Panasonic SCHC55EP Instrukcja obsługi

Kategoria
Domowe zestawy audio
Typ
Instrukcja obsługi
RQTX1265-1R
until
2011/02/28
POLSKIРУССКИЙУКРАЇНСЬКА ČESKY ENGLISH
EG
EP
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Please keep this manual for future reference.
Drogi Kliencie
Dziękujemy za zakupienie tego produktu.
Przed podłączeniem, obsługą lub regulacją sprzętu prosimy o
dokładne zapoznanie się z treścią niniejszej instrukcji. Prosimy o
zachowanie niniejszej instrukcji obsługi.
Vážený zákazníku
Děkujeme, že jste si zakoupil tento výrobek.
Dříve, než se pustíte do zapojování a začnete výrobek používat či
provádět nastavování, prostudujte si prosím celý tento návod.
Uschovejte si prosím tento návod k obsluze.
Included Installation Instructions (> 2, 6)
The installation should never be done by any other than a
qualified installation specialist.
Before commencing work, carefully read these installation
instructions and the operating instructions to ensure that installation
is performed correctly.
(Please keep these instructions. You may need them when
maintaining or moving this unit.)
Załączone instrukcje instalacji (> 20, 24)
Instalacja może być przeprowadzana wyłącznie przez
wykwalifikowanych specjalistów zajmujących się instalacją.
Przed rozpoczęciem pracy należy się dokładnie zapoznać z
instrukcją instalacji oraz z instrukcją obsługi, aby się upewnić, że
instalacja została przeprowadzona prawidłowo.
(Proszę zachować niniejszą instrukcję. Będzie ona potrzebna
podczas serwisowania lub przenoszenia urządzenia.)
Přiložené pokyny k instalaci (> 38, 42)
Instalaci by měl provést kvalifikovaný odborník.
Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a
návod k obsluze, abyste instalaci provedli opravdu správně.
(Tyto pokyny si uschovejte. Můžete je potřebovat při údržbě nebo
přesouvání tohoto zařízení.)
Operating Instructions
Instrukcja obsługi
Návod k obsluze
Инструкция по эксплуатации
Інструкція з експлуатації
Compact Stereo System
Kompaktowy zestaw stereo
Kompaktní stereo systém
Компактная стереосистема
Компактна Стереосистема
Model No. SC-HC55
SC-HC35
Уважаемый покупатель
Благодарим вас за покупку изделия нашей фирмы.
Прежде чем подключать, использовать или настраивать
настоящий аппарат, необходимо полностью ознакомится с
настоящей инструкцией. Инструкцию следует сохранить, она
может понадобиться в будущем.
Шановний покупець!
Дякуємо за купівлю цього продукту.
Перед підключенням, користуванням чи регулюванням апарату
уважно прочитайте усю інструкцію. Зберігайте інструкцію з
експлуатації для довідки у майбутньому.
Включенные инструкции по установке (> 56, 60)
Установочные работы производятся только
квалифицированным специалистом по установке.
Перед началом работы внимательно ознакомьтесь с данными
инструкциями по установке и эксплуатации для обеспечения
надлежащей установки устройства.
(Сохраните данные инструкции. Они могут понадобиться при
техническом обслуживании или перемещении данного
устройства.)
Інструкції з монтажу надаються в комплекті
(> 74, 78)
Монтаж має виконувати тільки кваліфікований фахівець із
монтажу.
Перед початком робіт уважно прочитайте інструкцію з монтажу
та інструкцію з експлуатації, щоб правильно виконати монтаж.
(Збережіть інструкцію. Вона може знадобитися під час
обслуговування або переміщення апарата.)
SC-HC55_35-RQTX1265.book 1 ページ 2011年3月27日 日曜日 午後7時32分
2
RQTX1265
Safety precautions
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service
personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the voltage printed
on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
Install this unit so that the AC mains lead can be unplugged from the socket
outlet immediately if any problem occurs.
Unit
This unit utilizes a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
Do not place sources of naked flames, such as lighted candles, on this unit.
This unit may receive radio interference caused by mobile telephones during
use. If such interference occurs, please increase separation between this unit
and the mobile telephone.
This unit is intended for use in moderate climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in another
confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Do not expose this unit to direct sunlight, high temperatures, high humidity,
and excessive vibration.
Batteries
Danger of explosion if battery is incorrectly replaced. Replace only with the
type recommended by the manufacturer.
Mishandling of batteries can cause electrolyte leakage and may cause a fire.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
Do not take apart or short circuit.
Do not recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a long
period of time. Store in a cool, dark place.
When disposing the batteries, please contact your local authorities or dealer
and ask for the correct method of disposal.
NORSK
Produkt
For å redusere faren for brann, elektrisk støt eller skade på apparatet:
Utsett ikke produktet for regn, fukt, drypping eller sprut.
Ikke plasser objekter som er fylt med væske, som vaser, på apparatet.
Bruk kun anbefalt tilbehør.
Fjern ikke deksler.
Reparer ikke denne enheten selv, overlat service til kvalifisert
servicepersonell.
Vekselstrømnett
Strømuttaket må befinne seg i nærheten slik at den lett kan kobles fra
uttaketumiddelbart om det oppstår problemer.
Produkt
Dette produktet anvender en laser. Betjening av kontroller eller justering eller
andre inngrep enn de beskrevet i denne bruksanvisning kan føre til farlig
bestråling.
Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
Dette apparatet er beregnet for bruk under moderate klimaforhold.
Plassering
For å redusere faren for brann, elektrisk støt eller skade på apparatet:
Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et annet
lukket sted. Pass på at produktet er godt ventilert.
Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, duker,
gardiner eller lignende.
SUOMI
Laite
Tulipalo-, sähköisku- tai vahinkovaaran välttämiseksi,
Älä anna tämän laitteen altistua sateelle, kosteudelle, pisaroille tai
roiskeille.
Älä laita laitteen päälle mitään nesteitä sisältäviä esineitä kuten maljakot.
Käytä ainoastaan suositeltuja varusteita.
Älä poista suojuksia.
Älä korjaa tätä laitetta itse. Anna huoltopalvelut tehtäväksi pätevälle
henkilöstölle.
Verkkokaapeli
Asenna tämä laite siten, että verkkokaapeli voidaan irrottaa pistorasiasta
välittömästi, jos ilmenee ongelmia.
Laite
Tämä tuote käyttää laseria. Laitteen käyttäminen muulla kuin näissä
käyttöohjeissa mainitulla tavalla saattaa altistaa käyttäjän vaaralliselle
säteilylle.
Älä laita avotulisia esineitä kuten kynttilöitä laitteen päälle.
Laite on tarkoitettu käytettäväksi leudoissa ilmastoissa.
Sijoitus
Tulipalo-, sähköisku- tai vahinkovaaran välttämiseksi,
Älä asenna tai sijoita tätä laitetta kirjahyllyyn, suljettuun kaappiin tai
muuhun rajalliseen tilaan. Varmista laitteen riittävä tuuletus.
Älä tuki laitteen tuuletusaukkoja lehdillä, pöytäliinalla, verhoilla tai
vastaavilla esineillä.
WARNING
CAUTION
ADVARSEL
FORSIKTIG
VAROITUS
VAARA
SC-HC55_35-RQTX1265.book 2 ページ 2011年3月27日 日曜日 午後7時32分
3
RQTX1265
ENGLISH
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone, respectively,
and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may affect
wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
The Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and
any use of such marks by Panasonic Corporation is under license. Other
trademarks and trade names are those of their respective owners.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Product Identification Marking is located on bottom of the unit.
[HC55]
Safety information for customers in the EU
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products
from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in the following countries.
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GR, HU, IS, IT, LT, LU, LV,
MT, NL, NO, PL, PT, RO, SE, SI, SK
This product is intended for general consumer. (Category 3)
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
(Inside of product)
(Tuotteen sisällä)
(Produktets innside)
1177
About descriptions in these operating instructions
Operations in these instructions are described using remote control, but you
can do the operations with the main unit if the controls are the same.
Your unit may not look exactly as illustrated.
These operating instructions are applicable to models SC-HC55 and
SC-HC35. Unless otherwise indicated, illustrations in these operating
instructions are of SC-HC55.
[HC55] :indicates features applicable to SC-HC55 only.
[HC35] :indicates features applicable to SC-HC35 only.
Pages to be referred to are indicated as “> ±±”.
[CD] :indicates CD-DA (except MP3).
[MP3] :indicates MP3 files.
Information for Users on Collection and Disposal of Old
Equipment and used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please take
them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries
outside the European Union]
These symbols are only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or dealer
and ask for the correct method of disposal.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination with
a chemical symbol. In this case it complies
with the requirement set by the Directive for
the chemical involved.
Cd
SC-HC55_35-RQTX1265.book 3 ページ 2011年3月27日 日曜日 午後7時32分
4
RQTX1265
Unit and media care
Pull out the AC mains lead from the outlet before maintenance.
Clean this unit with a soft, dry cloth
When dirt is heavy, wring the cloth moistened in water tightly to
wipe the dirt, and then wipe it with a dried cloth.
When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials (towels, etc.) that can fall
apart. Small grains may get stuck inside the speaker cover.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Maintenance of the lens
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc handling precautions
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc.).
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
Accessories Table of contents
Check the supplied accessories before using this unit. Safety precautions.................................................................2
Accessories............................................................................4
Unit and media care...............................................................4
Connections ...........................................................................5
Attaching the unit to a wall (optional)..................................6
Control reference guide ........................................................8
Opening/Closing the sliding door ........................................9
Disc operations ......................................................................9
Radio operations..................................................................11
Sound adjustment................................................................12
Timer .....................................................................................12
Listening to audio from iPod or iPhone.............................12
[HC55] Using a Bluetooth
®
compatible device ...................13
Listening to audio from a USB device ...............................16
Others ...................................................................................16
Troubleshooting...................................................................17
Specifications.......................................................................19
1 Remote control
([HC55] N2QAYB000643)
([HC35] N2QAYB000641)
1 FM indoor antenna
1 AM loop antenna
1 AC mains lead
1 Battery for remote
control
Wall mounting accessories
2 Safety holders E
2 Safety holder screws C
(Black)
2 Wall mount brackets
1 Safety holder D
1 Safety holder screw B
(Silver)
2 Rear pads
Product numbers correct as of January 2011. These may be subject to
change.
Do not use AC mains lead with other equipment.
The remote control information
Insert so the poles (i and j) match those in the remote
control.
Use alkaline or manganese batteries.
R6/LR6, AA
Place this side in before the other side.
Clean the lens regularly to prevent malfunctions. Use a
blower to remove dust and a cotton swab if it is extremely
dirty.
You cannot use a CD type lens cleaner.
Do not leave the sliding door open for prolonged periods of
time. This will cause the lens to get dirty.
Be careful not to touch the lens with your fingers.
DO DO NOT
SC-HC55_35-RQTX1265.book 4 ページ 2011年3月27日 日曜日 午後7時32分
5
RQTX1265
ENGLISH
Connections
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position with the
least amount of interference.
2 Connect the AM loop antenna.
Keep the loop antenna cord away from other wires and
cords.
AStand the antenna up on its base until it clicks.
BAM loop antenna
3 Connect the AC mains lead.
Connect the AC mains lead after all other connections
are complete.
Turn the unit on after a few seconds.
Open the EXT-IN AUX/Headphone/USB cover to connect
headphones, USB devices or external music devices (e.g. MP3
player).
Push the projecting part to open the cover A.
Top View
Connect the headphones (not supplied)
Listening at full volume for long periods may damage the user’s ears.
To prevent hearing damage, avoid listening for prolonged periods of time.
Excessive sound pressure from earphones and headphones can cause
hearing loss.
Connect an external music device (for AUX
mode)
You can select the sound input level of the external device.
Switch the equalizer off or turn the volume of the external device down to
reduce the input signal. High level of input signal will distort the sound.
For details, refer to the instruction manual of the other equipment.
Cables and devices are not supplied.
Connect the USB device (not supplied)
Notes on speakers
These speakers do not have magnetic shielding. Do not place them near a
television, personal computer or other devices easily influenced by
magnetism.
Basic Connections


ユヹヵノリワ
Back View
Exhaust holes
Adhesive tape
FM indoor antenna
To household mains socket
Power consumption in standby
mode:
Approx. 0.2 W
Additional Connections
Reduce the volume level and connect the
headphones.
Plug type: 3.5 mm stereo B
1 Plug the audio cable (not supplied) into
the EXT-IN AUX jack C.
Plug type: 3.5 mm stereo
2 Press [EXT-IN, RADIO] repeatedly to
select “AUX” and start playback on the
connected device.
[HC55] 1 Press [SOUND] repeatedly to select “INPUT
LEVEL”.
2 Press [2, 1] to select “HIGH” or “NORMAL”.
[HC35] Press [INPUT LEVEL] repeatedly to select “HIGH” or
“NORMAL”.
1 Reduce the volume level and plug the
USB device A into the USB terminal
D.
2 Press [EXT-IN, RADIO] repeatedly to
select “USB” and start playback.
(> 16)
ユヹヵノリワ
Projecting part
EXT-IN AUX
Headphone/USB cover
AUX
ユヹヵノリワ
SC-HC55_35-RQTX1265.book 5 ページ 2011年3月27日 日曜日 午後7時32分
6
RQTX1265
Attaching the unit to a wall (optional)
Supplied accessories
1 Safety holder screw B (Silver)
2 Safety holder screws C (Black)
1 Safety holder D (> 4)
2 Safety holders E (> 4)
2 Wall mount brackets
2 Rear pads
Commercially available accessories
(not supplied)
4 Wall bracket fixing screws F
1 Safety holder fixing screw G
Use screws with a nominal diameter of 4 mm, which are suitable to the
material of the wall (e.g., wood, steel, concrete, etc.)
1 Detach the stand from the unit.
1 Unscrew the fixing screw A (4 pieces) at the bottom
of the unit.
2 Gently pull the bottom of the stand and slide the
stand off the unit.
Keep the removed screws and stand in a safe place.
Installation accessories
Keep the wall mount brackets out of reach of children to prevent
swallowing.
Keep the rear pads out of reach of children to prevent swallowing.
Keep the screws out of reach of children to prevent swallowing.
Keep the safety holder out of reach of children to prevent swallowing.
Safety precautions
WARNING!
Only a qualified building contractor shall install or uninstall this
unit.
Improper installation may cause the unit to fall, resulting in injury.
To prevent injury, the unit must be securely attached to the wall in
accordance with the installation instructions.
Do not install the unit where it cannot support the load.
If the mounting parts are not strong enough, this may cause the unit to
fall, resulting in injury.
Do not use installation methods other than instructed.
This may cause the unit to fall and be damaged, resulting in injury.
Do not install the unit at locations other than vertical walls.
This may cause the unit to fall and be damaged, resulting in injury.
Take the safety factor for mounting strength into account.
Insufficient strength will cause the unit to fall, resulting in injury.
The wall on which the unit is to be attached to should be capable of
supporting 33 kg per screw.
Insufficient strength of the walls will cause the unit to fall in the long
run.
Do not disassemble or modify the wall-mounting hanger.
This will cause the unit to fall and be damaged, resulting in injury.
CAUTIONS!
Do not install this unit at humid or dusty locations, or locations
where airborne grease or steam may come into contact with the
unit, or under an air conditioner where water may drip onto the unit.
This may have negative impact on the unit, resulting in fire or electric
shock.
Secure enough space of more than 30 cm above the main unit and
more than 10 cm on the left and right sides respectively. Keep space
between the wall and rear of the unit clear of obstructions.
Blocking the exhaust holes on the main unit may result in fire.
Use the designated components for installation.
Otherwise, the main unit may fall and be damaged, resulting in injury.
Prevent the mounting screws or AC mains lead from coming into
contact with metal parts inside the wall during installation.
Failure to do so may cause electric shock.
When removing the main unit, remove the wall mounting screws as
well.
Otherwise the wall mounting screws may hit a person and lead to
injury.
Install the unit at a height where the USB port and operation buttons
can be seen for safe operation.
Operating at improper position may cause the unit to fall and be
damaged, resulting in injury.
Notes on installation
Before installation, read the “Safety precautions” and “Wall mount
instructions” for correct installation.
For optimal performance and to prevent potential problems, do not
install this unit:
at locations other than vertical walls.
near a sprinkler or a sensor.
near high-voltage lines or power sources.
near heating device.
at locations where the unit is subject to vibration or impact.
near sources of magnetism, heat, vapour, airborne grease, etc.
at locations where there may be water droplets (e.g. under an air
conditioner).
Do not install this unit under ceiling lights (e.g. spotlight, halogen
light, etc.).
Failure to do so may bend the cabinet or lead to damage caused by
high heat.
Use a proper installation method that suits the structure and
material of the wall.
Use a soft blanket or cloth to prevent damage to the product or floor
during installation.
When tightening screws, make sure the screws are not
loosely-tightened or overtightened.
Secure a safe surrounding area and pay attention to safety during
installation.
Panasonic is not liable for incidental or consequential damages
resulting from improper installation or operation.
Wall mount instructions
Before installation, turn the unit off and disconnect the AC mains lead
from the household mains socket.
Bottom of main unit
Stand
Soft blanket or cloth
Fixing screw
A
SC-HC55_35-RQTX1265.book 6 ページ 2011年3月27日 日曜日 午後7時32分
7
RQTX1265
ENGLISH
2 Measure and mark the position of the wall
mount brackets (Both sides).
Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
3 Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
Use a spirit level to ensure both wall mount brackets are level.
Use a screw which is strong enough to support the weight of at least
33 kg.
4 Fix the safety holder D onto the unit with the
safety holder screw B.
Before attaching, stick the rear pads (supplied) to A.
Screw tightening torque: 50 N0cm to 70 N0cm.
5 Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
Connect the FM/AM antenna and the AC mains lead to the unit before
hanging the unit onto the wall. (> 5)
After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6 Fix the safety holders E onto the wall mount
brackets with the safety holder screws C (Both
sides).
Screw tightening torque: 80 N0cm to 120 N0cm.
7 Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
Refer to step 3 for requirements before screwing.
229 mm
12.5 mm
300 mm
480 mm
48.5 mm
229 mm
680 mm
89 mm
118 mm
139 mm
133 mm
At least 30 mm
7.5 mm to 9.4 mm
4 mm
Wall mount bracket
Safety holder
screw B
Wall
Safety holder E
Safety holder
screw C
Safety holder fixing screw G
Safety holder D
Fixed to the wall
SC-HC55_35-RQTX1265.book 7 ページ 2011年3月27日 日曜日 午後7時32分
8
RQTX1265
Control reference guide
Buttons such as 2 function the same as the remote control.
They can be used interchangeably.
Top view
Front view
Remote control
Main unit
[HC55]
[HC35]

[HC35]
ヰヱユワバヤロヰヴユ ヰヱユワバヤロヰヴユ
ンモュリヰンモュリヰ
ヷヰロヶヮユヷヰロヶヮユ


1 [SLEEP] (> 12)
2 Standby/on switch [Í],
[Í/I] (> 9, 10, 16)
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of power.
3 Numeric buttons
[1-9, 0, S10] (> 10, 11,
16)
To select a 2-digit
number
e.g. 16: [S10] # [1] # [6]
To select a 3-digit
number
e.g. 226: [S10] # [S10]
# [2] #[2] # [6]
4 [DEL] (> 10)
5 [HC55] [ , iPod] (> 13,
14)
[HC35] [iPod] (> 13)
6 [CD] (> 10)
7 [:], [9] (> 10, 11,
13, 14, 16)
8 [1/;] (> 10, 13, 14, 16)
[HC55] [] (> 15)
9 [6], [5] (> 10, 11,
13)
: [SOUND] (> 5, 9, 12, 14)
; [D.BASS] (> 12)
< [PLAY MENU] (> 10)
= [iPod MENU] (> 13)
[HC55] [ MENU] (> 15)
> [3,
4, 2, 1], [OK] (> 5,
10, 11, 12, 13, 15, 16)
? [DISPLAY] (> 10, 14)
[jDIMMER]
Press and hold to dim the
display panel. Press and hold
again to cancel.
@ [HC55] [OPEN/CLOSE
SENSOR] (> 9)
[HC35] [INPUT LEVEL]
(> 5)
A [iPod <] (> 9)
[iPod <, OPEN/CLOSE]
[HC55] Sensor activity
indicator*
B [PLAY, F] (> 12)
C [CLOCK/TIMER] (> 12)
D [PROGRAM] (> 10, 11)
E [+, VOL ,–]
[– VOLUME +] (> 15)
Adjusts sound volume.
F [MUTE] (> 15)
Mutes the sound. Press again to
cancel. “MUTE” is also cancelled
when the volume is adjusted or
the unit is turned off.
G [EXT-IN, RADIO]
[RADIO/EXT-IN] (> 11,
16)
H [] (> 10, 13, 14, 16)
[HC55] [] (> 15)
I [PRESET EQ] (> 12)
J [RADIO MENU] (> 11)
K [AUTO OFF]
This function allows you to turn
the unit off (except in radio
mode) after the unit is left
unused for about 30 minutes.
When the function is turned on,
the “A.OFF” indicator light.
L [AUTO PRESET] (> 11)
M [CD <] (> 9)
[CD <, OPEN/CLOSE]
[HC55] Sensor activity
indicator*
N Standby indicator
O [HC55] Open/Close
sensor (> 9)
P Speaker
Q Display
R Sliding door
S [HC55] Microphone
(> 15)
T [HC55] Bluetooth
®
indicator (> 14)
U Remote control signal
sensor
Distance:
Within approx. 7 m directly in
front.
* The sensor activity indicator will
light when the Open/Close sensor
is turned on.
One of the indicators will flash
while the sliding door is opening or
closing.


30º 30º
SC-HC55_35-RQTX1265.book 8 ページ 2011年3月27日 日曜日 午後7時32分
9
RQTX1265
ENGLISH
Opening/Closing the
sliding door
Preparation
Press [Í] to turn the unit on.
For disc operations:
A While the sliding door is closed, press [CD <]
to open the sliding door.
For iPod/iPhone operations:
B While the sliding door is closed, press [iPod <]
to open the sliding door.
Closing the sliding door
Press [CD <] or [iPod <] again.
Keep fingers away from the sliding door when it is closing to avoid possible
minor injuries.
Damage may occur if the sliding door is forced closed.
Be careful of CD hitting the sliding door while being removed.
The sliding door will not close if the docking switch lever is not returned to the
original position.
With this function the sliding door can be opened without
pressing a button. The sliding door will open or close by moving
the palm of your hand over the sensors on the top of the unit.
For disc operations:
Place the palm of your hand over sensor B and
then move it over sensor A.
To close the sliding door, place the palm of your hand over
sensor A and then move it over sensor B.
For iPod/iPhone operations:
Place the palm of your hand over sensor A and
then move it over sensor B.
To close the sliding door, place the palm of your hand over
sensor B and then move it over sensor A.
To change the setting of the open/close sensor
The sensitivity of the sensor can be changed to increase or
decrease the activating area of the open/close sensor.
Press [OPEN/CLOSE SENSOR] repeatedly to
select “MODE 1”, “MODE 2”, “MODE 3” or
“OFF SENSOR”.
Select the mode that allows correct operation.
Factory preset: “MODE 2”
To turn the open/close sensor off, select “OFF SENSOR”.
To change the sound effect settings of the
open/close sensor
1 Press [SOUND] repeatedly to select “BUZZER”.
2 Press [2] or [1] to select the following setting.
A red light is lit from the position of the sensor. This is normal.
The open/close sensor might be unintentionally activated if an object, hand,
part of your arm, pets or children move over the top of the unit.
If the open/close sensor does not react, move the palm of your hand closer to
the top of the unit and change the speed that you move your hand.
If the open/close sensor does not work, try changing the sensor’s setting. If it
still does not work, open/close the sliding door using the buttons on the unit or
the remote control.
When the sensor setting is changed to “MODE 1”, move your hand closer
(approx. 3 cm) over the unit.
The disc operation side of the sliding door will not open during CD playback
or pause.
Disc operations
1 Press [Í] to turn the unit on.
2 Open the sliding door. (> left)
3 With the label of the disc facing
towards you, tilt the disc into the
disc tray under the sliding door.
4 Place the disc onto the spindle in
the centre and then push the disc
down until it clicks into place.
Make sure that the unit does not fall when
inserting the disc.
5 Close the sliding door. (> left)
Removing a disc
1 Open the sliding door.
2 Hold the centre and the top right of the disc and pull the top
right of the disc to unlock it from the spindle.
3 Tilt the disc so as not to touch the sliding door or the lens and
remove the disc.
Opening the sliding door
[HC55] Open/Close sensor
AB
ンモュリヰ
ヷヰロヶヮユ
ヷヰロヶヮユ
LOW: Set the sound effect level to low.
MID: Set the sound effect level to medium.
HIGH: Set the sound effect level to high.
OFF: Turn the sound effect off.
Inserting a disc
SC-HC55_35-RQTX1265.book 9 ページ 2011年3月27日 日曜日 午後7時32分
10
RQTX1265
1 Press [Í] to turn the unit on.
2 Insert the disc to be played (> 9).
3 Press [CD].
4 Press [1/;] to start play.
After performing steps 1-3 in “Basic play”
1 Press [PLAY MENU] repeatedly to select
“REPEAT”.
2 Press [2, 1] to select “ON REPEAT” and press
[OK].
3 Press [1/;] to start play.
To stop repeat play, select “OFF REPEAT” in step 2.
After performing steps 1-3 in “Basic play”
1 Press [PLAY MENU] repeatedly to select “PLAY
MODE”.
2 Press [2, 1] to select the following mode and
press [OK].
3 Press [1/;] to start play.
During random play, you cannot skip to the previous track.
The current play mode is cleared when you open the sliding door.
To repeat program play or selected play mode, select “ON REPEAT” in PLAY
MENU.
Enables you to program up to 24 tracks.
After performing steps 1-3 in “Basic play”
1 Press [PROGRAM] during the stop mode.
3 Press [1/;] to start play.
The program memory is cleared when you open the sliding door.
Basic play
Stop Press [].
Pause Press [1/;]. Press again to resume play.
Skip Press [:] or [9] to skip track.
Press [3, 4] to skip album. (MP3)
Search [CD] Press and hold [6] or [5].
Direct access
play
(Play starts from
the track you
selected.)
[CD]: Press the numeric buttons to select
the track.
[MP3]:
1 Press [3, 4] to select the album.
2 Press [9] once and then the
numeric buttons to select the track.
This function does not work during
random play or program play.
View contents
information
Press [DISPLAY] repeatedly during play
or pause.
The current track’s information, etc. is
displayed.
Maximum number of displayable characters:
approximately 30
This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags.
Text data that is not supported will not be
displayed or shown differently.
Repeat play
Play mode function
1-TRACK 1TR: Plays one selected track on the disc.
1-ALBUM 1ALBUM:
[MP3]
Plays one selected album on the disc.
Press [3, 4] to select the album.
RANDOM RND: Plays a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND:
[MP3]
Plays all tracks in one selected album
randomly.
Press [3, 4] to select the album.
Program play
2
[CD]:
Press the numeric buttons to select the track.
To program more tracks, continue by pressing the
numeric buttons.
[MP3]:
1 Press [3, 4] to select the album.
2 Press [9] once and then the numeric buttons to
select the track.
3 Press [OK].
To program more tracks, repeat steps 1 - 3.
Cancel programme
mode
Press [PROGRAM] in the stop mode to
clear “PGM” indicator from the display.
Check programme
contents
Press [:] or [9] when “PGM” is
displayed in the stop mode.
Delete last
programmed track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
1 Press [] in the stop mode.
2 Press [] again while blinking
“CLR ALL”.
SC-HC55_35-RQTX1265.book 10 ページ 2011年3月27日 日曜日 午後7時32分
11
RQTX1265
ENGLISH
Radio operations
1 Press [EXT-IN, RADIO] repeatedly to select
“FM” or “AM”.
2 Press [6] or [5] to select the frequency of
the required station.
“ST” is displayed when a stereo FM broadcast is being
received.
To tune automatically, press and hold [6] or [5] until
the frequency starts changing rapidly.
jTo cancel auto tuning, press [6] or [5] once again.
jAuto tuning may not function when there is excessive
interference.
To improve FM sound quality
1 Press [RADIO MENU] to select “FM MODE” while receiving
FM broadcasts.
2 Press [2, 1] to select “MONO” and then press [OK].
Select “STEREO” in Step 2 to return to stereo broadcasts.
“MONO” is canceled if the frequency is changed.
To improve AM sound quality
1 Press [RADIO MENU] to select “B.PROOF” while receiving
AM broadcasts.
2 Press [2, 1] to select the beat proof setting (“BP 1” or
“BP 2”) and press [OK].
This setting is reset to “BP 1” when changes are made (e.g. frequency is
changed).
You can preset up to 30 FM channels and 15 AM channels.
Preparation
Press [EXT-IN, RADIO] repeatedly to select “FM” or “AM”.
Automatic presetting
1 Press [OK] to switch between the “LOWEST” and
“CURRENT” frequency.
2 Press [AUTO PRESET].
“PGM” starts to flash and the tuner starts to preset all the stations
it can receive into the channels in ascending order.
Manual presetting
1 Press [6] or [5] to tune to the required station.
2 Press [PROGRAM].
3
While “PGM” is flashing, press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is preset in that channel.
To preset more stations, repeat steps 1 - 3.
Selecting a preset station
Press [:] or [9] to select the channel.
Alternatively, press the numeric buttons to select the channel.
This unit is factory-set to AM 9 kHz, but you can change it to
receive broadcasts allocated in AM 10 kHz steps.
To change the step
1 Press [EXT-IN, RADIO] to select “AM”.
2 Press and hold [RADIO/EXT-IN] on the main unit.
After a few seconds the display changes to display current
minimum frequency.
3 Continue to hold down [RADIO/EXT-IN] on the main unit.
When the minimum frequency changes, release the button.
To return to the original step, repeat steps 1 - 3.
After the setting is changed, any previously preset frequency will be cleared.
The unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
When “FM” is selected
Press [DISPLAY] to display the text data.
Each time you press the button:
PS: Program service
PTY: Program type
(Frequency display)
RDS displays may not be available if reception is poor.
Notes on CD-R/CD-RW
This unit can play CD-R and CD-RW recorded with CD-DA or MP3.
Use an audio recording disc for CD-DA and finalize* it when you finish
recording.
* A process performed after recording that enables CD-R or CD-RW
players to play audio CD-R and CD-RW.
The unit may not be able to play some discs due to the condition of the
recording.
Do not use irregularly shaped CDs.
Do not attach extra labels and stickers.
Do not use CDs with labels and stickers that are coming off or with
excessive adhesive under the labels and stickers.
Do not attach scratch-proof covers or any other kind of accessories.
Do not write anything on the CDs.
Do not clean CDs with liquids (Wipe with a soft and dried cloth).
Creating MP3 files playable on this unit
Maximum number of tracks and albums: 999 tracks and 254 albums
(Excluding Root folder).
Compatible compression rate: Between 64 kbps and 320 kbps (stereo).
128 kbps (stereo) is recommended.
Disc formats: ISO9660 level 1 and level 2 (except for extended formats).
The time for reading TOC depends on the number of the tracks, folders
or folder structures.
Limitations on MP3
This unit is compatible with multi-sessions and it takes more time to start
playing.
This unit cannot play files recorded using packet write.
If the disc includes both MP3 and normal audio data (CD-DA), the unit
plays the type recorded in the inner part of the disc. If the disc includes
both MP3 and other types of audio data (e.g. WMA or WAV), the unit
plays only the MP3.
Depending on how you create the MP3 files, they may not play in the
order you numbered them or may not play at all.
Manual tuning
Memory preset
AM frequency step
RDS broadcasting
SC-HC55_35-RQTX1265.book 11 ページ 2011年3月27日 日曜日 午後7時32分
12
RQTX1265
Sound adjustment
The following sound effects can be added to the audio output.
You may experience a reduction in sound quality when these effects are used
with some sources. If this occurs, turn the sound effects off.
Timer
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
2 Within 10 seconds, press [3, 4] to set the
time.
3 Press [OK].
To display the clock, press [CLOCK/TIMER].
Reset the clock regularly to maintain accuracy.
You can set the timer to come on at a certain time to wake you
up.
This unit offers 3 optional play timers.
Preparation
Turn the unit on and set the clock (> above).
Prepare the music source (disc, radio, iPod/iPhone, USB or
AUX) and set the volume.
1 Press [CLOCK/TIMER] repeatedly to select
FPLAY 1”, “FPLAY 2” orFPLAY 3”.
2 Within 10 seconds, press [3, 4] to set the
starting time.
3 Press [OK].
4 Set the finishing time by repeating steps 2 and
3.
To activate the timer
5 Press [PLAY, F] repeatedly to set the desired
play timer on.
6 Press [Í] to turn the unit off.
The timer will start at the preset time, with the volume increasing gradually to
the preset level.
The sleep timer can turn the unit off after a set time.
1 Press [SLEEP] to turn the sleep function on or
off.
30MIN # 60MIN # 90MIN # 120MIN
^--------------- OFF (Cancel) (------------}
2 Press [SLEEP] once to check the remaining
time.
The play timer and sleep timer can be used together. The sleep timer always
has the priority. Be sure not to overlap the timer settings.
When “AUTO OFF” is “ON” and the unit is left unused for about 30 minutes,
the unit will shut down even if the play time or sleep time has not expired.
Listening to audio from
iPod or iPhone
Inserting an iPod/iPhone
1 Open the sliding door. (> 9)
2 Insert the suitable dock adapter (not supplied)
for the iPod/iPhone.
Insert the side of the iPod/iPhone dock adapter with the
clips facing towards you first and then push the opposite
side until it clicks into place.
3 Press [<] to unlock the
iPod/iPhone dock and then
pull the docking switch
lever to tilt the iPod/iPhone
dock.
4 Connect the iPod/iPhone
(not supplied) firmly.
Be sure to remove the iPod/iPhone from its case.
5 Push the docking switch
lever back until it clicks into
place.
6 Close the sliding door. (> 9)
Removing an iPod/iPhone
1 Repeat step 1 and 3 (> above).
2 To remove, simply pull the iPod/iPhone straight out.
3 Repeat step 5 and 6 (> above).
If the iPod/iPhone dock is not tilted when connecting or disconnecting the
iPod/iPhone, it may cause damage to the connector.
Be sure to use a dock adapter that is compatible with your iPod/iPhone.
To purchase a dock adapter, consult your iPod/iPhone dealer.
Reduce the volume of the main unit to minimum before connecting or
disconnecting the iPod/iPhone.
Preset EQ Press [PRESET EQ] repeatedly to select
“HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or “FLAT”.
Bass or
Treble
1 Press [SOUND] repeatedly to select “BASS”
or “TREBLE”.
2 Press [2, 1] to adjust the level (-4 to +4).
Surround
Sound
1 Press [SOUND] repeatedly to select
“SURROUND”.
2 Press [2, 1] to select “ON SURROUND”.
To cancel surround sound, select
“OFF SURROUND” in step 2.
If interference in FM stereo reception increases,
cancel the surround sound effect.
D.Bass Press [D.BASS] during play to select
“ON D.BASS” or “OFF D.BASS”.
Setting the clock
Play timer
Check the settings
(When the unit is
on or in standby
mode)
Press [CLOCK/TIMER] twice.
(The setting is displayed.)
Cancel Press [PLAY, F] twice to clear the timer
indicator from the display.
Sleep timer
Inserting/Removing an iPod/
iPhone
A Clips
B Dock adapter
C iPod/iPhone docking
switch lever
D Connector

Click!
Click!
SC-HC55_35-RQTX1265.book 12 ページ 2011年3月27日 日曜日 午後7時32分
13
RQTX1265
ENGLISH
Preparation
Press [iPod] ([HC55]: [ , iPod]) repeatedly to select “IPOD”.
The operations may vary or not work depending on the iPod/iPhone models.
Compatible iPod/iPhone (as of January 2011)
Update your iPod/iPhone with the latest software before using this unit.
Compatibility depends on the software version of your iPod/iPhone.
Depending on the model, it may be necessary to remove the iPod/iPhone and
select the album, artist, etc. on the iPod/iPhone.
Notes on iPhone:
All phone features can only be controlled by the iPhone’s touch screen.
The unit does not display incoming calls or the phone status.
The ringtone of incoming call can be heard from the iPhone’s speaker.
When the unit is in iPod/iPhone mode, the ringtone can also be heard from
the unit’s speakers.
Connecting or disconnecting the iPhone from the unit will not cancel a call.
There is no Apple Inc. specification that will guarantee the iPhone responses
above. iPhone responses may vary on new iPhone models or iPhone new
software updates.
Charging the iPod/iPhone
When iPod/iPhone is being charged in standby mode, “IPOD
CHARGING” is shown on the main unit’s display.
Check iPod/iPhone to see if the battery is fully charged. If you
are not using iPod/iPhone for an extended period of time after
recharging has completed, disconnect it from the main unit as
the battery will be depleted naturally. (Once fully recharged,
additional recharging will not occur.)
This unit can output internet radio if “vTuner for Panasonic” is
installed on your iPhone/iPod touch
.
Visit the below website for the following information about
“vTuner for Panasonic”:
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software versions,
purchasing, installation and operation details.)
Preparation
Install “vTuner for Panasonic” to your iPhone/iPod touch.
1 Insert the iPhone/iPod touch to this unit.
2 Press [ , iPod] repeatedly to select “INTERNET
RADIO”.
“vTuner for Panasonic” starts.
[HC55] Using a Bluetooth
®
compatible device
Frequency band used
This unit uses the 2.4 GHz frequency band, however other devices may use this
frequency as well. To avoid interference with other wireless devices, please
follow the cautions listed below.
Certification of this device
This unit conforms to frequency restrictions and has received certification based
on frequency laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
Taking apart/modifying the unit.
Usage restrictions
Wireless transmission and/or usage with all Bluetooth
®
equipped devices is
not guaranteed.
Compatible mobile phones capable of wireless transmission include and
comply to standards set by the Bluetooth SIG, Inc. However, if the mobile
phone is optimized to meet standard specifications, some functions may
work. Even so, depending on the specifications and settings of the mobile
phone, a connection may not be established, nor are the methods of
operation, display, or operation guaranteed.
This unit supports Bluetooth
®
security features, however depending on the
operating environment and/or settings, this security may not be sufficient.
Use caution when transmitting data wirelessly.
Please be aware that Panasonic accepts no responsibility for data and/or
information that may be compromised during a wireless transmission.
iPod/iPhone operations
Play Press [1/;].
Pause Press [1/;] or []. Press again to
resume play.
Skip track Press [:] or [9].
Search the current track Press and hold [6] or [5].
Display iPod/iPhone
menu/return to previous
menu
Press [iPod MENU] in the play
mode. (Remote control only)
Select contents from
iPod/iPhone menu
Press [3, 4] and then [OK].
(Remote control only)
Name Memory size
iPod touch 4th generation 8 GB, 32 GB, 64 GB
iPod nano 6th generation 8 GB, 16 GB
iPod touch 3rd generation 32 GB, 64 GB
iPod nano 5th generation (video camera) 8 GB, 16 GB
iPod touch 2nd generation 8 GB, 16 GB, 32 GB
iPod classic 120 GB, 160 GB (2009)
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 160 GB (2007)
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPhone 4 16 GB, 32 GB
iPhone 3GS 8 GB, 16 GB, 32 GB
iPhone 3G 8 GB, 16 GB
iPhone 4 GB, 8 GB, 16 GB
[HC55]
Listening to the Internet Radio
About using Bluetooth
®
What is Bluetooth
®
?
Bluetooth
®
technology allows you to make a wireless
connection with another electronic device.
SC-HC55_35-RQTX1265.book 13 ページ 2011年3月27日 日曜日 午後7時32分
14
RQTX1265
Range of use
Use this device within an unobstructed 10 m range. The range of usage or
perimeter may be shortened depending on any obstructions, devices causing
interference, other people in the room, or the construction of the building.
Please note that the range mentioned above is not guaranteed.
Effects from other devices
It is possible that this unit may not operate correctly or you may experience
other effects of instability such as “broken up” audio, etc. when other devices
are placed within close proximity. Therefore, in order to prevent signal
interference, we recommend separating this unit from the following devices
during use:
Microwave oven/Wireless LAN/Electronic devices/Audio & Video devices/Office
Assistant machines & devices/Digital cordless phones/Fax machines, etc.
If you live in close proximity to a broadcasting studio and the signal is too
strong, the unit may not operate correctly.
When using a notebook PC with a wireless LAN transmitter, do not use this
unit and the wireless LAN at the same time.
If you are still experiencing noise even outside of the 5 m range of a wireless
LAN device, turn the power to the wireless LAN device off.
Intended usage limitations
This unit is intended for normal, general use. This unit is not
developed or manufactured with the intention of use in “high
safety”
§
or hazardous occupations. Do not use this unit in these
kinds of environments or occupations.
§
The following examples require extreme caution, and can directly result in
loss of life, or extreme bodily harm.
e.g.) Nuclear Engineering, and control of a nuclear reaction/automated control
of aircraft/air traffic control management/controlling movement of heavy freight
systems/control of life support or extension systems/control of weapons
systems and/or missile launch systems, etc.
Preparation
Pair the Bluetooth
®
device with this unit to create an audio
connection.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
When using it for the first time, it enters pairing mode
automatically.
2 While this unit is in pairing mode, access the
Bluetooth
®
menu of the Bluetooth
®
device and
execute a Bluetooth
®
search to find this unit
(SC-HC55).
Please refer to the Bluetooth
®
device user manual for
further instruction on how to connect a Bluetooth
®
device.
If prompted for the passkey, enter “0000”.
3 If pairing is successful, the paired device’s
name will be displayed for 2 seconds. The
Bluetooth
®
indicator lights up. The unit is now
ready to be used with the Bluetooth
®
device.
Make sure the Bluetooth
®
device supports A2DP (Advance Audio Distribution
Profile).
This unit supports the A2DP reception which is copyright-protected by
SCMS-T method.
A2DP enables you to stream stereo sound from an audio source (mobile
phone, PC or laptop) to this unit via Bluetooth
®
.
Depending on the specification or setting of mobile phones, connection may
not be established, or operation and display may vary.
You can register up to 6 devices into this unit. Disconnect the current
Bluetooth
®
device and refer to “To register more devices” (> 15).
If you register more than the maximum device number, the oldest device in
connection history will be overwritten.
If a registered device is re-registered, it will be overwritten.
Pair the Bluetooth
®
device with this unit to create an audio
connection.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2 On the Bluetooth
®
device:
Select this unit (SC-HC55) on the Bluetooth
®
setup screen to make the connection.
3 On the Bluetooth
®
device:
Start playback of a music source.
If the device is connected, the music will be heard on this unit.
The Bluetooth
®
indicator lights when there is a connection.
Please refer to the Bluetooth
®
device user manual if required.
4 You can also make the following controls with
the remote control.
To utilise these functions, the Bluetooth
®
device must support AVRCP (Audio
Video Remote Control Profile).
This unit cannot transmit data to a Bluetooth
®
device.
When playing iPod/iPhone by Bluetooth
®
with the main unit, intermittent
sound may be experienced if you leave the iPod/iPhone Bluetooth
®
menu
screen active or when making Bluetooth
®
registration and connection. If this
occurs, please exit the iPod/iPhone Bluetooth
®
menu screen.
When playing music by iPod/iPhone via Bluetooth
®
connection and the iPod/
iPhone is connected into this unit iPod/iPhone dock, the audio will not be
re-produced while “BLUETOOTH” is selected. Select “IPOD” to continue
enjoying the music.
You can select the sound input level of the Bluetooth
®
device.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2 Press [SOUND] repeatedly to select “INPUT
LEVEL”.
3 Press [2, 1] to select “0”, “i1” or “i2”.
Select “0” if the sound is distorted.
Press [DISPLAY] repeatedly to view the
information of the current connected device.
BLUETOOTH ---------------------# Connected device name
^-------------------------- Connected profiles(------------------------}
Bluetooth
®
pairing
Basic play
Play Press [1/;] to start play.
Stop Press [].
Pause Press [1/;]. Press again to resume play.
Skip track Press [:] or [9].
Display
information
Press [DISPLAY] repeatedly.
Input level
Display function
SC-HC55_35-RQTX1265.book 14 ページ 2011年3月27日 日曜日 午後7時32分
15
RQTX1265
ENGLISH
This unit works as a Bluetooth
®
hands-free for your mobile
phones.
This unit does not work with Headset Profile (HSP).
When the mobile phone is too close to the microphone of this unit, noise may
occur. Always keep the mobile phone away from the microphone of this unit
when making a call.
The audio from a disc will be paused while calling in hands-free mode.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2 Press [ MENU] to display “DISCONNECT?”
and then press [OK].
A confirmation message is displayed.
3 Press [2, 1] to select “YES” and then press
[OK].
The connection can also be stopped when you disable Bluetooth
®
transmission on the connected Bluetooth
®
device.
Preparation
Press [ , iPod] repeatedly to select “BLUETOOTH”.
These functions are unavailable if a device is connected. Disconnect the
Bluetooth
®
devices to display these functions.
To register more devices
1 Press [ MENU] repeatedly to select
“NEW DEV.” and then press [OK].
The unit enters pairing mode and “PAIRING” starts blinking
on the display.
2 While this unit is in pairing mode, access the
Bluetooth
®
menu of the Bluetooth
®
device and
execute a Bluetooth
®
search to find this unit
(SC-HC55).
If prompted for the passkey, enter “0000”.
To select communication quality
1 Press [ MENU] repeatedly to select
“LINK MODE”.
2 Press [2, 1] to select the following modes and
then press [OK].
To select Auto Link mode
1 Press [ MENU] repeatedly to select
“AUTO LINK”.
2 Press [2, 1] to select the following modes and
then press [OK].
When “LINKING” is displayed, pressing [ MENU] is invalid.
Auto Link works only if your device supports A2DP.
The communication quality settings also depend on the settings on the
connected device. If the communication quality of the connected device is set
for stable communication, the quality of the audio will remain low even if this
unit is set to “MODE 2”.
Hands-Free Profile (HFP)
To answer a call
(“IN CALL” blinks)
Press [ ]. “CALLING” starts blinking on
the display (Talk into the unit’s
microphone).
Press [ ] again to transfer the call to the
mobile phones (“TRANSFER” blinks. You
may now converse using the mobile
phone).
To cancel a call Press [ ].
To adjust the
sound volume
Press [+, VOL ,–] (Adjustable from
“TEL VOL 1” to “TEL VOL 10”).
To mute the
microphone
Press [MUTE]. Press again to cancel.
(During “MIC MUTE”, the caller is not able
to hear your voice).
Disconnecting a Bluetooth
®
device
Advanced functions
MODE 1: Connection with emphasis on communication
stability
MODE 2: Connection with high bit rate for good audio quality
(Communication might easily be disconnected in
this mode, select “MODE 1” if this occurs).
ON: This unit will automatically select “BLUETOOTH”
when a Bluetooth
®
device is connected.
OFF
SC-HC55_35-RQTX1265.book 15 ページ 2011年3月27日 日曜日 午後7時32分
16
RQTX1265
Listening to audio from a
USB device
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer
USB devices that support USB 2.0 full speed
The USB connectivity enables you to connect and play MP3
tracks from a USB device.
Preparation:
Before connecting any USB device to this unit, be sure to back
up the data.
It is not recommended to use a USB extension cable. The
device connected via the cable will not be recognized by this
unit.
1 Plug the USB device into the unit. (> 5)
2 Press [EXT-IN, RADIO] repeatedly to select
“USB”.
3 Press [1/;] to start play.
Before removing the USB device, select a source other
than “USB”.
Removing the USB device while it is selected can damage the data stored in
the device.
Others
Other Panasonic audio/video equipment may start functioning
when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote
control operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same
mode.
1 Press [EXT-IN, RADIO] to select “AUX”.
2 Press and hold [RADIO/EXT-IN] on the main
unit and [2] on the remote control until the main
unit’s display shows “REMOTE 2”.
3 Press and hold [OK] and [2] on the remote
control for at least 4 seconds.
To change the mode back to “REMOTE 1”, repeat the steps
above by replacing [2] with [1].
When the following situations occur, reset the memory:
There is no response when buttons are pressed.
You want to clear and reset the memory contents.
1 Disconnect the AC mains lead. (Wait for at least
3 minutes before proceeding to step 2.)
2 While pressing and holding down
[Í/I] on the main unit, reconnect the AC mains
lead.
“--------” appears on the display.
3 Release [Í/I].
All the settings are returned to the factory preset. You will
need to reset the memory items.
Compatible devices
Notes on USB
Supported format: Files with extension “.mp3” or “.MP3”
CBI (Control/Bulk/Interrupt) is not supported.
FAT12, FAT16 and FAT32 file systems are supported.
Depending on the sector size, some files may not work.
This unit can access up to 254 albums (excluding Root folder) and 2500
tracks.
The maximum number of tracks in a folder is 999 tracks.
Only one memory card will be selected when connecting a multiport USB
card reader, typically the first memory card inserted.
Disconnect the USB card reader from the unit when you remove the
memory card. Failure to do so may cause malfunction to the device.
When you connect the digital audio player to the USB port, it charges all
the time when the unit is on.
USB operations
Stop Press [].
The position is memorized while “RESUME” is
displayed.
Press [1/;] to resume play.
Press [] again to clear the position.
Pause Press [1/;].
Press [1/;] again to restart play.
Skip Press [:] or [9]. (Track)
Press [3, 4]. (Album)
Direct access play
(Play starts with
the track you
select.)
1 Press [3, 4] to select the album.
2 Press [9] once and then the
numeric buttons to select the track.
For other operating functions, they are similar as those
described in “Disc operations”.
Changing the main unit and
remote control mode
Memory reset (Initialization)
SC-HC55_35-RQTX1265.book 16 ページ 2011年3月27日 日曜日 午後7時32分
17
RQTX1265
ENGLISH
Troubleshooting
Before requesting service, make the following checks. If you are
in doubt about some of the check points, or if the solutions
indicated in the following guide do not solve the problem, consult
your dealer for instructions.
Incorrect display or play will not start.
You have not inserted the disc properly. Insert it correctly.
The disc is scratched or dirty (Tracks skipped).
There is moisture on the lens. Wait for about an hour and then
try again.
MP3 cannot be read.
You may not be able to play MP3 if you have copied a
multi-session disc that has no data between sessions.
When creating a multi-session disc, it is necessary to close the
session.
The amount of data on the disc is too small. Set the amount of
data to above 5 MB.
Noise is heard or no sound.
While playing MP3, noise may occur if the recording is poor.
Keep this unit away from mobile phones if the interference is
apparent.
Turn the volume up.
Switch the unit off, check and correct the connection and then
switch the unit on. Causes include straining of the speakers
through excessive volume or power and using the unit in a hot
environment.
Humming heard during play.
An AC mains lead or fluorescent light is near the cords. Keep
other appliances and cords away from this unit’s cables.
A beat sound or noise is heard while receiving radio
broadcast.
Switch the television or other audio player off or separate it
from the unit.
Switch the portable audio player off if connected to the EXT-IN
AUX port.
A low hum or noise is heard during AM broadcast.
Keep the antenna away from other cables and cords.
Keep the AM antenna away from the unit.
The picture on the television near the unit disappears or
stripes appear on the screen.
The location and orientation of the antenna are incorrect.
The television antenna wire is too close to the unit. Separate
the antenna wire of the television from the unit.
No response when remote control buttons are pressed.
Check that the battery is inserted correctly (> 4).
The sliding door does not open (or malfunctions).
Is the unit turned on?
Is the open/close sensor turned off? (> 9)
During CD playback or pause, the CD operation side of the
sliding door will not open.
The open/close sensor may not react to dark objects.
Depending on the lighting, the open/close sensor may
malfunction.
In this case, try moving the unit to a different place. (Do not
place this unit under strong lighting, e.g., direct sunlight or
fluorescent lights, etc.)
When the open/close sensor is on, the sliding door may open/
close while operating the buttons on the top of the unit.
In this case, use the remote control.
The open/close button lights are flashing.
If there is an object close to both open/close sensors, both
open/close button lights will flash and the open/close sensor
will not function.
In this case try the below:
jChanging the sensor setting to “MODE 1”. (> 9)
jMove the unit away from the object, or vice versa. (It will take
a few seconds for the unit to check if the clearance is
sufficient.)
The open/close sensor sound effect cannot be heard when
the sliding door opens/closes.
This is normal while listening to the radio, during playback, etc.
or when linked to a Bluetooth
®
device.
iPod/iPhone does not turn on.
Cannot operate with [iPod MENU] button.
Verify that the iPod/iPhone battery is not depleted before
connecting it to the unit.
Before inserting the iPod/iPhone into the dock, turn both the
unit and the iPod/iPhone off. Turn the power on and select the
appropriate source.
No sound is heard from the speakers.
The iPod/iPhone is not inserted correctly into the dock. Turn
the iPod/iPhone off and remove it from the dock connector.
Reinsert it and turn it on again.
Make sure that the iPod/iPhone is actually playing something.
Adjust the volume.
Distorted sound or the sound level is too low.
Make sure the equalizer function of the iPod/iPhone is turned
off.
iPod/iPhone cannot be controlled by the remote control or
main unit.
Make sure the iPod/iPhone is inserted properly into the dock.
Check the dock connection and make sure that iPod/iPhone is
selected as the source of music (> 12).
iPod/iPhone does not charge.
Check all connections (> 5, 12).
Common problems
[HC55] Open/close sensor
iPod/iPhone operations
SC-HC55_35-RQTX1265.book 17 ページ 2011年3月27日 日曜日 午後7時32分
18
RQTX1265
The name of the connected device is shown as “¢”.
Character that cannot be displayed will be replaced by “¢”.
An unknown device name is detected and displayed as
¢¢¢¢¢”.
Noise is heard or broken sound.
The Bluetooth
®
communication distance has exceeded 10 m.
Bring the device closer to the unit.
There are obstructions between the device and the unit.
Remove or avoid the obstacles.
Select “MODE 1” to improve connection quality (> 15).
Interference from mobile phones.
No response when [1/;] is pressed.
Disconnect the USB device and then reconnect it.
Alternatively, turn the unit off and on again.
The USB drive or its contents cannot be read.
The USB drive format or its contents is/are not compatible with
the unit (> 16).
The USB host function of this product may not work with some
USB devices.
USB devices with storage capacity of more than 8 GB may not
work in some instances.
Slow operation of the USB flash drive.
Large file size or high memory USB flash drive takes longer
time to read.
The elapsed time displayed is different from the actual play
time.
Copy the data to another USB device or backup the data and
reformat the USB device.
The following messages or service numbers appear on the
unit’s display when something unusual is detected during
startup and use.
“--:--”
You plugged the AC mains lead in for the first time or there was
a power failure recently. Set the time (> 12).
“ADJUST CLOCK”
Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
Play timer is not set. Adjust the play timer accordingly.
“PGM FULL”
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
“NO PLAY”
A CD-ROM disc that is not in CD-DA or MP3 format is inserted.
It cannot be played.
Check the content. Only MP3 format files can be played.
If there are more than 255 albums or folders (audio and
non-audio), some of the MP3 files in these albums may not be
read and played. Transfer these music albums to another
USB. Alternatively, reformat the USB device and save these
music albums prior to saving the other non-audio folders.
“ERROR”
Incorrect operation is performed. Read the instructions and try
again.
“F61” or “F76”
There is a power supply problem. Consult the dealer.
Disconnect the USB device. Turn the unit off and on again.
“AUTO OFF”
The unit has been left unused for about 30 minutes and will
shut down in a minute. Press any button to cancel it.
“ILLEGAL OPEN”
Sliding door is not in correct position. Turn the unit off and on
again.
“NODEVICE”
The iPod/iPhone device is not inserted correctly. Read the
instructions and try again (> 12).
The USB device is not inserted. Check the connection.
“REMOTE 1”
The main unit is in “REMOTE 1” mode. Switch the remote
control to “REMOTE 1” mode (> 16).
“REMOTE 2”
The main unit is in “REMOTE 2” mode. Switch the remote
control to “REMOTE 2” mode (> 16).
[HC55] “F70”
There is a Bluetooth
®
module problem. Disconnect the AC
mains lead and consult your dealer.
“NO DISC
Insert the disc to be played (> 9).
“NOT SUPPORTED”
You have inserted an iPod/iPhone that cannot be played
(> 12).
[HC55] “START ERROR”
Check the iPhone/iPod touch.
Visit the below website for more information:
http://radio.vtuner.com/panasonic/en/
“UNLOCKED”
The iPod/iPhone docking switch lever is not locked in position.
Make sure that the iPod/iPhone docking switch lever is
properly pushed back into place (> 12).
[HC55] “CANNOT SET”
Select an audio source other than “BLUETOOTH” or
“INTERNET RADIO”.
[HC55] Bluetooth
®
operations
USB operations
Displayed messages
SC-HC55_35-RQTX1265.book 18 ページ 2011年3月27日 日曜日 午後7時32分
19
RQTX1265
ENGLISH
Specifications
§ MPEG-1 Layer 3, MPEG-2 Layer 3
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Total harmonic distortion is measured by a digital spectrum analyzer.
AMPLIFIER SECTION
RMS Output Power Stereo mode
Front Ch (both ch driven) 20 W per channel (6 ),
1kHz, 10% THD
Total RMS Stereo mode power 40 W
TUNER SECTION
Preset Memory FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range 87.50 MHz to 108.00 MHz
(50 kHz step)
Antenna terminals 75 (unbalanced)
Amplitude Modulation (AM)
Frequency range 522 kHz to 1629 kHz
(9 kHz step)
520 kHz to 1630 kHz
(10 kHz step)
DISC SECTION
Disc played [8 cm or 12 cm]
CD, CD-R/RW
(CD-DA, MP3
§
)
Pick up
Wavelength 790 nm
Laser power CLASS 1, CLASS 1M
[NORSK]
Bølgelengde 790 nm
Laserstyrke Klasse 1, Klasse 1M
Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
Audio Output (Disc)
Number of channels FL, FR, 2 ch
SPEAKER SECTION
[HC55]
Type 2 way, 2 speaker system
(Passive Radiator)
Speaker unit(s)
Woofer 6.5 cm Cone typek1 per
channel
Tweeter 1.5 cm Piezo typek1 per
channel
Passive Radiator 8cmk2 per channel
Impedance 6
[HC35]
Type 1 way, 1 speaker system
(Passive Radiator)
Speaker unit(s)
Full range 6.5 cm Cone typek1 per
channel
Passive Radiator 8cmk2 per channel
Impedance 6
[HC55] BLUETOOTH SECTION
Bluetooth
®
system specification
V2.1 + EDR
Wireless equipment
classification
Class 2 (2.5 mW)
Supported profiles A2DP, AVRCP, HFP
Frequency band 2402 MHz to 2480 MHz
(Adaptive Frequency
Hopping)
Driving distance 10 m Line of Sight
(iPhone 4, at height 1 m, in
“MODE 1”)
TERMINAL SECTION
Phone jack
Terminal Stereo, 3.5 mm jack
AUX (Rear)
Terminal Stereo, 3.5 mm jack
USB Port
USB Standard USB 2.0 full speed
Media file format support MP3 (¢.mp3)
USB device file system FAT12, FAT16, FAT32
USB port power Max 500 mA
GENERAL
Power consumption 28 W
Power consumption in standby mode
Approx. 0.2 W
Power supply AC 220 V to 240 V, 50 Hz
Dimensions (WkHkD) With stand
480 mmk194 mmk84 mm
Without stand
480 mmk194 mmk69 mm
Mass Approx. 2.4 kg
Operating temperature range 0 oC to r40 oC
Operating humidity range 35 % to 80 % RH
(no condensation)
SC-HC55_35-RQTX1265.book 19 ページ 2011年3月27日 日曜日 午後7時32分
20
RQTX1265
Zasady bezpieczeństwa
Urządzenie
Aby ograniczyć niebezpieczeństwo pożaru, porażenia prądem lub
uszkodzenia urządzenia,
Nie należy wystawiać urządzenia na działanie deszczu, wilgoci, kapanie
lub zachlapanie.
Na urządzeniu nie należy ustawiać żadnych naczyń zawierających płyny,
takich jak wazony.
–Należy korzystać wyłącznie z zalecanych akcesoriów.
Nie należy demontować obudowy urządzenia.
Nie należy podejmować prób samodzielnej naprawy. Naprawę urządzenia
należy zlecić wykwalifikowanym pracownikom serwisu.
–Należy uważać, aby do wnętrza urządzenia nie dostały się metalowe
przedmioty.
Na urządzeniu nie wolno umieszczać żadnych ciężkich przedmiotów.
Przewód zasilania
Aby ograniczyć niebezpieczeństwo pożaru, porażenia prądem lub
uszkodzenia urządzenia,
–Należy się upewnić, że napięcie źródła zasilania odpowiada napięciu
podanemu na urządzeniu.
–Dokładnie podłączyć wtyczkę przewodu zasilającego do gniazda
ściennego.
Nie wolno ciągnąć za przewód, zginać go ani kłaść na nim ciężkich
przedmiotów.
Nie wolno dotykać wtyczki mokrymi rękami.
Przy odłączaniu przewodu należy chwycić za wtyczkę.
Nie wolno podłączać urządzenia do uszkodzonego gniazda ściennego
oraz gdy wtyczka przewodu zasilającego jest uszkodzona.
Urządzenie należy zainstalować w takim miejscu, aby można było
natychmiast od
łączyć przewód zasilający od gniazda w przypadku
wystąpienia jakichkolwiek problemów.
Urządzenie
W tym urządzeniu znajduje się laser. Wykonywanie regulacji innych niż
opisane lub postępowanie w sposób nieprzewidziany w instrukcji obsługi
grozi niebezpiecznym naświetleniem promieniami lasera.
Nie należy umieszczać na urządzeniu źródeł otwartego ognia, takich jak
zapalone świece.
To urz ądzenie może odbierać zakłócenia wywołane użyciem telefonu
komórkowego. Jeżeli takie zakłócenia wystąpią, wskazane jest zwiększenie
odległości pomiędzy urządzeniem a telefonem komórkowym.
Urządzenie jest przeznaczone do używania w klimacie umiarkowanym.
Wybór miejsca
Urządzenie należy ustawić na równej powierzchni.
Aby ograniczyć niebezpieczeństwo pożaru, porażenia prądem lub
uszkodzenia urządzenia,
Niniejszego urządzenia nie należy instalować lub umieszczać w szafce na
książki, zabudowanej szafce lub innej ograniczonej przestrzeni, w celu
zapewnienia dobrej wentylacji.
Nie należy zasłaniać otworów wentylacyjnych urządzenia gazetami,
obrusami, zasłonami i podobnymi przedmiotami.
–Urządzenie należy chronić przed bezpośrednim działaniem promieni
słonecznych, wysoką temperaturą, wysoką wilgotnością oraz nadmiernymi
drganiami.
Baterie
Istnieje niebezpieczeństwo wybuchu w przypadku, gdy baterie zostaną
nieprawidłowo włożone. Baterie należy wymieniać wyłącznie na baterie typu
zalecanego przez producenta.
Nieprawidłowe obchodzenie się z bateriami może prowadzić do wycieku
elektrolitu i może być także przyczyną pożaru.
Nie ogrzewaj i nie wrzucaj do ognia.
Nie należy pozostawiać baterii przez dłuższy czas w samochodzie z
zamkniętymi drzwiami i oknami wystawionym na bezpośrednie działanie
promieni słonecznych.
Nie demontuj i nie powoduj zwarcia.
Baterii alkalicznych lub manganowych nie należy ładować ponownie.
Nie używaj baterii, z których usunięta została osłona.
Baterie należy wyjąć, jeżeli pilot nie będzie używany przez dłuższy czas.
Należy je przechowywać w chłodnym, ciemnym miejscu.
W przypadku utylizacji baterii, należ
y się skontaktować z lokalnymi władzami
lub ze sprzedawcą celem uzyskania informacji o prawidłowym sposobie
postępowania.
OSTRZEËENIE
UWAGA
Nazwa marki Bluetooth
®
i logotypy są własnością firmy Bluetooth SIG, Inc. i
wszelkie ich użycie przez firmę Panasonic Corporation jest objęte licencją.
Pozostałe znaki towarowe i nazwy handlowe są własnością ich posiadaczy.
Technologia kodowania dźwięku MPEG Layer-3 na licencji firmy Fraunhofer
IIS i Thomson.
Oznaczenia identyfikacyjne produktu znajdują się na spodzie urządzenia.
(Wewnątrz
urządzenia)
“Made for iPod” i “Made for iPhone” oznaczają, że urządzenie
elektroniczne zostało specjalnie zaprojektowane do współpracy
odpowiednio z urządzeniem iPod lub iPhone i spełnia normy
wydajności firmy Apple.
Firma Apple nie jest odpowiedzialna za działanie tego urządzenia i
jego zgodność z normami bezpieczeństwa oraz innymi przepisami.
Używanie tego urządzenia z urządzeniem iPod lub iPhone może
wpływać na wydajność pracy bezprzewodowej.
iPhone, iPod, iPod classic, iPod nano i iPod touch są znakami
towarowymi firmy Apple Inc., zastrzeżonymi w USA i innych krajach.
SC-HC55_35-RQTX1265.book 20 ページ 2011年3月27日 日曜日 午後7時32分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Panasonic SCHC55EP Instrukcja obsługi

Kategoria
Domowe zestawy audio
Typ
Instrukcja obsługi

w innych językach