Novus NVR-6208-H1 Instrukcja obsługi

U s er ’ s ma n u a l

Manual for devices with firmware version 1.4.1

6000 series IP recorders

2

6000 series IP recorders - User’s manual - version 2.1

PRELIMINARY INFORMATION

This instruction manual contains detailed information concerning the operation of the 6000

series IP recorders.

PRELIMINARY INFORMATION

Pictures in this publication showing camera views can be simulations. Actual camera

images may vary depending on the type, model, settings, observation area, or

environmental conditions.

The company AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. has made every effort to

ensure that the information contained in this publication is comprehensive, accurate and

current.

However, due to the continuous development of the product line, graphic design, menu

layout or function descriptions contained in this publication may differ from those

implemented in your device. This does not limit or void this manual.

The following chapters describe all the functionalities present in the 6000 series IP

recorders. However, depending on your recorder model and/or firmware version, some of

the functions may be unavailable or not supported.

Technical data of the recorder, construction description, disk mounting method, first start

of the recorder and basic operation are included in the “Quick Start Guide” attached to

the recorder. When using this “User's Manual”, always have a quick start guide nearby so

that you can refer to it in matters not described in the user’s manual.

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. 
 
3 
6000 series IP recorders - User’s manual - version 2.1 
 
SHORTCUTS 
SHORTCUTS 
Auxiliary monitor output (Secondary output). 
The SPOT auxiliary monitor output  is  inactive  by default  (i.e.  it  does  not display any images). To 
display an image on it, you must configure a view or sequence for this output. The configuration of 
the auxiliary monitor output is described in Menu “Output Settings” on page 55. 
Face comparison. 
The recorder  configuration for  face  comparison  is  a  multi-step  process.  To  properly configure  this 
option should be: 
•  Enable and configure face detection ( “Face Detection” menu on page 13) 
•  Configure response options for face detection ( “Face Detection” menu page 36) 
•  Configure face comparison options ( “Face Match” menu page 33) 
•  Configure face base ( “Target Database Management” menu page 71) 
Creating disk arrays. 
In recorders that allow  mounting several disks,  it  is  possible to build a disk  array. Creating  a  disk 
array allows you to increase reliability and fault tolerance. Creating a disk array is described in the 
“Disk Mode”  menu and in the “Array”  menu on page 43. A description of the individual types of 
RAID arrays is provided in the appendix “RAID Arrays” on page 91. 
Archiving of recordings. 
Recordings  from  the  recorder  can  be  archived  on  external  media.  The  recorder  provides  AVI  and 
Private formats for archiving. To ensure the safety of recordings, it is recommended to use the Private 
format. For more information on archiving recordings, see the appendix “Archiving  of  recordings” 
on page 97. 
Mobile application. 
The recorder allows access to recordings remotely, using a smartphone via a mobile application. A 
description  of  the  application's  configuration  and  operation  is  provided  in  the  appendix  “Mobile 
application” on page 103. 

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. 
 

series IP recorders - User’s manual - version 2.1 
„Start” menu  ............................................................................................................. 7 
”Settings” menu ......................................................................................................... 7 
1. „Camera” menu ................................................................................................ 8 
1.1. “Manage Camera” settings group ................................................................. 8 
1.2. “Add Camera” settings group ....................................................................... 9 
1.3. “Image” settings group ............................................................................... 11 
1.4. “Motion Settings” settings group ............................................................... 12 
1.5. “Smart Settings” settings group ................................................................. 13 
1.6. “PTZ” settings group .................................................................................. 21 
2. “Record” menu ................................................................................................ 24 
2.1. “Record” settings group ............................................................................. 24 
2.2. “Encode Parameters” settings group .......................................................... 26 
2.3. “Stream Settings” settings group ................................................................ 27 
2.4. “Record Schedule” settings group .............................................................. 28 
2.5. “Record Status” settings group ................................................................... 30 
3. “Alarm” menu  ................................................................................................ 31 
3.1. “Event Notification” settings group ........................................................... 31 
3.2. “Smart Event” settings group ..................................................................... 33 
3.3. “Motion Alarm” settings group .................................................................. 37 
3.4. “Combination Alarm” settings group ......................................................... 38 
3.5. “Sensor Alarm” settings group ................................................................... 39 
3.6. “Exception” settings group ......................................................................... 39 
3.7. “Alarm Status” settings group .................................................................... 40 
4. “Disk” menu .................................................................................................... 41 
4.1. “Disk Management” settings group ........................................................... 41 
4.2. “Storage Mode” settings group .................................................................. 44 
4.3. “Disk” settings group ................................................................................. 45 
5. “Network” menu ............................................................................................. 45 
5.1. “Network” settings group ........................................................................... 45 
5.2. “Network Status” settings group ................................................................ 48 
6. “Account and Authority” menu ..................................................................... 49 
6.1. “Account” settings group ........................................................................... 49 
6.2. “Security” settings group ........................................................................... 53 
6.4. “User Status” settings group ...................................................................... 54 
7. “System” menu  ............................................................................................... 54 
7.1. “Basic” settings group ................................................................................ 54 
7.2. “Maintenance” settings group .................................................................... 57 
7.3. “Information” settings group ...................................................................... 58 
“Search and Backup” menu .................................................................................... 59 
1. “By Time-sliced Image” settings group ........................................................ 59 
2. “By Time” settings group .............................................................................. 62 
3. “By Event” settings group ............................................................................. 63 
4. “Tag Management” settings group ................................................................ 65 
5. “Image Management” settings group ............................................................ 65 
6. “Backup Status” settings group ..................................................................... 66 
TABLE OF CONTENTS 

5

6000 series IP recorders - User’s manual - version 2.1

4. “Playback” menu ..................................................................................................... 67

5. “Intelligent Analytics” menu .................................................................................. 71

5.1. “Target Database” settings group ..................................................................... 71

5.2. “Smart Search” settings group .......................................................................... 74

5.3. “Statistics” settings group ................................................................................. 79

5.4. „Face Attendance” settings group ..................................................................... 80

5.5. „Face Check In” settings group ........................................................................ 81

6. Recorder operation using the browser .................................................................. 82

6.1. Minimal PC configuration for browser connections ......................................... 82

6.2. Network connection via browser ...................................................................... 82

6.3. Live display panel ............................................................................................. 83

6.4. “Playback” menu ............................................................................................... 88

6.5. “Search and Backup” menu ............................................................................... 89

6.6. “Intelligent Analysis” menu .............................................................................. 90

6.7. “Function Panel” menu ..................................................................................... 90

7. Supplement - RAID disk arrays ............................................................................. 91

7.1. General information .......................................................................................... 91

7.2. RAID levels ....................................................................................................... 91

7.2.1. RAID 0 ....................................................................................................... 91

7.2.2. RAID 1 ....................................................................................................... 92

7.2.3. RAID 5 ....................................................................................................... 92

7.2.4. RAID 6 ....................................................................................................... 93

7.2.5. RAID 10 (1+0) ........................................................................................... 93

7.2.6. „Hot Spare” disk. ........................................................................................ 94

7.3. RAID configuration in 6000 series IP recorders ............................................... 94

7.31. Configuration .............................................................................................. 94

7.3.2. Rebuilding the disk array ........................................................................... 95

7.3.3. Estimated recovery time for the RAID array ............................................. 96

7.3.4. Procedure with the RAID array in case of damage of the recorder ........... 97

8. Supplement - Archiving of recordings .................................................................... 97

8.1. Archiving of recordings on a USB drive .......................................................... 97

8.2. Moving and playing back the archive on a PC ................................................. 98

8.3. Player options .................................................................................................. 101

9. Supplement - mobile application ........................................................................... 103

9.1. Installation and initial configuration ............................................................... 103

9.2. Adding the device to the application .............................................................. 104

9.3. Basic operation ................................................................................................ 105

9.3.1. Landscape mode ....................................................................................... 105

9.3.2. Portrait mode ............................................................................................ 105

9.3.2.1. Application configuration menu ....................................................... 106

9.3.2.2. Remote playback menu .................................................................... 107

9.3.2.3. Additional menu options .................................................................. 108

TABLE OF CONTENTS

6000 series IP recorders - User’s manual - version 2.1

6

6000 series IP recorders - User’s manual - version 2.1

7

1. “Start” menu

The start menu gives access to all recorder functions. The menu is displayed after pressing the button in

the lower left corner of the screen. Menu options are available to the logged in user.

2. “Settings” menu

This menu allows to modify all main recorder settings.

RECORDER'S MENU - „START MENU”

- logs in/logs out the user into the recorder menu

- button to display the start menu

- displays the recorder shutdown window. Available options : Logout,

Reboot, Shutdown

- displays the settings menu. Description of the menu in the

chapter 2. “Settings” menu

- displays the playback menu. Description of the menu in the chapter 4.

“Playback” menu

- displays the search and archive wizard. Description of the

menu in the chapter 3. “Search and Backup” menu

- displays the image analysis menu. Description of the menu in

the chapter 5. “Intelligent Analytics” menu

- displays the name of the currently logged user

6000 series IP recorders - User’s manual - version 2.1

8

2.1. “Camera” menu

The “Camera” menu allows to search, add to the recorder and edit the parameters of IP cameras. This

menu also allows to configure the parameters of motion detection, image analysis and programming

cruise and presets for PTZ cameras.

2.1.1. “Manage Camera” settings group

This menu contains options for adding, editing, configuring and removing cameras.

“Edit Camera” menu

This menu displays a list of added cameras along with basic information, such as: camera name, IP

address, port, connection status, protocol, model, firmware version (depending on the model). It is

also possible to edit connection parameters (“Edit” button ). For cameras added by “Quickly

Add” with the status “Online” it is only possible to edit the camera name, for cameras added manually

or with the status “Offline” it is possible to edit all connection parameters. This menu also allows to

update the firmware on 3000 and 6000 series cameras. To remove the camera from the list, use the

delete button.

“Edit Camera Group” menu

This menu allows to create and manage camera groups. Cameras are grouped to create mini-

sequences (cameras collected in the group are displayed sequentially in the selected channel window).

To create a group, press the “Add group” button. Then in the add window, you define the group name,

sequence time and add cameras to the group.

The mini-sequence is started in the “View” menu (on the right side of the live view window). In this

menu, click on the “Single Channel Sequences” bar to display available groups. Then select in the live

view window the channel, on which we want to run the mini-sequence and double-click the name of

the selected group. The mini-sequence is turned off by right-clicking on the mini-sequence channel

and selecting the “Close Dwell” option.

“IP Planning” menu

This menu allows to manage cameras and recorders in the local network. Individual and group change

of network parameters of cameras, and adding cameras to the recorder is possible. In the case of

recorders, it is possible to add/remove cameras, change the IP address, change the administrator login

data and enable the buzzer in the device location.

RECORDER'S MENU - “CAMERA - MANAGE CAMERA”

The mini-sequence can be run on any channel window, even empty.

6000 series IP recorders - User’s manual - version 2.1

9

2.1.2. “Add Camera” settings group

This menu allows to add cameras and channels of other recorders to the recorder. It is also possible to

edit camera network parameters. The add window also displays information from the recorder

network card about the available bandwidth.

“Quickly Add” menu

After selecting this menu, the recorder automatically searches and displays available cameras.

The camera is added by selecting it in the list and click “Add” button. It is possible to select multiple

cameras and add them a few at a time, and modification of network parameters cameras.

The “Default password” button allows to set default login details for various protocols used by the

recorder to connect to cameras, which significantly speeds up and simplifies the process of adding

cameras, especially with a larger number of them.

RECORDER'S MENU - “CAMERA - ADD CAMERA”

In recorders equipped with PoE ports, configuration should be started by connecting cameras to

PoE ports. The NOVUS 3000 and 6000 series cameras will be automatically detected and added.

Cameras of other series require, before connecting, setting the IP address compatible with the

addressing range, set for the internal Ethernet port of the recorder (default 10.151.151.1). Then

enter the username and password for the camera.

Please note that adding a camera not connected to PoE ports (located on the network) takes a

logical channel for connecting the camera to the PoE port. If the camera is blocking the channel

for the camera in the PoE port, remove it from the configuration and add it after detecting the

camera connected to the PoE port.

6000 series IP recorders - User’s manual - version 2.1

10

“Add Manually” menu

This menu allows you to manually create a camera in the system by providing its IP address, data port,

login data and communication protocol.

“Add Recorder” menu

This menu allows to add channels of another recorder working in the same network.

Adding a recorder is done by selecting it on the list and clicking the “Add” button. The next window

will be displayed, presenting the list of channels of the selected recorder. After selecting the desired

cameras, click OK. The window will close and the added channels will be shown in the editing

window.

The “Manual add” button allows you to manually add a recorder by entering its IP address, data port,

login data and communication protocol.

RECORDER'S MENU - “CAMERA - ADD CAMERA”

Only NOVUS 3000 or 6000 series recorders can be added.

6000 series IP recorders - User’s manual - version 2.1

11

2.1.3. “Image” settings group

This menu allows to modify settings and adjust images in added cameras.

“OSD Settings” menu

This menu allows to set the channel name. It is also possible to enable / disable the channel name

display, as well as change the format and enable / disable the date and time display. To change the

position of the OSD on the image, click and hold the left mouse button on the red border, move the

OSD to the desired location. To save the settings, press the “Apply” button.

“Image Settings” menu

In this menu, we can set image parameters such as brightness, contrast, saturation, hue and other,

depending on the camera. Use the “Default” button to set default image values.

“Mask Settings” menu

This menu allows to set privacy zones. To set the zone, press the “Draw” button and holding the left

mouse button pressed, select the appropriate area on the image. Then enable the mask by selecting

“On” from the “Mask” drop-down list. To save the settings, press the “Apply” button.

“Fisheye Settings” menu

This menu contains image settings for fisheye cameras. You can select the display mode and specify

the camera installation location.

“Audio Settings” menu

This menu allows you to configure audio recording. You can select the audio codec and the audio

input / source.

RECORDER'S MENU - “CAMERA - IMAGE”

The range of available settings and adjustments may vary depending on the camera type /

model / manufacturer.

It is possible to set up to four privacy zones (masks).

6000 series IP recorders - User’s manual - version 2.1

12

2.1.4. “Motion Settings” settings group

This menu allows you to configure the motion detection function.

Configuring motion detection starts by selecting a camera from the list. Then set the zone: select the

appropriate area on the image, holding the left mouse button pressed. The “All” button can be used to

select the entire image, and the “Clear” button can be used to remove the entire selection. The

“Reverse” button replaces selected and unselected areas. Then, using the “Sensitivity” slider, set the

detection sensitivity level, and select the duration of the alarm from the “Duration” list. After making

these settings, enable motion detection by selecting “On” from the “Motion” list and save the settings

with the “Apply” button.

After configuring motion detection, press the “Processing Mode” button to go to the “Alarm Handling

Settings” window for setting the response to the motion detection event.

In the window it is possible to set the motion detection schedule, the rules for recording the detection

event, as well as to set the response to the occurrence of motion detection:

• Snapshot - performing saving snapshot

• Push - enables sending push messages to the user's mobile device

• Alarm-out - activation of alarm outputs in camera or recorder

• Preset - selects the preset for PTZ cameras

• Buzzer - enabling the sound signaller

• Pop-up Video - displays the image in a window appearing on the screen

• E-mail - sends an email notification

RECORDER'S MENU - “CAMERA - MOTION SETTINGS”

For cameras other than Novus 3000 or 6000 series, motion detection or some of its options may

not be available.

6000 series IP recorders - User’s manual - version 2.1

13

2.1.5. “Smart Settings” settings group

This menu allows to configure and manage the functions of advanced image analysis.

“Face detection” menu

This menu allows to configure the recorder to detect people's faces in the detection zone.

The configuration of the option begins with selecting the camera from the list. Then set the detection

area by moving the cursor on the preview window with the left mouse button pressed, turn on the

option by selecting “On” in the “Face Detection” column and specify the duration of the alarm. It is

also possible to enable recording of the scene image and / or saving information about the detected

face. Settings are saved with the “Apply” button.

After configuring the face detection option, press the “Processing Mode” button, to go to the event

response setting window.

Setting the response is described in the “Alarm - Face Detection” menu on page 36.

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

Advanced image analysis functions are only active for Novus 3000 or 6000 series IP cameras,

that support image analysis functions.

For proper and effective operation of the advanced image analysis function, in addition to proper

configuration, it is necessary to mount cameras in the right way and provide them with the right

working conditions. To do this, read the directions in the “VCA_6000VSS_PL Instrukcja

konfiguracji i obsługi funkcji analizy obrazu kamer Novus serii 6000 VSS.pdf” manual available

for download on the product page (instructions available in Polish).

The set zone is not visible in the live view window.

6000 series IP recorders - User’s manual - version 2.1

14

“Crowd density” menu

The menu allows to configure the recorder to detect the number of people in the detection zone.

The configuration of the option begins with selecting the camera from the list. Then mark the detection

area by moving the cursor on the preview window with the left mouse button pressed, turn on the

option by selecting “On” in the “Crowd density” column and specify the duration of the alarm. You

should also set the measurement refresh rate and alarm threshold. Settings are saved with the “Apply”

button.

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

The set area is not visible in the live view window.

6000 series IP recorders - User’s manual - version 2.1

15

“People Intrusion” menu

This menu allows configuring the recorder to detect object intrusion into the camera's field of view.

The configuration of the option begins with selecting the camera from the list. Then turn on the option

by selecting “On” in the “People Intrusion” column and specify the duration of the alarm and

sensitivity. Settings are saved with the “Apply” button.

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

6000 series IP recorders - User’s manual - version 2.1

16

“People Counting” menu

This menu allows to configure the recorder to perform the function of counting incoming or outgoing

people.

The configuration of the option begins with selecting the camera from the list. Then mark the detection

area by moving the cursor on the preview window with the left mouse button pressed, turn on the

option by selecting “On” in the “People counting” column and specify the duration of the alarm and

detection sensitivity. You should also set the length of the statistical cycle, i.e. the period after which

the counter is reset, the entry threshold and the exit threshold (setting the alarm level for persons

entering and leaving respectively) and the retention threshold (setting the alarm level for persons

remaining inside the monitored object, calculated by the camera on based on inputs and outputs

numbers).

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

Counters showing the number of people are not visible in the live view window.

6000 series IP recorders - User’s manual - version 2.1

17

“Object Detection” menu

This menu allows the recorder to be configured to perform object detection in a specific detection

zone.

The configuration of the option begins with selecting the camera from the list. Then mark the

detection area by clicking the left mouse button on the corners of the created area and turn on the

option by selecting “On” in the “Object detection” column. Then the duration of the alarm after

detection of the object and the detection mode are determined (i.e. it is determined whether the alarm

is to be triggered by leaving the object or disappearing). In the “Area” column you can select the next

zone to configure (in total four zones are available). Each zone can have its own name.

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

The set areas are not visible in the live view window.

6000 series IP recorders - User’s manual - version 2.1

18

“Exception” menu

The menu allows to configure the recorder to detect camera tampering attempts.

The configuration of the option begins with selecting the camera from the list. Next, the duration of the

alarm after the event is determined, and the type of event that will trigger the alarm. Available options

are: “Scene change” - allows you to generate an alarm after changing the scene observed by the camera

(eg due to its obstruction or rotation), “Video Blurred” - allows you to generate an alarm after detecting

image defocus and “Video Color Cast” - generates alarm after detecting a change in the color of the

observed area. The sensitivity of detection is set in the “Sensitivity” column.

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

6000 series IP recorders - User’s manual - version 2.1

19

“Tripwire” menu

The menu allows configuring the recorder to detect an object crossing a designated line.

The configuration of the option begins with selecting the camera from the list. Then the detection line

is set, by clicking the left mouse button on the preview window in the selected place, and dragging the

mouse with the button held down. In the place where the end of the line should be, release the button.

Turn the option on by selecting “On” in the “Tripwire” column. Then we determine the duration of the

alarm after detecting the object and the direction of movement of the object that will trigger the alarm.

In the “Line” column. you can select the next line to configure (a total of four lines are available).

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

The set detection lines are not visible in the live view window.

6000 series IP recorders - User’s manual - version 2.1

20

“Intrusion” menu

The menu allows to configure the recorder to detect violation by the object of the designated zone.

The configuration of the option begins with selecting the camera from the list. Then mark the detection

area by clicking the left mouse button on the corners of the created area and turn on the option by

selecting “On” in the “Intrusion” column. Then the duration of the alarm after detection of the object.

In the “Area” column you can select the next zone to configure (in total four zones are available). Each

zone can have its own name.

After configuring the option, press the “Processing Mode” button to go to the event response setting

window. The response is set up in the same way as the motion detection response option (page 12).

RECORDER'S MENU - “CAMERA - SMART SETTINGS”

The set areas are not visible in the live view window.

Strona jest ładowana ...

Novus NVR-6208-H1 Instrukcja obsługi

Novus NVR-6208-H1 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty