Cameo S2 IP Instrukcja obsługi

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

S2 IP

LED SOFTLIGHT PANEL - IP65

CLS2IP

RGBW

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

NOTES ON PORTABLE OUTDOOR DEVICES 10

INCLUDED 10

INTRODUCTION 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12

OPERATION 14

MOUNTING THE TV SPIGOT ON THE U-BRACKET 28

STATIV MOUNTING 28

USING TV SPIGOTS FOR TRUSS MOUNTING 29

OMEGA BRACKET 30

DIFFUSER PANEL 31

OPTIONAL ACCESSORIES 33

CARE, MAINTENANCE AND REPAIR 33

DIMENSIONS 35

TECHNICAL DATA 36

EXPLANATION OF IP PROTECTION CLASS 37

MINIMUM DISTANCE TO ILLUMINATED SURFACE 37

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 38

DISPOSAL 38

MANUFACTURER’S DECLARATIONS 38

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 41

BESTIMMUNGSGEMÄSSER GEBRAUCH 41

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 41

SICHERHEITSHINWEISE 42

HINWEISE FÜR ORTSVERÄNDERLICHE OUTDOOR-GERÄTE 45

LIEFERUMFANG 46

EINFÜHRUNG 46

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 47

BEDIENUNG 50

TV-ZAPFEN AM U-BÜGEL MONTIEREN 64

STATIVMONTAGE 64

TV-ZAPFEN FÜR TRAVERSENMONTAGE NUTZEN 65

OMEGA-BÜGEL 66

DIFFUSORSCHEIBE 67

OPTIONALES ZUBEHÖR 69

PFLEGE, WARTUNG UND REPARATUR 69

ABMESSUNGEN 71

TECHNISCHE DATEN 72

ERLÄUTERUNGEN ZUR IP-SCHUTZART 73

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 73

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 74

ENTSORGUNG 74

HERSTELLERERKLÄRUNGEN 74

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 76

UTILISATION PRÉVUE 76

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 76

CONSIGNES DE SÉCURITÉ 77

NOTES SUR LES APPAREILS PORTABLES POUR EXTÉRIEUR 81

CONTENU DU CARTON 81

INTRODUCTION 81

BRANCHEMENTS, UTILISATION ET INDICATEURS 82

OPERATION 85

MONTAGE DE L'EMBOUT TV SUR LE SUPPORT EN U 100

MONTAGE STATIF 100

L'UTILISATION D'EMBOUTS TV POUR LE MONTAGE D'UNE ARMATURE 101

SUPPORT OMEGA 102

PANNEAU DIFFUSEUR 103

ACCESSOIRES EN OPTION 105

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 105

DIMENSIONS 107

CARACÉRISTIQUES TECHNIQUES 108

EXPLICATION DE LA CLASSE DE PROTECTION IP 109

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 110

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 110

MISE AU REBUT 110

DÉCLARATIONS DU FABRICANT 111

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DEL USUARIO 112

USO PREVISTO 112

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 112

INSTRUCCIONES DE SEGURIDAD 113

NOTAS SOBRE LOS DISPOSITIVOS PORTÁTILES DE EXTERIOR 117

CONTENIDO DE LA ENTREGA 117

INTRODUCCIÓN 117

CONEXIONES, MANDOS E INDICADORES 118

OPERATION 121

MONTAJE DE LA ESPIGA DE TV EN EL SOPORTE EN U 136

MONTAJE ESTATIVO 136

USO DE ESPIGAS DE TV PARA MONTAJE EN TRUSS 137

SOPORTE OMEGA 138

PANEL DIFUSOR 139

ACCESORIOS OPCIONALES 141

CUIDADO, MANTENIMIENTO Y REPARACIÓN 141

DIMENSIONES 143

DATOS TÉCNICOS 144

EXPLICACIÓN DE LA CLASE DE PROTECCIÓN IP 145

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 146

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 146

RECICLAJE 146

DECLARACIÓN DEL FABRICANTE 146

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 148

ZAMIERZONE ZASTOSOWANIE 148

DEFINICJE I OBJAŚNIENIA SYMBOLI 148

INSTRUKCJE BEZPIECZEŃSTWA 149

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 155

OPERATION 158

MONTAŻ KRÓĆCA TV NA UCHWYCIE U-KSZTAŁTNYM 172

MONTAŻ STATYCZNY 172

WYKORZYSTANIE CZOPÓW TV DO MONTAŻU KRATOWNICY 173

UCHWYT OMEGA 174

PANEL DYFUZYJNY 175

AKCESORIA OPCJONALNE 177

PIELĘGNACJA, KONSERWACJA I NAPRAWA 177

WYMIARY 179

DANE TECHNICZNE 180

WYJAŚNIENIE KLASY OCHRONY IP 181

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI 182

MINIMALNA ODLEGŁOŚĆ OD MATERIAŁÓW NORMALNIE ŁATWOPALNYCH 182

UTYLIZACJA 182

DEKLARACJE PRODUCENTA 182

ITALIANO

INFORMAZIONI SU QUESTO MANUALE DI ISTRUZIONI 184

USO PREVISTO 184

DEFINIZIONI E SPIEGAZIONI DEI SIMBOLI 184

ISTRUZIONI DI SICUREZZA 185

NOTE SUI DISPOSITIVI PORTATILI PER ESTERNI 188

MATERIALE COMPRESO NELLA FORNITURA 189

INTRODUZIONE 189

CONNESSIONI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 190

OPERATION 193

MONTAGGIO DEL RACCORDO TV SULLA STAFFA A U 207

MONTAGGIO STATIVO 207

UTILIZZANDO I RACCORDI TV PER IL MONTAGGIO DELLA CAPRIATA 208

BRACCIALE OMEGA 209

PANNELLO DIFFUSORE 210

ACCESSORI OPZIONALI 212

CURA, MANUTENZIONE E RIPARAZIONE 212

DIMENSIONI 214

DATI TECNICI 215

SPIEGAZIONE DELLA CLASSE DI PROTEZIONE IP 216

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 217

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFLAMMABILI 217

SMALTIMENTO 217

DICHIARAZIONI DEL PRODUTTORE 217

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX /

CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 220

6

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

You have made the right choice!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is availab-

le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

The product is a device for event technology!

This product has been developed for professional use in the field of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualified users with specialist knowledge of event

technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or states that can lead to damage to property and/or the environment.

7

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open or modify the unit.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the unit fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the mains cable of the device is damaged, do not operate the device.

4. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not operate the unit if it has been exposed to large temperature ﬂuctuations

(for example, after transport). Moisture and condensation can damage the device.

Switch on the device only when it has reached room temperature.

8

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the unit. If the device has a voltage selector switch, do not

connect the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the unit from the mains at all poles, it is not sufficient to press the

on/off switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the unit.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the specified maximum output current on units with Power Out connec-

tion. Ensure that the total current consumption of all connected devices does not

exceed the specified value.

7. Replace pluggable mains cables only with original cables.

HAZARD:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of

persons (including children) with reduced physical, sensory or mental capabilities.

2. Danger from falling down! Make sure that the device is securely installed and will

not fall down. Only use suitable stands or mounts (particularly for fixed installa-

tions). Ensure that accessories are properly installed and secured. Ensure that

applicable safety regulations are observed.

WARNING:

1. Use the device only in the manner intended.

2. Operate the device only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g.

due to tripping hazards.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

CAUTION:

1. In the case of moving components such as mounting brackets or other moving

components, there is a possibility of jamming.

2. In the case of units with motor-driven components, there is a risk of injury from the

movement of the unit. Sudden movement of the device can cause shock reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

lamp to cool sufficiently before removal, maintenance work and charging etc.

9

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ATTENTION:

1. Do not install or operate the device near any radiators, heat registers, stoves or

other heat sources. Ensure that the device is always installed in such a way that it

is sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the unit.

6. Observe the IP protection class as well as the ambient conditions such as tempera-

ture and humidity according to the specification.

7. Devices can be constantly further developed. In the event of deviating informati-

on on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always takes

priority.

8. The unit is not suitable for tropical climates and for operation above 2000 m above

sea level.

9. Unless explicitly stated, the unit is not suitable for operation in marine conditions.

NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not be repla-

ced by the user. The lamps contained in this lighting unit may only be replaced by the

manufacturer, its service partner, or a similarly qualified person.

SIGNAL TRANSMISSION BY RADIO (E.G. W-DMX OR AUDIO RADIO SYSTEMS):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions.

The following factors can impact range and signal stability, for example:

Shielding (e.g. masonry, metal structures, water)

High volume of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field application with visual contact and without

interference!

The operation of transmission systems is subject to official regulations. These may

vary from region to region and must be checked by the operator before use (e.g. radio

frequency and transmission power).

10

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Devices with wireless signal transmission are not suitable for use in sensitive areas in

which radio operation can lead to potential detrimental effects. These include:

• Hospitals, health centres or other healthcare facilities that provide patient treat-

ment with skilled personnel and equipment.

• Hazardous areas Class I, II and III

• Restricted areas

• Military facilities

• Aircraft or vehicles

• Areas where the use of mobile phones is prohibited

TRANSMISSION VIA W-DMX

WARNING: Ingeneral, wireless DMX transmission must not be used for applications

with safety-related factors that could result in personal injury or property damage in the

event of failure .

This applies in particular to moving scene or traverse structures, DMX-controlled mo-

tors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic systems

or comparable moving components.

Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-

technic devices, explosion-driven effects, or to control gas or liquid effects. These

include CO2 cannons, confetti shooters, water effects or similar.

NOTES ON PORTABLE OUTDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed for temporary

operation.

2. Continuous operation or permanent structural installation – particularly outdoors –

can impair the function, surfaces and seals and accelerate material fatigue.

3. Damage to the surface coating can impair the device‘s corrosion protection.

Damaged surface coating (e.g. scratches) must be promptly repaired by suitable

measures.

INCLUDED

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

The packaging includes:

X 1 x S2 IP Softlight spotlight

X 1 x U-bracket (pre-assembled)

X 1 x Omega double bracket

X 1 x standard diffuser disc (pre-assembled)

X 1 x 28 mm TV spigot incl. fastening screw M10 plus disc spring and washer

X 1x Power cord

X User manual

11

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

INTRODUCTION

LED SOFTLIGHT PANEL - IP65

CLS2IP

CONTROL FUNCTIONS:

1 CH DIM, 2CH DIM 16bit, 2CH CCT, 4CH CCT, 3CH RGB, 4CH RGBW, 8CH RGBW 16bit, 6CH HSI-

CCT, 7CH Preset, 7CH RGB-CCT, 7CH Direct, 10CH Direct-CCT, 10CH HSI-CCT, 16CH Direct-CCT,

18CH Full Access, 6CH x y and 16CH Pixel DMX control

DMX512.

ArtNet

sACN

W-DMX™

RDM

Master / slave operation

Standalone functions

FEATURES:

Protection class IP65. RGB+WW colour spectrum. 272 0.5 W LEDs per colour (4 x 272). DMX512.

ArtNet. sACN. W-DMX™. 5-pin DMX connectors. RJ45 connectors. Blackout button. Push-button

with direct access to the CCT operating mode. 2 freely assignable user buttons. U-bracket and

28 mm TV spigot included. One standard diffuser panel included. Extensive range of optional

accessories.

The spotlight features the RDM standard (Remote Device Management). This remote device ma-

nagement enables the status query and configuration of RDM end devices via an RDM-capable

controller, such as the optionally available Cameo UNICON (item number CLIREMOTE).

The Cameo UNICON also allows access to the entire fixture menu.

12

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

CCT

BLACKOUT

USER 2

USER 1

ENTER

ESC

DIM

SELECT

CCT

BLACKOUT

USER 2

USER 1

ENTER

ESC

DIM

SELECT

CCT

BLACKOUT

USER 2

USER 1

ENTER

ESC

DIM

SELECT

1 2

3 4

5 6

7

8

9 10 11

12 13

14 15

16

17

18

1 POWER IN

IP65 mains input socket with rubber sealing cap (TRUE1 compatible). Operating voltage 100–240

V AC/50–60 Hz. Connection via supplied power cable (when not in use, always close with rubber

sealing cap).

2 POWER OUT

IP65 mains output socket with rubber sealing cap (TRUE1 compatible). Facilitates power supply to

other CAMEO spotlights. Ensure that the total current consumption of all connected devices does

not exceed the value specified on the device in amperes (A) (when not in use, always close with

the rubber sealing cap).

13

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

3 DMX IN

Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console; when not in

use, always close with the rubber sealing cap).

4 DMX OUT

Female IP65 5-pin XLR socket for sending DMX control signal (when not in use, always close with

the rubber sealing cap).

5 NET IN

RJ45 network connector with IP65 protection for connecting to an ArtNet or sACN network. Use

IP65 category CAT-5e or better cable to set up the network (always close with the rubber sealing

cap when not in use).

6 NET OUT

RJ45 network connection with IP65 protection for forwarding the control signal. Use IP65 category CAT-

5e or better cable to set up the network (always close with the rubber sealing cap when not in use).

7 BATTERY IN

Male 4-pin XLR socket with IP65 protection for connecting external batteries (always close with

the rubber sealing cap when not in use; batteries not included). A double V-mount adapter with

connection cable is optionally available (item number CLSVMOUNTAP).

8 LC DISPLAY

The LC display shows the currently activated operating mode (main display), the menu items in

the menu and the numerical value or operating status in certain menu items. If no entry is made

within approximately one minute, the display automatically changes to the main display. Note on

the main display in the operating modes with external control: As soon as the control signal is

interrupted, the characters in the display start flashing; if the control signal is present again, the

flashing stops.

9 DIM / SELECT / ENTER

Rotary-push encoder for the adjustment and control of the spotlight.

DIM - In the stand-alone modes CCT, HSI, Direct LED, Colour Coordinates, Gel, User Colour, Play

Loop and Light Simulation, the encoder has the function of the master dimmer (turn encoder).

SELECT - Turn the encoder to select the menu items on the menu level and change a value in a

menu item (e.g. DMX start address).

ENTER - 1. Pressing ENTER takes you to the menu level for selecting the operating mode. 2. You

move down one level in the menu structure. 3. Press ENTER to confirm a value or status change,

such as changing the DMX start address.

14

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

10 The function of the middle turn-push encoder (turn and push) is shown in the corresponding

menu item in the centre of the display (line centre = turn, line bottom = push).

11 ESC - If the press function of the right-hand rotary-push encoder is not explicitly shown at

the bottom right of the display, pressing the encoder has the function of moving up one level in

the menu structure.

12 BLACKOUT

Shortcut button with blackout function. Press the button to activate Blackout. Press the button

again to deactivate Blackout.

13 CCT

Shortcut button for direct access to stand-alone CCT mode.

14 USER 1

Button 1 can be freely assigned with a stand-alone operating mode (see menu item Settings ->

User Buttons).

15 USER 2

Button 2 can be freely assigned with a stand-alone operating mode (see menu item Settings ->

User Buttons).

16 W-DMX

Antenna for W-DMX™ control.

17 CARRY HANDLE

Ergonomic carrying handle for comfortable transport.

18 SECURING LUG

Use a suitable safety rope to secure the spotlight when mounting it overhead.

OPERATION

PLEASE NOTE

When the spotlight is started, "Welcome to Cameo", the model name and the software version are

shown in the display for a short time. After this process, the spotlight is ready for operation and

the previously activated operating mode is launched.

15

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

DISPLAY MAIN DISPLAY IN DMX MODE

The main display in DMX mode shows the currently set DMX start address, DMX mode and other

information (see illustration).

= DMX signal is present = no DMX signal

Currently activated operating mode

W-DMX status

DMX mode

DMX start address

next free DMX start address

Press encoder =

Selection of the operating mode

Press encoder =

Open main menu (Menu)

DISPLAY MAIN DISPLAY IN THE ARTNET OR SACN OPERATING MODE

The main display in Artnet or sACN mode shows the DMX mode, the currently set DMX start

address, the IP address and universe group and the universe (see illustration).

Currently activated operating mode

W-DMX status

DMX mode

DMX start address

IP address

Universe and group

Press encoder =

Selection of the operating mode

Press encoder =

Open main menu (Menu)

W-DMX™

To pair a W-DMX receiver with a W-DMX compatible transmitter, W-DMX must be switched on in

the Settings menu of the receiver under Wireless Settings (WDMX State -> On), the unit must be

configured as a receiver (Operating Mode -> Receive) and the command Reset must be executed

(Receive Reset -> Yes). The receiver is now in pairing standby and waiting for a pairing request

from a transmitter. Start the pairing by selecting Link in the menu of the transmitter and confir-

ming; the pairing now takes place automatically. In the same way, several receivers can be paired

simultaneously or one after the other to a transmitter (e.g. for master/slave operation). A W-DMX

connection is always maintained until the connection is disconnected by means of the Reset com-

mand in the receiver or the Unlink command in the transmitter, regardless of whether a device

has been disconnected from the power supply in the meantime.

16

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

W-DMX™ STATUS

W-DMX

deactivated

W-DMX

as receiver

activated,

not paired

W-DMX

as receiver

activated

and

paired,

Transmitter

switched off

or out of

range

W-DMX

as receiver

activated

and

paired,

no

DMX signal

W-DMX

as receiver

activated

and

paired,

DMX signal

is present

W-DMX

as trans-

mitter

with G3

standard

activated,

DMX signal

is present

W-DMX

as trans-

mitter

with G4s

standard

activated,

DMX signal

is present

W-DMX

as trans-

mitter

with G3

standard

activated,

no

DMX signal

W-DMX

as trans-

mitter

with G4s

standard

activated,

no

DMX signal

SETTING DMX START ADDRESS (DMX address)

Starting from the main display, press the rotary-push encoder to enter the main menu. Turn the

left encoder (SELECT) to select the menu item DMX Address (note the selection arrow on the left)

and confirm by pressing the encoder (ENTER). You can now configure the DMX start address as

required by rotating the encoder (the highest value depends on the selected DMX mode). Confirm

the entry by pressing the left encoder (ENTER), this also automatically takes you back to the main

display and the DMX operating mode is activated. At the same time, the DMX start address follo-

wing the selected start address plus the channel number of the selected DMX mode is displayed

(Next Free Address). The menu item for selecting the desired DMX mode can be reached directly

from the menu item DMX Address by pressing the middle rotary-push encoder (DMX mode); the

previously set DMX start address is automatically saved.

CONFIGURING DMX MODE (DMX Mode)

Starting from the main display, press the rotary-push encoder to enter the main menu (MENU).

Turn the left encoder (SELECT) to select the menu item DMX Mode (note the selection arrow on

the left) and confirm by pressing the left encoder (ENTER). Now you can select the desired DMX

mode by turning the left encoder. Confirm the selection by pressing the left encoder (ENTER), this

also automatically takes you back to the main display and the DMX operating mode is activated.

The menu item for setting the desired DMX start address can be reached directly from the menu

item DMX Mode by pressing the middle rotary-push encoder (DMX Address); the previously

selected DMX mode is automatically saved. Tables with the channel assignment of the different

DMX modes can be found in these instructions under DMX CONTROL.

ENABLE EXTERNAL CONTROL VIA DMX, ARTNET AND SACN

Starting from the main display, press the left-hand rotary-push encoder to access the menu for

selecting the operating mode. Turn the left encoder (SELECT) to select DMX (note the selection arrow

on the left) and confirm by pressing the left encoder (ENTER). Now the control protocol that was

preselected in the menu item Protocol in the main menu is activated (DMX512 / Artnet / sACN).

To configure the two control protocols Artnet and sACN as desired, press the right encoder (Menu),

then select Protocol and confirm (Enter). Select the desired protocol, confirm, now select the

submenu items for setting and confirm again (see table).

17

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

Protocol Artnet and sACN

Select by turning the encoder, conﬁrm by pressing, change value or status by turning, conﬁrm

by pressing. Back with ESC.

Universe Setting the Universe 000–255

Universe Group Setting the Universe Group 000–127

DMX Address Setting the DMX start address 001–512

DMX Mode Selecting the DMX mode 1CH Dim ... 16CH Pixel

IP Address

Setting the IP address:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

4. Set block with right encoder

xxx.xxx.xxx.xxx.xxx

IP Address Press the left encoder to save (Enter) xxx.xxx.xxx.xxx.xxx

Subnet Mask

Setting the subnet mask:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

xxx.xxx.xxx.xxx.xxx

4. Set block with right encoder

Press left encoder to save (Enter) xxx.xxx.xxx.xxx.xxx

Signal Routing

Forwarding the control signal via XLR Out Send to XLR

Forwarding the control signal via W-DMX Send to WDMX

Forwarding the control signal via XLR Out

and W-DMX Send to Both

Control via XLR with Artnet or sACN signal

interruption Backup by XLR

STANDALONE OPERATING MODE CCT (Correlated Colour Temperature)

Starting from the main display, press the left-hand rotary-push encoder to access the menu for

selecting the operating mode. Turn the left encoder (SELECT) to select CCT (note the selection

arrow on the left) and confirm by pressing the left encoder (ENTER). You can now set the bright-

ness (DIM), colour temperature (CCT) and hue (Tint) by turning the three rotary-push encoders

(see illustration).

Turn encoder =

Set brightness (DIM)

Press encoder =

Selection of the operating mode

Turn encoder =

Setting the colour tone (Tint)

Press encoder =

Open main menu (Menu)

Turn encoder =

Set colour temperature (CCT)

18

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

STANDALONE OPERATING MODE HSI (Hue - Saturation - Intensity)

Starting from the main display, press the left-hand rotary-push encoder to access the menu for

selecting the operating mode. Turn the left encoder (SELECT) to select HSI (note the selection ar-

row on the left) and confirm by pressing the left encoder (ENTER). You can now set the brightness

(DIM), hue (HUE) and saturation (SAT) by turning the three rotary-push encoders (see illustration).

Turn encoder =

Set brightness (DIM)

Press encoder =

Selection of the operating mode

Turn encoder =

Set saturation (SAT)

Press encoder =

Open main menu (Menu)

Turn encoder =

Setting the colour tone (HUE)

STANDALONE OPERATING MODE DIRECT LED (RGBW colour mixing)

Starting from the main display, press the left-hand rotary-push encoder to access the menu

for selecting the operating mode. Turn the left encoder (SELECT) to select Direct LED (note the

selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the total

brightness (DIM) and the intensity of R, G, B and W using the three rotary-push encoders (see

illustration).

Turn encoder =

Set overall brightness (DIM)

Press encoder =

Selection of the operating mode

Turn encoder =

Set the brightness of G or W

Press encoder =

Open main menu (Menu)

Turn encoder =

Set the brightness of R or B

Press encoder =

switch between R+G and B+W (Next Colours)

STANDALONE OPERATING TYPE COLOURCOORDINATES

Starting from the main display, press the left-hand rotary-push encoder to access the menu for

selecting the operating mode. Turn the left encoder (SELECT) to select Colour Coordinates (note

the selection arrow on the left) and confirm by pressing the left encoder (ENTER). You now set

the overall brightness (DIM) and the x and y coordinates with the help of the three rotary-push

encoders (see illustration).

19

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

Turn encoder =

Set overall brightness (DIM)

Press encoder =

Selection of the operating mode

Turn encoder =

Set digit 3 and 4 after the decimal point

Press encoder =

Open main menu (Menu)

Turn encoder =

Set digit 1 and 2 after the decimal point

Press encoder =

switch between x and y (Next Coordinate)

STANDALONE MODE COLOUR PRESETS (GEL)

Starting from the main display, press the left-hand rotary-push encoder to access the menu for

selecting the operating mode. Turn the left encoder (SELECT) to select GEL (note the selection

arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the overall bright-

ness (DIM) using the left encoder and select one of the available Lee-Filter colour presets (Dark

Magenta to Rose Pink) using the middle rotary-push encoder (see illustration).

Turn encoder =

Set overall brightness (DIM)

Press encoder =

Selection of the operating mode

Press encoder =

Open main menu (Menu)

Turn encoder =

Select colour preset

STANDALONE OPERATING MODE USER COLOURS (User Colour)

Starting from the main display, press the left-hand rotary-push encoder to access the menu

for selecting the operating mode. Turn the left encoder (SELECT) to select User Colour (note

the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the

brightness (DIM) using the left encoder and select one of the eight user colours (USER_COLOUR_1

to USER_COLOUR_8) using the middle rotary-push encoder (see illustration). The user colours can

be edited individually (Main Menu -> Edit User Colour).

20

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Turn encoder =

Set overall brightness (DIM)

Press encoder =

Selection of the operating mode

Press encoder =

Open main menu (Menu)

Turn encoder =

Select user colour

EDIT STANDALONE OPERATING MODE USER COLOUR (Edit User Colour)

Starting from the main display, press the rotary-push encoder to enter the main menu (MENU).

Turn the left encoder (SELECT) to select the menu item Edit User Colour (note the selection ar-

row on the left) and confirm by pressing the left encoder (ENTER). Now you can select one of the

8 user colours by turning the left encoder and confirm the selection by pressing the left encoder

(ENTER).

Now give the user colour an individual name of up to 12 digits by turning the left encoder to select

a letter, the underscore or a number for the first digit of the name and confirm by pressing the left

encoder. This is followed by the input for the second digit and so on. When the name is complete,

press the middle encoder (Save&Next) to move to the next editing step. If you press "Save&Next"

before selecting a letter, the underscore, or a number for the first digit, the previous name is

retained and you move immediately to the next editing step.

Now decide in which way you want to create the user colour, select the desired mode by turning

the left encoder (SELECT) (CCT, HSI, DIRECT, GEL and Coordinates) and confirm by pressing the

left encoder (ENTER).

Strona się ładuje...

Cameo S2 IP Instrukcja obsługi

Cameo S2 IP Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty