Novus NVR-6332-H8/FR Instrukcja obsługi

U s er ’ s ma n u a l

For devices with firmware version 1.4.4

6000 series IP recorders

2

6000 series IP recorders - User’s manual - version 2.1

PRELIMINARY INFORMATION

This instruction manual contains detailed information concerning the operation of the 6000

series IP recorders.

PRELIMINARY INFORMATION

Pictures in this publication showing camera views can be simulations. Actual camera

images may vary depending on the type, model, settings, observation area, or

environmental conditions.

The company AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. has made every effort to

ensure that the information contained in this publication is comprehensive, accurate and

current.

However, due to the continuous development of the product line, graphic design, menu

layout or function descriptions contained in this publication may differ from those

implemented in your device. This does not limit or void this manual.

The following chapters describe all the functionalities present in the 6000 series IP

recorders. However, depending on your recorder model and/or firmware version, some of

the functions may be unavailable or not supported.

Technical data of the recorder, construction description, disk mounting method, first start

of the recorder and basic operation are included in the “Quick Start Guide” attached to

the recorder. When using this “User's Manual”, always have a quick start guide nearby so

that you can refer to it in matters not described in the user’s manual.

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. 
 
3 
6000 series IP recorders - User’s manual - version 2.1 
 
SHORTCUTS 
Auxiliary monitor output (Secondary output). 
The SPOT auxiliary monitor  output  is inactive by default (i.e.  it  does  not  display  any images). To 
display an image on it, you must configure a view or sequence for this output. The configuration of 
the auxiliary monitor output is described in “Output Settings” menu on page 63. 
Detection, recognition and comparison of faces. 
The recorder  configuration  for  face  comparison  is  a multi-step  process.  To  properly configure  this 
option should be: 
•  Enable and configure face detection ( “Face Recognition” menu on page 28) 
•  Configure response options for face detection ( "Detection - Trigger Mode" submenu on 
page 29) 
•  Configure face comparison options ( "Recognition" submenu on page 29) 
•  Configure face base ( “Face database management” menu on page 80) 
Creating disk arrays. 
In recorders that  allow  mounting several disks,  it  is possible to build  a  disk array. Creating a  disk 
array allows  you to increase reliability and fault tolerance. Creating a disk array is described in the 
“Disk” menu on page 48 and in the “Array” menu on page 50. A description of the individual types 
of RAID arrays is provided in the appendix “RAID Arrays” on page 105. 
Archiving of recordings. 
Recordings  from  the  recorder  can  be  archived  on  external  media.  The  recorder  provides  AVI  and 
Private formats for archiving. To ensure the safety of recordings, it is recommended to use the Private 
format. For more information on archiving recordings, see the appendix “Archiving  of  recordings” 
on page 111. 
Mobile application. 
The recorder allows access to recordings remotely, using a smartphone with a mobile application. For 
the description of the application, see the appendix “Mobile application” on page 117. 
Detection, recognition and comparison of license plates. 
The configuration of the recorder for the comparison of license plates also requires several stages of 
preparation. To properly configure this option should be: 
•  Enable and configure license plate detection ( “LPR” menu on page 33) 
•  Configure response options for license plate detection ( "Recognition" submenu on page 34) 
•  Configure license plate database ( “License plate database management” menu on page 83) 

All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. 
 

series IP recorders - User’s manual - version 2.1 
„Start” menu  ............................................................................................................. 7 
”Settings” menu ......................................................................................................... 7 
1. „Camera” menu ................................................................................................ 8 
1.1. “Manage Camera” settings group ................................................................. 8 
1.2. “Add Camera” settings group ....................................................................... 9 
1.3. “Image” settings group ............................................................................... 11 
1.4. “Motion Settings” settings group ............................................................... 12 
1.5. “PTZ” settings group .................................................................................. 13 
2. “Record” menu ................................................................................................ 18 
2.1. “Record” settings group ............................................................................. 18 
2.2. “Encode Parameters” settings group .......................................................... 22 
2.3. “Record status” settings group ................................................................... 23 
3. “AI / Event” menu  .......................................................................................... 24 
3.1. “Event Notification” settings group ........................................................... 24 
3.2. “AI Event” settings group .......................................................................... 27 
3.2.1."Face recognition" menu................................................................... 28 
3.2.2."License plate recognition" menu ..................................................... 33 
3.2.3. „People/Vehicle Perimeter Detection” menu .................................. 37 
3.2.4."More" menu ..................................................................................... 39 
3.3. “General Event” settings group .................................................................. 44 
3.4. “Alarm Status” settings group .................................................................... 47 
4. “Disk” menu .................................................................................................... 48 
4.1. “Disk Management” settings group ........................................................... 48 
4.2. “Storage Mode” settings group .................................................................. 51 
4.3. “Disk” settings group ................................................................................. 52 
5. “Network” menu ............................................................................................. 52 
5.1. “Network” settings group ........................................................................... 52 
5.2. “Stream Settings” settings group ................................................................ 56 
5.3. “Network Status” settings group ................................................................ 56 
6. “Account and Authority” menu ..................................................................... 57 
6.1. “Account” settings group ........................................................................... 57 
6.2. “Security” settings group ........................................................................... 61 
6.3. “User Status” settings group ...................................................................... 62 
7. “System” menu  ............................................................................................... 62 
7.1. “Basic” settings group ................................................................................ 62 
7.2. “Maintenance” settings group .................................................................... 65 
7.3. “Information” settings group ...................................................................... 66 
“Search and Backup” menu .................................................................................... 67 
1. “By Time-sliced Image” settings group ........................................................ 67 
2. “By Time” settings group .............................................................................. 70 
3. “By Event” settings group ............................................................................. 71 
4. “Tag Management” settings group ................................................................ 73 
5. “Image Management” settings group ............................................................ 73 
6. “Backup Status” settings group ..................................................................... 74 
TABLE OF CONTENTS 

5

6000 series IP recorders - User’s manual - version 2.1

4. “Playback” menu ..................................................................................................... 75

5. “Intelligent Analytics” menu .................................................................................. 80

5.1. “Sample Database” settings group .................................................................... 80

Face database management ............................................................................... 80

License plate database management .................................................................. 83

5.2. “Search” settings group ..................................................................................... 84

5.3. “Statistics” settings group ................................................................................. 93

5.4. „Face Attendance” settings group ..................................................................... 94

5.5. „Face Check In” settings group ........................................................................ 95

6. Recorder operation using the browser .................................................................. 96

6.1. Minimal PC configuration for browser connections ......................................... 96

6.2. Network connection via browser ...................................................................... 96

6.3. Live display panel ............................................................................................. 97

6.4. “Playback” menu ............................................................................................. 102

6.5. “Search and Backup” menu ............................................................................. 103

6.6. “Intelligent Analysis” menu ............................................................................ 104

6.7. “Function Panel” menu ................................................................................... 104

7. Supplement - RAID disk arrays ........................................................................... 105

7.1. General information ........................................................................................ 105

7.2. RAID levels ..................................................................................................... 105

7.2.1. RAID 0 ..................................................................................................... 105

7.2.2. RAID 1 ..................................................................................................... 106

7.2.3. RAID 5 ..................................................................................................... 106

7.2.4. RAID 6 ..................................................................................................... 107

7.2.5. RAID 10 (1+0) ......................................................................................... 107

7.2.6. „Hot Spare” disk. ...................................................................................... 108

7.3. RAID configuration in 6000 series IP recorders ............................................. 108

7.31. Configuration ............................................................................................ 108

7.3.2. Rebuilding the disk array ......................................................................... 109

7.3.3. Estimated recovery time for the RAID array ........................................... 110

7.3.4. Procedure with the RAID array in case of damage of the recorder ......... 111

8. Supplement - Archiving of recordings .................................................................. 111

8.1. Archiving of recordings on a USB drive ........................................................ 111

8.2. Moving and playing back the archive on a PC ............................................... 112

8.3. Player options .................................................................................................. 115

9. Supplement - mobile application ........................................................................... 117

9.1. Installation and initial configuration ............................................................... 117

9.2. Adding the device to the application .............................................................. 118

9.3. Basic operation ................................................................................................ 119

9.3.1. Landscape mode ....................................................................................... 119

9.3.2. Portrait mode ............................................................................................ 119

9.3.2.1. Application configuration menu ....................................................... 120

9.3.2.2. Remote playback menu .................................................................... 121

9.3.2.3. Additional menu options .................................................................. 122

TABLE OF CONTENTS

6000 series IP recorders - User’s manual - version 2.1

6

6000 series IP recorders - User’s manual - version 2.1

7

1. “Start” menu

The start menu gives access to all recorder functions. The menu is displayed after pressing the button in

the lower left corner of the screen. Menu options are available to the logged in user.

2. “Settings” menu

This menu allows to modify all main recorder settings.

RECORDER'S MENU - „START MENU”

- logs in/logs out the user into the recorder menu

- button to display the start menu

- displays the recorder shutdown window. Available options : Logout,

Reboot, Shutdown

- displays the settings menu. Description of the menu in the

chapter 2. “Settings” menu

- displays the playback menu. Description of the menu in the chapter 4.

“Playback” menu

- displays the search and archive wizard. Description of the

menu in the chapter 3. “Search and Backup” menu

- displays the image analysis menu. Description of the menu in

the chapter 5. “Intelligent Analytics” menu

- displays the name of the currently logged user

6000 series IP recorders - User’s manual - version 2.1

8

2.1. “Camera” menu

The “Camera” menu allows to search, add to the recorder and edit the parameters of IP cameras. This

menu also allows to configure the parameters of motion detection, image analysis and programming

cruise and presets for PTZ cameras.

2.1.1. “Manage Camera” settings group

This menu contains options for adding, editing, configuring and removing cameras.

“Edit Camera” menu

This menu displays a list of added cameras along with basic information, such as: camera name, IP

address, port, connection status, protocol, model, firmware version (depending on the model). It is

also possible to edit connection parameters (“Edit” button ). For cameras added by “Quickly

Add” with the status “Online” it is only possible to edit the camera name, for cameras added manually

or with the status “Offline” it is possible to edit all connection parameters. This menu also allows to

update the firmware on 3000 and 6000 series cameras. To remove the camera from the list, use the

delete button.

“Edit Camera Group” menu

This menu allows to create and manage camera groups. Cameras are grouped to create mini-

sequences (cameras collected in the group are displayed sequentially in the selected channel window).

To create a group, press the “Add group” button. Then in the add window, you define the group name,

sequence time and add cameras to the group.

The mini-sequence is started using the context menu in the “live display” (menu is displayed on the

right side of the live view window). In this menu, click on the “Single Channel Sequences” bar to

display available groups. Then select in the live view window the channel, on which we want to run

the mini-sequence and double-click the name of the selected group. The mini-sequence is turned off

by right-clicking on the mini-sequence channel and selecting the “Close Dwell” option.

“IP Planning” menu

This menu allows to manage cameras and recorders in the local network. Individual and group change

of network parameters of cameras, and adding cameras to the recorder is possible. In the case of

recorders, it is possible to add/remove cameras, change the IP address, change the administrator login

data and enable the buzzer in the device location.

RECORDER'S MENU - “CAMERA - MANAGE CAMERA”

The mini-sequence can be run on any channel window, even empty.

6000 series IP recorders - User’s manual - version 2.1

9

2.1.2. “Add Camera” settings group

This menu allows to add cameras and channels of other recorders to the recorder. It is also possible to

edit camera network parameters. The add window also displays information from the recorder

network card about the available bandwidth.

“Quickly Add” menu

After selecting this menu, the recorder automatically searches and displays available cameras.

The camera is added by selecting it in the list and click “Add” button. It is possible to select multiple

cameras and add them a few at a time, and modification of network parameters cameras.

The “Default password” button allows to set default login details for various protocols used by the

recorder to connect to cameras, which significantly speeds up and simplifies the process of adding

cameras, especially with a larger number of them.

RECORDER'S MENU - “CAMERA - ADD CAMERA”

In recorders equipped with PoE ports, configuration should be started by connecting cameras to

PoE ports. The NOVUS 3000 and 6000 series cameras will be automatically detected and added.

Cameras of other series require, before connecting, setting the IP address compatible with the

addressing range, set for the internal Ethernet port of the recorder (default 10.151.151.1). Then

enter the username and password for the camera.

Please note that adding a camera not connected to PoE ports (located on the network) takes a

logical channel for connecting the camera to the PoE port. If the camera is blocking the channel

for the camera in the PoE port, remove it from the configuration and add it after detecting the

camera connected to the PoE port.

6000 series IP recorders - User’s manual - version 2.1

10

“Add Manually” menu

This menu allows you to manually create a camera in the system by providing its IP address, data port,

login data and communication protocol.

“Add Recorder” menu

This menu allows to add channels of another recorder working in the same network.

Adding a recorder is done by selecting it on the list and clicking the “Add” button. The next window

will be displayed, presenting the list of channels of the selected recorder. After selecting the desired

cameras, click OK. The window will close and the added channels will be shown in the editing

window.

The “Manual add” button allows you to manually add a recorder by entering its IP address, data port,

login data and communication protocol.

RECORDER'S MENU - “CAMERA - ADD CAMERA”

Only NOVUS 3000 or 6000 series recorders can be added.

6000 series IP recorders - User’s manual - version 2.1

11

2.1.3. “Image” settings group

This menu allows to modify settings and adjust images in added cameras.

“OSD Settings” menu

This menu allows to set the channel name. It is also possible to enable / disable the channel name

display, as well as change the format and enable / disable the date and time display. To change the

position of the OSD on the image, click and hold the left mouse button on the red border, move the

OSD to the desired location.

In this menu it is also possible to add a watermark (in text form), which will be displayed during

playback of recordings from a given channel only, if the recording will not be modified in any way.

To save the settings, press the “Apply” button.

“Image Settings” menu

In this menu, we can set image parameters such as brightness, contrast, saturation, hue and other,

depending on the camera. Use the “Default” button to set default image values.

“Mask Settings” menu

This menu allows to set privacy zones. To set the zone, press the “Draw” button and holding the left

mouse button pressed, select the appropriate area on the image. Then enable the mask by selecting

“On” from the “Mask” drop-down list. To save the settings, press the “Apply” button.

“Fisheye Settings” menu

This menu contains image settings for fisheye cameras. You can select the display mode and specify

the camera installation location.

RECORDER'S MENU - “CAMERA - IMAGE”

The range of available settings and adjustments may vary depending on the camera type /

model / manufacturer.

It is possible to set up to four privacy zones (masks).

6000 series IP recorders - User’s manual - version 2.1

12

2.1.4. “Motion Settings” settings group

This menu allows you to configure the motion detection function.

Configuring motion detection starts by selecting a camera from the list. Then set the zone: select the

appropriate area on the image, holding the left mouse button pressed. The “All” button can be used to

select the entire image, and the “Clear” button can be used to remove the entire selection. The

“Reverse” button replaces selected and unselected areas. Then, using the “Sensitivity” slider, set the

detection sensitivity level, and select the duration of the alarm from the “Duration” list. After making

these settings, enable motion detection by selecting “On” from the “Motion” list and save the settings

with the “Apply” button.

After configuring motion detection, press the “Processing Mode” button to go to the “Alarm Handling

Settings” window for setting the response to the motion detection event (“Motion” menu on page 44).

In the window it is possible to set the motion detection schedule, the rules for recording the detection

event, as well as to set the response to the occurrence of motion detection:

• Snapshot - performing saving snapshot

• Audio - starts playing the audio file

• Push - enables sending push messages to the user's mobile device

• Alarm-out - activation of alarm outputs in camera or recorder

• Preset - selects the preset for PTZ cameras

• Buzzer - enabling the sound signaller

• Pop-up Video - displays the image in a window appearing on the screen

• E-mail - sends an email notification

RECORDER'S MENU - “CAMERA - MOTION SETTINGS”

For cameras other than Novus 3000 or 6000 series, motion detection or some of its options may

not be available.

6000 series IP recorders - User’s manual - version 2.1

13

2.1.5. “PTZ” settings group

This menu allows to configure PTZ options for high speed dome cameras and cameras with

motorzoom lens.

“Preset” menu

The menu allows to set presets on PTZ cameras.

• Adding presets

Adding presets starts by selecting a camera from the “Camera” list. Using the arrow buttons and the

“Zoom”, “Focus” and “Iris” buttons set the desired field of observation, and then press the “Add”

button or the arrow button next to the selected camera (a preset window will appear in which we

press the button ).

In the newly opened preset window, select the preset number from the “Preset” list that you want to

save (you can also give it your own name) and save with “OK”.

In the same way you can add more presets.

RECORDER'S MENU - “CAMERA - PTZ”

6000 series IP recorders - User’s manual - version 2.1

14

• Editing presets

The recorder allows to edit created presets (i.e. save a new position on an existing preset). To edit the

preset, select the camera and preset to edit from the list. Next, use the arrow buttons and “Zoom”,

“Focus” and “Iris” to set a new observation field and press the “Save position” button. You can also

change the preset name. After changing the new name, save the button

• Deleting presets

To delete a preset, select the camera and preset to be removed and press the “Delete” button. An

operation confirmation window will appear in which we press “OK”. Deleting presets is also possible

by pressing the button next to the preset name in the preset list.

“Cruise” menu

The menu allows to program routes in PTZ cameras.

• Adding routes

Adding a route starts by selecting a camera from the list. Then press the arrow button next to the

selected camera, and when the preset window appears, press the button to add a new route.

The route adding window will be displayed:

RECORDER'S MENU - “CAMERA - PTZ”

Before programming the route, you must store at least two presets on your camera.

6000 series IP recorders - User’s manual - version 2.1

15

The “Add preset” button is used to add additional presets to the created route. When adding a preset, its

parameters are defined, i.e. the time camera stays on the given preset and movement speed (these

parameters can also be changed later, by pressing the button in the “Edit” column).

• Editing a route

The recorder allows you to edit created routes. To edit the route, select the camera from the list.

Editable route options will be displayed under the preview window.

If more than one route is added to the camera, the “Cruise” list is used to select the route to be edited -

the table below will display the list of presets included in it with their current parameters.

In the “Cruise name” position, we can change route name. Pressing the edit button next on the preset,

allows to change its parameters, and the delete button removes the preset from the route.

After selecting any preset in the list, you can change the order with the arrow buttons.

RECORDER'S MENU - “CAMERA - PTZ”

This action deletes the preset as part of the route, but does not delete it from the list of presets

saved in the camera.

6000 series IP recorders - User’s manual - version 2.1

16

• Deleting a route

To delete a route, select the camera and then press the button to open the route list window. After

hovering over the name of the route to delete, the delete button will be displayed.

After pressing the button and confirming with “OK” in the confirmation window, the route will be

deleted.

“Cruise Group” menu

The menu allows you to create groups of routes which are then run in a preset order. One cruise group

can be created for each PTZ camera, consisting of up to eight routes. The group is started with the

"Play" button, and stopped with the "Stop" button. The table below the preview window, shows the

routes that make up the group. The delete button removes the selected route from the group.

“Trace” menu

This menu allows you to save (record) your own trace (path), which the camera will then faithfully

repeat. This option differs from the "Cruise” menu in that no presets are needed to create a track: when

creating a path, the camera saves the commands given to it.

• Adding path

Adding a path starts by selecting a camera from the list. Then press the arrow button next to the

selected camera, and when path window appears, press the button to add a new path. You can

also add the path using the "Add" button. A window will open, in which the default name of the new

path will be displayed. The name can be freely changed.

Next, press the "Start Record" button to start recording the path. By using the PTZ control buttons

move the camera in the required manner. After finishing the recording, press the button "Stop Record ".

The path will be saved.

• Playing a path

To play a path, select its number from the "Trace" list and press the "Run trace" button. We stop

playing with the “Stop Trace” button.

• Deleting a path

To delete a path, select the camera and then press the button to open the paths list window. After

hovering over the name of the path to delete, the delete button will be displayed.

After pressing the button and confirming with “OK” in the confirmation window, the path will be

deleted.

The path can also be deleted with the "Delete" button, after selecting its number from the list of paths.

RECORDER'S MENU - “CAMERA - PTZ”

Before setting the cruise group, you must store at least two routes on your camera.

The maximum recording time for a path is 180 seconds.

6000 series IP recorders - User’s manual - version 2.1

17

“Task” menu

This menu allows you to schedule PTZ operation. For each PTZ camera, you can create a set of tasks

and assign a time slot to each of them.

• Adding a task to the schedule

Adding a task begins with selecting a camera from the "Camera" list. Then, from the "Function" list,

select the PTZ function that the camera will perform. We can choose a preset, route, path and

additionally random scanning or boundary scanning. Finally, in the "Start Time" and "End Time"

fields, define the time limits for the function operation and add to the schedule with the "Add" button.

After adding all tasks, go to the schedule window:

The added tasks are inactive, so enable the schedule. The schedule is turned on by pressing the

"Enable" button displayed after pressing the arrow in the "Enable" column. From now on, the

camera waits for the start time of the first set task.

Pressing the edit button in the "Operation" column allows you to modify the selected task. A new

window will open where you can change the start and end times and the PTZ function.

• Deleting the schedule

The recorder does not allow you to delete individual tasks, it is only possible to delete the entire

schedule. To delete the schedule, press the arrow in the "Operation" column and then press the

"Delete All" button.

RECORDER'S MENU - “CAMERA - PTZ”

6000 series IP recorders - User’s manual - version 2.1

18

2.2. “Record” menu

The “Record” menu allows to configure recording modes, recording parameters and schedules.

2.2.1. “Record” settings group

This menu allows to configure the recording modes, pre-alarm and post-alarm recording options.

“Mode settings” menu

This menu allows to configure the recording modes.

RECORDER'S MENU - “RECORD”

One schedule of up to eight tasks can be created for each PTZ camera.

If the times of the created tasks will overlap, i.e. the start time of the next task will be earlier

than the end time of the previous one, the camera will execute the previous task until the set end

time and then move to the next one. If you set two tasks with the same start and end times, the

camera will execute the first task.

Manual PTZ control is possible while the camera is executing schedule tasks. However, when

the operator completes control, the camera will resume its tasks.

The range of tasks that can be set may differ depending on the camera type / model /

manufacturer.

6000 series IP recorders - User’s manual - version 2.1

19

• "Mode" drop-down list - "Auto" option

Selecting the “Auto” option in the “Mode” list allows to use one of the predefined recording

options, visible in the menu. There is a motion detection icon next to the selected option. Clicking on

the icon enables motion detection for each camera working in accordance with the settings of a given

mode.

After clicking on the selected option, a window will open with a list of cameras that work in

accordance with the settings of this mode (by default, these are all cameras added to the recorder).

Two configuration options are displayed above the camera list: "Schedule Record” - allows user to

configure the parameters of the main stream of cameras for continuous recording, and the option

“Motion Record+Sensor Record+AI Record” - allows user to configure the main stream for recording

of alarm events (this option may have a different name, depending on the type of alarm events selected

for recording). When the alarm event recording mode is selected, without the continuous mode, the

"Schedule Record” is not displayed.

After completing the configuration, click “OK” to save the changes.

Clicking the “Advanced” button opens the “Add Record Mode” window, in which you can create your

own predefined recording option.

• "Mode" drop-down list - "Customization" option

Selecting "Customization" in the "Mode" list hides the predefined recording options and opens the

"Schedule Config" window, where the user can apply his own, separate recording schedule to each

camera and each type of alarm event. Schedules can be created and edited after pressing the "Schedule

Management" button.

A description of the settings of “Schedule Config” menu is provided on the next page.

The “Manual Recording Settings” option allows to set the duration of the manual recording in the range

from 1 minute to 5 hours, or - after selecting the “Manual” option - until switched off by the user.

RECORDER'S MENU - “RECORD - MODE SETTINGS”

6000 series IP recorders - User’s manual - version 2.1

20

“Schedule Config” menu

The menu allows to apply predefined or user-created schedules to each camera individually.

“Edit Schedules” menu

This menu allows to edit and delete predefined schedules, as well as create and edit your own

schedules.

RECORDER'S MENU - “RECORD - SCHEDULE CONFIG”

Strona się ładuje...

Novus NVR-6332-H8/FR Instrukcja obsługi

Novus NVR-6332-H8/FR Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty