Accuride UCT20199014 Specyfikacja

Typ
Specyfikacja
2019
Richelieu
Accuride
UCT20199014
UCT20199014
GENERAL INSTRUCTIONS
NOTE:
Mounting bracket adjusts vertically in 7/16" increments. (Figure 2)
Cabinet member
Step 1: Attach brackets to slide at desired height and position (inboard /outboard) using
self-taping screws. Cabinet member to be mounted parallel to drawer sides.
Step 2:
Position slide so the front of the cabinet member is 1/8" behind the drawer front
when the drawer is in the closed position.
Step 3: Locate screw holes for mounting brackets on the underside of desk top (or
equivalent mounting surface). See column "A" on chart for this dimension.
A. FOR BRACKETS FACING OUT
Use the width of the drawer plus 2-1/32" for bracket screw hole centers. (Figure 2)
B. FOR BRACKETS FACING IN
Use the width of the drawer minus 1/8" for bracket screw hole centers. (Figure 3)
NOTE:
Tighten screws on one side, then open and close (cycle) drawer a few times to be
certain the slides have self adjusted to a parallel movement and are moving freely.
Tighten screws on the other side of the drawer.
Step 4:
Adjust height of drawer and install remaining screws in moving member.
Drawer member
Separate slide members by depressing the lever release.Step 1:
Locate the screw holes on drawer 1-5/8" (min.) below the underside of the desk
top of bracket at its lowest position.
Step 2:
Position the front of the slide member 1/8" behind the drawer front. Install drawer
member to drawer through vertical mounting slots. Secure with #8 pan head
screws. (Figure 1)
Step 3:
Coulisse pour clavier d'ordinateur 14"
Keyboard slide 14"
FIGURE 1
AVANT / FRONT
1/8"
PIÈCES COULISSANTES
MOVING MEMBER
FIGURE 2
SURFACE
DU
TIROIR
DESK
TOP
LARGEUR DU TIROIR
DRAWER WIDTH (W)
1-5/8" min.
2-15/16" max.
W + 2-1/32"
SUPPORTS EXTÉRIEURS
BRACKETS OUTBOARD
SURFACE
DU
TIROIR
DESK
TOP
LARGEUR DU TIROIR
DRAWER WIDTH (W)
FIGURE 3
SUPPORTS EXTÉRIEURS
BRACKETS OUTBOARD
1-5/8" min.
2-15/16" max.
W - 1/8"
AVANT/
FRONT
SUPPORT MOBILE
VARIABLE BRACKET
PARTIE FIXE
STATIONARY MEMBER
1/8"
FIGURE 4
2019
Richelieu
Accuride
UCT20199014
Coulisse pour clavier d'ordinateur 14"
Keyboard slide 14"
  • Page 1 1
  • Page 2 2

Accuride UCT20199014 Specyfikacja

Typ
Specyfikacja

w innych językach