Panasonic RCDC1EG Instrukcja obsługi

Operating Instructions

Instrucciones de funcionamiento

Instrukcja obsługi

Návod k obsluze

Инструкция по эксплуатации

Інструкція з експлуатації

Clock Radio

Radio reloj

Radiobudzik

Radiobudík

Радио-часы

Радіо-годинник

Model No. RC-DC1

EG

RQTX1209-2E

RQTX1209-2E_1gb.indd 1RQTX1209-2E_1gb.indd 1 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

RQTX1209

2

ENGLISH

2

NEDERLANDS

ENGLISH

Dear Customer

Thank you for purchasing this product.

For optimum performance and safety, please read

these instructions thoroughly before connecting,

operating or adjusting this product.

Keep this manual for future reference.

CAUTION!

• DO NOT INSTALL OR PLACE THIS UNIT IN

A BOOKCASE, BUILT-IN CABINET OR IN

ANOTHER CONFINED SPACE. ENSURE THE

UNIT IS WELL VENTILATED. TO PREVENT

RISK OF ELECTRIC SHOCK OR FIRE HAZARD

DUE TO OVERHEATING, ENSURE THAT

CURTAINS AND ANY OTHER MATERIALS DO

NOT OBSTRUCT THE VENTILATION VENTS.

• DO NOT OBSTRUCT THE UNIT’S

VENTILATION OPENINGS WITH

NEWSPAPERS, TABLECLOTHS, CURTAINS,

AND SIMILAR ITEMS.

• DO NOT PLACE SOURCES OF NAKED

FLAMES, SUCH AS LIGHTED CANDLES, ON

THE UNIT.

• DISPOSE OF BATTERIES IN AN

ENVIRONMENTALLY FRIENDLY MANNER.

THIS UNIT IS INTENDED FOR USE IN MODERATE

CLIMATES.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PRODUCT DAMAGE,

• DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS,

SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

• USE ONLY THE RECOMMENDED

ACCESSORIES.

• DO NOT REMOVE THE COVER (OR BACK);

THERE ARE NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This product may receive radio interference

caused by mobile telephones during use. If such

interference is apparent, please increase separation

between the product and the mobile telephone.

The socket outlet shall be installed near the

equipment and easily accessible.

The mains plug of the power supply cord shall

remain readily operable.

To completely disconnect this apparatus from the AC

Mains, disconnect the power supply cord plug from

AC receptacle.

Product identiﬁ cation marking

Product Location

Main unit Bottom

AC adaptor Bottom

RQTX1209-2E_1gb.indd 2RQTX1209-2E_1gb.indd 2 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

ENGLISH

RQTX1209

3

SUOMI

VAROITUS!

• ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA

KABINETTITYYPPISEEN KIRJAKAAPPIIN

TAI MUUHUN SULJETTUUN TILAAN, JOTTA

TUULETUS ONNISTUISI. VARMISTA, ETTÄ

VERHO TAI MIKÄÄN MUU MATERIAALI

EI HUONONNA TUULETUSTA, JOTTA

VÄLTETTÄISIIN YLIKUUMENEMISESTA

JOHTUVA SÄHKÖISKU- TAI

TULIPALOVAARA.

• ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA

SANOMALEHDELLÄ, PÖYTÄLIINALLA,

VERHOLLA TAI MUULLA VASTAAVALLA

ESINEELLÄ.

• ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI

MUUTA AVOTULEN LÄHDETTÄ LAITTEEN

PÄÄLLE.

• HÄVITÄ PARISTOT LUONTOA

VAHINGOITTAMATTOMALLA TAVALLA.

TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI

LEUDOSSA ILMASTOSSA.

VAROITUS:

VÄHENNÄ TULIPALON, SÄHKÖISKUN TAI

LAITTEISTON VAHINGOITTUMISEN VAARAA

• TÄTÄ LAITETTA EI SAA ALTISTAA SATEELLE,

KOSTEUDELLE, ROISKEILLE TAI TIPPUVILLE

NESTEILLE. LAITTEEN PÄÄLLE EI SAA

MYÖSKÄÄN ASETTAA MITÄÄN NESTEELLÄ

TÄYTETTYÄ ESINETTÄ, KUTEN MALJAKKOA.

• KÄYTÄ VAIN SUOSITELTUJA

LISÄVARUSTEITA.

• ÄLÄ IRROTA KANTTA (TAI TAUSTAA).

SISÄLLÄ EI OLE KÄYTTÄJÄN

HUOLLETTAVISSA OLEVIA OSIA. HUOLLON

SAA SUORITTAA VAIN AMMATTITAITOINEN

HENKILÖKUNTA.

Pistorasia tulee asentaa laitteen lähelle

helppopääsyiseen paikkaan.

Verkkojohdon pistokkeen on oltava aina helposti

käytettävissä.

Tämä laite voidaan kytkeä kokonaan irti

verkkovirrasta irrottamalla verkkojohdon pistoke

pistorasiasta.

RQTX1209-2E_1gb.indd 3RQTX1209-2E_1gb.indd 3 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

RQTX1209

4

ENGLISH

4

NEDERLANDS

ENGLISH

NORSK

ADVARSEL!

• APPARATET MÅ IKKE PLASSERES I EN

BOKHYLLE, ET INNEBYGGET KABINETT

ELLER ET ANNET LUKKET STED HVOR

VENTILASJONSFORHOLDENE ER

UTILSTREKKELIGE. SØRG FOR AT

GARDINER ELLER LIGNENDE IKKE

FORVERRER VENTILASJONSFORHOLDENE,

SÅ RISIKO FOR ELEKTRISK SJOKK ELLER

BRANN FORÅRSAKET AV OVERHETING

UNNGÅS.

• APPARATETS VENTILASJONSÅPNINGER

MÅ IKKE DEKKES TIL MED AVISER,

BORDDUKER, GARDINER OG LIGNENDE.

• PLASSER IKKE ÅPEN ILD, SLIK SOM

LEVENDE LYS, OPPÅ APPARATET.

• BRUKTE BATTERIER MÅ KASSERES UTEN

FARE FOR MILJØET.

DETTE APPARATET ER BEREGNET TIL BRUK

UNDER MODERATE KLIMAFORHOLD.

ADVARSEL:

FØLG NEDENSTÅENDE INSTRUKSER FOR Å

REDUSERE RISIKOEN FOR BRANN, ELEKTRISK

STØT OG SKADE PÅ PRODUKTET:

• DETTE APPARATET MÅ IKKE UTSETTES FOR

REGN, FUKTIGHET, DRYPP ELLER SPRUT,

OG INGEN VÆSKEFYLTE GJENSTANDER,

SOM F.EKS. VASER, MÅ PLASSERES PÅ

APPARATET.

• BRUK KUN ANBEFALT TILBEHØR.

• IKKE FJERN DEKSELET (ELLER BAKSIDEN);

APPARATET INNEHOLDER INGEN DELER

SOM KAN SKIFTES ELLER REPARERES AV

BRUKEREN. OVERLAT TIL KVALIFISERTE

SERVICETEKNIKERE Å UTFØRE SERVICE.

Strømuttaket må beﬁ nne seg i nærheten av utstyret

og være lett tilgjengelig.

Støpslet på strømkabelen må være klart til bruk.

Når dette apparatet skal kobles helt fra strømnettet

(AC), må støpslet på strømkabelen trekkes ut av

stikkontakten.

RQTX1209-2E_1gb.indd 4RQTX1209-2E_1gb.indd 4 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

ENGLISH

RQTX1209

5

Foreign matter

Do not let metal objects fall inside the unit. This can

cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause

electric shock or malfunction. If this occurs,

immediately disconnect the unit from the power supply

and contact your dealer.

Do not spray insecticides onto or into the unit. They

contain ﬂ ammable gases which can ignite if sprayed

into the unit.

Service

Do not attempt to repair this unit by yourself. If sound

is interrupted, indicators fail to light, smoke appears,

or any other problem that is not covered in these

instructions occurs, disconnect the AC adaptor and

contact your dealer or an authorised service centre.

Electric shock or damage to the unit can occur if the

unit is repaired, disassembled or reconstructed by

unqualiﬁ ed persons.

Extend operating life by disconnecting the unit from the

power source if it is not to be used for a long time.

Safety precautions

Placement

Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and

excessive vibration. These conditions can damage the

cabinet and other components, thereby shortening the

unit’s service life.

Place it at least 15 cm away from wall surfaces to avoid

distortion and unwanted acoustical effects.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can

overload the unit and cause a ﬁ re.

Do not use a DC power source. Check the source

carefully when setting the unit up on a ship or other

places where DC is used.

AC adaptor protection

Ensure the AC adaptor is connected correctly and

not damaged. Poor connection and lead damage can

cause ﬁ re or electric shock. Do not pull, bend, or place

heavy items on the lead.

Grasp the plug ﬁ rmly when unplugging the adaptor.

Pulling the AC adaptor can cause electric shock.

Do not handle the plug with wet hands. This can cause

electric shock.

RQTX1209-2E_1gb.indd 5RQTX1209-2E_1gb.indd 5 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

RQTX1209

6

ENGLISH

6

NEDERLANDS

ENGLISH

Information for Users on Collection and

Disposal of Old Equipment and used

Batteries

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries should

not be mixed with general household

waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and

batteries correctly, you will help to save

valuable resources and prevent any

potential negative effects on human

health and the environment which could

otherwise arise from inappropriate waste

handling.

For more information about collection and

recycling of old products and batteries,

please contact your local municipality,

your waste disposal service or the point

of sale where you purchased the items.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact your

dealer or supplier for further information.

[Information on Disposal in other

Countries outside the European

Union]

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the

correct method of disposal.

Note for the battery symbol (bottom

two symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

RQTX1209-2E_1gb.indd 6RQTX1209-2E_1gb.indd 6 7/7/2010 10:41:37 AM7/7/2010 10:41:37 AM

ENGLISH

RQTX1209

7

Supplied accessories

Please check and identify the supplied accessories.

1 AC adaptor

Compatible iPod and iPhone

• iPod nano 5th generation (video camera) (8GB, 16GB)

• iPod touch 2nd generation (8GB, 16GB, 32GB, 64GB)

• iPod classic [120GB, 160GB (2009)]

• iPod nano 4th generation (video) (8GB, 16GB)

• iPod classic (160GB) (2007)

• iPod touch 1st generation (8GB, 16GB, 32GB)

• iPod nano 3rd generation (video) (4GB, 8GB)

• iPod classic (80GB)

• iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)

• iPod 5th generation (video) (60GB, 80GB)

• iPod 5th generation (video) (30GB)

• iPod nano 1st generation (1GB, 2GB, 4GB)

• iPod 4th generation (colour display) (40GB, 60GB)

• iPod 4th generation (colour display) (20GB, 30GB)

• iPod 4th generation (40GB)

• iPod 4th generation (20GB)

• iPod mini (4GB, 6GB)

• iPhone 3GS (16GB, 32GB)

• iPhone 3G (8GB, 16GB)

• iPhone (4GB, 8GB, 16GB)

Compatibility depends on the software version of your iPod or

iPhone.

Table of contents

Safety precautions .......................................................5

Supplied accessories ...................................................7

Compatible iPod and iPhone .......................................7

Overview of controls ....................................................8

Making the connections ...............................................9

Setting the clock ...........................................................9

Using an iPod or iPhone ............................................10

Using the radio ...........................................................10

Using the sleep timer .................................................11

Using the alarm ...........................................................11

Using the Memory Loader application .....................12

Memory back-up battery ............................................13

Troubleshooting guide ...............................................14

Speciﬁ cations .............................................................15

Maintenance ................................................................ 15

“Made for iPod” and “Made for iPhone” mean that an

electronic accessory has been designed to connect

speciﬁ cally to iPod, or iPhone, respectively, and has been

certiﬁ ed by the developer to meet Apple performance

standards.

Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are

trademarks of Apple Inc., registered in the U.S. and other

countries.

RQTX1209-2E_1gb.indd 7RQTX1209-2E_1gb.indd 7 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

RQTX1209

8

ENGLISH

8

NEDERLANDS

ENGLISH

Overview of controls

A [SNOOZE/DIMMER]

Snooze: To stop the alarm for 9 minutes.

Dimmer: To adjust the display panel’s brightness

(High (default), Medium or Low).

B [ALARM OFF]

To turn off the alarm.

C [ALARM 1], [ALARM 2]

To activate either alarm 1 or alarm 2 function.

To display alarm 1 or alarm 2 setting.

D [SLEEP]

To activate sleep function.

To activate daylight saving time (summer time) in clock

mode.

E [2 /–, ADJ], [+/6, ADJ]

To adjust clock, radio and alarm settings.

To skip to previous or next track.

To backward or forward search through a track.

F [SET/PRESET]

To set the clock.

To perform automatic presetting or to view preset channels

in radio mode.

G [TIME SYNC]

To synchronise the main unit with an iPod or iPhone’s time.

H [+, VOL], [–, VOL]

To adjust the volume.

To select a 12-hour or 24-hour clock display.

I [

4/9

]

To start music playback from an iPod or iPhone and to

pause during playback.

J [SOURCE]

To select clock, “IPOD” or “RADIO FM” mode.

A

B

C

D

E

F

G

HIJ

RQTX1209-2E_1gb.indd 8RQTX1209-2E_1gb.indd 8 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

ENGLISH

RQTX1209

9

Making the connections

Rear view

To household

mains socket

FM indoor antenna

Connect the AC adaptor.

• Do not use an AC adaptor from other equipment.

• Do not use any other AC adaptors except the supplied one.

• The unit is in the standby condition when the AC adaptor is

connected. The primary circuit is always “live” as long as the

AC adaptor is connected to an electrical outlet.

Setting the clock

The clock is displayed once the main unit is connected to the

household mains socket.

Reset the clock regularly to maintain accuracy (monthly

accuracy

+

/– 60 seconds).

1

Press and hold [SET/PRESET] for 2 seconds.

2

Press [2 /–, ADJ] or [+/6, ADJ] to select the day.

3

Press [SET/PRESET] again to conﬁ rm.

4

Repeat steps 2 and 3 to set the hour and minute.

Example:

To change the clock display

In clock mode, press and hold [+, VOL] and [–, VOL] at the

same time for 2 seconds to select between a 12-hour or 24-hour

display.

For 12-hour display:

AM : “PM” is not displayed.

PM : “PM” is displayed.

Daylight saving time (summer time)

In clock mode, press and hold [SLEEP] to activate or cancel

daylight saving time (summer time) function.

“DST” is displayed when the function is activated.

Synchronising clock with iPod or iPhone time

This function allows you to set the clock’s time to be the same

time as your iPod or iPhone’s time (

Z page 7,

“Compatible iPod

and iPhone”).

Press [TIME SYNC] while an iPod or iPhone is docked unto

the main unit.

Note:

• Exact synchronisation of an iPod or iPhone with the main

unit is not possible. There could be a difference of up to

59 seconds between them.

• Compatibility depends on the software version of your iPod

or iPhone.

RQTX1209-2E_1gb.indd 9RQTX1209-2E_1gb.indd 9 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

RQTX1209

10

ENGLISH

10

NEDERLANDS

ENGLISH

Using the radio

Manual tuning

1

Press [SOURCE] to select “RADIO FM”.

2

Press [2 /–, ADJ] or [+/6, ADJ] to select the desired

frequency.

To tune automatically

Press and hold [2/–, ADJ] or [+/6, ADJ] until the frequency

starts changing rapidly. Automatic tuning stops when it ﬁ nds a

station or when [2 /–, ADJ] or [+/6, ADJ] is pressed again.

Note:

For better reception, extend and change the direction of the FM

antenna.

Using an iPod or iPhone

1

Pull out the iPod or iPhone support.

Adjust the support according to the height of your iPod or

iPhone.

iPod cl

assic

iPhone

iPod tou

ch

iPod n

ano

Gently pull out the

iPod or iPhone

support.

iPod

(not included)

2

Connecting an iPod or iPhone.

Hold the main unit when connecting or disconnecting the

iPod or iPhone.

Note:

When docking an iPod touch or iPhone for the ﬁ rst time, a

message will be displayed on your iPod touch or iPhone if the

Memory Loader application has not been installed (Z page 12).

Charging an iPod or iPhone

The iPod or iPhone charges automatically when connected to

the main unit.

• See iPod or iPhone display to check its charging status.

• If the iPod or iPhone is not being used for an extended period

of time after charging has completed, disconnect it from the

main unit, as the battery will be depleted naturally. (Once fully

charged, additional charging will not occur.)

Playing an iPod or iPhone

1

Place an iPod or iPhone in the dock and turn it on.

2

Press [SOURCE] to select “IPOD”.

3

Press [

4/9

] once to start music playback from the iPod

or iPhone. Press again to pause playback.

4

Press [2 /–, ADJ] or [+/6, ADJ] to skip to the

previous or next track.

5

Press and hold [2 /–, ADJ] or [+/6, ADJ] to

backward or forward search through a track.

Note:

• If the iPod or iPhone automatically shufﬂ es or skip a track;

– Turn off its “Shake” feature (if there is any).

– Play the iPod or iPhone using an iPod or iPhone dock

adaptor (not included).

• For iPod or iPhone operation details, refer to iPod or iPhone’s

User Guide.

RQTX1209-2E_1gb.indd 10RQTX1209-2E_1gb.indd 10 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

ENGLISH

RQTX1209

11

Using the alarm

You can set two different alarm times. Before setting the alarm,

make sure to set the clock (

Z page 9,

“Setting the clock”).

Setting the alarm

1

Press and hold [ALARM 1] or [ALARM 2] until the hour

display blinks.

2

Within 10 seconds, press [2 /–, ADJ] or [+/6, ADJ]

to set the hour.

3

Press [ALARM 1] or [ALARM 2] to conﬁ rm.

4

Repeat steps 2 and 3 to set the minutes.

5

Press [2 /–, ADJ] or [+/6, ADJ] to select the days

of the week:

MON-SUN (everyday) ] MON-FRI (weekdays)

SAT-SUN (weekend)SAT-SUN (weekend)

6

Press [ALARM 1] or [ALARM 2] to conﬁ rm.

7

Press [2 /–, ADJ] or [+/6, ADJ] to select the desired

alarm mode: “IPOD”, “RADIO” or “BUZZER”.

8

Press [ALARM 1] or [ALARM 2] to conﬁ rm.

“IPOD” selection: Continue with steps 9 and 10.

“RADIO” selection: Continue from steps 11 to 14.

Setting iPod alarm

9

Press [2 /–, ADJ] or [+/6, ADJ] to adjust the

volume level.

10

Press [ALARM 1] or [ALARM 2] to conﬁ rm the setting.

Note:

• The buzzer will sound if no iPod or iPhone is detected at the

set alarm time.

• Music will be played from the iPod or iPhone’s library when

the alarm sounds.

Memory preset

You may store your favourite channels in 5 FM preset channels.

Preparation

Press [SOURCE] to select “RADIO FM”.

Automatic presetting (AP)

Press and hold [SOURCE] until “AP” is displayed.

Note:

• Automatic presetting begins from the current frequency.

• Only the ﬁ rst 5 stations detected will be stored.

• “AP” will blink continuously until all 5 channels have been set.

Manual presetting

1

Press [2 /–, ADJ] or [+/6, ADJ] to select the desired

frequency.

2

Press and hold [SET/PRESET] for 2 seconds to display

the preset number.

3

Press [2 /–, ADJ] or [+/6, ADJ] to select a preset

number.

4

Press [SET/PRESET] again to conﬁ rm.

Tuning in to a preset channel

Press [SET/PRESET] to switch between preset channels.

(Continued on next page)

Using the sleep timer

This function enables you to turn off the unit automatically after

the set time (only in iPod and radio mode).

1

Press [SLEEP] to activate the timer.

2

Press [SLEEP] again to select your desired time

(in minutes).

OFF (default)

]

30

]

60

]

90

]

120

Note:

Press [SLEEP] once to check the remaining time.

RQTX1209-2E_1gb.indd 11RQTX1209-2E_1gb.indd 11 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

RQTX1209

12

ENGLISH

12

NEDERLANDS

ENGLISH

Setting radio alarm

11

Press [2 /–, ADJ] or [+/6, ADJ] to adjust the

volume level.

12

Press [ALARM 1] or [ALARM 2] to conﬁ rm.

13

Press [2 /–, ADJ] or [+/6, ADJ] to select the

desired preset channel.

14

Press [ALARM 1] or [ALARM 2] to conﬁ rm the setting.

Note:

• Alarm will function only when powered by AC power.

• To activate or display the alarm setting, press [ALARM 1] or

[ALARM 2] once.

• Press [ALARM 1] or [ALARM 2] again to deactivate the alarm

function.

Turning off the alarm

Press [ALARM OFF] to turn off the alarm.

The alarm will sound at the same time on the next day.

Note:

If the alarm is not turned off, it will sound continuously for

59 minutes before turning off by itself.

Snoozing the alarm

Press [SNOOZE] when the alarm sounds to stop it for a few

minutes.

The alarm will sound again after 9 minutes.

Tip:

For iPod touch and iPhone users, use the Memory Loader

application to unlock custom alarm settings (Z see right).

Using the Memory Loader application

This main unit is designed to operate with the Memory Loader

application which can be downloaded from the App Store

(search for MemoryLoader).

If you have not already downloaded the free Memory Loader

application, you will see the following message on your iPod

touch or iPhone display:

Application Not Installed

This accessory requires an

application you do not have

installed. Would you like to install it

from the App store?

This message is a reminder for you to download the application

in order to enjoy the enhanced features of this main unit.

However, your iPod touch and iPhone will work properly with

this main unit even without the Memory Loader application

installed.

The Memory Loader application only works with iPod touch and

iPhone running on OS 3.0 or later.

Once the Memory Loader application is installed into your

iPod touch or iPhone, the following functions can be easily

accessible and controlled directly through the application’s

platform.

Alarm

• Adjust alarm 1 and alarm 2 settings easily.

• You may select any combination of days for the alarm to

sound.

• You can choose your desired snooze settings from a choice

of 1 to 30 minutes.

Radio

• Preset 5 FM channels by scrolling through your desired

frequencies by using the picker.

Events

• You can be alerted of dates stored on your iPod touch or

iPhone contacts (if the alarm is set to sound on that day).

RQTX1209-2E_1gb.indd 12RQTX1209-2E_1gb.indd 12 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

ENGLISH

RQTX1209

13

Memory back-up battery

The back-up battery (CR2032, not included) saves the clock

and alarm settings in the event of a power interruption.

Inserting the battery

When there is no battery, the battery-weak indicator will be

displayed until a battery is inserted.

Bottom view

Nap

• You can set a short nap timer or countdown on your iPod

touch or iPhone.

Daylight saving time (DST)

• Activate or deactivate the daylight saving time function with

one simple step.

For more information, visit: www.memoryloader.com

1

Keep the AC adaptor connected to the household mains

socket when unscrewing the screw on the cover of the

battery holder using a screwdriver.

2

Open the cover of the battery holder.

3

Insert a new battery with the (+) side facing up.

4

Close the cover of the battery holder and secure it with

the screw.

Replacing the battery

The service life of this battery is approximately 1 month.

When the battery is weak, the battery-weak indicator will blink

constantly on the display.

Note:

• Do not heat or expose to ﬂ ame.

• Do not leave the battery(ies) in an automobile exposed

to direct sunlight for a long period of time with doors and

windows closed.

• Remove the battery if the clock radio is not going to be used

for a long period of time. Store in a cool, dark place.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

Warning

Keep the Button-Type battery out of the reach of children.

Never put Button-Type battery in mouth. If swallowed call

your doctor.

Warning

Risk of ﬁ re, explosion and burns. Do not recharge,

disassemble, heat above 60°C or incinerate.

RQTX1209-2E_1gb.indd 13RQTX1209-2E_1gb.indd 13 7/7/2010 10:41:38 AM7/7/2010 10:41:38 AM

RQTX1209

14

ENGLISH

14

NEDERLANDS

ENGLISH

■ Radio

A noise or sound distortion is heard.

• Distance the unit away from any television, personal computer

or device easily inﬂ uenced by magnetism.

Reset

This function enables you to restore the main unit to the original

factory settings or when it is behaving abnormally.

Rear view

Press [RESET] with a paper clip or a pointed object.

Troubleshooting guide

Before requesting service, make the following checks. If you

are in doubt about some of the check points, or if the solutions

indicated do not solve the problem, consult your dealer for

instructions.

■ Clock

Clock cannot be synchronised to iPod or iPhone’s time.

• Make sure the iPod or iPhone is securely connected and

turned on (Z page 9).

• Update your iPod or iPhone with the latest software.

Daylight saving time does not work.

• Make sure the clock has been set correctly.

• Press and hold [SLEEP] in clock mode to activate daylight

saving time (Z page 9).

■ Alarm

The iPod, radio or buzzer alarm does not sound at the

preset time.

• Check that “ALARM 1” or “ALARM 2” has been correctly

activated (Z page 11).

The iPod or radio alarm is activated but there is no sound at

the preset time.

• Check the alarm’s volume setting (Z page 11, 12).

■ iPod or iPhone

The iPod or iPhone cannot be operated with this unit.

• Make sure the iPod or iPhone has been securely connected

and turned on (Z page 10).

• Update your iPod or iPhone with the latest software.

There is no sound from the iPod or iPhone.

• Make sure the iPod or iPhone has been securely connected

(Z page 10).

• Adjust the volume.

The iPod or iPhone does not charge.

• Check the connections. Turn off and remove the iPod or

iPhone from the dock connector. Reinsert and turn it on again

(Z page 10).

RQTX1209-2E_1gb.indd 14RQTX1209-2E_1gb.indd 14 7/7/2010 10:41:39 AM7/7/2010 10:41:39 AM

ENGLISH

RQTX1209

15

Speciﬁ cations

AMPLIFIER SECTION

RMS Output Power (Mono)

Front channel 2.6 W per channel (8

), 1 kHz, 10% THD

TUNER SECTION

Preset memory FM 5 stations

Frequency modulation (FM)

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 (unbalanced)

SPEAKER SECTION

Type 1 way, 1 speaker system (Bass reﬂ ex)

Speaker unit(s) Impedance 8

Full range 2.5 cm cone type

GENERAL

Power supply (AC adaptor) AC 100 to 240 V, 50/60 Hz

DC Output 7.5 V

Power consumption (with iPod or iPhone charging)

Main unit 7 W

Dimensions (W x H x D) 112 mm x 80 mm x 150 mm

Mass

Main unit 0.37 kg

AC adaptor 0.14 kg

Operating temperature range 0°C to +35°C

Operating humidity range

20% to 80% RH (no condensation)

Maintenance

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions

that came with the cloth carefully.

Power consumption in standby mode:

Main unit 0.3 W (approximate)

AC adaptor 0.3 W (approximate)

Note:

1) Speciﬁ cations are subject to change without notice.

Mass and dimensions are approximate.

2) Total harmonic distortion is measured by the digital spectrum

analyser.

RQTX1209-2E_1gb.indd 15RQTX1209-2E_1gb.indd 15 7/7/2010 10:41:39 AM7/7/2010 10:41:39 AM

RQTX1209

ENGLISH

2

ESPAÑOL

ENGLISH

16

Estimado Cliente

Muchísimas gracias por haber adquirido este aparato.

Para un funcionamiento y seguridad óptimos, lea con

atención estas instrucciones antes de conectar, utilizar

o conﬁ gurar este producto.

Guarde este manual para su consulta en el futuro.

¡ADVERTENCIA!

• PARA MANTENER BIEN VENTILADA ESTA

UNIDAD, NO LA INSTALE NI PONGA EN UN

ESTANTE DE LIBROS, MUEBLE EMPOTRADO

U OTRO ESPACIO DE DIMENSIONES

REDUCIDAS. ASEGÚRESE QUE CORTINAS

Y OTROS MATERIALES NO OBSTRUYAN

LAS CONDICIONES DE VENTILACIÓN PARA

PREVENIR EL RIESGO DE SACUDIDAS

ELÉCTRICAS O INCENDIOS DEBIDOS AL

RECALENTAMIENTO.

• NO OBSTRUYA LAS ABERTURAS DE

VENTILACIÓN DE LA UNIDAD CON

PERIÓDICOS, MANTELES, CORTINAS U

OBJETOS SIMILARES.

• NO COLOQUE OBJETOS CON LLAMA

DESCUBIERTA, UNA VELA POR EJEMPLO,

ENCIMA DE LA UNIDAD.

• TIRE LAS PILAS DE FORMA QUE NO

CONTAMINE EL MEDIO AMBIENTE.

ESTA UNIDAD HA SIDO DISEÑADA PARA SER

UTILIZADA EN CLIMAS MODERADOS.

ADVERTENCIA:

PARA REDUCIR EL RIESGO DE INCENDIOS,

DESCARGAS ELÉCTRICAS O DAÑOS EN EL

PRODUCTO,

• NO EXPONGA ESTE APARATO A LA LLUVIA,

HUMEDAD, GOTEO O SALPICADURAS, Y NO

COLOQUE ENCIMA DEL MISMO OBJETOS

CON LÍQUIDOS COMO, POR EJEMPLO,

FLOREROS.

• UTILICE SOLAMENTE LOS ACCESORIOS

RECOMENDADOS.

• NO QUITE LA CUBIERTA (O EL PANEL

TRASERO); EN EL INTERIOR NO HAY

PIEZAS QUE PUEDA REPARAR EL USUARIO.

SOLICITE LAS REPARACIONES AL

PERSONAL DE SERVICIO CUALIFICADO.

Este producto puede tener interferencias causadas

por teléfonos móviles durante su utilización. Si

tales interferencias resultan evidentes, aumente la

separación entre el producto y el teléfono móvil.

La toma de corriente deberá estar instalada

cerca del equipo y donde se pueda acceder a ella

fácilmente.

El enchufe del cable de la alimentación deberá estar

siempre listo para ser utilizado.

Para desconectar completamente este aparato de

la red de CA, desconecte el enchufe del cable de

alimentación del receptáculo de CA.

Símbolos de identiﬁ cación del producto

Producto Ubicación

Unidad principal Parte inferior

Adaptador de CA Parte inferior

RQTX1209-2E_2es.indd 2RQTX1209-2E_2es.indd 2 7/7/2010 10:44:15 AM7/7/2010 10:44:15 AM

ENGLISHESPAÑOL

ESPAÑOL

ENGLISH

RQTX1209

3

17

Objetos extraños

No permita que objetos de metal caigan dentro de la

unidad. Esto puede causar una descarga eléctrica o un

fallo en el funcionamiento.

No permita que entren líquidos en la unidad. Esto

puede causar una descarga eléctrica o un fallo

en el funcionamiento. Si ocurre esto, desconecte

inmediatamente la unidad de la fuente de alimentación

y póngase en contacto con su distribuidor.

No rocíe insecticidas sobre o dentro de la unidad.

Contienen gases inﬂ amables que pueden encenderse

si son rociados dentro de la unidad.

Servicio

No intente reparar esta unidad usted mismo. Si el

sonido se interrumpe, los indicadores no se iluminan,

aparece humo o se produce cualquier otro problema

que no esté tratado en estas instrucciones, desconecte

el adaptador de CA y póngase en contacto con su

distribuidor o con un centro de servicio autorizado. Si

la unidad es reparada, desarmada o reconstruida por

personas que no estén cualiﬁ cadas para ello pueden

producirse descargas eléctricas o daños en la misma.

Aumente la vida útil de la unidad desconectándola de

la fuente de alimentación si no la va a utilizar durante

mucho tiempo.

Precauciones de seguridad

Ubicación

Coloque el unidad en una superﬁ cie plana lejos de la

luz la del sol, temperatura y humedad altas, y vibración

excesiva. Estas condiciones pueden dañar la caja y

otros componentes, reduciendo por lo tanto la vida útil

de la unidad.

Colóquela por lo menos a 15 cm de superﬁ cies de

paredes para evitar distorsión y efectos acústicos

indeseados.

No ponga objetos pesados sobre la unidad.

Voltaje

No utilice fuentes de alimentación de alta tensión. Esto

puede sobrecargar la unidad y causar un incendio.

No use una fuente de alimentación de CC. Compruebe

cuidadosamente la fuente cuando instale la unidad en

una embarcación o en otro lugar donde se utilice CC.

Protección del adaptador de CA

Asegúrese de que el adaptador de CA esté conectado

correctamente y no esté dañado. Una mala conexión

y daños en el cable pueden causar un incendio o una

descarga eléctrica. No tire del cable ni lo doble, y no

ponga objetos pesados encima de él.

Sujete ﬁ rmemente el enchufe cuando desconecte el

adaptador. Tirar del adaptador de CA puede causar

una descarga eléctrica.

No maneje el enchufe con las manos mojadas. Esto

puede causar una descarga eléctrica.

RQTX1209-2E_2es.indd 3RQTX1209-2E_2es.indd 3 7/7/2010 10:44:15 AM7/7/2010 10:44:15 AM

RQTX1209

ENGLISH

4

ESPAÑOL

ENGLISH

18

Información para Usuarios sobre la

Recolección y Eliminación de aparatos

viejos y baterías usadas

Estos símbolos en los productos,

embalajes y/o documentos adjuntos,

signiﬁ can que los aparatos eléctricos y

electrónicos y las baterías no deberían

ser mezclados con los desechos

domésticos.

Para el tratamiento apropiado, la

recuperación y el reciclado de aparatos

viejos y baterías usadas, por favor,

observe las normas de recolección

aplicables, de acuerdo a su legislación

nacional y a las Directivas 2002/96/CE y

2006/66/CE.

Al desechar estos aparatos y baterías

correctamente, Usted estará ayudando a

preservar recursos valiosos y a prevenir

cualquier potencial efecto negativo sobre

la salud de la humanidad y el medio

ambiente que, de lo contrario, podría

surgir de un manejo inapropiado de los

residuos.

Para mayor información sobre la

recolección y el reciclado de aparatos

y baterías viejos, por favor, contacte

a su comunidad local, su servicio de

eliminación de residuos o al comercio

donde adquirió estos aparatos.

Podrán aplicarse penas por la eliminación

incorrecta de estos residuos, de acuerdo

a la legislación nacional.

Para usuarios empresariales en la

Unión Europea

Si usted desea descartar aparatos

eléctricos y electrónicos, por favor

contacte a su distribuidor o proveedor a

ﬁ n de obtener mayor información.

[Informacion sobre la Eliminación

en otros Países fuera de la Unión

Europea]

Estos símbolos sólo son válidos dentro

de la Unión Europea. Si desea desechar

estos objetos, por favor contacte con

sus autoridades locales o distribuidor

y consulte por el método correcto de

eliminación.

Nota sobre el símbolo de la bateria

(abajo, dos ejemplos de símbolos):

Este símbolo puede ser usado en

combinación con un símbolo químico.

En este caso, el mismo cumple con

los requerimientos establecidos por la

Directiva para los químicos involucrados.

RQTX1209-2E_2es.indd 4RQTX1209-2E_2es.indd 4 7/7/2010 10:44:15 AM7/7/2010 10:44:15 AM

ENGLISHESPAÑOL

ESPAÑOL

ENGLISH

RQTX1209

5

19

Accesorios suministrados

Por favor, compruebe e identiﬁ que los accesorios

suministrados.

1 Adaptador de CA

iPod e iPhone compatibles

• iPod nano 5a generación (video cámara) (8GB, 16GB)

• iPod touch 2a generación (8GB, 16GB, 32GB, 64GB)

• iPod classic [120GB, 160GB (2009)]

• iPod nano 4a generación (video) (8GB, 16GB)

• iPod classic (160GB) (2007)

• iPod touch 1a generación (8GB, 16GB, 32GB)

• iPod nano 3a generación (video) (4GB, 8GB)

• iPod classic (80GB)

• iPod nano 2a generación (aluminio) (2GB, 4GB, 8GB)

• iPod 5a generación (video) (60GB, 80GB)

• iPod 5a generación (video) (30GB)

• iPod nano 1a generación (1GB, 2GB, 4GB)

• iPod 4a generación (pantalla de color) (40GB, 60GB)

• iPod 4a generación (pantalla de color) (20GB, 30GB)

• iPod 4a generación (40GB)

• iPod 4a generación (20GB)

• iPod mini (4GB, 6GB)

• iPhone 3GS (16GB, 32GB)

• iPhone 3G (8GB, 16GB)

• iPhone (4GB, 8GB, 16GB)

La compatibilidad depende de la versión del software de su

iPod o iPhone.

Índice

Precauciones de seguridad .........................................3

Accesorios suministrados ...........................................5

iPod e iPhone compatibles ..........................................5

Controles ....................................................................... 6

Conexiones ...................................................................7

Puesta en hora ..............................................................7

Utilización un iPod o iPhone .......................................8

Utilización la radio ........................................................8

Utilización del temporizador para dormir ...................9

Utilización la alarma .....................................................9

Utilización la aplicación Memory Loader .................10

Pila de repuesto de la memoria .................................11

Guía para la solución de problemas .........................12

Especiﬁ caciones ........................................................13

Mantenimiento ............................................................13

“Made for iPod” y “Made for iPhone” signiﬁ ca que un

accesorio electrónico ha sido diseñado para conectarse

especíﬁ camente a iPod, o iPhone, respectivamente, y su

fabricante ha certiﬁ cado que cumple con los estándares de

rendimiento de Apple.

Apple no se responsabiliza del funcionamiento de este

dispositivo o su cumplimiento de las normas de regulación

y seguridad.

iPhone, iPod, iPod classic, iPod nano e iPod touch son

marcas comerciales de Apple Inc., registradas en EUA y

otros países.

RQTX1209-2E_2es.indd 5RQTX1209-2E_2es.indd 5 7/7/2010 10:44:16 AM7/7/2010 10:44:16 AM

RQTX1209

ENGLISH

6

ESPAÑOL

ENGLISH

20

Controles

A [SNOOZE/DIMMER]

Función de repetición de alarma: Para detener la alarma

durante 9 minutos.

Atenuador: Para ajustar el brillo del panel del visor

(Alto (predeterminado), Medio o Bajo).

B [ALARM OFF]

Para apagar la alarma.

C [ALARM 1], [ALARM 2]

Para activar la función alarma 1 o alarma 2.

Para mostrar la conﬁ guración de alarma 1 o alarma 2.

D [SLEEP]

Para activar la función dormir.

Para activar el horario de ahorro de energía (en verano) en

el modo reloj.

E [2 /–, ADJ], [+/6, ADJ]

Para ajustar las conﬁ guraciones del reloj, la radio y la

alarma.

Para saltar a la pista anterior o siguiente.

Para adelantar o retroceder la búsqueda dentro de una

pista.

F [SET/PRESET]

Para conﬁ gurar el reloj.

Para realizar una conﬁ guración previa automática o para

visualizar los canales preconﬁ gurados en el modo radio.

G [TIME SYNC]

Para sincronizar la unidad principal con la hora de un iPod

o iPhone.

H [+, VOL], [–, VOL]

Para ajustar el volumen.

Para seleccionar la visualización de un reloj de 12 o

24 horas.

I [

4/9

]

Para iniciar la reproducción de música desde un iPod o

iPhone y para pausar la reproducción.

J [SOURCE]

Para seleccionar el modo reloj, “IPOD” o “RADIO FM”.

A

B

C

D

E

F

G

HIJ

RQTX1209-2E_2es.indd 6RQTX1209-2E_2es.indd 6 7/7/2010 10:44:16 AM7/7/2010 10:44:16 AM

Strona się ładuje...

Panasonic RCDC1EG Instrukcja obsługi

Panasonic RCDC1EG Instrukcja obsługi

Powiązane artykuły

Inne dokumenty