PNI House IPMAX Instrukcja obsługi

PNI HOUSE IPMAX POE 3LR

POE video surveillance system / POE система за видеонаблюдение / POE-

Videoüberwachungssystem / Sistema de videovigilancia POE / Système

de vidéosurveillance POE / POE videó meggyelő rendszer / Sistema di

videosorveglianza POE / POE videobewakingssysteem / System nadzoru

wideo POE / Kit supraveghere video POE

EN User manual ......................................................... 3

BG Ръководство за употреба ............................. 28

DE Benutzerhandbuch .............................................. 54

ES Manual de usuario ............................................... 80

FR Manuel utilisateur ............................................... 105

HU Használati utasítás .............................................. 130

IT Manuale utente .................................................. 155

NL Handleiding ........................................................ 180

PL Instrukcja obsługi ............................................... 205

RO Manual de utilizare ............................................. 230

3User manual

English

Main functions

• Simultaneous real-time multi-channel recording, remote playback and

conﬁguration

• Supports up to 9 channels with a maximum 4K (8MP) resolution.

• Backup on USB ﬂash memory and external HDD.

• Supports face and human shape detection (depending on the camera)

• Possibility to connect external speaker.

Technical speciﬁcations

NVR

Video inputs 4 x RJ45 POE

Video output 1 x VGA / 1 x HDMI

Audio output 1 x 3.5mm

Number of channels 9 x max. 4K (8MP)

Playback resolution Max. 2K (2560 x 1440) on HDMI output

Max. 1080P (1920 x x1080) on VGA output

Ethernet 1 x RJ45 100/100Mbps

Video compression H.265AI/H.265+

Audio compression G.711A

Recording mode Manual, alarm, motion detection, programmed

USB 2 x USB2.0

HDD 1 x HDD SATA (max. 8Tb)

ONVIF Yes

Power voltage 48V / 2A

Dimensions 255 x 220 x 43 mm mm

Working temperature -26°C ~ +80°C

Camera

Resolution 3MP (2304 x 1296)

Lens 3.6mm

LED 4 IR LEDs and ﬂoodlight

Power supply POE

User manual 4

English

Dimensions 70 x 190 x 65 mm

Working temperature -26°C ~ +80°C

Instructions for use

Installing the storage unit

Before ﬁrst use, please install the storage unit. Only one SATA HDD with a

maximum capacity of 14TB can be installed inside the recording unit (HDD is

not included in the package).

• Loosen the screws and open the NVR housing

• Connect the data cables and secure the hard drive with the screws

• Close back the NVR housing

• Connect the power and internet cable to the NVR

Turn on the device

Plug the power cord into a 230V outlet. The NVR will start. The indicator LED

will light up.

If the start time is within the preset schedule for recording, then the recording

function will start automatically.

Notes:

1. Check that the input voltage corresponds to the recommended voltage of the

device. The supply voltage is 230V ± 10% / 50 Hz 2A.

2. We suggest using a UPS device to protect the device from voltage ﬂuctuations.

Turn o the device

There are two ways to turn o the device.

1. Access the main menu (right click on the screen) and select the option

Logout - Shutdown

2. Turn o the power supply.

Special warnings:

1. Restart after power failure. If the device is closed abnormally, it creates a

5User manual

English

backup and restarts from that status after power is restored.

2. Replace the battery on the system board. Before replacing the battery, you

must backup your system settings (see chapter Advanced-Import / Export)

and turn o the power supply. The device time and date must be set again after

the battery is replaced. We recommend that you replace the battery every

year.

Remote control of the device

The NVR can be controlled locally or remotely from both smartphones and

computers with Windows operating system.

Operating system Application Download

Android, iOS XMEye

Android iOS

Windows General CMS

The installation ﬁle can

be downloaded from

the CD included in the

package or from the

Download section on the

product web page (www.

pni.ro)

System authentication

After turning on the device, log in to the system.

By default, the admin user is password protected by 1234. If the password is

entered incorrectly 5 times in a row, the account will be blocked. By restarting

the device or after half an hour, the account will be unlocked automatically.

Note: For the security of your system, please change the password after the ﬁrst

login.

User manual 6

English

Quick setup guide

After starting the device, the quick setup guide will start.

Note: We recommend conﬁguring the system before installing the NVR and

cameras in the ﬁnal location.

Stept to follow:

1. Set the time, date and time zone.

2. Soon, a popup window will appear on the screen asking you to change the

authentication password in the system. Follow the steps on the screen or

press the ESC key on the NVR to exit the password setting interface.

Note: For the security of your system, we recommend changing the password after

the ﬁrst login in the system.

3. Set the network parameters manually or activate the DHCP option for

automatic download.

4. Scan the QR code on the screen to install the XMEye application on your

mobile phone. Scan the QR code with the serial number to add the system

to the application.

5. Set the display options and resolution of the monitor connected to the

NVR. Maximum supported resolution 2560x1440 (2K).

Note: Before changing the resolution, make sure that your monitor supports that

resolution. If the set resolution is higher than the resolution of your monitor, nothing

will appear on the monitor and you will not be able to access the menu. If this

happens, however, connect the NVR to a lower resolution monitor, access the menu,

and change the resolution.

6. Press the OK key to complete the basic system conﬁguration.

7. Right click on the screen and access the NetDetect option. Click Diagnose

to test the network conﬁguration.

Note: For the settings to take eect, restart the system. Right click on the screen

- Logout - Reboot.

7User manual

English

The menu

In the main preview interface, right-

click with the mouse to access the

menu.

Main Menu

Options: Playback, Record Conf, Network, Date Time.

User manual 8

English

Playback

The system oers numerous ﬁlters and options for identifying the desired

record. You can search by channel number, date and time interval or by ﬁle

type.

Record Conf.

The interface allows you to make the following settings: the length of a recording

ﬁle, the recording mode (programmed or manual), the period (day and time

interval) and the recording type (normal, motion detection and alarm).

9User manual

English

Network

Manually set the network parameters (IP address, gateway, DNS, port, etc.)

or check the DHCP option for automatic parameter retrieval.

Note: For the settings to take eect, restart the system. Right click on the screen

- Logout - Reboot.

Date time

Set the time zone, date, time and format.

User manual 10

English

System

Options: General, Encode, Backup, Snapshot Conﬁg., Display, Account.

General

The interface will allow the following settings: the menu display language, the

behavior in case of a full hard disk (overwrite or stop recording), the session

duration and enable / disable quick conﬁguration guide at system startup.

11 User manual

English

Encode

Displays the technical parameters of the connected cameras (resolution,

frame rate, video compression, quality, etc.).

Backup

The USB memory or external HDD must be installed in the NVR before

starting the backup. Press the Detect button to identify the storage device,

then the Backup button to perform the backup.

User manual 12

English

Snapshot Conﬁg

Set to take cyclic captures at a certain time and send them by email, FTP or

store them on your hard disk.

Display

In the local preview mode can be displayed: time, channel name, recording

status, alarm status, transparency and display resolution.

Note: Before changing the resolution, make sure that your monitor supports that

resolution. If the set resolution is higher than the resolution of your monitor, nothing

will appear on the monitor and you will not be able to access the menu. If this

happens, however, connect the NVR to a lower resolution monitor, access the menu,

and change the resolution.

13 User manual

English

Account

The interface allows managing users who have access to the system, adding

users, changing user rights, changing the password, creating user groups and

setting an account security level by registering answers to certain predeﬁned

questions. In case of password reset, the veriﬁcation code can be sent in the

mobile application or at the set email address. To increase security, you can set

a pattern for accessing the system.

User manual 14

English

Alarm

Options: Intelligent Alert, Abnormality and Traditional alarm (No image, No

video signal, etc.). Alarm input and Intelligent options are not available for this

model.

Intelligent Alert

Set the system behavior in case of motion detection: registration and / or

notiﬁcation in the application. Also set the level of sensitivity to movement

and the area of action.

15 User manual

English

Abnormality

Set the system behavior in case of: storage device error, lack of space on the

storage device, lack of internet connection or IP conﬂict. In such situations you

can set to send a notiﬁcation in the application or an email.

Traditional alarm

Set the system behavior in case of missing image or missing video signal. In

such situations you can set to send a notiﬁcation in the application or an email,

start recording, make captures or save the alarm recording on an FTP server.

User manual 16

English

Advanced

Options: HDD info, Upgrade, AutoMaintain, Restore, Import / Export,

Digital, LOG, BPS and Version.

HDD info

Set how the hard drive works (read-only or read-write).

Note: In order to save recordings to the hard disk, it must be set to read / write

mode.

17 User manual

English

Upgrade

Insert a USB stick into the NVR that should contain the update ﬁle in the

root folder. Select the storage drive and ﬁle from the NVR menu and click the

Upgrade button.

AutoMaintain

Set the system to restart on a certain day and time or set the automatic

deletion of ﬁles older than a certain period.

Restore

Select the options you want to reset.

User manual 18

English

Import/Export

Export or import system settings.

19 User manual

English

Digital

Options: Digital channels, Channel status and Channel Type.

Digital channels

Add a camera on a speciﬁc channel. Click the Add button, then Search to ﬁnd

all the cameras connected in the same network (same router) with the NVR.

User manual 20

English

Channel status

Displays the status (connected, unconnected or unconﬁgured) for all 9

channels.

Channel type

Displays the maximum number of cameras and the resolution of the cameras

that can be connected to the system. The PNI IPMAX POE 3 NVR supports

a maximum of 9 IP cameras with a maximum resolution of 4K (8MP).

Strona się ładuje...

PNI House IPMAX Instrukcja obsługi

PNI House IPMAX Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty