Powder coat color options:
Blaze Light Box 0606 - Wall
- 6'W x 6'H
- 4” light boxes feature a sleek, aluminum frame
- Available in white, black or silver
- Perimeter LED light bars are pre-attached to the frame
- Light bars feature an internal power supply, which means no separate power supplies within the frame
- Easy to assemble, comes with hanging hardware
- UL Certified & ADA compliant sizing, approved for public spaces
- 5 year LED warranty on lights; long life span - 43,800 hours for 5 years if powered 24/7
- Lifetime warranty on frame
Assembled unit:
72”w x 72”h x 4”d
1828.8mm(w) x 1828.8mm(h) x 101.6mm(d)
Approximate Weight:
70 lbs / 31.7515 kg
features and benefits:
dimensions:
Hardware Shipping
Graphics
additional information:
We are continually improving and modifying our product range and reserve the right to vary the specifi cations
without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for
variance. E&OE. See Graphic Templates for graphic bleed specifications
6/1/2023
https://www.theexhibitorshandbook.com/
downloads/download-graphic-templates
or
Graphic material: Backlit Textile (dye-sublimated
fabric) or Intensity (UV printed)
See graphic templates for graphic sizes.
Refer to related graphic templates for more
information Visit:
click here
Blaze Wall Mounted Light Box 0606 is 6’w by 6’h and features a
durable 4” aluminum frame in your choice of Silver, White or Black.
Perimeter, interior LED light bars are pre-attached to the frame and
make the box GLOW. The light bars feature an internal power supply,
which means no separate power supplies within the frame,
minimizing shadowing and cord management.
Two backlit graphic material options are available to choose from,
Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed).
Backlit Textile is a tightly woven fabric that is slightly stretchy, foldable
and washable; it is best for multiple uses. Intensity is a material that
has a smooth, coated finish. The double-strike process creates vibrant
backlit graphics.
Simply assemble the frame, hang, install the graphic and plug in!
Packing case(s):
2 Boxes
Shipping dimensions:
1 x BOX (74"L x 9"H x 11"D)
1879.6mm(l) x 228.6mm(h) x 279.4mm(d)
1 x BOX (18"L x 12"H x 4"D)
457.2mm(l) x 304.8mm(h) x 101.6mm(d)
Approximate shipping weight:
82 lbs / 37.1946 kg
Tools Required
MULTI HEX KEY
(Included)
PHILLIPS SCREW DRIVER
(Not Included)
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead
into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed
in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a
drop cloth, washing hands before set-up or
by wearing gloves.
Removal: Use the pull tab located on the
graphic and gently pull the graphic from the
frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot
clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing
machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
SEG GRAPHIC APPLICATION
Fold graphic over
FCE-2 and push
into each corner of the frame (1-4).
Fabric is outside of the FCE-2.
Press into the middle of the
outside channel (5-8) and
continue around perimeter.
To remove graphic, use the pull
tab and gently pull graphic from
frame.
FEED POWER CABLE THRU
GROMMET HOLE
Connect LED lights
End to End
LED Lights
NOTE: A maximum of 20 LED fixtures can be connected in a line.
Connect LED lights
End to End
SETUP INSTRUCTIONS
Q
T
Y
I
M
A
G
E
DESCRIPTION
1
8FT POWER CORD FOR LED-EV LIGHTS
4
CB10 90 DEGREE CONNECTOR
1
GROMMET HOLE 171MM FROM LEFT END
EXTRUSION-WITH MITRE CUT BOTH ENDS-WITH
1829MM (72.01in) LENGTH OF 347
3
EXTRUSION-WITH MITRE CUT BOTH ENDS
1829MM (72.01in) LENGTH OF 347
1
LOCKS BOTH ENDS
1797MM LENGTH OF PH EXTRUSION-WITH CAM
2
4-SCREWS, 4-ANCHORS)
BLAZE LIGHTBOX WALL BRACKETS (2-BRACKETS,
16
10" LED AC LIGHT BAR 6000 K
1
bottom right corner
silicone beading around perimeter & pull tab in
71.88 h finish size, Opaque Liner, sewn with FCE-2
LINER (A1) (75.88 w X 75.88 h total size ) 71.88 w X
ASSEMBLE FRAME
1
2
3
4
5
6
WALL BRACKET
STEPS
1. Mount top brackets to wall studs.
2. Assemble frame on floor and add liner to back.
3. Hang frame on top brackets.
4. Mount bottom wall brackets to wall and secure frame.
SETUP INSTRUCTIONS
Q
T
Y
I
M
A
G
E
DESCRIPTION
1
corner
around perimeter & pull tab in bottom right
Intensity, single sided, sewn with silicone beading
w X 71.88 h finish size, UV/LED print on Backlit
GRAPHIC (A1) (75.88 w X 75.88 h total size ) 71.88
ADD GRAPHICS
THEN PRESS ALONG THE
PERIMETER EDGE
PRESS CORNERS IN
-
1
-
2
-
3
-
4
-
5
-
6
w innych językach
- English: Blaze 0606 User guide
Powiązane artykuły
Inne dokumenty
-
Classic Exhibits ECO-1102 Setup Instructions
-
-
-
-
-
-
-
-
-