kiddy EVOLUTION PRO 2 Instrukcja obsługi

Kategoria
Siedzenie samochodowe
Typ
Instrukcja obsługi
Infant Carrier
INSTRUCTION MANUAL
EN / DE / ES / FR / IT / PT / PL / NL Booklet 1
F
E
B
C
D
G
H
I
K
O
A
P
J
L
M
N
> 6 M
3
1
1
1
2
2
2
1
1
2
4
5
1
2
3
1
2
6
7
1
1
2
8
10
CLICK
9
11 12
14
13
CLICK
1
2
15 16
19
2
1
3
20
A
B
17 18
21
B
A
22
1
CLICK
1
CLICK
23
B
A
A
24
4
1
2
3
5
Please read these instructions carefully
before using this infant carrier for the rst time.
Keep this manual for future reference.
ENEN
Table of contents
1. Description of components 5
2. Introduction 6
3. Suitability 6
4. General safety instructions 7
5. General use / Adjustments 10
5.1 Functions of the carry handle /
Adjusting the reclined position 10
5.2 Using the newborn inlay 11
5.3 Using the sunshade 11
6. Buckling / Unbuckling of the baby 11
6.1 Loosening the belt system 11
6.2 Adjusting the height of the belt system 11
6.3 Buckling / Unbuckling of the baby 12
7. Use in the vehicle 13
7.1 In-vehicle installation with seat belt 13
7.1.1 Seat selection 13
7.1.2 Installation steps with the seat belt 13
7.2 Installation with the Isofix platform 14
7.2.1 Seat selection 14
7.2.2 Installation steps on the Isofix platform 15
7.2.3 Removal from the Isofix platform 15
8. Use on a stroller 16
9. Use as a rocker 16
10. Remove / Replacing the covers 17
10.1 Removing the sunshade 17
10.2 Removing the backrest cover 18
10.3 Removing the seat cover 18
10.4 Replacing covers 18
EN
11. Care and maintenance 18
11.1 Cleaning the seat covers 18
11.2 Cleaning plastic parts 18
11.3 Cleaning the belt system 18
12. Steps to take after an accident 19
13. Warranty 19
5
EN
Operation manual Evolution Pro 2
IMPORTANT – Read the instructions carefully before use and keep
for future reference in the storage compartment at the foot end of
the carrier. So you always have it at hand whenever you need it.
1. Description of components
A e child restraint system Evolution Pro 2
B Carry handle
C Release button stroller
D Shoulder belt
E – Seat cover
F – Central adjuster
G – Buckle
H Infant carrier release handle
I Locking bar
J – Sunshade
K Newborn inlay
L – Latch
M Carry handle button
N Lap belt guide
O – Front cover
P Height adjustment handle
EN
6
2. Introduction
We are pleased that you have chosen the Evolution Pro 2 to be your
child restraint system.
e Evolution Pro 2 forms part of the Pro product line of our com
-
pany, which provides extensive safety for the protection of your
baby and growing child by making use of special energy-absorb
-
ing materials. e forces generated during a collision are absorbed
particularly well before they reach the delicate body parts of your
baby. To gain the most comprehensive protection for your child, the
Evolution Pro 2 must be used exactly as described in this manual!
e Evolution Pro 2 also stands out due to its adjustable reclined
position, which oers your child an almost at reclined position when
using the infant carrier on your stroller or as a rocker.
3. Suitability
e Evolution Pro 2 infant carrier has been tested and approved in ac-
cordance with the latest version of the Safety Standard ECE-R44/04.
It was granted the design approval for the “universal” and “semi-uni
-
versal” (in connection with the Isox platform) class of products.
is means:
“Universal”: e Evolution Pro 2 can be used in all vehicles with seats
with 3-point belt compliant with ECE-R16 or comparable standards.
“Semi-universal”: In connection with the Isox platform (accessory),
the Evolution Pro 2 may be used in all vehicles that are listed in the
vehicle type list. Check the latest version of the type list at:
www.kiddy.de/typelist_isoxbase.
7
EN
It is important to take note that you may never use the
Evolution Pro 2 on a car seat with an active front airbag!
A front airbag that hits the infant carrier with force can
cause serious injury or even death to the child!
For use in your vehicle, please also follow the manufactur-
er’s recommendations in your owner’s manual.
4. General safety instructions
WARNING
1. Please read the instructions for use carefully be-
fore using the car seat for the rst time. Incorrect
use can endanger the life of your child.
2. Many injuries are caused by mere thoughtless-
ness and can easily be avoided.
3. Never use the Evolution Pro 2 in the reclined po-
sition in a vehicle. e reclined position is intended
for use outside the vehicle only.
4. It is not permitted to make any modications
to the child restraint system. Doing so nullies or
impairs its eectiveness in protection. If diculties
arise, please consult your retailer or the manufac-
turer.
EN
8
5. Regularly inspect the dierent elements of the in-
fant carrier. e belt system and buckle in particular
must be checked regularly for wear and tear or pos-
sible damage.
6. Do not attempt to make adjustments while trav-
elling!
7. Always install the Evolution Pro 2 facing the direc-
tion opposite to the one in which you are travelling
(the child’s back facing the direction you are travel-
ling in).
8. Please adhere to the instructions in the owner’s
manual of the vehicle into which the Evolution Pro 2
is installed.
9. Make sure that all movable parts of the
Evolution Pro 2 are always properly locked in place
and that no parts are lodged between movable
seats or doors.
10. e infant carrier should only be used for the
age group 0+ (up to a maximum of 13 kg or approx.
15 months).
11. In vans and mini-vans it is particularly important
to ensure that the Evolution Pro 2 is installed in an
9
EN
easily accessible seat in the event that third-party
rescue is required.
12. Never use the Evolution Pro 2 as a shopping
bag or as a means for transporting something.
13. Never leave your baby unsupervised, especially
not when the Evolution Pro 2 is placed on a high
surface (nappy changing station, table etc.).
14. Always secure the baby with the belt system
(even when you are not using the Evolution Pro 2
inside the vehicle)!
15. Do not place any heavy items on the rear win-
dow shelf, these can become dangerous projectiles
in the event of an accident.
16. Always fasten the Evolution Pro 2 seat with the
vehicle seat belt or on the Isox platform when
transporting it in your car unoccupied.
17. Never use the Evolution Pro 2 seat without its
original cover, it forms part of the safety concept!
18. Shield the Evolution Pro 2 seat from direct sun-
light to prevent uncomfortable heating of the sur-
face.
EN
10
19. Schedule breaks during longer trips and take
your baby out of the Evolution Pro 2 seat to relieve
the pressure on its spinal column.
20. Only fasten the Evolution Pro 2 seat with the
vehicle’s own 3-point belt through the marked belt
guides or on the Isox platform available as an
accessory.
21. Do not use the Evolution Pro 2 any more if parts
have been damaged or after an accident (at an im-
pact speed greater than 10 km/h)! (See point 15.)
5. General use / Adjustments
5.1 Functions of the carry handle / Adjusting the reclined position
To adjust the carry handle, press both carry handle buttons (g. 1,
no. 1) and then swivel the carry handle (g. 1, no. 2) into the required
position.
WARNING
Make sure that both carry handle buttons are
locked in place again (they protrude)!
e carry handle of the Evolution Pro 2 can be used in two positions
(g. 2):
g. 2, no. 1: Carry position / installation position in vehicle with
3-point belt or on Isox platform.
g. 2, no. 2: Reclined position for use on stroller or as rocker.
11
EN
Never use the Evolution Pro 2 in the reclined position in a vehicle. e
reclined position is intended for use outside the vehicle only.
5.2 Using the newborn inlay
e Evolution Pro 2 is equipped with a comfort inlay for newborns.
is inlay ensures a more level position of your baby in the infant car
-
rier. is comfort inlay may only be used for babies up to the age of
6 months (g. 3). To remove the inlay, open the buckle and remove
the inlay from the shoulder belts.
Premature babies: A special inlay for premature babies, which oers
a signicantly better seating and reclined position, is available as an
accessory.
5.3 Using the sunshade
To extend the sunshade pull the hood towards the foot end of the
car seat. To retract the sunshade, push towards the head end of the
car seat.
6. Buckling / Unbuckling of the baby
6.1 Loosening the belt system
Turn the carry handle in to the carry position. Before you can adjust
the height of the shoulder belts, the belt system must be loosened.
For this purpose, keep the central adjuster pressed in the front un
-
der the seating area (g. 4, no. 1), and pull the shoulder belts (g. 4,
no. 2) out.
6.2 Adjusting the height of the belt system
Open the front cover at the head end of the infant carrier by slightly
pressing the hooks upward (g. 5, no. 1), now the cover opens (g. 5,
no. 2). Now turn the height adjuster handle 90° clockwise (g. 6, no. 1)
and pull the handle outward (g. 6, no. 2), then move it into the desired
EN
12
position upward or downward (g. 6, no. 3). e shoulder belts have
to be adjusted so that they are at the baby’s shoulder height (g. 7).
Lock the handles back into place after you have nished. Please make
sure that the belt system is not twisted or does not become lodged!
Close the front cover.
6.3 Buckling / Unbuckling of the baby
Always buckle up your child when it is in the infant carrier! Loosen the
shoulder belts as described in point 6.1 and place them over the side
of the rim of the carrier.
Place your baby in the infant carrier and then position the shoul
-
der belts over its shoulders (g. 8, no. 1). Place the safety belt lock
tongues attached to the shoulder belts over each other (g. 8, no. 2).
Now push the safety belt lock tongues into the buckle. It is locked in
place when a click sound is heard (g. 9). Make certain that it is se
-
curely locked in place! Now pull the central belt until the belt system
ts the body of the child snugly (g. 10)!
Make sure that the space between the belts and your child is no more
than the width of a nger (approx. 1 cm) and that the belt system is
not twisted.
Loosen the shoulder belts as described in point 6.1 and press the red
button on the buckle to unbuckle your baby. Now you can take the
child out of the seat.
13
EN
7. Use in the vehicle
7.1 In-vehicle installation with seat belt
7.1.1 Seat selection
Read up all the necessary information about the use of
child restraint systems in your vehicle owner’s manual.
e Evolution Pro 2 child restraint system can be installed on any seat
of vehicles equipped with a 3-point belt system (g. 11).
If you want to install the child restraint system in the pas-
senger seat, the airbag must be deactivated or you will
have to use a dierent seat.
7.1.2 Installation steps with the seat belt
WARNING
1. Place the Evolution Pro 2 facing the rear and with
the handle in the carry position on a seat without an
active front airbag and with a 3-point belt (g. 12).
2. Before starting the journey, please always make
sure that the harness is put on and tightened cor-
rectly.
Pull the vehicle seat belt out and feed the lap belt through both lap
belt guides and press the safety belt lock tongue into the buckle
(g. 13) with a clearly audible click. Check that everything is locked
into place. Tighten the lap belt (g. 13). Now place the shoulder belt
around the infant carrier and feed it through behind the front cover
EN
14
of the infant carrier (g. 14). Make certain that the belt clip is in the
correct position. Now tighten the belt system (g. 15). Make sure that
the belt is not twisted (g. 15)!
e infant carrier is in the optimum position when the rear line at the
shell is at a 90° angle (vertical) to the horizontal line (g. 15).
Some vehicles are tted with so-called retractor locks.
With this, the automatic recoiling of the belt can be blocked,
which makes a more solid installation of the Evolution Pro 2
possible. Read your vehicles’ owner manual for more infor
-
mation on this feature or ask your authorised workshop.
7.2 Installation with the Isox platform
7.2.1 Seat selection
Read up all the necessary information about the use of
child restraint systems in your vehicle owner’s manual.
With the Isox platform, the child restraint system Evolution Pro 2
can be installed in any seat in a vehicle that is tted with Isox an-
chors.
However, you must refer to the included vehicle type list with regard
to seat selection in your vehicle. e latest version of the vehicle type
list is always available for download at:
www.kiddy.de/typelist_isoxbase.
Rear-facing child restraint systems may never be used
with an activated front airbag!
Traces of use or discolouration can appear on some vehicle seat cov
-
ers made from sensitive materials (e.g. velour, leather etc.) if car seats
or platforms are used. To avoid this we recommend to place a seat
cover shield or protection mat underneath the product.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158

kiddy EVOLUTION PRO 2 Instrukcja obsługi

Kategoria
Siedzenie samochodowe
Typ
Instrukcja obsługi