Panasonic SCNE5EG Instrukcja obsługi

Typ
Instrukcja obsługi
VQT4U60
until
2013/02/16
Operating Instructions
Instrukcja obsługi
Návod k obsluze
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
Dziękujemy za zakupienie tego produktu.
Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie przeczytać niniejsze zalecenia i
zachować instrukcję obsługi do wglądu.
Děkujeme, že jste si zakoupil tento výrobek.
Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte pro pozdější použití.
Wireless Speaker System
System głośników bezprzewodowych
Bezdrátový reproduktorový systém
Model No. SC-NE5
Included Installation Instructions (l 3, 2627)
The installation work should be done by a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating instructions to ensure
that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this system.)
Załączone instrukcje instalacji (l 33, 5657)
Instalację powinien przeprowadzić wyłącznie wykwalifikowany specjalista.
Przed rozpoczęciem pracy należy się dokładnie zapoznać z instrukcją instalacji oraz z instrukcją obsługi, aby się
upewnić, że instalacja została przeprowadzona prawidłowo.
(Należy zachować tę instrukcję. Może ona być potrzebna podczas konserwacji lub przemieszczania systemu.)
Přiložené pokyny k instalaci (l 61, 8485)
Instalační práce musí být provedeny kvalifikovaným instalatérským odborníkem.
Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a návod k obsluze, abyste instalaci provedli
opravdu správně.
(Uschovejte tento návod. Mohli byste jej potřebovat při údržbě nebo při manipulaci se systémem.)
EG
POLSKI ENGLISHČESKY
SC-NE5~VQT4U60.book 1 ページ 2013年1月22日 火曜日 午後1時38分
2
VQT4U60
Table of contents
Safety precautions............................................ 3
Supplied items .................................................. 4
Unit and media care.......................................... 4
Playable media.................................................. 5
Control reference guide ................................... 6
Connections ...................................................... 8
Inserting media ................................................. 9
Network settings............................................. 10
Using AirPlay with this system’s speakers
......... 14
Playing back music files on the DLNA server
..... 15
Bluetooth
®
operations .................................... 16
About Bluetooth
®
............................................ 17
Media playback operations ............................17
Listening to the radio ..................................... 19
Sound adjustment........................................... 20
Clock and Timer .............................................. 20
Others .............................................................. 21
Troubleshooting.............................................. 23
Attaching the speaker unit to a wall (optional)
.... 26
Specifications.................................................. 28
About descriptions in these operating instructions
Pages to be referred to are indicated as “l ±±
Unless otherwise indicated, operations are described using the remote control.
Android
TM
, Google Play
TM
, Google Chrome
TM
browser are trademarks or registered trademarks of Google Inc.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products and used batteries, please
take them to applicable collection points, in accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please
contact your local municipality, your waste disposal service or the point of sale where
you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
Cd
SC-NE5~VQT4U60.book 2 ページ 2013年1月22日 火曜日 午後1時38分
3
VQT4U60
ENGLISH
Safety precautions
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or
splashing.
Do not place objects filled with liquids, such as vases, on
this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Do not let metal objects fall inside this unit.
Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
Insert the mains plug fully into the socket outlet.
Do not pull, bend, or place heavy items on the lead.
Do not handle the plug with wet hands.
Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
The mains plug is the disconnecting device. Install this unit
so that the mains plug can be unplugged from the socket
outlet immediately.
Button-type battery (Lithium battery)
Risk of fire, explosion and burns. Do not recharge,
disassemble, heat above 60
o
C or incinerate.
Keep the Button-Type battery out of the reach of children.
Never put Button-Type battery in mouth. If swallowed call
your doctor.
Unit
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not place sources of naked flames, such as lighted
candles, on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
This unit is intended for use in moderate climates.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Button-type battery (Lithium battery)
Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
Insert with poles aligned.
Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
Remove the battery if you do not intend to use the remote
control for a long period of time. Store in a cool, dark place.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
NORSK
Produkt
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Utsett ikke produktet for regn, fukt, drypping eller sprut.
Ikke plasser objekter som er fylt med væske, som vaser,
på apparatet.
Bruk kun anbefalt tilbehør.
Fjern ikke deksler.
Reparer ikke denne enheten selv, overlat service til
kvalifisert servicepersonell.
Vekselstrømnett
Nettstøpselet er trukket ut fra denne enheten.
Installer denne enheten slik at nettstøpselet umiddelbart kan
trekkes fra stikkontakten.
Produkt
Dette produktet anvender en laser. Betjening av kontroller
eller justering eller andre inngrep enn de beskrevet i denne
bruksanvisning kan føre til farlig bestråling.
Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
Dette apparatet er beregnet for bruk under moderate
klimaforhold.
Plassering
For å redusere faren for brann, elektrisk støt eller skade på
apparatet:
Ikke plasser apparatet i en bokhylle, et innebygget
kabinett eller et annet lukket sted. Pass på at produktet er
godt ventilert.
Apparatets ventilasjonsåpninger må ikke dekkes til med
aviser, duker, gardiner eller lignende.
WARNING
CAUTION
ADVARSEL
FORSIKTIG
Product Identification Marking is located on the bottoms of
the CD unit and the speaker unit.
SC-NE5~VQT4U60.book 3 ページ 2013年1月22日 火曜日 午後1時38分
4
VQT4U60
Supplied items
1 CD unit
(SL-NE5)
1 Speaker unit
(SB-NE5)
Check the supplied accessories before using this
system.
Unit and media care
Pull out the AC mains lead from the outlet before
maintenance.
Clean this system with a soft, dry cloth
When dirt is heavy, wring a cloth moistened in water tightly to
wipe the dirt, and then wipe it with a dry cloth.
Never use alcohol, paint thinner or benzine to clean this
system.
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Maintenance of the lens
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc handling precautions
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or
labels (rented discs etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes.
To dispose or transfer this system
This system may keep the user settings information
internally. If you discard this system either by disposal
or transfer, then follow the procedure to return all the
settings to the factory presets to delete the user
settings. (l 23, “To return all settings to the factory
preset”)
The operation history may be recorded in the
memory of this system.
This system (SC-NE5)
Accessories
1 Remote control
(with a battery)
(N2QAYC000090)
2 AC mains lead
1 FM indoor
antenna
Wall mounting accessories
1 Safety holder
1 Screw
2 Wall mount
brackets
Do not use AC mains lead with other equipment.
Product numbers provided in these operating instructions are
correct as of January 2013. These may be subject to change.
Clean the lens regularly to prevent malfunctions. Use a
blower to remove dust and a cotton swab if it is extremely
dirty.
You cannot use a CD type lens cleaner.
Do not leave the door open for prolonged periods of time.
This will cause the lens to get dirty.
Be careful not to touch the lens with your fingers.
DO DO NOT
Lens
SC-NE5~VQT4U60.book 4 ページ 2013年1月22日 火曜日 午後1時38分
5
VQT4U60
ENGLISH
Playable media
Compatible with “IPOD_DOCK” connection
(Using Lightning connector)
Compatible with “IPOD_PORT” connection
[Using dedicated USB cable (not supplied)]
(as of January 2013)
Compatibility depends on the software version. Update your
iPod/iPhone/iPad to the latest software before using it with
this system.
Please be aware that Panasonic accepts no responsibility for
the loss of data and/or information.
A disc with the CD Logo.
This system can play back discs that conform to the CD-DA
format.
This system may not be able to play some discs due to the
condition of the recording.
(as of January 2013)
This system does not guarantee connection with all USB
devices.
FAT12, FAT16 and FAT32 file systems are supported.
This system supports USB 2.0 full speed.
This system can support USB devices of up to 32 GB.
Supported format: Files with the extension “.mp3” or “.MP3”.
Compatible compression rate: Between 64 kbps and
320 kbps (stereo).
Depending on how you create the MP3 files, they may not
play in the order you numbered them or may not play at all.
Creating MP3 files on a CD-R/RW
Maximum number of tracks and albums: 999 tracks and 254
albums (Excluding Root folder).
Disc formats: ISO9660 level 1 and level 2 (except for
extended formats).
If the disc includes both MP3 and normal audio data
(CD-DA), this system plays the type recorded in the inner
part of the disc.
This system cannot play files recorded using packet write.
Creating MP3 files on a USB device
Maximum number of tracks and albums: 2500 tracks and 254
albums (Excluding Root folder).
Only one memory card will be selected when connecting a
multiport USB card reader, typically the first memory card
inserted.
Compatible iPod/iPhone/iPad
iPod touch (5th generation)
iPod nano (7th generation)
iPhone 5
iPod touch
1st, 2nd, 3rd, 4th, and 5th generation
iPod nano
2nd, 3rd, 4th, 5th, 6th, and 7th generation
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad (3rd, and 4th generation) / iPad 2 / iPad
iPad mini
Compatible CD
Compatible AirPlay devices
iOS 4.3.3 or later
iPod touch
3rd, 4th, and 5th generation
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS
iPad (3rd, and 4th generation) / iPad 2 / iPad
iPad mini
iTunes 10.2.2 or later (Mac / PC)
Compatible USB devices
Compatible MP3 files
SC-NE5~VQT4U60.book 5 ページ 2013年1月22日 火曜日 午後1時38分
6
VQT4U60
Control reference guide
This system consists of the CD unit and the speaker unit. The both units are wirelessly connected when turned
on.
CD unit
Speaker unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa.
In standby mode, the unit is still consuming a small
amount of power.
The CD unit and the speaker unit operate
simultaneously. Press either standby/on switch
to turn both units on or to standby mode.
Refer to page 23 when the units do not turn on
simultaneously.
2 Select the audio source
“CD”
---------.
“FM”
----------.
“BLUETOOTH”
----------.
“AUX”
^
“IPOD_PORT” / “USB”(
“IPOD_DOCK”(b
3
Basic playback control buttons
4 iPod port for iPod/iPhone/iPad and USB devices
(l 5, 9)
5 Adjust the volume (0 (min) to 50 (max))
6 Network setup button (l 11)
7 Standby/on indicator
While this system is turned on:
The indicator lights in green when the CD unit and
the speaker unit are connected successfully, blinks
in green when they are connecting, and lights in
red when they fail to connect.
8 Display
9 Open the CD lid
10 Dock for iPod/iPhone with Lightning connector
(l 9)
11 Remote control signal sensor
Distance: Within approx. 7 m directly in front.
To avoid interference, please do not put any objects in
front of signal sensor.
12 WPS pairing button (l 10)
13 Wi-Fi
®
status indicator
8
9
11
10
Side view
VOLUME
2512
11
13
8
Top view
SC-NE5~VQT4U60.book 6 ページ 2013年1月22日 火曜日 午後1時38分
7
VQT4U60
ENGLISH
The CD unit’s display turns off if the CD unit is left unused for more than 3 minutes and the audio selector is set
to an option other than “CD”, “IPOD_DOCK”, or “IPOD_PORT”. To turn the display on, press any button on
the CD unit, or select “CD”, “IPOD_DOCK”, or “IPOD_PORT” as an audio source.
Placing the CD unit and the speaker unit:
Keep a minimum distance of 1 cm between the CD unit and the speaker unit when placing them.
The distance between the CD unit and the speaker unit should be a maximum of 10 m. The range can decrease depending on
the environment, obstacles or interference.
This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference
if this system is located too close to the devices that use the 2.4 GHz band.
This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.
Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example:
airports, hospitals, laboratories, etc).
Remote control
1 Turn this system on or off
2 Select the audio source
[iPod/USB] :
“IPOD_DOCK”
,.
“IPOD_PORT” / “USB”
[CD/RADIO] : “CD” ,. “FM”
[, AUX] : “BLUETOOTH” ,. “AUX”
3
Basic playback control buttons
4 Enter setup menu
5 Enter the iPod/iPhone menu /
Change displayed information
6 Set the sleep timer
7 Change the brightness of the display panel
Press to dim the display panel.
Press again to cancel.
8 Adjust the volume (0 (min) to 50 (max))
9 Mute the sound
Mutes the sound. Press again to cancel. “MUTE” is also
cancelled when the volume is adjusted or this system is
turned off.
10 Enter playback menu
11 Enter sound menu
12 Selection/OK
Before using for the first time
Remove the insulation sheet A.
To replace a button-type battery
Battery type: CR2025 (Lithium battery)
Set the button-type battery with its (i) mark
facing upward.
Keep the button-type battery out of reach of
children to prevent swallowing.
SLEEP
DIMMER
AUX
MUTE
PLAY MENU
SOUND
OK
ALBUM
iPod MENU
DISPLAY
SETUP
VOLVOL
iPod/
USB
CD/
RADIO
SC-NE5~VQT4U60.book 7 ページ 2013年1月22日 火曜日 午後1時38分
8
VQT4U60
Connections
1 Connect FM indoor antenna (supplied) to the
speaker unit.
2 Connect the AC mains lead after all other
connections are completed.
After connecting the AC mains lead to the mains socket, wait
for more than 15 seconds to turn on the Standby/on switch.
When this system is turned on, the CD unit and the speaker
unit are connected wirelessly.
When this system is turned on for the first time after
purchase, a message prompting you to connect a Bluetooth
®
device (“PAIRING”) is displayed. (l 16)
This system consumes a small amount of AC power (l 28)
even when turned off.
In the interest of power conservation, if you will not be using
this system for an extended period of time, unplug it from the
household mains socket.
These speakers do not have magnetic shielding. Do not
place them near a television, personal computer or other
devices easily influenced by magnetism.
Tape the antenna to a wall or column in a position with the
least amount of interference. (Use an FM outdoor antenna if
radio reception is poor.)
1 Plug the audio cable (not supplied) into the AUX
jack.
Plug type: 3.5 mm stereo
2 Press [ , AUX] to select “AUX” and start playback
on the connected device.
To select the sound input level of the
external device
1 While in AUX mode, press [PLAY MENU] to select
“INPUT LEVEL” and then press [OK].
2 Press [3, 4] to select “NORMAL” or “HIGH”.
The default setting is “NORMAL”.
Switch the equalizer off or turn the volume of the external
device down to reduce the input signal. High level of input
signal will distort the sound.
For details, refer to the instruction manual of the other
equipment.
The cables and the devices are not supplied.
If the CD unit and the speaker unit are not wirelessly
connected, or the output sound is interrupted, connect
the both units with two audio cables (plug type:
3.5 mm stereo, not supplied) as illustrated below.
We recommend you use cables of less than 5 m.
If the cables are connected, the displays show
“WIRED MODE” and this system starts wired
communication. This system automatically connects
wirelessly when the cables are disconnected.
Basic connection
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
To a household mains
socket
AC mains lead
(supplied)
Connect an external music device (for
AUX mode)
Connect the CD unit and the
speaker unit with cables (optional)
Audio cable (not supplied)
Audio cable (not supplied)
SC-NE5~VQT4U60.book 8 ページ 2013年1月22日 火曜日 午後1時38分
9
VQT4U60
ENGLISH
Inserting media
Make sure that the unit does not fall when inserting or
removing media.
When moving this unit, be sure to remove all media and turn
this unit to standby mode.
*1: Refer to “Playable media” for compatible models. (l 5)
*2: When using the “IPOD_PORT” connection, do not connect
the following models to this unit:
iPod classic, iPod [4th (colour display), and 5th (video)
generation], iPod nano (1st generation)
Unexpected behaviour may occur.
*3: When using the “IPOD_DOCK” connection:
Be sure to remove the iPod/iPhone from its case.
Make sure that the iPod/iPhone is fully inserted and its
back is resting against the cushion pad.
Make sure to hold the dock when removing the iPod/
iPhone.
*4: Use the “IPOD_PORT” connection to charge the iPad.
1 Press [CD <] to open the lid on the back of the CD unit.
Leave a space more than 10 cm behind the unit.
Do not place any objects behind the unit.
2 While holding the unit, push the centre of the CD until it clicks into place, and then close the CD lid.
Be careful not to scratch the CD.
Make sure you place the centre of the CD onto the CD spindle of the unit.
Note: Remove the CD only after it stops rotating.
Connect an iPod/iPhone/iPad
*1, 2
or USB device
Charging an iPod/iPhone/iPad
*4
Charging starts when an iPod*
2
/iPhone/iPad is
connected to this unit.
During standby mode, charging will not start from the USB
cable connection, however it will start as usual from the
Lightning connector.
To charge from the USB cable connection, start the charging
before turning this unit to standby mode.
Check the iPod/iPhone/iPad to see if the battery is fully
charged. (Once fully recharged, additional recharging will not
occur.)
If this unit is switched to standby mode “IPOD CHARGING” is
shown on the unit’s display.
Connect an iPod/iPhone with
Lightning connector*
1
Inserting a disc
Select “IPOD_PORT” as the source.
When connecting an iPod/iPhone/iPad, use the dedicated
USB cable (not supplied).
“USB” is displayed when a compatible USB device is
inserted.
Insert the USB device directly. Do not use any USB
extension cable.
Before removing the USB device, select a source other than
“USB”.
*3
Select “CD” as the source.
Select “IPOD_DOCK” as the source.
10 cm
The label side
SC-NE5~VQT4U60.book 9 ページ 2013年1月22日 火曜日 午後1時38分
10
VQT4U60
Network settings
You can wirelessly stream music from an iOS device
(iPhone, iPod, iPad), an Android device or a Mac/PC to
this system’s speakers by using the AirPlay or DLNA
feature.
To use these features, this system must join the same
2.4 GHz wireless network as the AirPlay
compatible device (l 5
) or the DLNA compatible
device.
It is also possible to use AirPlay without a wireless network
router. (l 14, “Directly streaming to this system (AirPlay)”)
Preparation
Place this system close to the wireless network
router.
1 Turn this system on.
2 Follow the chart below to choose the network
setting method.
If you want to perform wireless setting with your
Mac/PC, or you want to apply the advanced
setting, try “Method 4” on page 12.
To cancel this setting in the middle, press [Í] to turn off this
system.
Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
For up to date compatibility information on your wireless
network router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Using the WPS Push Button
Configuration (PBC)
1 Press and hold [s WPS] on the speaker unit.
{. “WPS” flashes on the display.
(The Wi-Fi status indicator blinks blue.)
Complete step 2 within 2 mins.
2 After “WPS” is indicated, press the WPS button on
the wireless network router.
3 The settings are completed when “SUCCESS” is
displayed and the Wi-Fi status indicator stops
blinking and lights in blue.
4 Press [OK] on the remote control to exit the
setting.
To use the WPS PIN code, refer to the notes on page 13.
Does your wireless network router
support WPS?
Yes
l right,
“Method 1”
l 11,
“Method 2”
l 12,
“Method 3”
No / Do not know
Yes No
Are you using an
iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Method 1
If your wireless network router supports WPS
(Wi-Fi Protected Setup
TM
).
The WPS identifier mark
WPS Push Button Configuration
(PBC) compatible wireless
network router may have this
mark.
“FAIL” may be displayed if the connection was not
made within the set time limit. Try the setting again.
If “FAIL” is still displayed, try other methods on page
11 or 12.
SC-NE5~VQT4U60.book 10 ページ 2013年1月22日 火曜日 午後1時38
11
VQT4U60
ENGLISH
With this method you will share the wireless network
settings of your iPod touch/iPhone/iPad with this
system.
The following explanations are based on an iPhone.
1 Disconnect any devices connected to the CD unit.
2 Connect the iPhone to your home wireless
network.
3 Connect the iPhone to the CD unit.
Choose one of the following connections.
“IPOD_DOCK” connection compatible iPod touch/
iPhone:
iPod touch/iPhone/iPad with iOS 5.0 or later:
Connect to the iPod port on the side of the CD unit
with a dedicated USB cable.
4 Unlock your iPhone and then press and hold
[sNETWORK SETUP] on the CD unit for more
than 3 seconds.
If “NOT SUPPORTED” or “SET WI-FI” is displayed,
check that the iPhone is connected to the wireless
network and try again from step 1.
5 A message will pop-up on your iPhone.
Allow the iPhone to share the wireless network
settings.*
1
{. The Wi-Fi status indicator blinks.
6 The settings are completed when “SUCCESS” is
displayed and the Wi-Fi status indicator stops
blinking and lights in blue.
7 Press [OK] on the remote control to exit the
settings.
*1: Depending on the network environment or the wireless
network router settings, it may take more than 10 mins. to
complete the settings.
Method 2
If you're using an iPod touch/iPhone/iPad.
(iOS version 5.0 or later.)
If “FAIL” is displayed press [OK] and try the setting
again. If “FAIL” is still displayed, try other methods on
page 10 or 12.
If the iPhone was disconnected midway through, try again
without disconnecting it.
SC-NE5~VQT4U60.book 11 ページ 2013年1月22日 火曜日 午後1時38
12
VQT4U60
You can make the wireless network settings with the
app, “Panasonic Stereo System Network Setup” (for
free).
If you’re using an Android device, download the app at
the Google Play Store. If you’re using an iPod touch/
iPhone/iPad
, download it at the App Store.
Preparation
Connect your smartphone to your home wireless
network.
Check the password for your home wireless network.
1 Press [SETUP] on the remote control repeatedly
to select “NET SETUP” and then press [OK].
{. “SETTING” is indicated on the display.
(The Wi-Fi status indicator blinks purple.)
2 Start “Panasonic Stereo System Network
Setup” on your smartphone and follow the
indications.
Note for the iOS version
After step 2
1 Enter the password for the home wireless network
to which the iOS device is connected.
2 When a message instructing you to connect the
iOS device to this system is displayed, press the
home button to close the app.
3 On the Wi-Fi network selection screen in
“Settings”, select “00 Setup _ _ _ _ _ _”.
“ _ ” stands for a digit that is unique to each set.
4 When a message indicating the completion of the
connection to this system is displayed, restart the
app.
5 When a message indicating the completion of the
Wi-Fi setup of this system is displayed, close the
app, and then check the operation of AirPlay, etc.
“Panasonic Stereo System Network Setup” for Mac OS is
also available at the App Store.
With this method, you will access this system’s
wireless network settings from the Internet browser of
your compatible device.
The following explanations are based on an iPhone.
1 Press [SETUP] on the remote control repeatedly
to select “NET SETUP” and then press [OK].
{. “SETTING” is indicated on the display.
(The Wi-Fi status indicator blinks purple.)
2 After “SETTING” is indicated, connect your
compatible device to this system’s wireless
network named00 Setup _ _ _ _ _ _”.
“ _ ” stands for a digit that is unique to each set.
Make sure that DHCP is enabled for the network setting
on your compatible device.
3 Start the Internet browser on your compatible
device and type “http://192.168.1.12/” into the
URL address field and display the page.
{. This system’s setup window is displayed.
Examples of Internet browsers
iOS device/Mac : Safari
Android device : Google Chrome browser
PC : Windows Internet Explorer
4 Select “Search wireless network”.
Method 3
Setting the network connection with the smartphone
app.
Method 4
Setting the network connection from an Internet
browser.
SC-NE5~VQT4U60.book 12 ページ 2013年1月22日 火曜日 午後1時38
13
VQT4U60
ENGLISH
5 Select and input the details.
Check your home wireless network name (Network
name (SSID)) and password for this network. This can
often be found on the wireless network router itself.
6 Select “JOIN” to apply the settings.
In the pop-up screen, select “OK” to continue.
Select “Cancel” to return to the setup window.
7 The settings are completed when “SUCCESS” is
displayed and the Wi-Fi status indicator stops
blinking and lights in blue.
8 Make sure to connect your compatible device back
to your home wireless network.
*1: If you have set your wireless network to be invisible, select
“BACK” and refer to “Alternative settings”.
The below settings are the alternative or additional settings
for “Method 4”.
(l 12)
Enable Java and Cookies in your browser settings.
This system can also be set using the WPS PIN code.
Replace step 2 of “Method 1” with the following steps.
(Before starting, refer to the wireless network router’s
operating instructions for details on how to enter the PIN
code.)
1 While “WPS” is flashing press and hold [s WPS] again
to display the 8 digit PIN code.
{. Wi-Fi status indicator blinks purple.
2 Enter the PIN code into the wireless network router.
[1] Select your home wireless network name.*
1
[2] Type the password.
If “FAIL” is displayed press [OK], check the wireless
network password and other settings and start again
from step 1.
Advanced network settings
Alternative settings
Instead of steps 4 and 5
Select “Manual settings”.
1 Type your home wireless network name into
the “Network name (SSID)” field.
2 Select the encryption method from the
“Security system” drop down list.
3 Type the password into the “Password” field
and then select “JOIN”.
Additional settings
If your home wireless network has been configured
to use specific IP Addresses, Subnet Mask, Default
Gateway, Primary DNS, etc.
Before step 6
Select “Advanced network settings”.
{. Input the required addresses into each field and select
“JOIN”.
To change the settings back to DHCP, select “ON” from the
“DHCP” drop down list.
If you want to change the name of this system
that is displayed as the AirPlay speakers or DLNA
renderer.
Before step 4
Select “Additional settings”.
1 Select “Edit STEREO SYSTEM name”.
2 Type a new name into the
“STEREO SYSTEM name” field.
{. Only ASCII characters can be used.
3 Select “OK”.
4 If this system is already connected to your home
wireless network:
–SelectAdditional settings”, and then select
Exit“.
If this system is not connected to your home
wireless network:
jContinue to step 4 of “Method 4”.
SC-NE5~VQT4U60.book 13 ページ 2013年1月22日 火曜日 午後1時38
14
VQT4U60
Using AirPlay with this
system’s speakers
1 Turn this system on.
Check that the Wi-Fi status indicator lights in
blue.
If it doesn’t light in blue, check the wireless
network settings. (l 10)
2 iOS device: Start the “Music(or iPod) app.
Mac/PC: Start “iTunes”.
If the Music app on your iOS device is used, select the
audio file you want to play.
3 Select “Panasonic NE5 _ _ _ _ _ _”*
1, 2
from the
AirPlay icon.
{. Check the volume settings before starting the playback.
(When AirPlay is used for the first time, the volume may
be output at the maximum setting.)
4 Start play.
The playback will start with a slight delay.
This system can be set to turn on automatically when this
system is selected as the output speakers. (l 22)
Playback of other audio sources will stop and AirPlay output
will have priority.
Volume changes on the iOS device or iTunes will be applied
to this system. (Refer to the iTunes Help for the required
settings in iTunes.)
With some iOS and iTunes versions, it may not be possible
to restart the AirPlay playback if the selector is changed
(e.g., “CD”) or this system is turned off, during the AirPlay
playback.
In this case, select a different device from the AirPlay icon of
the Music App or iTunes and then re-select this system as
the output speakers.
AirPlay will not work when playing back videos on iTunes.
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this system can be changed
from the “Edit STEREO SYSTEM name” settings.
(l 13, “Advanced network settings”)
With this function set to “ON”, you can stream music
from the iOS device or Mac / PC (iTunes 10.2.2 or
later) to this system without the need of a wireless
network router.
Previous network settings will be deleted when this
function is set to “ON”.
The following explanations are based on an iPhone.
1 Press [SETUP] repeatedly to select
“D.CONNECT”.
2 Press [3, 4] to select “ON” and then press [OK].
3 Press [3, 4] to select “OK? YES” and then press
[OK].
4 Connect your iPhone to this system’s wireless
network named “NE5 _ _ _ _ _ _”*
2
.
5 Enter the password that is indicated on this
system’s display.
6 Once the iPhone is connected to this system’s
wireless network, the setup is competed.
7 Continue to step 2 of “Using AirPlay with this
system’s speakers”.
This setting is reset to “OFF” when other network settings are
performed. (l 10)
When “D.CONNECT” is set to “ON”, this system will not be
connected to the Internet. It is not possible to update the
software or check the Wi-Fi signal strength.
When AirPlay is not being used, disconnect the AirPlay
compatible device from this network.
When using a computer on this network, make sure that all
the shared files are encrypted.
This feature is only compatible with the “Open System”
authentication method. It is not compatible with “Shared Key”
authentication method.
*1: “ _ ” stands for a digit.
*2: _ ” stands for a digit that is unique to each set.
Preparation
Complete the network settings. (l 10)
Connect the iOS device or Mac/PC to the same
home wireless network as this system.
NE5
e.g.,
iPhone iOS 6.0.1
NE5
e.g.,
iTunes 11.0
Directly streaming to this system
(AirPlay)
“PW _ _ _ _ _”*
1
is displayed.
The 5 digits after “PW” is the password for this
network.
SC-NE5~VQT4U60.book 14 ページ 2013年1月22日 火曜日 午後1時38
15
VQT4U60
ENGLISH
The first time “D.CONNECT” is set to “ON”, a
password for this system’s wireless network is
randomly created and memorised in this system.
This password is memorised until it is changed.
1 While “D.CONNECT” is set to “ON”:
Press [SETUP] repeatedly to select
“D.CONNECT”.
2 Press [3, 4] to select “ON” and then press [OK].
3 The current password is displayed.
The 5 digits after “PW” is the password for this
network.
4 Press any button to exit.
1 While “D.CONNECT” is set to “OFF”:
Press [SETUP] repeatedly to select
“D.CONNECT”.
2 Press [3, 4] to select “CHANGE PW” and then
press [OK].
3 Press [3, 4] to select “OK? YES” and then press
[OK].
4 The new password is displayed.
The 5 digits after “PW” is the new password for
this network.
5 Press any button to exit.
Note about changing the password
After changing this system’s wireless network
password, if you are not prompted to change the
password on the other devices, the following changes
are required.
iOS device (iPod touch/iPhone/iPad)*
1
:
Before choosing this system’s network,
1 Select [ ] located beside this system’s wireless
network name.
2 Select “Forget this Network” and then select
“Forget”.
3 Select this system’s wireless network and enter
the new password.
Mac/PC:
If the computer has memorised the old password, be
sure to change the memorised password for this
system’s wireless network to the new one.
Refer to the devices’s operating instructions for details.
*1:
Steps are based on iOS 6.0.1.
Playing back music files on the
DLNA server
You can share music files stored in the DLNA Certified
media server (PC with Windows 7 installed,
smartphone, etc.) connected to your home wireless
network, and enjoy the contents with this system’s
speaker.
1 Turn this system on.
Check that the Wi-Fi status indicator lights in
blue.
If it doesn’t light in blue, check the wireless
network settings. (l 10)
2 Operate the DMC compatible device and connect
to this system.
The device name of this system will be
displayed as “Panasonic NE5 _ _ _ _ _ _”*
1, 2
.
For details on how to use DMC compatible
devices, refer to the operating instructions of the
devices or the software.
Support format of DLNA client
File formats that are not supported by your DLNA
server cannot be played.
Depending on the contents and the connected equipment,
playback may not be possible.
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this system can be changed
from the “Edit STEREO SYSTEM name” settings.
(l 13, “Advanced network settings”)
Display the password
Change the password
Preparation
Complete the network settings. (l 10)
Connect your device with DMC (Digital Media
Controller) compatible software installed to the
same home wireless network as this system.
Add the contents and folder to the libraries of the
Windows Media
®
Player or the smartphone, etc.
Playlist of Windows Media
®
Player can play back only
the contents that are stored in the libraries.
Audio codec Example of file extension
MP3 .mp3
WAV .wav
SC-NE5~VQT4U60.book 15 ページ 2013年1月22日 火曜日 午後1時38
16
VQT4U60
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can listen to the sound from the Bluetooth
®
audio device from this system
wirelessly.
Refer to the operating instructions of the Bluetooth
®
device for details.
Preparation
Turn on the Bluetooth
®
feature of the device and
place the device near the speaker unit.
If this system is already connected to a Bluetooth
®
device, disconnect it.
1 Press [ , AUX] to select “BLUETOOTH”.
If “PAIRING” is indicated on the display, go to
step 3.
2 Press [PLAY MENU] to select “NEW DEV.” and
then press [OK].
{. “PAIRING” is indicated on the display.
3 Select “SC-NE5” from the Bluetooth
®
device’s
Bluetooth
®
menu.
4 Start play on the Bluetooth
®
device.
If prompted for the passkey, input “0000”.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Preparation
Turn on the Bluetooth
®
feature of the device and
place the device near the speaker unit.
If this system is already connected to a Bluetooth
®
device, disconnect it.
1 Press [ , AUX] to select “BLUETOOTH”.
{. “READY” is indicated on the display.
2 Select “SC-NE5” from the Bluetooth
®
device’s
Bluetooth
®
menu.
{. The name of the connected device is indicated on the
display for 2 seconds.
3 Start play on the Bluetooth
®
device.
This system can only be connected to one device at a time.
When “BLUETOOTH” is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth
®
device.
The Bluetooth
®
device will be disconnected if a different
audio source (e.g., [CD]) is selected.
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
Press [ , AUX] to select “BLUETOOTH”.
If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2 Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
The default setting is “MODE 1”.
If the sound input level of the Bluetooth
®
transmission
is too low, change the input level setting.
Preparation
Connect a Bluetooth
®
device.
1 Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2 Press [3, 4] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
^-------------------------------------------------J
Select “LEVEL 0” if the sound is distorted.
The default setting is “LEVEL 0”.
1 While a Bluetooth
®
device is connected:
Press [PLAY MENU] to select “DISCONNECT?”.
2 Press [3, 4] to select “OK? YES” and then press
[OK].
Pairing Bluetooth
®
devices
Connecting a paired Bluetooth
®
device
Bluetooth
®
transmission mode
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
SC-NE5~VQT4U60.book 16 ページ 2013年1月22日 火曜日 午後1時38
17
VQT4U60
ENGLISH
About Bluetooth
®
Frequency band used
This system uses the 2.4 GHz frequency band.
Certification of this device
This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
The actions below are punishable by law in some
countries:
Taking apart or modifying this system.
Removing specification indications.
Restrictions of use
Wireless transmission and/or usage with all
Bluetooth
®
equipped devices is not guaranteed.
All devices must conform to standards set by
Bluetooth SIG, Inc.
Depending on the specifications and settings of a
device, it can fail to connect or some operations can
be different.
This system supports Bluetooth
®
security features.
But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
This system cannot transmit data to a Bluetooth
®
device.
Range of use
Use this device at a maximum range of 10 m. The
range can decrease depending on the environment,
obstacles or interference.
Interference from other devices
This system may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this system is located too
close to other Bluetooth
®
devices or the devices that
use the 2.4 GHz band.
This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.
Intended usage
This system is for normal, general use only.
Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).
Media playback operations
The following marks indicate the availability of the
feature.
Preparation
Turn this system on.
Insert the media (l 9) or connect the Bluetooth
®
(l 16) / AirPlay (l 14) compatible device.
Press [CD/RADIO], [iPod/USB] or
[, AUX]
to select
the audio source.
When using iPod/iPhone/iPad, the operation may vary
among those models.
[CD], [USB] To display information
Press [DISPLAY, iPod MENU] repeatedly.
Panasonic bears no responsibility for data and/
or information that is compromised during a
wireless transmission.
[CD] : CD audio in CD-DA format and a CD
that contains MP3 files (l 5)
[iPod] : Compatible iPod/iPhone/iPad (l 5)
[USB] : USB devices containing MP3 files
(l 5)
[AirPlay] : When connected to an AirPlay
compatible device. (l 14)
[Bluetooth] :
Connected Bluetooth
®
device (l 16)
Basic play
([CD], [iPod], [USB], [AirPlay], [Bluetooth])
Play Press [1/;].
Stop Press [].
[USB]: The position is memorised
and “RESUME” is displayed.
Pause Press [1/;].
Press again to restart play.
Skip Press [:/6] or [5/9]
to skip track.
[CD], [USB] Press [3] or [4] to
skip the MP3 album.
Search
(Except [AirPlay])
During play or pause
Press and hold [:/6] or
[5/9].
Point the remote control at the
CD unit to operate.
[iPod] : Backwards search is only
within the current track.
SC-NE5~VQT4U60.book 17 ページ 2013年1月22日 火曜日 午後1時38
18
VQT4U60
To use this system’s remote control with a Bluetooth
®
device,
the Bluetooth
®
device must support AVRCP (Audio Video
Remote Control Profile).
Depending on the device or the status of the device, some
operations may not work.
Maximum number of displayable characters: approx. 30
This system supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data
that is not supported will not be displayed or shown
differently.
Album and track indication for MP3 files.
[iPod] To navigate through the iPod/
iPhone menu
Open the Music App to use this feature with iPod touch/
iPhone.
–[3, 4] : To navigate menu items.
[OK] : To go to the next menu.
[DISPLAY, iPod MENU] : To return to the previous
menu.
Depending on the model (e.g., iPod nano 7th generation,
etc.), it may be necessary to select the album, artist, etc. on
the iPod/iPhone.
Select the playback mode.
1 Press [PLAY MENU] to select “REPEAT”,
“RANDOM” / “SHUFFLE” or “PLAYMODE”.
2 Press [3, 4] to select the setting and then press
[OK].
When using an iPod/iPhone/iPad or Bluetooth
®
device, use
the setting on the device, if available.
During random play, you cannot skip to the previous track.
[CD] : The mode is cancelled when you open the door for
discs.
[AirPlay] : The applied settings will remain until it is changed.
*1: [AirPlay] : Perform the settings during playback.
“A _ _ _”: MP3 album number.
“T _ _ _”: MP3 track number.
“ _ ” stands for the album or track number.
“”:
This indication is also used to refer to an
album.
“”:
This indication is also used to refer to a
track.
Playback modes ([CD], [USB], [AirPlay]*
1
)
REPEAT
[CD] [USB]
OFF Select to cancel repeat playback.
1-TRACK Only plays the selected track.
“1, , `” is displayed.
(Skip to the desired track.)
ALL All tracks are repeated.
`” is displayed.
[AirPlay]
Refer to the connected device to verify the
selected setting.
[CD] [USB] RANDOM
ON Plays the contents randomly.
“RND” is displayed.
“RND” will not be displayed when
“1-TRACK” is selected.
OFF Random playback is turned off.
[AirPlay] SHUFFLE
Refer to the connected device to verify the selected
setting.
[CD] (MP3) [USB] PLAYMODE
ALL Play all MP3 tracks.
1-ALBUM Only plays the selected MP3 album.
“1, ” is displayed.
SC-NE5~VQT4U60.book 18 ページ 2013年1月22日 火曜日 午後1時38
19
VQT4U60
ENGLISH
Listening to the radio
You can preset up to 30 channels.
Preparation
Make sure that the antenna is connected. (l 8)
Turn this system on.
Press [CD/RADIO] repeatedly to select “FM”.
A station previously stored is overwritten when another
station is stored in the same channel preset.
1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
Preparation
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
Press [:/6] or [5/9] to select the channel.
Manual tuning and presetting
Select a radio broadcast.
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “MANUAL” and then press
[OK].
3 Press [:/6] or [5/9] to tune to the
required station.
To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4 While listening to the radio broadcast
Press [OK].
5 Press [3, 4] to select the channel and then press
[OK].
To improve FM sound quality
1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”.
2 Press [3, 4] to select “MONO” and then press
[OK].
This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.
Select “STEREO” in step 2 to return to stereo broadcasts.
“MONO” is cancelled if the frequency is changed.
If “MONO” is selected, regardless of the type of signal this
system is receiving, “FM MONO” is displayed. (l below)
To display the current signal status
Press [PLAY MENU] to display “FM STATUS” and then
press [OK].
To display RDS text data
Press [DISPLAY, iPod MENU] to display the text data.
Each time you press the button:
“STEREO” is displayed when this system tunes to a stereo
broadcast.
This system can display the text data transmitted by the radio
data system (RDS) available in some areas. (RDS displays
may not be available if reception is poor.)
Presetting stations automatically
Listening to a preset channel
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
“FM” is also displayed even if this system is not tuned to
a station.
“PS”: Programme service
“PTY”: Programme type
“FREQ”: Frequency display
SC-NE5~VQT4U60.book 19 ページ 2013年1月22日 火曜日 午後1時38
20
VQT4U60
Sound adjustment
The following sound effects can be added to the audio
output.
1 Press [SOUND] repeatedly to select the effect.
2 Press [3, 4] to select the setting and then press
[OK].
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
Clock and Timer
To make this setting, point the remote control at
the speaker unit.
This is a 24-hour clock.
1 Press [SETUP] to select “CLOCK”.
2 Press [3, 4] to set the time and then press [OK].
To display the clock, press [SETUP] to select “CLOCK” and
then press [OK] once. The time is displayed for 10 seconds.
(During standby, press [DISPLAY, iPod MENU] once.)
The clock is reset when there is a power failure or when the
AC mains lead is removed.
Reset the clock regularly to maintain accuracy.
You can set the timer so this system turns on at a
certain time every day.
Preparation
Set the clock (l left).
Setting the timer
1 Press [SETUP] repeatedly to select “TIMER ADJ”.
2 Press [3, 4] to set the starting time
(“ON TIME”) and then press [OK].
3 Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
Turn the timer on
1 Select the music source*
1
and set the desired
volume.
2 Press [SETUP] repeatedly to select “TIMER SET”.
3 Press [3, 4] to select “SET” and then press [OK].
F” is displayed.
To turn the timer off, select “OFF”.
4 Press [Í] to turn this system off.
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
During standby, if the timer is turned on, press [DISPLAY,
iPod MENU] twice to display the settings.
This system can be used as normal after the timer is set,
however:
Turn this system to standby mode before the timer start
time.
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
If this system is having a wireless communication problem at
the set time, an electronic sound may go off instead of the
set music source. Turn this system off to stop the electronic
sound.
*1: “CD”, “FM”, “AUX”, “IPOD_DOCK” and
“IPOD_PORT” / “USB” can be set as the music source.
The sleep timer can turn this system off after a set
time.
1 Press [SLEEP] repeatedly to set the time (in
minutes) and then press [OK].
“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120”
^------------------------ OFF (Cancel) (------------------------b
The remaining time is indicated on this system’s display
except when other operations are performed.
The play timer and sleep timer can be used together. The
sleep timer always has priority.
Direct-Vocal
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or “OFF”.
The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (j4 to i4).
Dynamic Bass
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
The factory preset is
“ON D.BASS”.
Setting the clock
Play timer
Sleep timer
SC-NE5~VQT4U60.book 20 ページ 2013年1月22日 火曜日 午後1時38
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Panasonic SCNE5EG Instrukcja obsługi

Typ
Instrukcja obsługi