EN
Owner’s manual18
sunlight and do not expose to high temperatures.
The appliance cannot operate at a pressure other than the one specied on the identication
label at the back. It is recommended to use an appropriate pressure regulator.
During connection of the mobile fridge to the gas cylinder, always stay clear of any sort of
ignition and do not smoke. Connect in the order gas cylinder – pressure regulator – appliance.
Excessive twisting and bending of the exible hose must be avoided. Check for leaks only by
means of soapy water. Never check for leaks using a ame.
When changing the gas cylinder or disconnecting the hose, it is necessary to close the valve
of the gas cylinder. Always replace a damaged or porous hose.
The gas valve knob (right) is a combination of temperature control and ignition. Furthermore
the gas valve assembly consists of an incorporated safety pilot, a burner with an ignition plug
and a piezo-electric igniter. The safety pilot automatically maintains the gas supply as long as
it remains lit. It automatically shuts o the supply of gas if the ame goes out.
Open the gas valve of the gas cylinder, press the gas valve knob in the panel, wait approx. 15
seconds, turn the pressed knob to the right, a click of the igniter can be heard and the gas
ame is ignited. Hold the knob pressed in this position so that the ame remains burning. It
might be possible that this operation has to be repeated a couple of times, especially if the
appliance has not been used for a long time or if the gas cylinder has been changed. There
can be air in the system, which has to be forced out. It is necessary to check that the pilot is lit
by looking through the orice at the top of the unit or through the hole at the back near the
burner. If the ame fails to light, wait at least a minute before trying again.
Leave the knob for some time in max. position, after a suciently long cool down period, a
lower position can be selected.
To disconnect the mobile fridge running on gas: close the valve of the gas cylinder and then
turn the gas valve knob in the panel to position ‘press’.
CLEANING AND MAINTENANCE
• Clean the appliance inside and outside with a soft, damp cloth regularly. In case of
stubborn stains, use sodium bicarbonate dissolved in lukewarm water to clean the unit.
• Never use abrasive products, detergents or soap. Do not use abrasive cleaning agents or
hard objects during cleaning as these can damage the refrigerator.
• After washing, rinse with clean water and dry carefully. Do not leave the refrigerator o
with food inside or lid closed.
• Never clean the appliance under running water.