PNI International WIFI660 Instrukcja obsługi

  • Zapoznałem się z instrukcją obsługi Rejestrator NVR WIFI660. Dokument szczegółowo opisuje proces instalacji, konfiguracji, nagrywania i zdalnego odtwarzania materiału wideo z kamer. Jestem gotowy, aby odpowiedzieć na pytania dotyczące funkcji urządzenia, połączenia z kamerami IP, ustawień alarmów, parametrów sieciowych, a także opcji backupu.
  • Czy mogę podłączyć głośnik zewnętrzny?
    Jaki dysk twardy jest obsługiwany?
    Ile kamer IP można podłączyć?
    Czy jest możliwość zapisu na pendrive?
PNI HOUSE WIFI660
NVR
EN User manual ......................................................... 3
BG Ръководство за употреба ............................. 30
DE Benutzerhandbuch .............................................. 59
ES Manual de usuario ............................................... 87
FR Manuel utilisateur ............................................... 114
HU Használati utasítás .............................................. 141
IT Manuale utente .................................................. 168
NL Handleiding ........................................................ 195
PL Instrukcja obsługi ............................................... 222
RO Manual de utilizare ............................................. 250
3User manual
English
Main functions
Real-time simultaneous multi-channel recording, remote playback and
configuration
Simultaneous HDMI and VGA video output
Supports up to one 6TB SATA HDD (HDD not included)
Supports 8 x 3MP IP surveillance cameras or 4 x 5MP IP cameras.
Backup on USB flash drive or external hard drive.
Supports face detection (depending on the camera)
Possibility to connect external speaker.
Technical specifications
NVR
Video output 1 x HDMI (max. 1080P)
1 x VGA (max. 1080P)
Audio output 1 x 3.5mm
Network 1 x RJ45 10/100Mbps
USB port 2 x USB2.0
Storage 1 x HDD SATA max. 6TB
Video compression H.265AI/H.265+ dual stream
Audio compression G.711A
Power supply 12V 2A
Working temperature -26°C ~ +80°C
CAMERA
Sensor 1/2.7”Q03 CMOS
Resolution 2304 x 1296@12fps
IR LEDs 4
Minimum lighting 0.1Lux@F1.2 B/W 0.01Lux@F1.2
IR distance up to 30 m
Lens 4 mm
Network 1 x RJ45 10/100Mbps
Power supply 12V 1A
Waterproof IP66
User manual 4
English
Working temperature -26°C ~ +80°C
WiFi frequency 2.4GHz
Transmission power 100mW
Instructions for use
Installing the storage unit
Before first use, please install the storage unit. Only one SATA HDD with a
maximum capacity of 6TB can be installed in the recording unit housing (the
HDD is not included in the package).
Loosen the screws and remove the NVR cover
Connect the data cables and secure the hard drive to the screws
Put the NVR cover back on its position
Connect the power and internet cable to the NVR
Turning the NVR on
Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up.
If the start time is within the preset program for recording, then the recording
function will start automatically
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage fluctuations.
Turning the NVR o
There are two ways to turn o the device.
1. Access the main menu (right click on the screen) and select the option
Logout - Shutdown
2. Turn o the power supply.
5User manual
English
Special warnings:
1. Restart after the voltage drops. If the device is closed abnormally, it creates
a backup and restarts from that status after power is restored.
2. Replace the battery on the system board. Before replacing the battery, you
must save the system settings and turn o the power supply. The device time
must be rescheduled after the battery is replaced. We recommend that you
replace the battery every year
Remote control of the device
The NVR can be controlled locally or remotely from both smartphones and
computers with Windows operating system.
Operating system App Download
Android, iOS XMEye
Android iOS
Windows General CMS
The installation file can
be downloaded from
the CD included in the
package or from the
Download section on the
product web page (www.
pni.ro)
System authentication
After turning on the device, log in to the system.
By default, the admin user is protected by password 1234. If the password is
entered incorrectly 5 times in a row, the account will be blocked. By restarting
the device or after half an hour, the account will be unlocked automatically.
Note: For the security of your system, please change the password after the first
login.
User manual 6
English
Quick setup guide
After starting the device, the quick setup guide will start.
Note: We recommend configuring the system before installing the NVR and
surveillance cameras in the final location.
Steps to follow:
1. Set the time, date and time zone.
2. In a short time, a popup will appear on the screen asking you to change the
login password in the system. Follow the steps on the screen.
Note: For the security of your system, we recommend changing the password after
the first login in the system.
3. Set the network parameters manually or activate the DHCP option for
automatic download.
4. Scan the QR code on the screen to install the XMEye application on your
mobile phone. Scan the QR code with the serial number to add the system
to the application.
5. Check the status of IP surveillance cameras (Online or Oine)
6. Set the display options and resolution of the monitor connected to the
NVR. Maximum supported resolution 1920x1080px.
Note: Before changing the resolution, make sure that your monitor supports that
resolution. If the set resolution is higher than the resolution of your monitor, nothing
will appear on the monitor and you will not be able to access the menu. If this
happens, however, connect the NVR to a higher resolution monitor, access the
menu, and change the resolution.
7. Press the OK key to complete the basic system configuration.
8. Right click on the screen and access the NetDetect option. Click Diagnose
to test the network configuration.
Note: For the settings to take eect, restart the system. Right click on the screen
- Logout - Reboot.
7User manual
English
Add additional surveillance camera in the system
1. Right click on the home screen and choose the Wireless menu.
2. The list of surveillance cameras already added to the system will be
displayed.
3. To add a new camera, click Code for Wireless.
4. Power up the new camera.
5. The system will scan the surveillance cameras in the area and will display
the newly found surveillance camera on channel 9. You can wait for the
search phase to finish or you can click Exit if your surveillance camera has
already been located.
6. To finish adding the surveillance camera to the system, double click on the
newly found camera.
User manual 8
English
The menu
In the main preview interface, right-
click with the mouse to access the
menu.
Main Menu
Options: Wireless, Playback, Record Conf, Network, Date Time
Wireless
Displays the status (Oine, Online) of IP surveillance cameras in the system.
9User manual
English
Playback
The system oers numerous filters and options for identifying the desired
record. You can search by channel number, date and time interval or by file
type.
Record Conf.
The interface allows you to make the following settings: the duration of a
recording file, the recording mode (programmed or manual), the period (day
and time interval) and the recording type (normal recording, motion detection
User manual 10
English
and alarm)
Network
Manually set network parameters (IP address, gateway, DNS, port, etc.) or
check the DHCP option for automatic parameter retrieval.
Note: For the settings to take eect, restart the system. Right click on the screen
- Logout - Reboot.
11 User manual
English
Date time
Set the time zone, date, time and format.
System
Options: General, Backup, Snapshot Config., Display, Account.
User manual 12
English
General
The interface allows you the following settings: setting the menu display
language, behavior in case of a full hard disk (overwrite or stop recording),
session duration and enable / disable quick configuration guide at system
startup.
Backup
The USB memory or external HDD must be installed in the NVR before
starting the backup. Press the Detect button to identify the storage device,
then the Backup button to perform the backup.
13 User manual
English
Snapshot Config
Set to take cyclic captures at a certain time and send them via email, FTP or
hard disk storage.
Display
In the local preview mode can be displayed: time, channel name, recording
status, alarm status, transparency and display resolution.
Note: Before changing the resolution, make sure that your monitor supports that
resolution. If the set resolution is higher than the resolution of your monitor, nothing
will appear on the monitor and you will not be able to access the menu. If this
happens, however, connect the NVR to a lower resolution monitor, access the menu,
and change the resolution.
User manual 14
English
Account
The interface allows managing users who have access to the system, adding
users, changing user rights, changing the password, creating user groups and
setting an account security level by registering answers to certain predefined
questions. In case of password reset, the verification code can be sent in the
mobile application or at the set email address. To increase security, you can set
a pattern for accessing the system.
15 User manual
English
Alarm
Options: Intelligent Alert, Abnormality and Traditional alarm (No image, No
video signal, etc.). Alarm input and Intelligent options are not available for this
model.
Intelligent Alert
Set the system behavior in case of motion detection: registration and / or
notification in the application. Also set the level of sensitivity to movement
and the area of action.
User manual 16
English
Abnormality
Set the system behavior in case of: storage device error, lack of space on the
storage device, lack of internet connection or IP conflict. In such situations you
can set the sending of a notification in the application or an email.
Traditional alarm
Set the system behavior in case of missing image or missing video signal. In such
situations, you can set to send an in-app notification or email, start recording,
capture, or save the alarm recording to an FTP server.
17 User manual
English
Advanced
Options: HDD info, Upgrade, AutoMaintain, Restore, Import / Export,
Digital, LOG, BPS and Version.
HDD info
Set how your hard drive works (read-only or read-write).
Note: In order to save recordings to the hard disk, it must be set to read / write
User manual 18
English
mode..
Upgrade
Insert a USB stick into the NVR that should contain the update file in the root
folder. Select the storage drive and file from the NVR menu and then click the
button Upgrade.
AutoMaintain
Set the system to restart on a certain day and time or set the automatic
19 User manual
English
deletion of files older than a certain period.
Restore
Select the options you want to reset.
Import/Export
Export or import system settings.
User manual 20
English
Digital
Options: Digital channels, Channel status and Channel Type.
Digital channels
Add a surveillance camera on a specific channel. Click the Add button, then
Search to find all the surveillance cameras connected in the same network
(same router) as the NVR.
1/280