Panasonic SCHC57EG Instrukcja obsługi

Marka: Panasonic

Model: SCHC57EG

Kategoria: Smartwatche

Typ: Instrukcja obsługi

RQT9714-2R

POLSKI ENGLISH

until

2012/03/31

ČESKY

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Dziękujemy za zakupienie tego produktu.

Przed podłączeniem, obsługą lub regulacją sprzętu prosimy o dokładne zapoznanie się z treścią niniejszej

instrukcji.

Prosimy o zachowanie niniejszej instrukcji obsługi.

Děkujeme, že jste si zakoupil tento výrobek.

Dříve, než se pustíte do zapojování a začnete výrobek používat či provádět nastavování, prostudujte si prosím celý

tento návod.

Uschovejte si prosím tento návod k obsluze.

Compact Stereo System

Kompaktowy zestaw stereo

Kompaktní stereo systém

Model No. SC-HC57

Included Installation Instructions (> 2, 6)

The installation should never be done by any other than a qualified installation specialist.

Before commencing work, carefully read these installation instructions and the operating instructions to ensure

that installation is performed correctly.

(Please keep these instructions. You may need them when maintaining or moving this unit.)

Załączone instrukcje instalacji (> 24, 28)

Instalacja może być przeprowadzana wyłącznie przez wykwalifikowanych specjalistów

zajmujących się instalacją.

Przed rozpoczęciem pracy należy się dokładnie zapoznać z instrukcją instalacji oraz z instrukcją obsługi, aby się

upewnić, że instalacja została przeprowadzona prawidłowo.

(Proszę zachować niniejszą instrukcję. Będzie ona potrzebna podczas serwisowania lub przenoszenia

urządzenia.)

Přiložené pokyny k instalaci (> 44, 48)

Instalaci by měl provést kvalifikovaný odborník.

Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a návod k obsluze, abyste instalaci provedli

opravdu správně.

(Tyto pokyny si uschovejte. Můžete je potřebovat při údržbě nebo přesouvání tohoto zařízení.)

SC-HC57EG~RQT9714-2R.book Page 1 Wednesday, April 18, 2012 4:43 PM

RQT9714

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases, on

this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the

plug.

– Do not use a damaged mains plug or socket outlet.

≥ Install this unit so that the AC mains lead can be unplugged

from the socket outlet immediately if any problem occurs.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not recharge,

disassemble, heat above 60

C or incinerate.

≥ Keep the Button-Type battery out of the reach of children.

Never put Button-Type battery in mouth. If swallowed call

your doctor.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of

disposal.

≥ Insert with poles aligned.

≥ Mishandling of batteries can cause electrolyte leakage and

may cause a fire.

– Remove the battery if you do not intend to use the remote

control for a long period of time. Store in a cool, dark

place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

NORSK

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser,

på apparatet.

– Bruk kun anbefalt tilbehør.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til

kvalifisert servicepersonell.

Vekselstrømnett

≥ Strømuttaket må befinne seg i nærheten slik at den lett kan

kobles fra uttaketumiddelbart om det oppstår problemer.

Produkt

≥ Dette produktet anvender en laser. Betjening av kontroller

eller justering eller andre inngrep enn de beskrevet i denne

bruksanvisning kan føre til farlig bestråling.

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate

klimaforhold.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget

kabinett eller et annet lukket sted. Pass på at produktet er

godt ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med

aviser, duker, gardiner eller lignende.

WARNING

CAUTION

ADVARSEL

FORSIKTIG

SC-HC57~RQT9714.book Page 2 Thursday, February 23, 2012 4:13 PM

RQT9714

ENGLISH

Accessories

Product Identification Marking is located on the bottom of

the unit.

Check the supplied accessories before using this unit.

∏ 1 Remote control

(with a battery)

(N2QAYC000057)

∏ 1 AC mains lead

∏ 1 FM indoor

antenna

Wall mounting accessories

∏ 1 Safety holder

∏ 1 Screw

∏ 2 Wall mount

brackets



≥ Do not use AC mains lead with other equipment.

≥ Product numbers provided in this operating instructions are

correct as of January 2012. These may be subject to change.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products and used batteries, please

take them to applicable collection points, in accordance with your national legislation and

the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where

you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

SC-HC57~RQT9714.book Page 3 Thursday, February 23, 2012 4:13 PM

RQT9714

Table of contents

Safety precautions............................................ 2

Accessories....................................................... 3

Playable media.................................................. 4

Control reference guide ................................... 5

Attaching the unit to a wall (optional)............. 6

Connections ...................................................... 8

Inserting or removing media ........................... 8

AirPlay ............................................................... 9

Playback operations........................................11

Listening to the radio ..................................... 13

Internet Radio.................................................. 14

Sound adjustment .......................................... 14

Clock and Timer.............................................. 14

Others .............................................................. 15

Troubleshooting.............................................. 17

Specifications ................................................. 19

Unit and media care........................................ 20

Licenses .......................................................... 20

Playable media

≥ Please be aware that Panasonic accepts no responsibility for

the loss of data and/or information.

(as of January 2012)



≥ Compatibility depends on the software version. Update your

iPod/iPhone to the latest software before using it with this

unit.

≥ Depending on the model, it may be necessary to remove the

iPod/iPhone and select the album, artist, etc. on the iPod/

iPhone.

≥ Be sure to use a dock adapter that is compatible with your

iPod/iPhone. To purchase a dock adapter, consult your iPod/

iPhone dealer. If a dock adapter is not available, insert and

remove the iPod/iPhone with care.

Charging the iPod/iPhone

The iPod/iPhone will start being charged once connected

to this unit.

≥ In standby mode, “IPOD CHARGING” is shown on the main

unit’s display.

≥ Check the iPod/iPhone to see if the battery is fully charged.

(Once fully recharged, additional recharging will not occur.)

≥ A disc with the CD Logo.

≥ This unit can play back discs that conform to the CD-DA

format.

≥ The unit may not be able to play some discs due to the

condition of the recording.

≥ This unit does not guarantee connection with all USB

devices.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This unit supports USB 2.0 full speed.

≥ This unit can support USB devices of up to 32 GB.

≥ Supported format: Files with the extension “.mp3” or “.MP3”.

≥ Compatible compression rate: Between 64 kbps and

320 kbps (stereo).

≥ Depending on how you create the MP3 files, they may not

play in the order you numbered them or may not play at all.

Creating MP3 files on a CD-R/RW

≥ Maximum number of tracks and albums: 999 tracks and 254

albums (Excluding Root folder).

≥ Disc formats: ISO9660 level 1 and level 2 (except for

extended formats).

≥ If the disc includes both MP3 and normal audio data

(CD-DA), the unit plays the type recorded in the inner part of

the disc.

≥ This unit cannot play files recorded using packet write.

Creating MP3 files on a USB device

≥ Maximum number of tracks and albums: 2500 tracks and 254

albums (Excluding Root folder).

≥ Only one memory card will be selected when connecting a

multiport USB card reader, typically the first memory card

inserted.

Operations in these instructions are described

using the remote control, but you can do the

operations with the main unit if the operations

are the same.

Compatible iPod/iPhone for

docking

iPod touch

1st, 2nd, 3rd, and 4th generation

iPod nano

2nd, 3rd, 4th, 5th, and 6th generation

iPod classic

iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G /

iPhone

Compatible CD

Compatible USB devices

Compatible MP3 files

RQT9714~body1_mst.fm Page 4 Thursday, March 8, 2012 11:32 AM

RQT9714

ENGLISH

Control reference guide

Remote control

1 Turn this unit on or off

2 Select the audio source

3 Basic playback control buttons

4 Enter setup menu

5 Enter the iPod/iPhone menu /

Change displayed information

6 Open/close the sliding door

7 Adjust the volume

8 Mute the sound

Mutes the sound. Press again to

cancel. “MUTE” is also cancelled

when the volume is adjusted or the

unit is turned off.

9 Enter playback menu

10 Enter sound menu

11 Selection/OK

∫ Preparation

Remove the insulation sheet A before using.

∫ To replace a button-type battery

1 While pressing the stopper B,

pull out the battery holder.

2 Set the button-type battery with

its (i) mark facing upward and

then put the battery holder back

in place.

Keep the button-type battery out of

reach of children to prevent

swallowing.

Battery type: CR2025 (Lithium battery)

≥ The battery should normally last about 1 year, however this depends on how

frequently the unit is used.

Main unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice

versa.

In standby mode, the unit is still consuming a small

amount of power.

2 Open/close the sliding door (for iPod/iPhone)

3 Select the audio source

4 Basic playback control buttons

5 Adjust the volume (0 (min) to 50 (max))

6 Open/close the sliding door (for discs)

7 WPS pairing button (> 9)

8 Headphone jack

Plug type: ‰3.5 mm stereo

Recommended plug type: Straight Plug

≥ Listening at full volume for long periods may damage

the user’s ears.

≥ Excessive sound pressure from earphones and

headphones can cause hearing loss.

9 USB port

10 Standby indicator

11 Wi-Fi

status indicator

12 Display

13 Sliding door

14 Remote control signal sensor

Distance:

Within approx. 7 m directly in front.

≥ To avoid interference, please do not put any objects in

front of signal sensor.



10 11

12 13

Top view

RQT9714~body1_mst.fm Page 5 Wednesday, March 7, 2012 10:12 AM

RQT9714

Attaching the unit to a wall

(optional)

∫ Supplied accessories

≥ 1 Safety holder

≥ 1 Screw

≥ 2 Wall mount brackets

∫ Commercially available accessories

(not supplied)

≥ 4 Wall mount bracket fixing screws

≥ 1 Safety holder fixing screw

≥ 1 Fall prevention cord

≥ 1 Screw eye



Use screws with a nominal diameter of ‰4 mm, which are

suitable to the material of the wall (e.g., wood, steel, concrete,

etc.)

1 Detach the stand from the unit.

{. Unscrew the fixing screw (2 pieces) at the bottom of the

unit.

{. Gently pull the stand off the unit as illustrated.

≥ Keep the removed screws and stand in a safe place.

2 Measure and mark the position of the wall mount

brackets (Both sides).

{. Use figures below to identify the screwing positions.

The position to attach the wall mount brackets

Space required

Installation accessories

≥ Keep the safety holder out of reach of children to

prevent swallowing.

≥ Keep the screws out of reach of children to prevent

swallowing.

≥ Keep the wall mount brackets out of reach of children

to prevent swallowing.

Safety precautions

Professional installation is required.

The installation should never be done by any

other than a qualified installation specialist.

PANASONIC DISCLAIMS ANY PROPERTY

DAMAGE AND/OR SERIOUS INJURY,

INCLUDING DEATH RESULTING FROM

IMPROPER INSTALLATION OR INCORRECT

HANDLING.

≥ Be sure to install this unit as indicated within

this operating instructions.

Wall mount instructions

Before installation, turn the unit off and disconnect the

AC mains lead from the mains socket.

Before deciding the location to place the unit, be sure

to check that the Wi-Fi

signal strength is sufficient.

(> 9, 16)

Bottom of main unit

Stand

Soft blanket or cloth

Fixing screw

232 mm

12.5 mm

300 mm

247 mm

680 mm

65 mm

232 mm

116 mm

118 mm

480 mm

113 mm

15 mm

SC-HC57~RQT9714.book Page 6 Thursday, February 23, 2012 4:13 PM

RQT9714

ENGLISH

3 Attach the wall mount bracket to the wall with 2

screws (not supplied). (Both sides)

≥ Use a spirit level to ensure both wall mount brackets are

level.

≥ Make sure that the screw used and the wall are strong

enough to support the weight of at least 33 kg.

4 Fix the safety holder onto the unit with the screw

(supplied).

{. Screw tightening torque: 50 N0cm to 70 N0cm.

5 Attach the fall prevention cord (not supplied) to this

unit.

≥ Use a cord that is capable of supporting over 33 kg

(with a diameter of about 1.5 mm).

6 Hook the unit securely onto the wall mount

brackets with both hands.

≥ Connect the FM antenna and the AC mains lead to the

unit before hanging the unit onto the wall. (> 8)

≥ After hanging the unit, release your hand carefully to

confirm the unit sits securely on the wall.

7 Drive the safety holder fixing screw

(not supplied) to secure the safety holder onto the

wall.

≥ Make sure that the screw used and the wall are strong

enough to support the weight of at least 33 kg.

≥ Refer to step 3 for requirements before screwing.

8 Attach the fall prevention cord (not supplied) to the

wall.

≥ Make sure that the screw used and the wall are strong

enough to support the weight of at least 33 kg.

≥ Make sure that the slack of the cord is minimal.

At least 30 mm

‰7.5 mm to

‰9.4 mm

‰4 mm

Wall mount bracket

Screw

(supplied)

Cord (not supplied)

Wall

Safety holder fixing screw

(not supplied)

Safety holder

Fixed to the

wall

Cord (not supplied)

Screw eye (not supplied)

Wall

SC-HC57~RQT9714.book Page 7 Thursday, February 23, 2012 4:13 PM

RQT9714

Connections



≥ These speakers do not have magnetic shielding. Do not

place them near a television, personal computer or other

devices easily influenced by magnetism.

≥ Tape the antenna to a wall or column in a position with the

least amount of interference. (Use an FM outdoor antenna if

radio reception is poor.)

Inserting or removing media



*1: Make sure to tilt the disc so as not to touch the sliding door.

*2: Do not push or pull the dock manually.

*3: When inserting or removing the iPod/iPhone, tilt the dock

slightly by holding the corner of the dock.

≥ Make sure that the unit does not fall when inserting or

removing media.

≥ Be sure to remove the iPod/iPhone from its case.

≥ When moving this unit, be sure to remove all media and turn

this unit to standby mode.

≥ Insert the USB device directly into the USB port. Do not use

any USB extension cable.

≥ Before removing the USB device, select a source other than

“USB”.

ョヮチモワヵ

ヘブ

モヤチリワ」

Adhesive tape

(not supplied)

FM indoor antenna

(supplied)

Connect the AC mains lead after all other connections are complete.

This unit consumes a small amount of AC power (> 19) even when turned off.

To household mains socket

AC mains lead (supplied)

Compatible

iPod/iPhone

(not supplied)

Dock adaptor

(not supplied)

USB device

(not supplied)

RQT9714~body1_mst.fm Page 8 Thursday, March 8, 2012 11:33 AM

RQT9714

ENGLISH

AirPlay

With this feature you can wirelessly stream music to

this unit’s speakers.

∫ Compatible devices (as of January 2012)

AirPlay works with;

≥ iOS 4.2 or later (iPod touch (2nd, 3rd, and 4th

generation), iPhone 4S, iPhone 4, iPhone 3GS,

iPad 2, iPad)

≥ iTunes 10.2 or later (Mac / PC)

To use the AirPlay function, this unit must join the

same wireless network as the compatible device.

Preparation

With this unit there are 2 methods to setup the wireless

connection. Determine which type of wireless network

router you are using and follow the method that

matches your device.

≥ Refer to the operating instructions of the wireless

network router for details.

≥ Turn the unit on.



≥ When performing the network settings, place this unit close

to the wireless router.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

≥ Immediately after this unit is turned on, the network setup

may take longer to start.

≥ This unit cannot join a wireless network using WEP security

settings with “Method 1”. Use “Method 2” to join the wireless

network.

≥ To cancel this setting in the middle, press [Í] to turn off the

unit.

≥ For up to date compatibility information on your Wireless

router refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

∫ Using the WPS Push Button Configuration

(PBC)

1 Press and hold [s WPS] on the unit.

{. “CONNECT” flashes on the display.

(The Wi-Fi

status indicator blinks blue.)

≥ Complete step 2 within 2 mins.

2 Press the WPS button on the wireless router.

{. When a link is established “LINKING” is indicated on

this unit’s display.

{. When the configuration is finished “SUCCESS” is

indicated on this unit’s display. (Wi-Fi

status indicator

lights blue.)

3 Press [OK] on the remote control to complete the

setting.



≥ This unit can also be set using the WPS PIN code.

Replace step 2 of “Method 1” with the following steps.

(Before starting, refer to the wireless network router’s

operating instructions for details on how to enter the PIN

code.)

1 While “CONNECT” is flashing press and hold [s WPS]

again to display the 8 digit PIN code. (Wi-Fi

status

indicator blinks purple.)

2 Enter the PIN code into the wireless router.

≥ To edit this system’s name it is necessary to use “Method 2”.

≥ “FAIL” may be displayed if the connection was not made

within the set time limit. Try the setting again. If “FAIL” is still

displayed, try “Method 2”.

With this method, you will access this unit’s wireless

network settings from the Internet browser of your

compatible device.

≥ The illustrations and explanations are based on an iPhone.

However, the word “iPhone” can be replaced with your

compatible device.

Preparation

≥ Check your home wireless network name

(Network name (SSID)) and password for this

network. This can often be found on the wireless

router itself.

≥ Turn on your iPhone.

(Continues to next page)

*1: WPS stands for “Wi-Fi Protected Setup

”.

Network settings

If you do not know which type of wireless network

router you are using, use “Method 2”.

Method 1

If your wireless network router supports WPS*

WPS Push Button Configuration

(PBC) compatible wireless router

may have this mark.

Method 2

If your wireless network router does not support

WPS*

SC-HC57~RQT9714.book Page 9 Thursday, February 23, 2012 4:13 PM

RQT9714

1 Press [SETUP] on the remote control repeatedly to

select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi

status indicator blinks purple.)

2 Connect your iPhone to this unit’s wireless

network called “Setup _ _ _ _ _ _”*

1, 2

≥ Once “Setup _ _ _ _ _ _” is selected, the iPhone is

connected with this unit.

3 Start Safari on your iPhone and type

“http://192.168.1.12/” into the URL address field

and display the page.

{. This unit’s setup window is displayed.

4 Select “Search wireless network”.

5 Select and input the details.

6 Perform the “Additional settings”. (> right)

If they do not apply, continue to the next step.

7 Select “JOIN” to apply the settings.

{. In the pop-up screen select “OK” to continue.

– Select “CANCEL” to return to the setup window.

{. The wireless status indicator lights blue.

– You can now close the Safari browser.

{. When the configuration is finished “SUCCESS” is

indicated on this unit’s display.

8 Press [OK] on the remote control to complete the

settings.

9 Connect your iPhone back to your home wireless

network.



≥ Enable Java and Cookies in your browser settings.

≥ To cancel this setting in the middle, press [Í] to turn off the

unit.

*1: “ _ ” stands for a digit that is unique to each set.

*2: Make sure that DHCP is enabled for the network setting on

the iPhone.

*3: If you have set your wireless network to be invisible, select

“BACK” and refer to “Alternative settings”. (> above)

[1] Select your home wireless network name.*

[2] Type the password.

[3] Select “NEXT”.

If “FAIL” is displayed press [OK]. Then check the

wireless network password and other settings and

start again from step 1.

Alternative settings

Instead of steps 4 and 5:

Select “Manual settings”.

1 Type your home wireless network name into

the “Network name (SSID)” field.

2 Select the encryption method from the

“Security system” drop down list.

3 Type the password into the “Password” field

and then select “NEXT”.

Additional settings

In step 6:

If your home wireless network has been setup to

use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Select “Advanced network settings”.

{. Input the required addresses into each field and select

“OK”.

≥ To change the settings back to DHCP, select “ON” from

the “DHCP” drop down list.

If you want to change the name of this unit that is

displayed as the AirPlay speakers.

Select “Edit STEREO SYSTEM name”.

{. Only ASCII characters can be used.

{. Type a new name into the “STEREO SYSTEM name”

field and select “OK”.

SC-HC57~RQT9714.book Page 10 Thursday, February 23, 2012 4:13 PM

RQT9714

ENGLISH

When this unit is on the same network as the

compatible device, you can select this unit as the

speakers.

Preparation

≥ Connect this unit to the same network as the

compatible device. (> 9)

≥ Turn on the compatible device.

1 Start iTunes on your Mac/PC or the Music App on

your iOS device.

≥ If the Music App on your iOS device is used,

select the file that is to be played.

2 Select this unit from the AirPlay icon at the

bottom right-hand corner of the display.

{. Check the volume settings before starting the playback.

(When AirPlay is used for the first time, the volume may

be output at the maximum setting.)

≥ If you have not changed the name, this unit will be

displayed as “Panasonic HC57 _ _ _ _ _ _”

1, 2

3 Start play.



≥ This unit can be set to turn on automatically when this unit is

selected as the output speakers. (> 16)

≥ Playback of other audio sources will stop and AirPlay output

will have priority.

≥ Volume changes on the iOS device or iTunes will be applied

to this unit. (Refer to the iTunes Help for the required settings

in iTunes.)

≥ With some iOS and iTunes versions, it may not be possible

to restart the AirPlay playback if the selector is changed

(e.g., “CD”) or the unit is turned off, during the AirPlay

playback.

In this case, select a different device from the AirPlay icon of

the Music App or iTunes and then re-select this unit as the

output speakers.

≥ AirPlay will not work when playing back videos on iTunes.

Playback operations

The following marks indicate the availability of the

feature.

Preparation

≥ Turn the unit on.

≥ Insert the media. (> 8)

≥ Press [CD], [iPod] or [USB] to select the audio

source.

(Continues to next page)

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this unit can be changed

from the “Edit STEREO SYSTEM name” settings in

“Method 2”. (> 10)

Using AirPlay with this

unit’s speakers

e.g., iPhone iOS 5.0

Computer

Multiple Speakers...

Panasonic HC57

------

e.g., iTunes 10.5

(Bottom right)

[CD]: CD audio in CD-DA format and a CD that

contains MP3 files (> 4)

[iPod]: Compatible iPod/iPhone (> 4)

[USB]: USB devices containing MP3 files (> 4)

[AirPlay]:

When connected to an AirPlay compatible

device. (>

left)

Basic play ([CD], [iPod], [USB],

[AirPlay])

Play

([CD], [iPod], [USB]

only)

Press [1/;].

Stop Press [∫].

≥ [USB]: The track is memorises and

“RESUME” is displayed.

Pause Press [1/;].

Press again to restart play.

≥ [AirPlay]: If play does not restart, wait

approx. 10 sec. and try again.

Skip Press [:/6] or [5/9] to

skip track.

[CD], [USB] Press [3] or [4] to skip

the MP3 album.

([CD], [iPod], [USB]

only)

During playback

Press and hold [:/6] or

[5/9].

≥ [iPod]: Backwards search is only

within the current track.

Volume Press [VOL s] or [VOL r] to adjust

the volume.

Mute Press [MUTE] to mute the sound.

SC-HC57~RQT9714.book Page 11 Thursday, February 23, 2012 4:13 PM

RQT9714

∫ [CD], [USB] View contents information

Press [DISPLAY] repeatedly during play or pause.



≥ Maximum number of displayable characters: approx. 30

≥ This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data

that is not supported will not be displayed or shown

differently.

≥ Album and track indication for MP3 files.

∫ [iPod] To navigate through the iPod/iPhone

≥ Open the Music App to use this feature with iPod touch/

iPhone models.

–[3, 4]: To navigate menu items.

– [OK]: To go to the next menu.

– [iPod MENU]: To return to the previous menu.



≥ To view the operation, open the sliding door.

≥ The operation may vary among iPod/iPhone models.

Select the playback mode.

≥ These modes can be combined with random play and the

repeat play feature.

1 Press [PLAY MENU] repeatedly to select

“PLAYMODE”.

2 Press [3, 4] to select the following mode and

press [OK].

3 Press [1/;] to start play.



[CD]: The current play mode is cleared when you open the

sliding door for discs.

Select the playback mode.

≥ This mode can be combined with the playback modes and

the repeat play feature.

∫ When “CD” or “USB” is selected

1 Press [PLAY MENU] repeatedly to select

“RANDOM” and then press [OK].

2 Press [3, 4] to select “ON” and press [OK].

≥ “RND” is displayed.

3 Press [1/;] to start play.

∫ When “AIRPLAY” is selected

1 Press [PLAY MENU] repeatedly to select

“SHUFFLE” and then press [OK].

2 Press [3, 4] to turn shuffle on and press [OK].

≥ [AirPlay]: Refer to the connected device to verify the

selected setting.



≥ [CD], [USB]: During random play, you cannot skip to the

previous track.

≥ [CD]: The current play mode is cleared when you open the

sliding door for discs.

≥ [CD], [USB]: “RND” will not be displayed when “1-TRACK”

(> 13) is selected.

≥ [AirPlay]: Perform the settings during playback.

≥ [AirPlay]: The applied settings will remain until it is changed

on the connected device.

“A _ _ _”: MP3 album number.

“T _ _ _”: MP3 track number.

≥ “ _ ” stands for the album or track number.

“”:

This indication is also used to refer to an album.

“”:

This indication is also used to refer to a track.

Playback modes ([CD], [USB])

DISC Play all MP3 tracks.

1-ALBUM

(“1, ” is

displayed.)

Only plays the selected MP3

album.

Random/shuffle play

([CD], [USB], [AirPlay])

RQT9714~body1_mst.fm Page 12 Thursday, March 1, 2012 3:00 PM

RQT9714

ENGLISH

These modes can be combined with the playback

modes and random play feature.

1 Press [PLAY MENU] repeatedly to select

“REPEAT” and then press [OK].

2 Press [3, 4] to select the following mode and

press [OK].

≥ [AirPlay]: Refer to the connected device to verify the

selected setting.



≥ [CD]: Repeat play is cancelled when you open the sliding

door for discs.

≥ [AirPlay]: Perform the settings during playback.

≥ [AirPlay]: The applied settings will remain until it is changed

on the connected device.

Listening to the radio

You can preset up to 30 channels.

Preparation

Make sure that the FM antenna is connected. (> 8)



A station previously stored is overwritten when another station

is stored in the same channel preset.

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“A.PRESET” and then press [OK].

3 Press [3, 4] to select “LOWEST” or “CURRENT”

and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency

(FM 87.50).

CURRENT:

To begin auto preset with the current frequency.*

* To change the frequency, refer to “Manual tuning and

presetting”.

The tuner starts to preset all the stations it can receive

into the channels in ascending order.

Preparation

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“TUNEMODE” and then press [OK].

3 Press [3, 4] to select “PRESET” and then press

[OK].

1 Press [RADIO] to select “FM”.

2 Press [:/6] or [5/9] to select the

channel.

∫ Manual tuning and presetting

Select a radio broadcast.

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“TUNEMODE” and then press [OK].

3 Press [3, 4] to select “MANUAL” and then press

[OK].

4 Press [:/6] or [5/9] to tune to the

required station.

≥ To start automatic tuning, press and hold [:/6],

[5/9] until the frequency starts scrolling. Tuning

stops when a station is found.

(Continues to next page)

Repeat play ([CD], [USB],

[AirPlay])

OFF Select to cancel repeat playback.

1-TRACK

([CD], [USB]:

“1, , `” is

displayed.)

The selected track is repeated,

(Skip to the desired track (> 11))

ALL

([CD], [USB]:

“`” is

displayed.)

All tracks are repeated.

Presetting stations

automatically

Listening to a preset channel

RQT9714~body1_mst.fm Page 13 Thursday, March 1, 2012 1:55 PM

RQT9714

To preset the channel

5 While listening to the radio broadcast

Press [OK].

6 Press [3, 4] to select the channel and then press

[OK].

∫ To improve FM sound quality

1 While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select “FM MODE”

and then press [OK].

2 Press [3, 4] to select “MONO” and then press

[OK].

≥ This setting can be preset and memorised. To do so,

continue to step 5 of “Manual tuning and presetting”.



≥ Select “STEREO” in step 2 to return to stereo broadcasts.

≥ “MONO” is cancelled if the frequency is changed.

≥ If “MONO” is selected, regardless of the type of signal this

unit is receiving, “FM MONO” is displayed. (> below)

∫ To display the current signal status

Press [PLAY MENU] to display “FM STATUS” and

then press [OK].

“FM ST”: The FM signal is in stereo.

“FM”: The FM signal is in monaural.

≥ “FM” is also displayed even if this unit is not tuned to a

station.

∫ To display RDS text data

Press [DISPLAY] to display the text data.

≥ Each time you press the button:

PS: Programme service

PTY: Programme type

FREQ: Frequency display



≥ “STEREO” is displayed when this unit tunes to a stereo

broadcast.

≥ The unit can display the text data transmitted by the radio

data system (RDS) available in some areas. (RDS displays

may not be available if reception is poor.)

Internet Radio

This unit can output Internet radio if “vTuner for

Panasonic” is installed on your iPhone/iPod touch.

Preparation

≥ Install “vTuner for Panasonic” to your iPhone/iPod

touch.

≥ Install iOS 5.0 or later.

1 Insert the iPhone/iPod touch to this unit.

2 Press [iPod] repeatedly to select “VTUNER”.

{. “vTuner for Panasonic” starts.



≥ Visit the below website for the following information about

“vTuner for Panasonic”:

http://radio.vtuner.com/panasonic/en/

(Compatible iPhone/iPod touch models and software

versions, purchasing, installation and operation details.)

≥ A pop-up screen may appear on your iPhone/iPod touch.

Follow the indicated instructions.

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect and

then press [OK].

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

Clock and Timer

This is a 24-hour clock.

1 Press [SETUP] repeatedly to select “CLOCK” and

then press [OK].

2 Press [3, 4] to set the time and then press [OK].



≥ To display the clock, press [SETUP] repeatedly to select

“CLOCK” and then press [OK] once. The time is displayed for

10 seconds.

(During standby, press [iPod MENU, DISPLAY] once.)

≥ The clock is reset when there is a power failure or when the

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

Direct-Vocal

Surround

(

D.SURROUND

)

“LEVEL 1”, “LEVEL 2” or “OFF”.

≥ The factory preset is “OFF”.

Preset EQ

(PRESET EQ)

“HEAVY” (heavy), “SOFT” (soft),

“CLEAR” (clear), “VOCAL”

(vocal) or “FLAT” (flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or

Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass

(D.BASS)

“ON D.BASS” or

“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

Setting the clock

SC-HC57~RQT9714.book Page 14 Thursday, February 23, 2012 4:13 PM

RQT9714

ENGLISH

You can set the timer so this unit turns on at a certain

time every day.

Preparation

Set the clock (> 14).

∫ Setting the timer

1 Press [SETUP] repeatedly to select

“TIMER ADJ” and then press [OK].

2 Press [3, 4] to set the starting time

(“ON TIME”) and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].



≥ To display the timer settings, press [SETUP] repeatedly to

select “TIMER ADJ” and then press [OK] once.

(During standby, press [iPod MENU, DISPLAY] twice.)

≥ The music source and volume will also be displayed if the

timer is turned on. (> below)

∫ Turn the timer on

1 Select the music source*

and set the desired

volume.

2 Press [SETUP] repeatedly to select

“TIMER SET” and then press [OK].

3 Press [3, 4] to select “SET” and then press [OK].

≥ “F” is displayed.

4 Press [Í] to turn the unit off.



*1: “CD”, “USB”, “IPOD” and “FM” can be set as the music

source.

≥ This unit can be used as normal after the timer is set,

however:

≥ Turn the unit to standby mode before the timer start time.

≥ Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that was

set when the timer was turned on.

≥ To turn the timer off, select “OFF” in step 3.

≥ The unit will turn on at the preset time, with the volume

increasing gradually to the preset level.

The sleep timer can turn the unit off after a set time.

1 Press [SETUP] repeatedly to select “SLEEP” and

then press [OK].

2 Press [3, 4] to set the time (in minutes) and then

press [OK].

“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”

^------------------------. OFF (Cancel) (------------------------J

≥ The remaining time is indicated on the unit’s display except

when other operations are performed.

≥ The play timer and sleep timer can be used together. The

sleep timer always has priority.

Others

As a factory preset, this unit will always turn off

automatically if there is no sound output and no

operation for 30 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”

and then press [OK].

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn automatic standby on, select “ON” in step 2.

≥ This setting cannot be selected when “FM” is the source.

The brightness of this unit’s display can be changed.

1 Press [SETUP] repeatedly to select “DIMMER”

and then press [OK].

2 Press [3, 4] to select “ON” and then press [OK].



To cancel the dimmer, select “OFF” in step 2.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [CD] to select “CD”.

2 Press and hold [CD] on the main unit and [3] on

the remote control until the main unit’s display

shows “REMOTE 2”.

3 Press and hold [OK] and [3] on the remote control

for at least 4 seconds.



To change the mode back to “REMOTE 1”, repeat the steps

above by replacing [3] with [4].

Play timer

Sleep timer

Automatic standby

Display brightness

Changing the main unit and

remote control code

SC-HC57~RQT9714.book Page 15 Thursday, February 23, 2012 4:13 PM

RQT9714

Occasionally, Panasonic may release updated

software for this unit that may add or improve the way

a feature operates. These updates are available free of

charge.

Preparation

Connect this unit to the wireless network. (> 9)

≥ Make sure that the wireless network is connected to the

Internet.

1 Press [SETUP] repeatedly to select

“SW UPDATE” and then press [OK].

2 Press [3, 4] to select “UPDATE? Y” and then

press [OK] to start the update.

{. After the update has finished, “SUCCESS” is displayed.

3 Disconnect the AC mains lead and reconnect it

after 3 minutes.

≥ DO NOT DISCONNECT the AC mains lead while one of

the following messages is displayed.

– “LINKING”, “UPDATING” or “%”

(“  ” stands for a number.)



≥ If you do not want to update the unit, select “UPDATE? N”

and then press [OK] in step 2.

≥ If there are no updates, “NO NEED” is displayed after step 2.

≥ During the update process, no other operations can be

performed.

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

∫ Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.” and then

press [OK].

{. The version of the installed software is displayed.

2 Press [OK] to exit.

To check the Wi-Fi

signal strength where the unit is

located.

Preparation

Connect this unit to the wireless network. (> 9)

1 Press [SETUP] repeatedly to select “SIG.LEVEL”

and then press [OK].

≥ The unit’s display shows “LEVEL ”.

(“  ” stands for a number.)

2 Press [OK] to exit this display mode.



≥ It is recommended to have a signal strength of “3”. Change

the position or angle of your wireless network router or the

unit if the indication is “2” or “1” and see if the connection

improves.

≥ If “LEVEL 0” is displayed, this unit cannot establish a link with

the wireless network router. (> 18)

≥ This function does not work when AirPlay is used.

This unit can turn on automatically from standby mode

when this unit is selected as the AirPlay speakers.

Preparation

Connect this unit to the wireless network. (> 9)

1 Press [SETUP] repeatedly to select “NET STNBY”

and then press [OK].

2 Press [3, 4] to select “ON” and then press [OK].



≥ To cancel this function, select “OFF” in step 2.

≥ The factory preset is “OFF”. If this function is set to “ON” the

standby power consumption will increase.

To check the unit’s IP/MAC address.

1 Press [CD] to select “CD”.

2 Press and hold [s WPS] on the unit and [4] on

the remote control until the unit’s display shows

the IP address.

{. The IP address is partially displayed.

≥ To display the MAC address on the unit, repeat the

steps above by replacing [4] with [3].

3 Press [3, 4] on the remote control to show the

rest of the IP address.



≥ Be sure to remove the disc from the disc tray when checking

the address.

≥ The “ – ” displayed on the top or bottom left of the display

indicate the first and last units respectively.

Software update

Wi-Fi

signal strength

Network standby

IP/MAC Address

SC-HC57~RQT9714.book Page 16 Thursday, February 23, 2012 4:13 PM

RQT9714

ENGLISH

Troubleshooting

Before requesting service, make the following checks.

If you are in doubt about some of the check points, or if

the solutions indicated in the following guide do not

solve the problem, consult your dealer for instructions.

Do you have the latest software installed?

≥ Occasionally, Panasonic may release updated software for this

unit that may add or improve the way a feature operates. (> 16)

Humming heard during play.

≥ An AC mains lead or fluorescent light is near the cords. Keep

other appliances and cords away from this unit’s cables.

MP3 cannot be read.

≥ You may not be able to play MP3 if you have copied a

multi-session disc that has no data between sessions.

≥ When creating a multi-session disc, it is necessary to close the

session.

≥ The amount of data on the disc is too small. Set the amount of

data to above 5 MB.

Incorrect display or play will not start.

≥ Make sure that the disc is compatible with this unit.(> 4)

≥ There is moisture on the lens. Wait for about an hour and then try

again.

No response when [1/;] is pressed.

≥ Disconnect the USB device and then reconnect it. Alternatively,

turn the unit off and on again.

The USB drive or its contents cannot be read.

≥ The USB drive format or its contents is/are not compatible with the

unit. (> 4)

≥ The USB host function of this product may not work with some

USB devices.

Slow operation of the USB flash drive.

≥ Large file size or high memory USB flash drive takes longer time

to read.

The elapsed time displayed is different from the

actual play time.

≥ Copy the data to another USB device or backup the data and

reformat the USB device.

A beat sound or noise is heard while receiving

radio broadcast.

≥ Confirm the FM antenna is properly connected. (> 8)

≥ Adjust the position of the antenna.

≥ Try to keep a certain amount of distance between the antenna and

AC mains lead.

≥ Try to use outdoor antenna if there are buildings or mountains

nearby.

≥ Switch the television or other audio player off or separate it from

the unit.

≥ Keep this unit away from mobile phones if the interference is

apparent.

Cannot charge or operate.

≥ Check that the iPod/iPhone is connected firmly. (> 8)

≥ The battery of the iPod/iPhone is depleted. Charge the iPod/

iPhone, and then operate again.

≥ When unexpected operation occurs while using the iPod/iPhone,

connect the iPod/iPhone again or try to restart the iPod/iPhone.

Cannot connect to the network.

≥ Confirm the network connection and settings. (> 9)

≥ Your wireless network might be set to be invisible. In this case

select “Manual settings” in “Method 2”. (> 10)

≥ This unit cannot join a wireless network using WEP security

settings with the WPS methods (“Method 1”). Use “Method 2” to

join the wireless network. (> 9)

≥ Make sure that the multicast function on the wireless network

router is set to on (enabled).

Cannot connect to the unit.

≥ Make sure that this unit is on the same wireless network as the

device you are trying to use. (> 9)

≥ If “NET STNBY” is set to “OFF”, the AirPlay compatible device

cannot be connected when this unit is off.

≥ Turn off the Wi-Fi

setting on the AirPlay compatible device, set

“NET STNBY” to “OFF” (> 16) and then turn this unit off and on.

Reconnect the compatible device to the Wi-Fi

network and then

select this unit as the AirPlay speakers again.

My wireless network router is WPS PBC

compatible, but the pairing does not work.

≥ If the network is set to be invisible, the push button configuration

does not work. In this case, either make the wireless network

visible while you set up the network for this unit or use “Method 2”.

(> 9)

Playback does not start.

The sound is interrupted.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

≥ Do not place this unit inside a metal cabinet, for it might block the

Wi-Fi

signal.

To return all settings to the factory preset

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at least

3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

main unit, reconnect the AC mains lead.

≥ “--------” appears on the display.

3 Release [Í/I].



All the settings are returned to the factory preset. You will

need to reset the memory items.

Common problems

Disc operations

USB operations

Radio

iPod/iPhone operations

AirPlay operations

SC-HC57~RQT9714.book Page 17 Thursday, February 23, 2012 4:13 PM

RQT9714

≥ Place this unit closer to the wireless network router.

≥ If several wireless devices are simultaneously using the same

wireless network as this unit, try turning off the other devices or

reducing their wireless network usage.

≥ If the playback stops, check the playback status on the iOS device

or iTunes.

≥ If play does not start (even though the Wi-Fi

status indicator

lights blue and the AirPlay icon is displayed), restart the

wireless network router, turn the Wi-Fi

connection on the iOS

device or Mac/PC off and on, and then make sure that your home

wireless network is selected.

≥ If the AirPlay icon is not displayed even if Wi-Fi

status

indicator lights blue, try restarting the wireless network router.

≥ With some iOS and iTunes versions, it may not be possible to

restart the AirPlay playback if the selector is changed (e.g., “CD”)

or the unit is turned off, during the AirPlay playback.

In this case, select a different device from the AirPlay icon of the

Music App or iTunes and then re-select this unit as the output

speakers. (> 11)

The remote control doesn't work properly.

≥ The remote control and this unit are using a different code.

(> right, “REMOTE ”)

The following messages or service numbers may

appear on the unit's display.

“--:--”

≥ You plugged the AC mains lead in for the first time or there was a

power failure recently. Set the time (> 14).

“ADJUST CLOCK”

≥ Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

≥ Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

≥ The unit has been left unused for about 30 minutes and will shut

down in a minute. Press any button to cancel it.

“CANNOT DISPLAY”

≥ The Wi-Fi

signal strength cannot be displayed if “AIRPLAY” is the

selected source. Stop the AirPlay playback, select a different

source (e.g., “CD”) and try again. (> 16)

“CANNOT SET”

≥ Select an audio source other than “AIRPLAY” or “VTUNER”.

“CHECKING CONNECTION”

≥ The unit is checking the connected iPod/iPhone. If this display

keeps appearing, make sure that iPod/iPhone is inserted correctly

and try again (> 8).

“DL ERROR”

≥ The software download has failed. Press any button to exit.

Please try again later.

≥ The server cannot be found. Press any button to exit. Make sure

that the wireless network is connected to the Internet.

“ERROR”

≥ Incorrect operation is performed. Read the instructions and try

again.

“F61”

≥ There is a power supply problem. Consult the dealer.

“FAIL”

≥ Updating or setting has failed. Read the instructions and try again.

“ILLEGAL OPEN”

≥ Sliding door is not in correct position. Turn the unit off and on

again. If this display appears again, consult the dealer.

“IPOD OVER CURRENT ERROR”

≥ The iPod/iPhone is drawing too much power. Remove the iPod/

iPhone and turn the unit off and on again.

“LEVEL 0”

≥ There is no link between this unit and the wireless network router.

Try the following operations:

– Check that the wireless network router is turned on.

– Turn this unit off and on again.

– Reset the wireless network settings. (> 9)

If the problem persists, consult your dealer.

“NOCONNECT”

≥ This unit cannot connect to the network.

Check the network connection. (> 9)

“NODEVICE”

≥ The iPod/iPhone device is not inserted correctly. Read the

instructions and try again (> 8).

≥ The USB device is not inserted. Check the connection.

“NO DISC”

≥ Insert the disc to be played (> 8).

“NO PLAY”

≥ A CD that is not in CD-DA or MP3 format is inserted. It cannot be

played.

≥ If there are more than 255 albums or folders (audio and

non-audio), some of the MP3 files in these albums may not be

read and played. Transfer these music albums to another USB.

Alternatively, reformat the USB device and save these music

albums prior to saving the other non-audio folders.

“NOT SUPPORTED”

≥ You have inserted an iPod/iPhone that cannot be played (> 4).

Insert correctly and try again if iPod/iPhone is compatible.

≥ If the iPod/iPhone is compatible, turn it on before inserting it to this

unit.

“READING”

≥ The unit is checking the CD information. After this display has

disappeared, start operating.

“START ERROR”

≥ Check the iPhone/iPod touch.

Visit the below website for more information:

http://radio.vtuner.com/panasonic/en/

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes. Change

the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK] and

[4] for more than 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and

[3] for more than 4 seconds.

“USB OVER CURRENT ERROR”

≥ The USB device is drawing too much power. Switch to “CD”

mode, remove the USB and turn the unit off.

Remote control

Messages

RQT9714~body1_mst.fm Page 18 Wednesday, March 7, 2012 9:50 AM

RQT9714

ENGLISH

Specifications

∫ GENERAL

∫ AMPLIFIER SECTION

∫ TUNER SECTION

∫ TERMINAL SECTION

∫ DISC SECTION

∫ SPEAKER SYSTEM SECTION

∫ Wi-Fi

/ AirPlay SECTION



≥ Specifications are subject to change without notice.

Mass and dimensions are approximate.

≥ Total harmonic distortion is measured by a digital spectrum

analyzer.

Power consumption 29 W

Power consumption in standby mode

Approx. 0.2 W

Power consumption in standby mode

(When “NET STNBY” is “ON”)

Approx. 11 W

Power supply AC220Vto240V,50Hz

Dimensions (WkHkD)

480 mmk197 mmk84 mm

(Depth without stand 75 mm)

Mass Approx. 2.6 kg

Operating temperature range 0 oC to r40 oC

Operating humidity range

35 % to 80 % RH (no condensation)

Output power

RMS Output Power Stereo mode

Front Ch (both ch driven)

20 W per channel (6 ≠), 1 kHz, 10 % THD

Total RMS Stereo mode power 40 W

Preset Memory FM 30 stations

Frequency Modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 ≠ (unbalanced)

USB Port

USB Standard USB 2.0 full speed

Media file format

support

MP3 (¢.mp3)

USB device file system FAT12, FAT16, FAT32

USB port power DC OUT 5 V 500 mA MAX

iPod Connector DC OUT 5V1.0AMAX

Phone jack

Terminal Stereo, ‰3.5 mm jack

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3*)

* MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 790 nm (CD)

Laser power CLASS 1

[NORSK]

Bølgelengde 790 nm (CD)

Laserstyrke Klasse 1

Ingen farlig stråling sendes ut

(med sikkerhets-beskyttelse)

Audio output (Disc)

Number of channels 2 ch (FL, FR)

Type

1 way, 1 speaker system (Passive Radiator)

Speaker unit(s)

Full range

6.5 cm Cone typek1 per channel

Passive Radiator 8cmk2 per channel

Impedance 6 ≠

Wi-Fi

WLAN Standards IEEE802.11b/g

Frequency range

2.4 GHz band

Security WEP, WPA

, WPA2

WPS version Version 2.0 (WEP not support)

SC-HC57~RQT9714.book Page 19 Thursday, February 23, 2012 4:13 PM

RQT9714

Unit and media care

Pull out the AC mains lead from the outlet before

maintenance.

∫ Clean this unit with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water tightly to

wipe the dirt, and then wipe it with a dry cloth.

≥ When cleaning the speaker covers, use a fine cloth.

Do not use tissues or other materials (towels, etc.) that can

fall apart. Small grains may get stuck inside the speaker

cover.

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

∫ Maintenance of the lens

∫ Clean discs

Wipe with a damp cloth and then wipe dry.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use record cleaning sprays, benzine, thinner, static

electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or

labels (rented discs etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the

unit. If you discard this unit either by disposal or

transfer, then follow the procedure to return all the

settings to the factory presets to delete the user

settings. (> 17, “To return all settings to the factory

preset”)

≥ The operation history may be recorded in the

memory of this unit.

Licenses

≥ Clean the lens regularly to prevent malfunctions. Use a

blower to remove dust and a cotton swab if it is extremely

dirty.

≥ You cannot use a CD type lens cleaner.

≥ Do not leave the sliding door open for prolonged periods

of time. This will cause the lens to get dirty.

≥ Be careful not to touch the lens with your fingers.

DO DO NOT

Lens

“Made for iPod” and “Made for iPhone” mean that an

electronic accessory has been designed to connect

specifically to iPod, or iPhone, respectively, and has been

certified by the developer to meet Apple performance

standards.

Apple is not responsible for the operation of this device or

its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, or

iPhone may affect wireless performance.

AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic,

iPod nano, and iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

The Wi-Fi CERTIFIED Logo is a certification mark of the

Wi-Fi Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi

Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are

marks or registered marks of the Wi-Fi Alliance.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

SC-HC57EG~RQT9714-2R.book Page 20 Wednesday, April 18, 2012 4:43 PM

Strona się ładuje...

Panasonic SCHC57EG Instrukcja obsługi

Marka: Panasonic

Model: SCHC57EG

Kategoria: Smartwatche

Typ: Instrukcja obsługi

Pobierz PDF

raport

w innych językach

slovenčina: Panasonic SCHC57EG Návod na používanie
English: Panasonic SCHC57EG Operating instructions

Panasonic SCHC57EG Instrukcja obsługi

Panasonic SCHC57EG Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty