Cameo DURA® SPOT 60 Instrukcja obsługi

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

DURA® SPOT

OUTDOOR LED SPOT IP67

CLDS60 / CLDS100 / CLDS200 / CLDS400

RGBW

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

INSTRUCTIONS FOR OUTDOOR INSTALLATION EQUIPMENT 9

DELIVERY INCLUDED 10

INTRODUCTION 11

CONNECTIONS 11

OPERATION PER REMOTE UNIT CL UNICON 14

INSTALLATION 22

GLARE PROTECTION 23

CARE, MAINTENANCE AND REPAIR 23

OPTIONAL ACCESSORIES 25

DIMENSIONS 25

TECHNICAL DATA 27

EXPLANATION OF IP PROTECTION CLASS 28

EXPLANATIONS ON THE IK SHOCK RESISTANCE LEVEL 29

MINIMUM DISTANCE TO ILLUMINATED SURFACE 29

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 29

DISPOSAL 29

MANUFACTURER’S DECLARATIONS 30

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 31

BESTIMMUNGSGEMÄSSER GEBRAUCH 31

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 31

SICHERHEITSHINWEISE 32

HINWEISE FÜR OUTDOOR-INSTALLATIONSGERÄTE 35

LIEFERUMFANG 36

EINFÜHRUNG 37

ANSCHLÜSSE 37

BEDIENUNG PER REMOTE-EINHEIT CL UNICON 40

MONTAGE 48

BLENDSCHUTZ 49

PFLEGE, WARTUNG UND REPARATUR 49

OPTIONALES ZUBEHÖR 51

ABMESSUNGEN 51

TECHNISCHE DATEN 53

ERLÄUTERUNGEN ZUR IP-SCHUTZART 54

ERLÄUTERUNGEN ZUM IK STOSSFESTIGKEITSGRAD 55

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 55

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 55

ENTSORGUNG 55

HERSTELLERERKLÄRUNGEN 56

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 57

UTILISATION PRÉVUE 57

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 57

CONSIGNES DE SÉCURITÉ 58

INSTRUCTIONS POUR L'INSTALLATION DE L'EQUIPEMENT A L'EXTERIEUR 61

LIVRAISON INCLUSE 61

INTRODUCTION 62

CONNEXIONS 63

OPÉRATION PAR UNITÉ TÉLÉCOMMANDE CL UNICON 65

INSTALLATION 74

PROTECTION CONTRE L'ÉBLOUISSEMENT 75

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 75

ACCESSOIRES EN OPTION 77

DIMENSIONS 77

CARACTÉRISTIQUES TECHNIQUES 79

EXPLICATION DE LA CLASSE DE PROTECTION IP 80

EXPLICATIONS SUR LE NIVEAU DE RÉSISTANCE DU CHOC IK 81

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 82

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 82

MISE AU REBUT 82

DÉCLARATIONS DU FABRICANT 83

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DEL USUARIO 84

USO PREVISTO 84

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 84

INSTRUCCIONES DE SEGURIDAD 85

INSTRUCCIONES PARA EL EQUIPO DE INSTALACIÓN EXTERIOR 87

ENTREGA INCLUIDA 88

INTRODUCCIÓN 89

CONEXIONES 90

FUNCIONAMIENTO POR UNIDAD REMOTA CL UNICON 92

INSTALACIÓN 100

PROTECCIÓN ANTIDESLUMBRANTE 101

CUIDADO, MANTENIMIENTO Y REPARACIÓN 101

ACCESORIOS OPCIONALES 102

DIMENSIONES 103

DATOS TÉCNICOS 104

EXPLICACIÓN DE LA CLASE DE PROTECCIÓN IP 106

EXPLICACIONES SOBRE EL NIVEL DE RESISTENCIA AL CHOQUE IK 107

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 107

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 107

RECICLAJE 107

DECLARACIÓN DEL FABRICANTE 108

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 109

ZAMIERZONE ZASTOSOWANIE 109

DEFINICJE I OBJAŚNIENIA SYMBOLI 109

INSTRUKCJE BEZPIECZEŃSTWA 110

INSTRUKCJE DOTYCZĄCE SPRZĘTU DO INSTALACJI NA ZEWNĄTRZ 113

ZAKRES DOSTAWY 113

WPROWADZENIE 114

POŁĄCZENIA 115

OBSŁUGA ZA POMOCĄ JEDNOSTKI ZDALNEJ CL UNICON 117

INSTALACJA 125

OCHRONA PRZED ODBLASKAMI 126

PIELĘGNACJA, KONSERWACJA I NAPRAWA 126

AKCESORIA OPCJONALNE 128

WYMIARY 128

DANE TECHNICZNE 130

WYJAŚNIENIE KLASY OCHRONY IP 131

WYJAŚNIENIA DOTYCZĄCE POZIOMU ODPORNOŚCI NA WSTRZĄSY IK 132

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI 132

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 133

UTYLIZACJA 133

DEKLARACJE PRODUCENTA 133

ITALIANO

INFORMAZIONI SU QUESTO MANUALE DI ISTRUZIONI 135

USO PREVISTO 135

DEFINIZIONI E SPIEGAZIONI DEI SIMBOLI 135

ISTRUZIONI DI SICUREZZA 136

ISTRUZIONI PER LE APPARECCHIATURE DI INSTALLAZIONE ALL'APERTO 138

CONSEGNA INCLUSA 139

INTRODUZIONE 140

COLLEGAMENTI 141

FUNZIONAMENTO PER UNITÀ REMOTA CL UNICON 143

INSTALLAZIONE 151

PROTEZIONE ANTIABBAGLIAMENTO 152

CURA, MANUTENZIONE E RIPARAZIONE 152

ACCESSORI OPZIONALI 154

DIMENSIONI 154

DATI TECNICI 156

SPIEGAZIONE DELLA CLASSE DI PROTEZIONE IP 157

SPIEGAZIONI SUL LIVELLO DI RESISTENZA ALLO SHOCK DI IK 158

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 158

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFLAMMABILI 159

SMALTIMENTO 159

DICHIARAZIONI DEL PRODUTTORE 159

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX /

CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 161

6

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is availab-

le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

This product is an outdoor spotlight for permanent installation!

This spotlight is intended exclusively for professional users and is not suitable for private house-

holds or third parties!

Use of the product outside the specified technical data and operating conditions, as well as incor-

rect installation, is considered inappropriate!

This product is not suitable for intended operation under water, regardless of the IP classification!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded! The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or states that can lead to damage to property and/or the environment.

7

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device that does not contain any user-replaceable parts

parts are located.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open or modify the unit.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the appliance fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the mains cable of the device is damaged, do not operate the device.

4. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not operate the unit if it has been exposed to large temperature fluctuations

(for example, after transport). Moisture and condensation can damage the device.

Switch on the device only when it has reached room temperature.

8

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the unit. If the device has a voltage selector switch, do not

connect the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the unit from the mains at all poles, it is not sufficient to press the

on/off switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the unit.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the specified maximum output current on units with Power Out connec-

tion. Ensure that the total current consumption of all connected devices does not

exceed the specified value.

7. Replace pluggable mains cables only with original cables.

HAZARD:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of

persons (including children) with reduced physical, sensory or mental capabilities.

2. Danger from falling down! Make sure that the device is securely installed and will

not fall down. Only use suitable stands or mounts (particularly for fixed installa-

tions). Ensure that accessories are properly installed and secured. Ensure that

applicable safety regulations are observed.

WARNING:

1. Use the device only in the manner intended.

2. Operate the device only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g.

due to tripping hazards.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

6. Always observe the minimum distance to the illuminated surface that can be read

on the device!

CAUTION:

1. In the case of moving components such as mounting brackets or other moving

components, there is a possibility of jamming.

2. In the case of units with motor-driven components, there is a risk of injury from the

movement of the unit. Sudden movement of the device can cause shock reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

lamp to cool sufficiently before removal, maintenance work and charging etc.

9

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ATTENTION:

1. Do not install or operate the device near any radiators, heat registers, stoves or

other heat sources. Ensure that the device is always installed in such a way that it

is sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for trans-

port.

5. Avoid shock or impact to the unit.

6. Observe the IP protection class as well as the ambient conditions such as tempera-

ture and humidity according to the specification.

7. Devices can be constantly further developed. In the event of deviating informati-

on on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always takes

priority.

8. The unit is not suitable for tropical climates and for operation above 2000 m above

sea level.

9. Unless explicitly stated, the unit is not suitable for operation in marine conditions .

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not be

replaced by the user. In the event of a fault, please contact your sales partner.

INSTRUCTIONS FOR OUTDOOR INSTALLATION EQUIPMENT

1. Units for installation applications are designed for continuous operation.

2. Equipment for outdoor installation is largely weather-resistant. Depending on the

design, however, installed seals may be made of materials that deteriorate over

time. These must be checked regularly and replaced if necessary.

3. The correct condition of the housing parts and connections must be checked

regularly.

4. Surfaces and plastic parts can also weather in installation equipment, e.g. due to

UV irradiation. This generally does not impair functionality.

5. Damage to the surface coating can impair the device's corrosion protection.

Damaged surface coating (e.g. scratches) must be promptly repaired by suitable

measures.

6. Screw connections can be impaired in their freedom of movement (e.g. due to

oxidation or impurities). Here, appropriate measures for loosening are to be imple-

mented.

7. Unless explicitly stated otherwise on the device or in the technical data, the devices

are intended for installation heights of less than 5 m.

10

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

DELIVERY INCLUDED

Remove the product from the packaging and remove all packaging material. Please check the

completeness and integrity of the delivery and notify your distribution partner immediately after

purchase if the delivery is not complete or if it is damaged.

Included in the scope of delivery of the product CLDS60 are:

X1 x DS 60 spotlight

X1 x mounting ring for optional interchangeable lenses (pre-mounted)

X1 x Half Anti Glare Shield (pre-mounted)

X1 x mounting bracket (pre-assembled)

XUser manual

Included in the scope of delivery of the product CLDS100 are:

X1 x DS 100 spotlight

X1 x mounting ring for optional interchangeable lenses (pre-mounted)

X1 x Half Anti Glare Shield (pre-mounted)

X1 x mounting bracket (pre-assembled)

XUser manual

Included in the scope of delivery of the product CLDS200:

X1 x DS 200 spotlight

X1 x mounting ring for optional interchangeable lenses (pre-mounted)

X1 x Half Anti Glare Shield (pre-mounted)

X1 x mounting bracket (pre-assembled)

XUser manual

Included in the scope of delivery of the product CLDS400:

X1 x DS 400 spotlight

X1 x mounting ring for optional interchangeable lenses (pre-mounted)

X1 x Half Anti Glare Shield (pre-mounted)

X1 x mounting bracket (pre-assembled)

XUser manual

11

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

INTRODUCTION

DURA SPOT OUTDOOR INSTALLATION SPOTLIGHT IP67

CLDS60 with 3 x 20 W 4in1 RGBW LEDs

CLDS100 with 6 x 20 W 4in1 RGBW LEDs

CLDS200 with 12 x 20 W 4in1 RGBW LEDs

CLDS400 with 20 x 20 W 4in1 RGBW LEDs

CONTROL FUNCTIONS

• 1-channel, 2-channel Preset, 2-channel CCT, 3-channel RGB, 4-channel RGBW, 6-channel

Direct and 10-channel full access DMX control

• RDM

• Control via remote unit CL UNICON (optionally available)

• Master/slave modes

• Standalone functions

FEATURES

• Protection class IP67

• Impact resistance rating IK08.

• Convection cooling

• Operating voltage 100 - 277 V AC

The spotlights feature the RDM standard (remote device management). This remote device ma-

nagement enables the status query and configuration of RDM end devices via an RDM-capable

controller, such as the optionally available Cameo UNICON (item number CLIREMOTE). The Cameo

UNICON also allows access to the entire fixture menu.

CONNECTIONS

HAZARD!

Connecting cables to the headlamp requires detailed expertise and may only be car-

ried out by specially trained persons! If you do not have this qualification, do not try

to connect cables yourself, but use the help of professional companies! Before wiring

the headlamp, make sure that the power supply intended for connection is not live!

The connections must comply with a water tightness of at least protection class IP67!

The manufacturer shall not be liable for any damage to property or personal injury

caused by improper handling.

12

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

2 1(*)

3

- The connection cables of the models DS 60, DS 100, DS 200 and DS 400 are identical -

1 POWER IN

Permanently mounted cable for the power supply of the headlamp. The spotlight is delivered

without a mains plug. Occupancy:

Power In

Brown Phase (L)

Green-

yellow

Grounding

conductor

Blue Neutral

conductor (N)

13

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

1(*) POWER IN - US & CANADA

Permanently mounted cable for the power supply of the headlamp. The spotlight is delivered

without a mains plug. Occupancy:

Power In - US & Canada

Black Phase (L)

Green Grounding

conductor

White Neutral

conductor (N)

2 DMX IN / OUT

Cable for controlling the headlamp and for forwarding the control signal. The headlamp is deliver-

ed without plug. DMX IN and DMX OUT are identified by means of labels. Occupancy:

DMX In

Red DMX +

Shielding (shrink tubing

insulation) Shield / GND

White DMX -

DMX Out

Red DMX +

Shielding (shrink tubing

insulation) Shield / GND

White DMX -

DMX IN / OUT: The shield can be recognised by the fact that the wire braid has been

insulated with the help of a heat-shrinkable sleeve.

3 SAFETY

Safety eyelet for securing the headlamp when mounted overhead.

PRESSURE EQUALISATION ELEMENT

The pressure equalisation element to prevent condensation inside the housing is located in the

rear part of the unit. In order to ensure its proper function, the element must be protected from

contamination.

14

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

OPERATION PER REMOTE UNIT CL UNICON (optionally available)

Functions of the operating elements

Display Encoder + BACK

Value up ↻

Value down ↺

Back BACK

✔Conﬁrm

After you have switched on the remote unit CL UNICON (press BACK brieﬂy to switch on), the dis-

play shows "Update, Please Wait" for a short time (for service purposes only) and then the main

menu. Connect the remote unit to one or more RDM devices using DMX or network cables.

Select the menu item RDM/Fixture using the rotary-push encoder or by pressing the arrow

symbols  or  in the display and conﬁrm the selection by pressing the encoder or the check

symbol ✔ in the display. A list of all connected RDM units is then displayed (in the example

DURA SPOT 60/DURA SPOT 60, DURA SPOT 100/DURA SPOT 100, DURA SPOT 200/DURA SPOT

200, DURA SPOT 400/DURA SPOT 400; the ﬁrst part of the displayed RDM unit shows the unit

model, the second part after "/" is the label and can be individually adjusted in the menu item

Label for easier identiﬁcation). Select the desired model and conﬁrm the selection (in example

DURA SPOT 60/DURA SPOT 60).

All information and conﬁguration options for the spotlight that can be called up and edited via

RDM are now displayed.

List of information and configuration options with explanations:

15

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

UID: Individual and unchangeable identiﬁcation number of the selected RDM device

(Unique Identiﬁer)

Label: Individually adjustable marking of the RDM unit

Model: Device model

Manufacturer: Device manufacturer

Firmware: Device ﬁrmware

Identify: ON Selected spotlight ﬂashes with approx. 1 Hz

OFF Flashing disabled

DMX address: Current DMX start address (can be edited in the menu option)

DMX

Personality: Current DMX mode (can be edited in the menu option)

DMX slots: Number of channels in current DMX mode

Sensor: LED temperature (press ✔ to display)

Fixture Menu: Individual Cameo unit menu for editing the settings

(see Fixture Menu)

Label

In the RDM/Fixture menu, select Label and confirm the selection to individually name the RDM

device.

Select character:  or  or turn the encoder

Delete all characters: Reset

Set space: Space

Reset position: Clean

Secure labelling: Save

Conﬁrm command or

character and select

the next digit:

Press ✔ or encoder

DEVICE MENU (Fixture Menu):

To enter the ﬁxture menu, select Fixture Menu and conﬁrm the selection.

Navigate in the unit menu:

Select the desired menu item with  or , or by turning the encoder, conﬁrm with ✔ or by

pressing the encoder. Back with  or BACK.

16

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Set the value or status with  or , or by turning the encoder, conﬁrm with ✔ or by pressing

the encoder. Back with  or BACK.

CONFIGURE DMX START ADDRESS

Select DMX Address, confirm the selection, set the desired DMX address and confirm the input.

SELECT DMX MODE

Select DMX Mode, confirm the selection, then select the desired DMX mode and confirm the

selection.

STAND-ALONE DIRECT LED MODE

The stand-alone Direct LED mode allows dimmer and RGBW to be set directly on the unit with

values from 0 to 255, similar to a DMX controller. In this way, an individual scene can be created

without an additional DMX controller.

Select Stand Alone, confirm the selection, then select Direct LED and confirm again. Now select

the menu item you wish to edit and confirm the selection. Set the desired value in the selected

menu item and confirm the entry.

17

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

COLOUR PRESET STANDALONE MODE

15 preset colours plus 4 individual colours (User Colour 1 - 4) are available as presets.

Select Stand Alone, confirm the selection, then select Colour Preset, confirm, select Preset or

User Color and confirm again. Now select the desired colour and confirm the selection. Set the

brightness for all presets in the Dimmer menu item.

The individual colours User Color 1-4 are created in menu item Edit User Color in the Stand

Alone menu.

CCT STANDALONE MODE (Correlated Colour Temperature)

In the stand-alone CCT mode, the colour temperature can be adjusted in 100K steps from 1800K

to 10000K and additionally the brightness (dimmer).

Select Stand Alone, confirm the selection, then select CCT and confirm again. Now select the

menu item you wish to edit and confirm the selection. Set the desired value and confirm the entry.

STAND ALONE OPERATING MODE AUTO PROGRAMME

The 6 available auto programmes each consist of permanently programmed colour change

sequences, brightness (dimmer) and running speed (speed) can be adjusted superordinately for

all programmes.

Select Stand Alone, confirm the selection, then select Auto and confirm again. Now select Auto

Program, Dimmer or Speed in the submenu, confirm, select the desired programme and set the

brightness and running speed as desired. Confirm all entries.

18

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

EDIT USER COLOR IN THE STAND ALONE MENU (Edit User Color)

In the menu item Edit User Color, you can save the brightness and a colour mixture of R, G, B and

W directly in the unit in four individual colour presets.

Select Stand Alone, confirm the selection, then select Edit User Color and confirm again. Select

the desired preset (Color 1- Color 4) and confirm the selection. Now select the menu item you

wish to edit and confirm. Set the desired value from 000 to 255 and confirm again.

TIMER FUNCTION

The timer function enables time-controlled control of the stand-alone Direct LED, Colour Preset

and CCT modes in such a way that the fade-in time (Fade In) can be set from 0 to 60 minutes, the

dwell time (Dwell Time) from 0 to 24 hours and the fade-out time (Fade Out) from 0 to 60 minutes.

After activation of the timer function, the timer control will be implemented upon the next system

start.

Select Stand Alone, confirm the selection, then select Timer and confirm again. Select the set-

ting On under Timer and confirm. For the individual timer control settings, select Fade In, Dwell

Time or Fade Out and confirm. You can now set the respective value as desired. Confirm all

entries. To deactivate the timer function, select the setting Off under Timer and confirm the entry.

Note: The timer function is suitable for use in master/slave operation via cable.

19

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

SLAVE MODE

For the slave unit, select Slave in the main menu, confirm the selection, then select SLAVE and

confirm again. Connect the slave and master units (same model, same software version) via DMX,

configure the master unit as MASTER and activate one of the stand-alone operating modes in the

master unit. The slave unit will now follow the master unit.

SYSTEM SETTINGS (Settings)

Select Settings and confirm.

This will take you to the submenu for configuring the submenu items (see table):

Settings

Dimmer Curve = Dimmer Curve

Linear Light intensity increases linearly with

DMX value

Exponential

Light intensity can be ﬁnely adjusted at

lower DMX values and broadly adjusted

at higher DMX values

Logarithmic

Light intensity can be broadly adjusted

at lower DMX values and ﬁnely adjust-

ed at higher DMX values

20

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Dimmer Curve = Dimmer Curve S-curve

Light intensity can be ﬁnely adjusted

at lower and higher DMX values and

broadly adjusted at medium DMX

values

Dimmer

Response =Dimmer

Response

LED Light responds abruptly to changes in

DMX value

Halogen Light behaves like a halogen spotlight

with slight brightness changes

PWM

Frequency =Conﬁguration of

PWM frequency

650Hz /

1530Hz /

3600Hz /

12000Hz /

18900Hz /

25000Hz

Colour

Calibration =Colour

Calibration

RAW R, G, B and W with maximum value 255

Factory Factory calibration of R, G, B and W

(across all modes)

User Enable User Calibration

User Data

Set individual colour calibration. Cross-

mode brightness setting of R, G, B, A

and L with values from 000 - 255.

Signal Fail =

Operating status

when DMX signal

is interrupted

Hold Last command is retained

Last Stand

Alone

Activates the last selected Stand Alone

operating mode

Fade to Black

(10s) 10 seconds Fade Out

Blackout Activates blackout

Full All LEDs 100% output

Power Mode = Operating mode Constant Constant brightness over long periods

Maximum Maximum brightness

SYSTEM INFORMATION (System Info)

Select System Info and confirm the selection.

This will take you to the submenu for accessing the system information (see table):

Strona się ładuje...

Cameo DURA® SPOT 60 Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Cameo DURA® SPOT 60 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty