Directions below are for installation into drywall. If installing product into a stud, use the

wood screws only.

1. Position the mounting template on the wall in the desired location.

2. Using a level, align the template and tape it to the wall.

3. Drill tw o 5/16” holes at each mounting post location that corresponds to your

product. (We recommend using the horizontal holes for drywall installation).

4. Remove the template from the wall.

5. Fold ends of the plastic toggle together and insert into each hole in the wall.

10. Tighten screws.

11. Assemble the towel bar and posts.

12. While assembled, position each end post with setscrews facing down and place over

both mounting posts. Tighten the setscrew at the bottom of each post.

25300 AL MOEN DRIVE  NORTH OLMSTED, OH 44070

CORPORATE HEADQUARTERS: (800) 321-8809  FAX: (800) 848-6636

INTERNATIONAL: (440) 962-2000  FAX: (440) 962-2726

CUSTOMER SERVICE (USA): 800-882-0116  FAX: (888) 379-2720