SUPAIR ALTIRANDO 3 Instrukcja obsługi

User’s manual

Harness

SUP’AIR - VLD

34 rue Adrastée

Parc Altaïs

74650 Annecy - Chavanod

FRANCE

45°54.024’N / 06°04.725’E

English

Revision index : 07/02/2019

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 2

ank you for choosing the ALTIRANDO3 har-

ness. We are glad to be able to share our com-

mon paragliding passion with you.

SUP’AIR has been designing, producing and

selling free ying equipment since 1984. By

choosing a SUP’AIR product you benet from

almost thirty years of expertise, innovation and

listening. Our mission statement: research and

develop to constantly enhance our product line.

We hope you will nd this user’s manual com-

prehensive, explicit and hopefully enjoyable as

well. We advise you to read it carefully.

You will nd the lastest udated information

about this product on our website www.supair.

com. If you have further inquiries, feel free to

ask one of our retailers for answers. And natu-

rally, the entire SUP’AIR team is at your disposal

at info@supair.com

We wish you many safe enjoyable ying hours

and happy landings.

Team SUP’AIR

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 3

List of contents

Introduction 4

Technical specications 5

Size choice 6

Components list 7

Equipment overview 8

Accessories assembly 9

Carabiners 9

Seat-plate 10

Speed-bar system 11

Foot-rest 12

Installing the reserve parachute 13

Necessary equipment 13

POD reserve parachute handle connection 13

Parachute risers – harness connection 13

Parachute risers – reserve parachute connection 15

Reserve parachute characteristics 16

Adjusting the container 16

Installing the reserve parachute in its container 17

Gear packing and tips 18

Adjustments 19

e various adjustments 19

Adjusting the harness 20

Wing/harness connection 21

Inight behavior 22

Flight phases 23

Pre-Flight check 23

Takeo 23

In ight 24

Speed-bar use 24

Landing 24

Using the reserve parachute 25

Towing 25

Mandatory thorough checkup 25

Maintenance 25

Harness cleaning and maintenance 26

Storage and transport 26

Product longevity 26

Repairs 27

Spare parts 27

Materials 27

Recycling 27

Warranty 28

Disclaimer 28

Pilot’s gear 28

Service Book 29

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 4

Welcome to the paragliding world according to SUPAIR; a world of shared passion.

e ALTIRANDO3 targets enthused pilots of all levels.

It was designed with schooling and fun in mind to provide full comfort and a worry free learning curve.

harness was certied EN 1651: 1999 and LTF 91/09

Indicating that it meets European and German safety requirements.

Aer reading this manual, check your harness during a hang-test to fully adjust it before your rst ight.

Introduction

N.B : ree important icons will help you when reading this manual

Advice Caution ! Danger !!

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 5

A

B

C

D

E

F

S M L XL

Pilot size (cm) 155 -175 170 -185 180 -195 190 - 205

Pilot weight (mini - maxi) (kg) 60 - 80 65 - 85 70 - 100 90 - 120

Harness weight (+carabiners+speedbar)(g) 3 710 3 750 3 810 3 890

Designed for paragliding only

Backrest height (cm) A57 64 70 75

Backrest tilt adjustments (cm) B35 37 38 41

Seat depth (cm) C46 47 48 50

Seat width (cm) D35 37 39 41

Hooking point height. (cm) E44 45 46 47

Length between the hooking points. (cm) F40-53 40-53 40-53 40-53

Impact damping system: Airbag Ye s

Impact damping system: Bumpair No

Certication Yes : EN 1651 : 1999 and LTF 91/09

Tandem (Pilot or Passenger) Passenger only

Acrobatic ying Ye s

Releasable carabiners No

Towing Ye s

Reserve parachute pocket volume ( Liters ). (L) 7

Technical specications

ABackrest height.

BBackrest tilt adjustments.

CSeat depth.

DSeat length

EHooking point height.

FLength between the hooking points.

Characteristics Harness size

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 6

Choosing your harness’ size is important. You will nd here below a height/weight table to help you with your size choice. With its hammock archi-

tecture and reclined ying posture, we advise you to try out the harness during a hang-test rst at one of our retailers location to choose the correct

size.

For a complete list of our retailers list click here : www.supair.com

Size choice

Preliminary hang-test.

S

M

L

XL

Size

Weight 1m55 1m60 1m65 1m70 1m75 1m80 1m85 1m90 1m95 2m00 2m05

50 kg S

55 kg S S

60 kg S S S S

65 kg S S S S

70 kg S

75 kg M M M

80 kg M M L

85 kg M L L

90 kg L L L

95 kg XL XL

100 kg XL XL XL

110 kg XL XL XL XL

120 kg XL XL XL XL

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 7

6

2Zicral 30 mm carabiners

Nomenclature

Harness

1

2

Options

Standard double stage accelerator/speed-bar

(réf. : ACCELSOUPLE)

6

7

3

Double stage accelerator/speed-bar (réf. : CA-

LEPIEDRETRACT20)

«ALT3» reserve parachute handle

carbon ber seatplate

4

1

3

5elastic cord for speedbar return

5

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 8

Harness overview

Chest strap with quick release buckles

Safe-T-bar

Leg strap buckle

Chest strap adjustment

Backrest tilt adjustment

Reserve parachute handle

Reserve parachute pocket

Reserve parachute paragliding main hooking points

Reserve parachute hooking points

AIRBAG

AIRBAG air intake

2

1

3

4

5

7

8

9

10

13

14

Radio and small storage pocket

15

Back storage pocket

16

Speed-bar/Accelerator recoiling cord

17

Shoulder straps adjustments

6

Speed-bar/Accelerator pulleys

Speed-bar/Accelerator tube

11

12

Recoil Speed-bar/Accelerator “D” buckle

18

Foot-rest buckle

19

2

1

3

4

5

6

8

10

11

12

14

15

17

18

19

6

7

99

10

13

19

Volume adjustment zipping panel

20

1

3

16

20 20

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 9

Accessories assembly

1. Carabiners

Zicral 30 mm carabiners.

Compatible carabiners:

Réf. : MAILCOMOUS30

21

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 10

Accessories assembly

2. carbon ber seatplate

Seat plate description.

Front

Rear

Installing the seat plate.

Carbon ber seat-plate

Size S Réf. : MPPL005

Size M Réf. : MPPL006

Size L Réf. : MPPL007

Size XL Réf. : MPPL008

Prole view.

Top

Bottom

1. Face the harness. Grab the upper layer end of the seating area and pull it toward you.

Reach inside the seat-plate pocket and pull the leg straps rearward to give enough room to

insert and sandwich the seat plate between them.

2. Sandwich the seat-plate between the leg straps and push it, leading edge rst, all the way

inside the seat-plate pocket.

Bring the leg straps back to their default length by pulling them forward toward the front of

the seat.

Flight direction.

Front view.

Flight direction.

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 11

Accessories assembly

3. Speed-bar system

STANDARD double stage speed-bar/accelerator.

Compatible speed-bar/accelerator :

Ref. : ACCELSOUPLE

Speedbar assembly :

Regarding either side of the harness:

1. Push the speed-bar/Accelerator line through the tube

located at the front side of the harness

2. Push the speed-bar/Accelerator’s cord through the pul-

ley located on the lateral panel.

3. Push the elasticated cord through the plastic “D” shaped

buckle and connect the plastic clip to the elasticated cord.

4. Finally, attach a hook to the cord before connecting it to the

glider’s speed-bar/accelerator.

5. Simulate the speed-bar/accelerator’s functionality by sliding the

cord back and forth.

2

1

3

4

2

1

3

4

ere are two Velcros® to keep the speed-bar/accelerators

without elastic cord in place.

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 12

Accessories assembly

>> 4. Foot-rest (option)

1. Push the foot-rest strap through

buckle located at the front of the har-

ness’s side skirt.

2. Push the elastic under the guide.

3. Wrap and connect the elastic around the main strap while pushing it through buckle.

4. Adjust the foot-rest length during a hang-test and stow away the straps excess in the elasticated holder.

1

2

3

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 13

Single reserve parachute handle

ank you for reading the following carefully ! We recommend for the initial rescue parachute assembly and installation to be made by a qualied

professional.

Reserve parachute folding and installation inside the harness must conform to the specic guidelines found in this manual.

Installing the reserve parachute

Necessary equipment needed to install the reserve parachute.

B

C

A

F

Connecting the handle to the rescue parachute’s deployment bag.

1. Fasten the handle strap to the POD’s

middle loop by making a loop to loop (

Lark’s head ) knot.

2. Tighten the han-

dle/POD connection

securely.

D

Reserve parachute handle : POIALT3)

Reserve parachute inside its deployment bag and folded according the

manufacturer’s specications

Parachute rigging lines

B

C

A

w

First, open the riser guiding sleeve all the way from top to bottom to access the

reserve parachute connection loops.

Once the riser guiding sleeve is fully opened, the zipper tab must be located on the

same side of the reserve parachute pocket.

>> Access to the reserve parachute connection points.

Riser/Harness connection:

Opening direction

«Y» or separated riser set

Toric rings

One 7mm rectangular Maillon Rapide® + two 6mm if you have a «Y» riser setup

F

G

E

D

E

G

If you have a large reserve

parachute, and feel a slight

resistance during the

pod extraction hang-test,

connect the reserve para-

chute handle to the side loop

instead.

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 14

Installing the reserve parachute

Reserve parachute/harness connection.

ALTIRANDO3 riser connection with individual separated risers.

1. - Attach each riser to the

shoulder attachment points

by making a Lark’s knot (

loop to loop connection ).

Use the largest bridle loop

ends.

2. - Assemble everything cor-

rectly.

- Make sure for the risers not to

be longer than one another.

- Tighten each connection

securely.

w

M

w

M

w

M

w

M

Loop to loop connection ( Lark’s knot ) of the ALTIRANDO3 harness using square steel links 6mm ( Maillon Rapide® ) for a separate or “Y” riser setup.

w

M

w

M

w

M

w

M

w

M

3. - Push the end riser

through the toric ring

- Push the maillon through

the risers buckles

4. - Give a second twist to

the plastic ring

- Push the buckle through

the maillon

6. - Repeat the sequence on the

other side of the harness

2. - Open the 7mm square Maillon Rapide®

- Connect the bridle’s loop to the Maillon Rapide®

- Push the maillon through the plastic ring

- Twist

1. - Two maillon Rapide® 6mm and two toric exible rings are needed

5. - Tidy up the assembly

- Be certain for the riser end loops to

be securely fastened

- Close the Maillon Rapides® by hand

rst

- Tighten it using pliers by making a

clockwise 1/4 turn

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

w

M

e reserve parachute riser installation will vary with the risers type you use.

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 15

Installing the reserve parachute

1. - Open the 7mm square

Maillon Rapide®

- Push the maillon through the

risers loops

- Push the maillon through the

plastic ring

- Twist

3. - Give a second twist to the

plastic ring.

- Push the buckle through the

maillon.

2. - Push the riser loop

through the toric ring.

- Push the maillon through

the riser loop

4. - If you use separate/inde-

pendente risers: Repeat steps

1 through 3 with the second

riser.

5. - Tidy up the assembly.

- Be certain for the riser end

loops to be securely fastened.

- Close the Maillon Rapide®

tightly by hand.

- Tighten using pliers and

making a ¼ turn.

One (1) square 7mm Maillon Rapide® will be needed + two (2 exible toric rings.

>> Position the risers - Place the risers inside their guiding/protec-

tive sleeve connected alongside the harness.

- Push them through and under the zipper

tab.

- Bring them out through the reserve para-

chute container.

- Close the Zip to the tab above the le shoul-

der.

M

Reserve parachute/harness connection. :

A

Closing direction.

Reserve parachute/risers. :

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 16

Installing the reserve parachute

A

B

G

Upper ap

C

H

Grommet (2)

D

I

E

J

Reserve parachute risers.

- One (big) ap dorsal pocket

- Locking via cables

- Handle «ALT3» ( Ref.: ALT3 )

- 3 - 7,5 liters Grommet (3)

KReserve parachute handle.

Reserve parachute surplus lines ( about 1

meter ).

Reserve parachute folded in its POD.

Rescue parachute pocket characteristics :

Reserve parachute single riser.

Cord (1)

Cord (4)

FGrommet (5)

AB

C

D

G

H

I

E

J

K

F

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 17

Adjusting the reserve parachute pocket:

Large size parachute

A panel/ap ( red on the illustration ), is located on the inside of the reserve parachute container ( green on the illustration ), to adapt its volume to your reserve

parachute size.

e Velcro® ( black on the illustration ) enables the panel/ap to be secured in place.

Moving the panel/

ap

Parachute

Container

Panel/Flap

>>Sliced view >> 3D view

Small size para-

chute

If the emergency parachute does

not have a snug t inside the rescue

pocket, it could potentially rotateon

itself while using the harness.

e risers then roll up around the

rescue parachute pod handle and

prevent a deployment.

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 18

Installing the reserve parachute

Installing the reserve parachute in its container.

1. - Place the reserve parachute inside

the container, with the handle positioned

upward, and parachute risers downward.

2. - Take a small piece of line to help with the installation procedure.

- Push it through loop #1.

- Using a piece of cord, pull loop (1) through grommet (2) and then (3).

- Using another piece of cord, pull loop (4) through grommet (5).

3. - Secure the installation by pushing the right side of

the yellow cable through the loop cord #1

- Secure the installation by pushing the le side of the

yellow cable through the loop cord #4

Carefully remove the line.

4. - Fasten the reserve parachute handle to the Velcro®

- Push and secure the two ends of the reserve parachute

handle inside the Lycra® openings located beneath the

grommets.

Check the

completed

installation

during a

hang-test.

Have the installation checked by a

professional outt.

Conduct an extraction test every

six ( 6 ) months to assure proper

system functionality.

Note: conducting and extraction

test does not imply deploying the

reserve parachutewhich will stay

inside its POD.

1

2

3

4

5

1

2

3

4

5

1

4

1

4

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 19

Gear packing and tips

Radio pocket ( with safety

lanyard ) and storage pocket.

Back storage pocket

Hydration tube opening.

>> Fold the foot-rest fastener

When ying without a foot-rest,

fold the fastening side panel

inward, and keep it in place with

the snap button located on the

inner side of the skirt. Foot-rest holder

Velcro® Mini-Vario

support.

• Load straps

• Compression straps

• Water bottle side pockets

• Waist strap pockets

During the pre-ight check, do not

overstu the storage area, and organize

the load distribution, not to obstruct

the air intake.

Flap

Must be opened to switch to backpack mode. It can

also be used as a second storage compartment for

miscellaneous gear (clothing).

>> Turning the AirBag into a backpack.

- Empty the AirBag

- Open the ap.

- Open th dorsal storage pocket

- Flip the bag around the harness

- Stow away the wing and accessories inside the bag

>> Regarding the backpack.

>> Harness side :

Harness User’s manual

SUP’AIR _ALTIRANDO3_Page 20

Adjusting the harness prior each takeo is vital.

Adjusting the harness

Adjusting the chest strap

Adjusting the backrest

Adjusting the shoulder straps

>> e various adjustments

2

1

3

4Adjusting the leg straps

2

1

33

44

Seat-plate tilt adjustment

Seat depth adjustment

5

6

5

6

Strona się ładuje...

SUPAIR ALTIRANDO 3 Instrukcja obsługi

SUPAIR ALTIRANDO 3 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty