AMP Lighting AAL-1021-B-BZ Instrukcja instalacji

Marka: AMP Lighting

Model: AAL-1021-B-BZ

Typ: Instrukcja instalacji

Niniejsza instrukcja jest również odpowiednia dla

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP

Low Voltage Landscape Lighting

AMP

G2 ControlPro Series

AAL-102X-4-B-BZ

AMP

G2 ControlPro Series

AAL-102X-4-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture

B. (1) Stake

Install Stake

3.25”

1.75”

3.5”

2.5”

3”

1.75”

ControlPro

Board

Stake

Soil

Ground

Determine the desired location for

mounting the xture. Hammer the stake

into the ground until ange of stake is ush

to grade. To avoid damage to the stake,

place a board on top of the stake while

hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut in the

ground using a at shovel.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP

G2 ControlPro Series

AAL-102X-4-B-BZ

Install Fixture to Stake

Wire Connection

Fixture

Stake

Pigtail

Clear away an area in the

ground at the wireway slot

on top of the stake. Lay the

luminaire pigtail into the

wireway slot and screw the

xture on to the stake. Tighten

until snug.

Wireway Slot

Strip both the leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main supply

cable leads.

Pigtail

Main Supply Cable

Wire Connectors

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP

G2 ControlPro Series

AAL-102X-4-B-BZ

Remove Glare Guard

Install/Replace Optic

Loosen the set screw and

remove the glare guard from

the xture.

Glare

Guard

Set Screw

Fixture

Remove Fixture Lens

Loosen the xture lens and remove

it from the xture.

Fixture Lens

Fixture

Remove Fixture Lens

Optic

Screw

Fixture

Loosen the screws and remove the optic

from the xture.

Install the new optic in the xture and

reverse Step 3 - Step 1. Make sure that

you have the optic properly aligned over

the LED board before tightening down.

Improper alignment when tightening

the screws can cause the optic to break.

LED Board

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP

G2 ControlPro Series

AAL-102X-4-B-BZ

–6––6–

[email protected] • 813.978.3900

–7–

IS-AAL-102X-4-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP Lighting AAL-1021-B-BZ Instrukcja instalacji

Marka: AMP Lighting

Model: AAL-1021-B-BZ

Typ: Instrukcja instalacji

Niniejsza instrukcja jest również odpowiednia dla

Pobierz PDF

raport

w innych językach

English: AMP Lighting AAL-1021-B-BZ Installation guide

Powiązane artykuły

Inne dokumenty

AMP ForesterPro AAL-1015-40-B-BZ Installation & Maintenance Manual