Novus NVIP-4H-4231/WLAD Instrukcja obsługi

User manual

version 1.6

4000 series IP cameras

4000 series IP cameras User manual version 1.6

2

1. WWW INTERFACE ...................................................................................................... 5

1.1. Remote viewing window view - main page ...................................................... 5

2. CAMERA OPERATION MODE - PLAYBACK ......................................................... 7

Description of the player's operation for the selected “General” option ................. 7

Description of the player's operation for the selected “Picture” option ................... 9

Description of the player's operation for the selected “Tag” option ...................... 10

Description of the player's operation for the selected “AI” option ........................ 11

3. CAMERA CONFIGURATION - REMOTE SETTING ............................................ 19

3.1. “Channels/Video” group of settings ......................................................................... 19

3.1.1. “Live” menu ................................................................................................. 19

3.1.2. “Image Control” menu ................................................................................. 19

3.1.3. “Video Cover” menu. .................................................................................. 22

3.1.4. “ROI” menu. ................................................................................................ 23

3.2. “Streams/Record” group of settings ......................................................................... 24

3.2.1. “Encoding” menu .......................................................................................... 24

3.2.2. “Record” menu ............................................................................................. 25

3.2.3. “Capture” menu ............................................................................................ 25

3.3. “Alarms” group of settings ..................................................................................... 25

3.3.1. “Setup” menu ............................................................................................... 25

3.3.2. “Alarms” menu ............................................................................................. 27

3.3.3. “Event notifications” menu .......................................................................... 28

3.3.4. “Video Tampering” menu ............................................................................ 29

3.4. “AI” group of settings ............................................................................................. 29

3.4.1. “Setup” menu ................................................................................................ 29

3.4.2. “Recognition” menu ..................................................................................... 46

3.4.3. “Alarms” menu ............................................................................................. 50

3.4.4. “Statistics” menu .......................................................................................... 55

3.5. “Network” group of settings .................................................................................... 58

3.5.1. “General” menu ............................................................................................ 58

3.5.2. “Email” menu ............................................................................................... 60

3.5.3. “FTP” menu .................................................................................................. 60

3.5.4. “RTSP” menu ............................................................................................... 60

3.5.5. “DDNS” menu .............................................................................................. 61

3.5.6. “HTTPS” menu ............................................................................................. 61

3.5.7. “IP Filter” menu ............................................................................................ 61

3.6. “Device” group of settings ....................................................................................... 61

3.6.1. “HDD” menu ................................................................................................ 61

3.6.2. “Audio” menu ............................................................................................... 62

3.6.3. “Cloud storage” menu................................................................................... 62

3.7. “System” group of settings ....................................................................................... 63

3.7.1. “General/Time” menu ................................................................................... 63

3.7.2. “Users” menu ................................................................................................ 63

3.7.3. “Maintain” menu .......................................................................................... 64

3.7.4. “Info” menu .................................................................................................. 66

TABLE OF CONTENTS

4000 series IP cameras User manual version 1.6

3

4000 series IP cameras User manual version 1.6

4

PRELIMINARY INFORMATION

This user manual contains detailed information on how to operate the 4000 series IP cameras.

References in this publication of photos the camera and images can be simulations. The

actual images from the cameras may vary depending on the type, model, settings,

observation area or external conditions.

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. has made every effort to ensure that the

information contained in this publication is complete, accurate and up-to-date.

However, due to the continuous development of the product line, the appearance of

graphics, menu layout or function descriptions contained in this publication may differ

from those implemented in your device. This does not limit or invalidate this manual.

The following chapters describe all the functionalities of the 4000 series IP cameras.

However, depending on the camera model and/or firmware version, some of the functions

may not be available, not supported or the scope of operation may differ from that

described. Detailed information about the camera's functions are contained in the catalog

card on the website www.aat.pl, and in the “Quick User's Manual” attached to the camera.

Technical data of the cameras, construction description, method of installation, start-up

and basic operation are included in the “Quick Start Guide” attached to the camera. When

using this “User’s manual”, always have the quick reference guide close at hand so that

you can refer to it for matters not covered in the instructions for use.

4000 series IP cameras User manual version 1.6

5

WWW INTERFACE - MAIN WINDOW

1. WWW INTERFACE

1.1. Remote viewing window view - main page

1. Selecting a stream to display in the remote view window.

2. Live Preview window.

3. Buttons for selecting the operating mode and configure the camera:

4. Icon to access to the camera

The view of the remote view window and its menu shown on this and the following pages are

displayed in Internet Explorer with the “Surveillance PluginV2.exe” plug-in installed and run

with administrator privileges. When connecting to the camera from browsers using HTML5

(applies to cameras supporting this standard), some menu items and/or some options may not be

available. This is not a bug, but is a specificity of the HTML5 standard.

The description of the remote preview window, all its elements and functions can be found in

the quick start guide attached to the camera. For information on these parts and functions, please

refer to the quick start guide that came with your device. The quick start guide is also available

for download in the product card at www.aat.pl

7

6

3 4

1

5

2

4000 series IP cameras User manual version 1.6

6

WWW INTERFACE - MAIN WINDOW

5. Buttons activating information and control panels

6. Picture control buttons

7. Additional features control icons

- enables the video analytics event alarm display panel

The panel displays image analytics events such as facial

recognition and events with the classification of objects (vehicle-

person distinction). Details about e.g. the recognized person are

displayed under the event.

Settings button - allows you to select an event to be

displayed in the panel

Delete button - deletes events from the panel.

Note: closing the panel or going to the camera menu also clears

the displayed events.

- enable the image adjustment panel - enable the lens control panel

The panel allows to adjust the field of view

(zoom) and focus. The “Autofocus” button

allows you to sharpen the image, “Restore” -

performs lens initialization (after completion,

set the desired zoom and focus), and

“Refresh” refreshes the settings.

The panel allows to adjust the color tone,

brightness, contrast, color saturation and

sharpness (clarity). The “Default” button

restores the factory settings, and the

“Refresh” button refreshes the settings.

4000 series IP cameras User manual version 1.6

7

2. CAMERA OPERATION - PLAYBACK

Playback tab allows to play and manage recordings that the camera saves to the memory card.

1. Player configuration - allows you to select the type of recordings to be played. From the

“General” drop-down list, select the type of recordings: the “General” option allows you to play

back normal recordings, alarm events and standard image analysis, “Picture” displays photos

taken by the screenshot function, “Tag” allows you to play back fragments of recordings

marked by the user, and the “AI” option allows you to search for recognized faces, people and

vehicles.

Description of the player's operation for the selected “General” option

After selecting the “General” option, select the date from which the recordings are to be played

from the “Date” drop-down list. A calendar will be displayed allowing you to select a specific

date. Days with available recordings are marked with a red underline. After selecting the day, in

the “Search type” section, select the type of recordings to be played. Selecting the “All Type”

option allows to search for all types of recordings. The “Normal” option allows to search for

normal recordings. The “Event” option allows to search for alarm event recordings. Developing

this option allows you to select a specific type of event. The “AI” option allows you to search for

image analysis recordings and, similarly to the “Events” option - drop-down this option allows to

select a specific type of event. The “Attribute Detection” option allows to search for recordings

of face attribute detection events (i.e. the presence or absence of a mask). After configuring the

player, press the “Search” button to search for recordings.

WWW INTERFACE - GENERAL PLAYBACK

5. 4. 2. 3.

1.

4000 series IP cameras User manual version 1.6

8

2. Recordings timeline. After searching for recordings, a graphical representation of them will be

displayed in the timeline. The colors in the timeline correspond to the type of recording as shown

in the legend below the axis. User can change the range of time axis for precise selection of

recordings - using the mouse wheel or using the zoom buttons on the left side of the

timeline.

2. A player control buttons, from left:

- Play/Pause button

- Stop button

- Forward-one-frame button

- Record button allows to save the video being played back to your computer. Recording takes

place in real time and ends when the button is pressed again.

- Capture button to save on your computer currently displayed frame as a picture

- Download button allows to download a block of recordings. After pressing, an additional

window opens in which it is possible to select the appropriate block of recordings to be

downloaded.

The maximum block size is approximately 254 MB. After selecting the block covering the time

range you are interested in, press the “Start Download” button to download the recordings. The

window may close after the download has started.

- button for changing the playback speed. After pressing it, the options for choosing the playback

speed, from x1/8 to x16, are displayed

- button to enable/disable the recorded sound from recordings

- a button adding a standard tag (without the possibility to edit the name)

- button adding a user tag (allows you give your own name)

WWW INTERFACE - „GENERAL PLAYBACK”

4000 series IP cameras User manual version 1.6

9

WWW INTERFACE - „DISPLAYING PICTURES”

4. Preview window. Double-clicking by left mouse button on the preview window enables and

disables displaying of the image on the full screen.

5. Additional function buttons, from left:

- Zoom button enables and disables the zooming part of the image. Zooming is done by selecting

the part of the image with the mouse left button pressed. Pressing the right button restores the

original image size.

- sets the original aspect ratio

- fits the image to the browser window

- sets full screen

Description of the player's operation for the selected “Picture” option

This option allows to search and manage pictures taken by the screenshot option. From the “Date”

calendar, select the day from which the pictures are to be searched. Days when recordings are available

are marked with a red underline. After selecting the day and specifying the time range (default 24

hours), in the “Search Type” section, select the type of pictures to be searched. Checking the “All

Type” option allows you to search for all types of photos. The “Normal” option allows you to search

for photos from normal recordings. The “Events” option allows you to search for photos from alarm

event recordings. Expanding this option allows you to select a specific type of event. After configuring

the player, press the “Search” button to search for photos.

2

1

4000 series IP cameras User manual version 1.6

10

WWW INTERFACE - „TAG SEARCH”

1. Search settings panel.

2. Search results presentation window. Thumbnails of found pictures are displayed. The date the

picture was taken is displayed in the header of each one. Double-clicking the left mouse button on

the thumbnail of the picture starts playback of a fragment of the recording from the moment of

taking the picture. By clicking on the download icon to the right of the header, you can save

the photo to your computer.

Description of the player's operation for the selected option “Tag”

This option allows to search and manage fragments of recordings selected by the user with tags. The

camera menu allows user to set markers both when viewing the live image and during playback.

Placing a marker marks a recording with a duration of about 1 minute.

1. Search settings panel.

The “Start time” and “End time” options allow you to set the time range in which you want the

search to take place. The “Keyword” option allows you to enter a keyword that narrows down the

search scope, e.g. a tag name. After configuring all options, press the “Search” button to search for

recordings. The search results will be displayed in the search results presentation window.

2. Search results presentation window. The list of tags found is displayed. It is possible to play the

selected part of the recording, edit the name of the tag or delete it.

2

1

4000 series IP cameras User manual version 1.6

11

WWW INTERFACE - „AI PLAYBACK”

Description of the player's operation for the selected “AI” option

This option allows you to search and manage recordings that contain image analysis events. Searching

for recognized faces, people or vehicles, zone violations or line crossings, and attendance can be used

as criteria.

“Face detection” search menu

This menu allows to search for recordings containing faces, and also to compare them with the face

patterns stored in the database.

1. Search settings panel.

The “Start time” and “End time” options allow to set the time range in which the search is to take

place. The “Face Attribute” option allows to select specific facial features to filter search results.

This allows, for example, to narrow down the group of found faces to male faces, or only to people

with glasses. The “Alarm Group” button displays an additional window, where the face database to

be used for the comparison (all available databases are selected by default) can be selected. Any

combination of filters is possible. After configuring all options, press the “Search” button to search

for faces. Found faces will be displayed in the search results presentation window.

4

2

1

3

4000 series IP cameras User manual version 1.6

12

WWW INTERFACE - „AI PLAYBACK”

2. Comparison settings panel.

The panel allows to configure the options of comparing the found faces with the faces in the

camera database (or in a file). The “Add” button opens a new window that allows to add a face to

the comparison. It is possible to select photos from those captured by the camera or from the

computer disk. After selecting the photo (or photos) in the “Similarity” field, the percentage of

matching faces to be compared with the recognized face can by specified. The higher this

percentage, the greater the similarity of the recognized faces to the pattern. Pressing the

“Compare” button starts the comparison. The percentage of the recognized face matching the

template will be displayed on each photo. Faces, the similarity of which will be less than assumed,

will be removed from the results presentation window.

3. Preview window of face photos selected as the reference for comparison. Clicking on the photo

selects it and pressing the “Delete” button removes it.

4. Search results presentation window. Double clicking on the thumbnail with the left mouse

button starts playback of a fragment of the recording with a given face. Clicking the right button

opens a window with two options: “Play” - starts playback (works in the same way as double-

clicking the left mouse button), and “Quick compare” - allows you to display between the

recognized faces, only belonging to the same person (the face of the person whose quick compare

is enabled, becomes the reference face). Only faces with a match percentage greater than that set in

the “Similarity” field will be displayed as a result of the comparison.

4000 series IP cameras User manual version 1.6

13

WWW INTERFACE - „AI PLAYBACK”

“Human & Vehicle Detection” search menu

This menu allows to search for recordings containing objects recognized as persons and/or vehicles.

1. Search settings panel.

The “Start time” and “End time” options allows to set the time range in which the search is to take

place. The “Detection type” option allows to select the type of objects to be searched. This allows user

to narrow search to people or vehicles. It is also possible to combine filters. After configuring all

options, press the “Search” button to search for objects. The search results will be displayed in the

search results presentation window.

2. Search results presentation window. Thumbnails of found objects are displayed. The headers of each

of them show the date of the recognition and the type of object (person or vehicle). Double-clicking

with the left mouse button on a thumbnail starts playback of a fragment of the recording with a given

object.

2

1

4000 series IP cameras User manual version 1.6

14

WWW INTERFACE - „AI PLAYBACK”

“PID & LCD” search menu

This menu allows to search for recordings containing recognized persons and/or vehicles registered

during the operation of the Perimeter Intrusion Detection and Line Crossing Detection functions.

1. Search settings panel.

The “Start time” and “End time” options allows to set the time range in which the search is to take

place. The “Vigilance” option allows to select which type of analytics are to be searched for (detection

of a line crossing or perimeter intrusion). The “Detection Type” option allows to select people or

vehicles to search. It is also possible to combine filters. After configuring all options, press the

“Search” button to search for objects. The search results will be displayed in the search results

presentation window.

2. Search results presentation window. Thumbnails of found objects are displayed. The headers of each

of them display the date of the recognition, the type of the recognized object (person or vehicle) and

the abbreviation of the name of the image analysis function that recorded this event. Double clicking

the left mouse button on a thumbnail starts playback of a fragment of the recording with a given

object.

2

1

4000 series IP cameras User manual version 1.6

15

“License Plate” search menu

This menu allows to search for recordings containing recognized license plates.

1. Search settings panel.

The “Start time” and “End time” options allows to set the time range in which the search is to take

place. The “Alarm Group” button displays an additional window in which you can select the

license plate database to be used for comparison (all available databases are selected by default).

In the “License Plate” field, you can enter the number of the license plate you want to search for (it

is possible to enter multiple plate numbers to be searched at the same time by pressing the + button

to the right of the field). The “Fault tolerant” option allows you to increase recognition tolerance

by specifying the number of errors allowed. After configuring all the options, press the “Search”

button to search for license plates. The search results will be displayed in the search results

presentation window.

2. Search results presentation window. Thumbnails of found license plates are displayed. In the

header of each of them, the date of recognition is displayed, and below the text with the recognized

registration number. Double-clicking the left mouse button on the thumbnail starts playback of a

fragment of the recording.

WWW INTERFACE - „AI PLAYBACK”

2

1

4000 series IP cameras User manual version 1.6

16

“Repeat customer” search menu

This menu allows to search for recordings containing the recognized face of the same person.

1. Search settings panel.

The “Start time” and “End time” options allow to set the time range in which the search is to take

place. The “Minimum time interval” option allows to specify the minimum time, that must elapse

between consecutive recognition of the same face. As a result, repeated recognitions are eliminated

when a person stays in the recognition area for a long time. In the “Similarity” option, the

percentage of facial compatibility (similarity) above which they are treated as belonging to one

person can be set. The “Face Attribute” option allows to select specific facial features to filter your

search results. This allows, for example, to narrow down the group of found faces to male faces, or

only to people with glasses. The “Alarm group” button displays an additional window where the

face database to be used for the comparison (all available databases are selected by default) can be

selected. Any combination of filters is possible. After configuring all options, press the “Search”

button to search for faces. Found faces will be displayed in the search results presentation window.

2. Search results presentation window. It displays thumbnails of faces that have been recognized

multiple times within a certain time period. Above the thumbnail there is the name of the person

with whom the recognized faces were compared, and under the thumbnail - the number of times

the face was recognized. Double-clicking with the left mouse button on a thumbnail displays

thumbnails of all diagnoses of a given person. In turn, double-clicking the left mouse button on

one of these thumbnails starts playback of a fragment of the recording with a given face.

WWW INTERFACE - „AI PLAYBACK”

2

1

3

4000 series IP cameras User manual version 1.6

17

3. The table summarizing the data of the recognized face.

After selecting one of the thumbnails in the search results presentation window, the collected

recognition dates for a given face are displayed in the table. Pressing the play button in the

“Playback” column starts playing back a section of the recording with that particular face

recognition. There are additional options above the table to help filter the results better: the

“Minimal number of occurrences” option allows you to narrow down the number of results by

discarding less than the specified repeats, and the “Sort type” option allows to sort the thumbnails

according to the number of diagnoses or time of first recognition. The arrow buttons also let you

sort the results in ascending or descending order. Filtering and sorting changes are applied after

pressing the “Refresh” button.

“Face attendance” search menu

This menu allows you to create and present presence statistics. The statistics show the presence of

people analyzed in a specific time period and at specific times.

1. Search settings panel.

From the “Day” drop-down list, select the statistics time range. Selection options: “Day” - only

one day will be analyzed, “Week” - only one week will be analyzed, “Month” - only one month

will be analyzed, “Customize”- allows to define the time range yourself and “Today”- sets the

current day as data source. For the “Day”, “Week” and “Month” options, pressing the arrows

between the date fields below allows to quickly move to the next or previous period of time,

respectively (by default it is always the current one). Regardless of the selected option, clicking on

the date fields displays a calendar that allows to choose the date freely.

WWW INTERFACE - „AI PLAYBACK”

2

1

3

4000 series IP cameras User manual version 1.6

18

The “Import type” drop-down list allows to select the data source: the “By group” option allows to

search from among the faces stored in the databases. By default, all databases are taken into

account (by pressing the “Alarm groups” button, you can select the databases to be searched). The

“By face” option allows to select specific people. After pressing the “Select images” button, a new

window will open in which you can select the people whose statistics are to be searched. After

selecting people's faces, the window closes, and the preview or removal of selected people can be

made after pressing the “Chosen” button. By pressing the button “Select images” again, you can

add people to the group selected earlier. After determining all the criteria, pressing the “Search”

button causes the preparation and display of the statistics.

2. Additional configuration panel for displaying statistics

Above the statistics area, there is an additional configuration panel that allows to set the working

days (by default from Monday to Friday), and the start and end working times. Correctly providing

this data will allow for a graphic presentation of the presence and delays of individual people.

After changing these settings, press the “Refresh” button to update the statistics. The “Export”

button allows you to export the statistics as a CSV file.

3. The area of statistics presentation

The table presents a list of entry and exit statistics for people selected in the settings panel.

Clicking on the selected row displays a graphical representation of the entry and exit times below

the table:

Here, on the timeline, colored lines are marked with the entry and exit times of the selected person:

red means later entering or leaving early, and green - entering and leaving at the appropriate time.

Using the mouse wheel in the timeline area changes the time range displayed.

Clicking on the icon in the “Detail” column will display an additional window with details

of the inputs and outputs of the selected person. The window displays the thumbnails of the faces

captured on entry and exit, along with full frames. The time of the events is also displayed along

with the status. If the person has entered or left several times, the details window will inform you

about it, along with an option to play the video from that moment.

WWW INTERFACE - „AI PLAYBACK”

4000 series IP cameras User manual version 1.6

19

3. CAMERA CONFIGURATION - REMOTE SETTING

This menu allows you to modify and configure all parameters and camera settings available in a given

model. Most of the settings can be changed conveniently and safely by selecting a parameter value

from the drop-down list. In the case of fields that allow to enter your own parameter value, an

acceptable range is given.

However, any changes should be made carefully in order not to lose the stream or communication with

the camera.

3.1. “Channels/Video” group of settings

This menu allows to modify image parameters.

3.1.1. “Live” menu

This menu allows to give the camera its own name, turn on and off the display of the camera name and

date, select the video system and configure the display on the OSD screen (you can set the position of

the subtitles by dragging the mouse). The “Limit 20/25 fps” option reduces the number of frames per

second set in the "Encoding" menu (for all streams) to 20 fps for NTSC (60Hz) or 25 fps for PAL

(50Hz). This is to reduce the risk of image flickering in unfavorable lighting conditions.

The “OSD Self-adaptive” option enables the OSD font color to adapt to the brightness of the

background on which they are currently displayed, so as to maintain legibility.

3.1.2. “Image control” menu

This tab allows to modify the image-related settings.

WWW INTERFACE - „CHANNELS/VIDEO”

In some camera menus, the changes you make are saved automatically, but in most of them you

need to remember to click the Save button for the changes to be visible (or applied).

Cameras have a dynamic menu, which means that the content of menu items may change,

depending on previously selected options or settings.

Enabling this option only reduces the number of frames per second, i.e. its operation will be

visible when the set fps was higher than the limit of the option. After disabling the option, the

number of frames remains at the limit level. It must be changed manually if necessary.

4000 series IP cameras User manual version 1.6

20

Basic options - cameras with white light illuminator

“Operating mode” - selection of the operating mode of the camera. Available options are: Full Color

Mode, Day/Night Mode, Schedule.

In the “Full Color Mode” mode, the camera works all the time in the color mode, and depending

on the lighting conditions, the white light illuminator can be turned on. The operating mode of the

white light illuminator is set in the “White light” option: “Manual” - the illuminator turns on

automatically depending on the lighting conditions and shines with a constant power, set with the

“Light Distance” slider. “Auto” - the illuminator turns on automatically depending on the lighting

conditions and shines with a variable intensity, depending on the external lighting. “Schedule” -

allows to set the lighting schedule of the illuminator. “Off” - the illuminator is turned off.

In the “Day/Night Mode” the camera works in color mode, and in low light conditions it switches

to black and white mode and turns on the IR illuminator. The operating mode of the IR illuminator

is set in the “IR-cut Mode” option:

“Auto” (or “Image”) - the illuminator turns on automatically depending on the lighting conditions.

In this mode, the delay of day-night and night-day switching is set with the “IR-CUT delay” slider,

in the range from 1 to 36 seconds. The “IR-LED” option allows you to select the working mode of

the IR illuminator: “Manual” - the illuminator shines with a constant power, set with the “Low

Beam Light” slider - for IR LEDs with a wide beam angle, suitable for lighting at a short focal

length and “High Beam Light”- for IR LEDs with a narrow beam angle, suitable for illumination at

a long focal length.

For the “Auto” (or “Image”) mode, there is a “Sensitivity” option to adjust the switching level.

“Smart IR” - the illuminator shines with a variable intensity, depending on the external lighting.

“Off” - the illuminator is turned off.

“Day” - the camera works only in the day (color) mode.

“Night” - the camera works only in black and white mode, with the IR illuminator turned on.

“Schedule” - switching between day and night modes is carried out in accordance with the

schedule settings.

In the “Schedule” mode, the camera works in the “Full Color Mode” and “Day/Night mode”.

Switching between modes is carried out in accordance with the schedule settings.

WWW INTERFACE - „CHANNELS/VIDEO”

The “Low Beam Light” and “High Beam Light” adjustments are available depending on the

camera model.

At the highest sensitivity level (3), the LEDs will turn on earlier than at the lowest (0). In other

words, with level (3) selected, the LEDs will turn on when it is brighter outside, than when level

(0) is selected.

Strona jest ładowana ...

Novus NVIP-4H-4231/WLAD Instrukcja obsługi

Novus NVIP-4H-4231/WLAD Instrukcja obsługi

w innych językach

Powiązane dokumenty