Novus NVR-6308P8-H1-II Instrukcja obsługi

Typ
Instrukcja obsługi
U s er s ma n u a l
For devices with firmware version 1.4.4
6000 series IP recorders
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
2
6000 series IP recorders - Users manual - version 2.1
PRELIMINARY INFORMATION
This instruction manual contains detailed information concerning the operation of the 6000
series IP recorders.
PRELIMINARY INFORMATION
Pictures in this publication showing camera views can be simulations. Actual camera
images may vary depending on the type, model, settings, observation area, or
environmental conditions.
The company AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o. has made every effort to
ensure that the information contained in this publication is comprehensive, accurate and
current.
However, due to the continuous development of the product line, graphic design, menu
layout or function descriptions contained in this publication may differ from those
implemented in your device. This does not limit or void this manual.
The following chapters describe all the functionalities present in the 6000 series IP
recorders. However, depending on your recorder model and/or firmware version, some of
the functions may be unavailable or not supported.
Technical data of the recorder, construction description, disk mounting method, first start
of the recorder and basic operation are included in the Quick Start Guide attached to
the recorder. When using this User's Manual”, always have a quick start guide nearby so
that you can refer to it in matters not described in the users manual.
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
3
6000 series IP recorders - Users manual - version 2.1
SHORTCUTS
Auxiliary monitor output (Secondary output).
The SPOT auxiliary monitor output is inactive by default (i.e. it does not display any images). To
display an image on it, you must configure a view or sequence for this output. The configuration of
the auxiliary monitor output is described in Output Settingsmenu on page 63.
Detection, recognition and comparison of faces.
The recorder configuration for face comparison is a multi-step process. To properly configure this
option should be:
Enable and configure face detection ( Face Recognitionmenu on page 28)
Configure response options for face detection ( "Detection - Trigger Mode" submenu on
page 29)
Configure face comparison options ( "Recognition" submenu on page 29)
Configure face base ( Face database management menu on page 80)
Creating disk arrays.
In recorders that allow mounting several disks, it is possible to build a disk array. Creating a disk
array allows you to increase reliability and fault tolerance. Creating a disk array is described in the
Diskmenu on page 48 and in the Arraymenu on page 50. A description of the individual types
of RAID arrays is provided in the appendix RAID Arrays on page 105.
Archiving of recordings.
Recordings from the recorder can be archived on external media. The recorder provides AVI and
Private formats for archiving. To ensure the safety of recordings, it is recommended to use the Private
format. For more information on archiving recordings, see the appendix Archiving of recordings
on page 111.
Mobile application.
The recorder allows access to recordings remotely, using a smartphone with a mobile application. For
the description of the application, see the appendix Mobile application on page 117.
Detection, recognition and comparison of license plates.
The configuration of the recorder for the comparison of license plates also requires several stages of
preparation. To properly configure this option should be:
Enable and configure license plate detection ( LPRmenu on page 33)
Configure response options for license plate detection ( "Recognition" submenu on page 34)
Configure license plate database ( License plate database management menu on page 83)
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
4
6000 series IP recorders - Users manual - version 2.1
1. Startmenu ............................................................................................................. 7
2. Settingsmenu ......................................................................................................... 7
2.1. Cameramenu ................................................................................................ 8
2.1.1. “Manage Camerasettings group ................................................................. 8
2.1.2. “Add Camerasettings group ....................................................................... 9
2.1.3. “Imagesettings group ............................................................................... 11
2.1.4. “Motion Settingssettings group ............................................................... 12
2.1.5. “PTZsettings group .................................................................................. 13
2.2. Recordmenu ................................................................................................ 18
2.2.1. “Recordsettings group ............................................................................. 18
2.2.2. “Encode Parameterssettings group .......................................................... 22
2.2.3. “Record statussettings group ................................................................... 23
2.3. AI / Eventmenu .......................................................................................... 24
2.3.1. “Event Notificationsettings group ........................................................... 24
2.3.2. “AI Eventsettings group .......................................................................... 27
2.3.2.1."Face recognition" menu................................................................... 28
2.3.2.2."License plate recognition" menu ..................................................... 33
2.3.2.3. „People/Vehicle Perimeter Detectionmenu .................................. 37
2.3.2.4."More" menu ..................................................................................... 39
2.3.3. “General Eventsettings group .................................................................. 44
2.3.4. “Alarm Statussettings group .................................................................... 47
2.4. Diskmenu .................................................................................................... 48
2.4.1. “Disk Managementsettings group ........................................................... 48
2.4.2. “Storage Modesettings group .................................................................. 51
2.4.3. “Disksettings group ................................................................................. 52
2.5. Networkmenu ............................................................................................. 52
2.5.1. “Networksettings group ........................................................................... 52
2.5.2. Stream Settings settings group ................................................................ 56
2.5.3. “Network Statussettings group ................................................................ 56
2.6. Account and Authoritymenu ..................................................................... 57
2.6.1. “Accountsettings group ........................................................................... 57
2.6.2. “Securitysettings group ........................................................................... 61
2.6.3. “User Statussettings group ...................................................................... 62
2.7. Systemmenu ............................................................................................... 62
2.7.1. “Basicsettings group ................................................................................ 62
2.7.2. “Maintenancesettings group .................................................................... 65
2.7.3. “Informationsettings group ...................................................................... 66
3. Search and Backupmenu .................................................................................... 67
3.1. “By Time-sliced Imagesettings group ........................................................ 67
3.2. “By Timesettings group .............................................................................. 70
3.3. “By Eventsettings group ............................................................................. 71
3.4. “Tag Managementsettings group ................................................................ 73
3.5. “Image Managementsettings group ............................................................ 73
3.6. “Backup Statussettings group ..................................................................... 74
TABLE OF CONTENTS
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
5
6000 series IP recorders - Users manual - version 2.1
4. Playbackmenu ..................................................................................................... 75
5. Intelligent Analyticsmenu .................................................................................. 80
5.1. “Sample Databasesettings group .................................................................... 80
Face database management ............................................................................... 80
License plate database management .................................................................. 83
5.2. “Searchsettings group ..................................................................................... 84
5.3. “Statisticssettings group ................................................................................. 93
5.4. „Face Attendancesettings group ..................................................................... 94
5.5. „Face Check Insettings group ........................................................................ 95
6. Recorder operation using the browser .................................................................. 96
6.1. Minimal PC configuration for browser connections ......................................... 96
6.2. Network connection via browser ...................................................................... 96
6.3. Live display panel ............................................................................................. 97
6.4. “Playbackmenu ............................................................................................. 102
6.5. “Search and Backupmenu ............................................................................. 103
6.6. “Intelligent Analysismenu ............................................................................ 104
6.7. “Function Panelmenu ................................................................................... 104
7. Supplement - RAID disk arrays ........................................................................... 105
7.1. General information ........................................................................................ 105
7.2. RAID levels ..................................................................................................... 105
7.2.1. RAID 0 ..................................................................................................... 105
7.2.2. RAID 1 ..................................................................................................... 106
7.2.3. RAID 5 ..................................................................................................... 106
7.2.4. RAID 6 ..................................................................................................... 107
7.2.5. RAID 10 (1+0) ......................................................................................... 107
7.2.6. „Hot Sparedisk. ...................................................................................... 108
7.3. RAID configuration in 6000 series IP recorders ............................................. 108
7.31. Configuration ............................................................................................ 108
7.3.2. Rebuilding the disk array ......................................................................... 109
7.3.3. Estimated recovery time for the RAID array ........................................... 110
7.3.4. Procedure with the RAID array in case of damage of the recorder ......... 111
8. Supplement - Archiving of recordings .................................................................. 111
8.1. Archiving of recordings on a USB drive ........................................................ 111
8.2. Moving and playing back the archive on a PC ............................................... 112
8.3. Player options .................................................................................................. 115
9. Supplement - mobile application ........................................................................... 117
9.1. Installation and initial configuration ............................................................... 117
9.2. Adding the device to the application .............................................................. 118
9.3. Basic operation ................................................................................................ 119
9.3.1. Landscape mode ....................................................................................... 119
9.3.2. Portrait mode ............................................................................................ 119
9.3.2.1. Application configuration menu ....................................................... 120
9.3.2.2. Remote playback menu .................................................................... 121
9.3.2.3. Additional menu options .................................................................. 122
TABLE OF CONTENTS
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
6
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
7
1. “Startmenu
The start menu gives access to all recorder functions. The menu is displayed after pressing the button in
the lower left corner of the screen. Menu options are available to the logged in user.
2. “Settingsmenu
This menu allows to modify all main recorder settings.
RECORDER'S MENU - START MENU
- logs in/logs out the user into the recorder menu
- button to display the start menu
- displays the recorder shutdown window. Available options : Logout,
Reboot, Shutdown
- displays the settings menu. Description of the menu in the
chapter 2. “Settingsmenu
- displays the playback menu. Description of the menu in the chapter 4.
Playbackmenu
- displays the search and archive wizard. Description of the
menu in the chapter 3. Search and Backupmenu
- displays the image analysis menu. Description of the menu in
the chapter 5. Intelligent Analyticsmenu
- displays the name of the currently logged user
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
2.1. “Cameramenu
The Cameramenu allows to search, add to the recorder and edit the parameters of IP cameras. This
menu also allows to configure the parameters of motion detection, image analysis and programming
cruise and presets for PTZ cameras.
2.1.1. “Manage Camerasettings group
This menu contains options for adding, editing, configuring and removing cameras.
Edit Cameramenu
This menu displays a list of added cameras along with basic information, such as: camera name, IP
address, port, connection status, protocol, model, firmware version (depending on the model). It is
also possible to edit connection parameters (“Edit button ). For cameras added by Quickly
Addwith the status Onlineit is only possible to edit the camera name, for cameras added manually
or with the status Offlineit is possible to edit all connection parameters. This menu also allows to
update the firmware on 3000 and 6000 series cameras. To remove the camera from the list, use the
delete button.
Edit Camera Groupmenu
This menu allows to create and manage camera groups. Cameras are grouped to create mini-
sequences (cameras collected in the group are displayed sequentially in the selected channel window).
To create a group, press the Add groupbutton. Then in the add window, you define the group name,
sequence time and add cameras to the group.
The mini-sequence is started using the context menu in the live display(menu is displayed on the
right side of the live view window). In this menu, click on the Single Channel Sequences bar to
display available groups. Then select in the live view window the channel, on which we want to run
the mini-sequence and double-click the name of the selected group. The mini-sequence is turned off
by right-clicking on the mini-sequence channel and selecting the Close Dwelloption.
IP Planningmenu
This menu allows to manage cameras and recorders in the local network. Individual and group change
of network parameters of cameras, and adding cameras to the recorder is possible. In the case of
recorders, it is possible to add/remove cameras, change the IP address, change the administrator login
data and enable the buzzer in the device location.
RECORDER'S MENU -CAMERA - MANAGE CAMERA
The mini-sequence can be run on any channel window, even empty.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
2.1.2. “Add Camerasettings group
This menu allows to add cameras and channels of other recorders to the recorder. It is also possible to
edit camera network parameters. The add window also displays information from the recorder
network card about the available bandwidth.
Quickly Addmenu
After selecting this menu, the recorder automatically searches and displays available cameras.
The camera is added by selecting it in the list and click Addbutton. It is possible to select multiple
cameras and add them a few at a time, and modification of network parameters cameras.
The Default password button allows to set default login details for various protocols used by the
recorder to connect to cameras, which significantly speeds up and simplifies the process of adding
cameras, especially with a larger number of them.
RECORDER'S MENU -CAMERA - ADD CAMERA
In recorders equipped with PoE ports, configuration should be started by connecting cameras to
PoE ports. The NOVUS 3000 and 6000 series cameras will be automatically detected and added.
Cameras of other series require, before connecting, setting the IP address compatible with the
addressing range, set for the internal Ethernet port of the recorder (default 10.151.151.1). Then
enter the username and password for the camera.
Please note that adding a camera not connected to PoE ports (located on the network) takes a
logical channel for connecting the camera to the PoE port. If the camera is blocking the channel
for the camera in the PoE port, remove it from the configuration and add it after detecting the
camera connected to the PoE port.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
Add Manuallymenu
This menu allows you to manually create a camera in the system by providing its IP address, data port,
login data and communication protocol.
Add Recordermenu
This menu allows to add channels of another recorder working in the same network.
Adding a recorder is done by selecting it on the list and clicking the Addbutton. The next window
will be displayed, presenting the list of channels of the selected recorder. After selecting the desired
cameras, click OK. The window will close and the added channels will be shown in the editing
window.
The Manual addbutton allows you to manually add a recorder by entering its IP address, data port,
login data and communication protocol.
RECORDER'S MENU -CAMERA - ADD CAMERA
Only NOVUS 3000 or 6000 series recorders can be added.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
11
2.1.3. Imagesettings group
This menu allows to modify settings and adjust images in added cameras.
OSD Settingsmenu
This menu allows to set the channel name. It is also possible to enable / disable the channel name
display, as well as change the format and enable / disable the date and time display. To change the
position of the OSD on the image, click and hold the left mouse button on the red border, move the
OSD to the desired location.
In this menu it is also possible to add a watermark (in text form), which will be displayed during
playback of recordings from a given channel only, if the recording will not be modified in any way.
To save the settings, press the Applybutton.
Image Settingsmenu
In this menu, we can set image parameters such as brightness, contrast, saturation, hue and other,
depending on the camera. Use the Defaultbutton to set default image values.
Mask Settingsmenu
This menu allows to set privacy zones. To set the zone, press the Drawbutton and holding the left
mouse button pressed, select the appropriate area on the image. Then enable the mask by selecting
Onfrom the Maskdrop-down list. To save the settings, press the Applybutton.
Fisheye Settingsmenu
This menu contains image settings for fisheye cameras. You can select the display mode and specify
the camera installation location.
RECORDER'S MENU -CAMERA - IMAGE
The range of available settings and adjustments may vary depending on the camera type /
model / manufacturer.
It is possible to set up to four privacy zones (masks).
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
12
2.1.4. Motion Settingssettings group
This menu allows you to configure the motion detection function.
Configuring motion detection starts by selecting a camera from the list. Then set the zone: select the
appropriate area on the image, holding the left mouse button pressed. The Allbutton can be used to
select the entire image, and the Clear button can be used to remove the entire selection. The
Reversebutton replaces selected and unselected areas. Then, using the Sensitivityslider, set the
detection sensitivity level, and select the duration of the alarm from the Durationlist. After making
these settings, enable motion detection by selecting Onfrom the Motionlist and save the settings
with the Applybutton.
After configuring motion detection, press the Processing Modebutton to go to the Alarm Handling
Settingswindow for setting the response to the motion detection event (“Motionmenu on page 44).
In the window it is possible to set the motion detection schedule, the rules for recording the detection
event, as well as to set the response to the occurrence of motion detection:
Snapshot - performing saving snapshot
Audio - starts playing the audio file
Push - enables sending push messages to the user's mobile device
Alarm-out - activation of alarm outputs in camera or recorder
Preset - selects the preset for PTZ cameras
Buzzer - enabling the sound signaller
Pop-up Video - displays the image in a window appearing on the screen
E-mail - sends an email notification
RECORDER'S MENU -CAMERA - MOTION SETTINGS
For cameras other than Novus 3000 or 6000 series, motion detection or some of its options may
not be available.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
13
2.1.5. “PTZsettings group
This menu allows to configure PTZ options for high speed dome cameras and cameras with
motorzoom lens.
Presetmenu
The menu allows to set presets on PTZ cameras.
Adding presets
Adding presets starts by selecting a camera from the Cameralist. Using the arrow buttons and the
Zoom”, Focus and Iris buttons set the desired field of observation, and then press the Add
button or the arrow button next to the selected camera (a preset window will appear in which we
press the button ).
In the newly opened preset window, select the preset number from the Presetlist that you want to
save (you can also give it your own name) and save with OK”.
In the same way you can add more presets.
RECORDER'S MENU -CAMERA - PTZ
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
14
Editing presets
The recorder allows to edit created presets (i.e. save a new position on an existing preset). To edit the
preset, select the camera and preset to edit from the list. Next, use the arrow buttons and Zoom”,
Focusand Iristo set a new observation field and press the Save position button. You can also
change the preset name. After changing the new name, save the button
Deleting presets
To delete a preset, select the camera and preset to be removed and press the Delete button. An
operation confirmation window will appear in which we press OK”. Deleting presets is also possible
by pressing the button next to the preset name in the preset list.
Cruisemenu
The menu allows to program routes in PTZ cameras.
Adding routes
Adding a route starts by selecting a camera from the list. Then press the arrow button next to the
selected camera, and when the preset window appears, press the button to add a new route.
The route adding window will be displayed:
RECORDER'S MENU -CAMERA - PTZ
Before programming the route, you must store at least two presets on your camera.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
15
The Add presetbutton is used to add additional presets to the created route. When adding a preset, its
parameters are defined, i.e. the time camera stays on the given preset and movement speed (these
parameters can also be changed later, by pressing the button in the Editcolumn).
Editing a route
The recorder allows you to edit created routes. To edit the route, select the camera from the list.
Editable route options will be displayed under the preview window.
If more than one route is added to the camera, the Cruiselist is used to select the route to be edited -
the table below will display the list of presets included in it with their current parameters.
In the Cruise nameposition, we can change route name. Pressing the edit button next on the preset,
allows to change its parameters, and the delete button removes the preset from the route.
After selecting any preset in the list, you can change the order with the arrow buttons.
RECORDER'S MENU -CAMERA - PTZ
This action deletes the preset as part of the route, but does not delete it from the list of presets
saved in the camera.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
16
Deleting a route
To delete a route, select the camera and then press the button to open the route list window. After
hovering over the name of the route to delete, the delete button will be displayed.
After pressing the button and confirming with OK in the confirmation window, the route will be
deleted.
Cruise Groupmenu
The menu allows you to create groups of routes which are then run in a preset order. One cruise group
can be created for each PTZ camera, consisting of up to eight routes. The group is started with the
"Play" button, and stopped with the "Stop" button. The table below the preview window, shows the
routes that make up the group. The delete button removes the selected route from the group.
Tracemenu
This menu allows you to save (record) your own trace (path), which the camera will then faithfully
repeat. This option differs from the "Cruisemenu in that no presets are needed to create a track: when
creating a path, the camera saves the commands given to it.
Adding path
Adding a path starts by selecting a camera from the list. Then press the arrow button next to the
selected camera, and when path window appears, press the button to add a new path. You can
also add the path using the "Add" button. A window will open, in which the default name of the new
path will be displayed. The name can be freely changed.
Next, press the "Start Record" button to start recording the path. By using the PTZ control buttons
move the camera in the required manner. After finishing the recording, press the button "Stop Record ".
The path will be saved.
Playing a path
To play a path, select its number from the "Trace" list and press the "Run trace" button. We stop
playing with the Stop Tracebutton.
Deleting a path
To delete a path, select the camera and then press the button to open the paths list window. After
hovering over the name of the path to delete, the delete button will be displayed.
After pressing the button and confirming with OK in the confirmation window, the path will be
deleted.
The path can also be deleted with the "Delete" button, after selecting its number from the list of paths.
RECORDER'S MENU -CAMERA - PTZ
Before setting the cruise group, you must store at least two routes on your camera.
The maximum recording time for a path is 180 seconds.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
17
Taskmenu
This menu allows you to schedule PTZ operation. For each PTZ camera, you can create a set of tasks
and assign a time slot to each of them.
Adding a task to the schedule
Adding a task begins with selecting a camera from the "Camera" list. Then, from the "Function" list,
select the PTZ function that the camera will perform. We can choose a preset, route, path and
additionally random scanning or boundary scanning. Finally, in the "Start Time" and "End Time"
fields, define the time limits for the function operation and add to the schedule with the "Add" button.
After adding all tasks, go to the schedule window:
The added tasks are inactive, so enable the schedule. The schedule is turned on by pressing the
"Enable" button displayed after pressing the arrow in the "Enable" column. From now on, the
camera waits for the start time of the first set task.
Pressing the edit button in the "Operation" column allows you to modify the selected task. A new
window will open where you can change the start and end times and the PTZ function.
Deleting the schedule
The recorder does not allow you to delete individual tasks, it is only possible to delete the entire
schedule. To delete the schedule, press the arrow in the "Operation" column and then press the
"Delete All" button.
RECORDER'S MENU -CAMERA - PTZ
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
18
2.2. “Recordmenu
The Recordmenu allows to configure recording modes, recording parameters and schedules.
2.2.1. “Recordsettings group
This menu allows to configure the recording modes, pre-alarm and post-alarm recording options.
Mode settingsmenu
This menu allows to configure the recording modes.
RECORDER'S MENU -RECORD
One schedule of up to eight tasks can be created for each PTZ camera.
If the times of the created tasks will overlap, i.e. the start time of the next task will be earlier
than the end time of the previous one, the camera will execute the previous task until the set end
time and then move to the next one. If you set two tasks with the same start and end times, the
camera will execute the first task.
Manual PTZ control is possible while the camera is executing schedule tasks. However, when
the operator completes control, the camera will resume its tasks.
The range of tasks that can be set may differ depending on the camera type / model /
manufacturer.
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
19
"Mode" drop-down list - "Auto" option
Selecting the Autooption in the Modelist allows to use one of the predefined recording
options, visible in the menu. There is a motion detection icon next to the selected option. Clicking on
the icon enables motion detection for each camera working in accordance with the settings of a given
mode.
After clicking on the selected option, a window will open with a list of cameras that work in
accordance with the settings of this mode (by default, these are all cameras added to the recorder).
Two configuration options are displayed above the camera list: "Schedule Record - allows user to
configure the parameters of the main stream of cameras for continuous recording, and the option
Motion Record+Sensor Record+AI Record- allows user to configure the main stream for recording
of alarm events (this option may have a different name, depending on the type of alarm events selected
for recording). When the alarm event recording mode is selected, without the continuous mode, the
"Schedule Recordis not displayed.
After completing the configuration, click OKto save the changes.
Clicking the Advancedbutton opens the Add Record Modewindow, in which you can create your
own predefined recording option.
"Mode" drop-down list - "Customization" option
Selecting "Customization" in the "Mode" list hides the predefined recording options and opens the
"Schedule Config" window, where the user can apply his own, separate recording schedule to each
camera and each type of alarm event. Schedules can be created and edited after pressing the "Schedule
Management" button.
A description of the settings of Schedule Configmenu is provided on the next page.
The Manual Recording Settingsoption allows to set the duration of the manual recording in the range
from 1 minute to 5 hours, or - after selecting the Manualoption - until switched off by the user.
RECORDER'S MENU -RECORD - MODE SETTINGS
6000 series IP recorders - Users manual - version 2.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
20
Schedule Configmenu
The menu allows to apply predefined or user-created schedules to each camera individually.
Edit Schedulesmenu
This menu allows to edit and delete predefined schedules, as well as create and edit your own
schedules.
RECORDER'S MENU -RECORD - SCHEDULE CONFIG
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252

Novus NVR-6308P8-H1-II Instrukcja obsługi

Typ
Instrukcja obsługi

w innych językach