possible options:

Synchronize with NTP server - camera synchronizes time with set NTP server once per day.

Synchronize with computer time - camera synchronizes time with client PC

Set Manually - user manually set date and time for camera.

NVIP-3000 series IP camera user’s manual

13

5.1.3 Local config

In this tab, user configure default picture and record path in client PC. Also can turn off/on audio

settings.

5.1.4 Storage

SD Card

Camera SD card shows user current Capac-

ity of card, Used Capacity and Remain-

ing Capacity. Current State of card that

shows any abnormal card state.

Record

Tab allow user to choose witch stream will be used

for SD card records. There is also available option

to enable pre records which can be set on 3 or 6

seconds.

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

14

5.2 IMAGE

5.2.1 Display Settings

Brigtness - sets current brightness of camera from value 0 to 100, default value 25

Contrast - defines a contrast value between 0 and 100, default value is 50

Hue - defines depth of color and allow to set it value from 0 to 100, default value is 50

Saturation - defines saturation value between 0 and 100, default value is 50

Sharpness - turns digital sharpness option on/off and set its value between 0 to 255

Noise Reduction - digital noise reduction, option that improves quality of image by setting it value

between 0 and 255.

Defog - option that improves quality of image during foggy day.

Backlight Compensation - option that allows to turn on/off advanced exposure setting such as

HWDR, BLC and HLC. In case of HWDR, there are three possible options LOW, MID, HIGH.

Antiflicker - function that prevents flickering in artificial lighting depends on power frequency (50,

60Hz)

White Balance - allows to choose white balance from three possible options: INDOOR, OUT-

DOOR, MANUAL.

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

15

Frequency - switches camera between 50Hz and 60Hz mode (change frequency will restart the de-

vice)

Day/Night mode - switches camera between Day/Night mode. Available options: Auto, Day,

Night, Schedule

Sensitivity - settings for camera day/night switching sensor, possible settings: HIGH, MID, LOW

Infra-red Mode - allows user to manual switch camera IR Illuminator, independently to current day

or night mode. Available options: AUTO, ON, OFF

Exposure Mode - after switch to manual mode user can define shutter value form 1/1 to 100000,

default 1/25

Corridor Pattern - rotates image by 90, 180 or 270 degrees.

Image Mirror - turns on mirror mode.

Image Flip - flips image horizontally

5.2.2 Video/Audio

Main stream - allows to chose resolution from available options (different depending on camera

model). Also define Frame Rate (fps) for current stream from 1 to 25 (or 30 in 60Hz). Each stream

can be configured separately.

VBR - variable bitrate, defines size of current stream, it will change based on set Video Quality

CBR - constant bitrate, constant value of stream dependent on chosen value of bitrate.

Bitrate - can be changed only in CBR mode and depends from camera model. Value of stream will

be changed depending on the option selected. Value can be set manual by user.

Video Quality - can be changed only in VBR mode. Can be selected from possible options: High-

est, Higher, Medium, Lower, Lowest. Value of bitrate will be changed depending on chosen op-

tion

I Frame Interval - defined value of base frame

Video Compression - video compression selection H.264/H.265 and MJPEG

Profile - chose available settings for current stream

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

16

Also in same tab there is a option to choose and configure snapshots. User chooses which of availa-

ble streams will be used to make snapshots.

Video encode slice split - option not available

Watermark - option not available

Audio

Audio tab allow user to change default audio

codec. Option to switch between build in mi-

crophone (MIC) and line in connector. (on se-

lected models)

5.2.3 OSD

Camera got option to display information on screen in live preview.

Date Format - change available options for date format (YYYY/MM/DD, MM/DD/YYYY, DD/

MM/YYYY)

Device name - displays name of the device

OSD Content - additional place for extra information about camera

Each of chosen information can be displayed in different place on the screen.

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

17

USING AND CONFIGURING

5.2.4 Video Mask

Camera got 4 defined video mask. To set them

user need to chose option Draw Area and then

draw which area need to be hide on live pre-

view. To turn selected zones on, check option

Enable and then click Save button. To clear

all drawn zones click Clear button.

5.2.5 ROI

ROI zones allows user to focus on specific area of the screen. Those zones selected by user are in

much better quality then rest of the screen.

User can set up to 3 ROI zones. To draw zone user need to click DRAW AREA button and then

chose draw zone on the preview screen. After select OPEN and pres button SAVE zones is as-

signed to the live preview. Using slider user can choose LEVEL of quality for ROI zones.

NVIP-3000 series IP camera user’s manual

18

5.2.6 Lens control (selected models)

Chosen models of NOVUS IP 3000 series cameras got build in motor-zoom lens module. Additional

menu allows to control these lens.

Day and night switching focus - allow to automatic focus lens every time when camera switch form

day to night and night to day.

One Key Focus - instantly focusing on current view

Reset - camera reset lens position of lens to factory default.

Zoom– Zoom+ - manual camera zoom control

Focus-/Focus+ - manual camera focus control

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

19

5.3 PTZ (selected models)

5.3.1 Protocol

Chosen cameras got active RS-485 connector. It allow to control PT unit. To proper configure RS-

485 user need to chose witch protocol will be used (PELCOD, PELCOP), give camera address (1-

255) and chose one of defined baud rate (110-115200).

USING AND CONFIGURING

NVIP-3000 series IP camera user’s manual

20

USING AND CONFIGURING

5.4 Alarm

5.4.1 Motion Detection

Alarm Config

To turn alarm on, user needs to select ENABLE

ALARM option. After that he define time of alarm

(from 5 seconds to 2 minutes). Trigger rerecord and

snapshot on SD card. He can also use TRIGGER E-

MAIL option to send alarm pictures on specific ad-

dress e-mail, (configuration of e-mail address look

page 23). In the same way user can configure camera

to send alarm pictures on FTP server (configuration

of FTP server look page 24).

(Alarm output, and SD card recording/snapshot avail-

able on selected models)

Area and Sensibility

For proper motion detection user needs to define zone for alarm. Using the slider user choose sensi-

tivity of camera depends of needs. To add areas user need to click DRAW button and then select ar-

ea on the preview. There is also a possibility to select SELECT ALL button or CLEAR ALL. Last

option is INVERT button who switch selected zones with non selected areas.

Strona jest ładowana ...

AAT NVIP-2VE-6201-II Instrukcja obsługi

AAT NVIP-2VE-6201-II Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty