Panasonic nv-gs300 Instrukcja obsługi

Operating Instructions

Instrukcja obsługi

Návod k použití

Kezelési utasítás

For PC Connection

Before use, please read these instructions completely.

Przed pierwszym włączeniem kamery prosimy o dokładne przeczytanie instrukcji obsługi.

Před použitím si, prosíme, přečtěte celý návod.

Használat előtt kérjük, hogy teljesen olvassa el ezt a kezelési utasítást.

VQT0T18

VQT0T18EP-ENG.book 1 ページ２００５年１１月２８日　月曜日　午後９時０分

2

VQT0T18

Before opening the CD-ROM package, please read the following.

End User License Agreement (for USB Driver, SweetMovieLife and

MotionDV STUDIO)

You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement

(“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does

not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita

Electric Industrial Co., Ltd. (“Matsushita”), its distributors or dealers from which you made the purchase.

Article 1 License

Licensee is granted the right to use the software, including the information recorded or described on the

CD-ROM, instruction manuals, and any other media provided to Licensee (collectively “Software”), but all

applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred to

Licensee.

Article 2 Use by a Third Party

Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use,

copy or modify the Software, except as expressly provided for in this Agreement.

Article 3 Restrictions on Copying the Software

Licensee may make a single copy of the Software in whole or a part solely for back-up purpose.

Article 4 Computer

Licensee may use the Software only on one computer, and may not use it on more than one computer.

Article 5 Reverse Engineering, Decompiling or Disassembly

Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of

them is permitted under law or regulation of the country where Licensee resides. Matsushita, or its

distributors will not be responsible for any defects in the Software or damage to Licensee caused by

Licensee’s reverse engineering, decompiling, or disassembly of the Software.

Article 6 Indemnification

The Software is provided “AS-IS” without warranty of any kind, either expressed or implied, including, but

not limited to, warranties of non-infringement, merchantability and/or fitness for a particular purpose.

Further, Matsushita does not warrant that the operation of the Software will be uninterrupted or error free.

Matsushita or any of its distributors will not be liable for any damage suffered by Licensee arising from or in

connection with Licensee’s use of the Software.

Article 7 Export Control

Licensee agrees not to export or re-export to any country the Software in any form without the appropriate

export licenses under regulations of the country where Licensee resides, if necessary.

Article 8 Termination of License

The right granted to Licensee hereunder will be automatically terminated if Licensee contravenes of any of

the terms and conditions of this Agreement. In the event, Licensee must destroy the Software and related

documentation together with all the copies thereof at Licensee’s own expense.

NV-GS27: not supplied

VQT0T18EP-ENG.book 2 ページ２００５年１１月２８日　月曜日　午後９時０分

3

VQT0T18

Before Use

Introduction .............................................................4

Notes on these instructions.....................................4

Names and functions of packaged items ................4

Check before use ....................................................5

Operating environment............................................6

Install/Connection

(except for NV-GS27)

Installing USB Driver...............................................8

Installing SweetMovieLife 1.0E ...............................9

Installing MotionDV STUDIO 5.6E LE...................10

Connecting the movie camera to

personal computer..............................................11

Software

Using SweetMovieLife 1.0E/

MotionDV STUDIO 5.6E LE

(Windows XP SP2, Windows 2000 SP4)

(except for NV-GS27) .........................................12

Using the movie camera as a Web Camera

(Windows XP SP1/SP2, Windows 2000 SP4)

(NV-GS27: Windows XP SP2 only) ....................14

Others

Copying files to a personal computer

- Card reader function (Mass storage)

(NV-GS37/27: not available) ...............................15

To disconnect USB cable safely

(except for NV-GS37/27) ....................................16

If you no longer need software or driver

(Uninstall) (except for NV-GS27) ........................16

Using on Macintosh...............................................17

Notes.....................................................................18

ª WARNING:

To reduce the risk of fire or shock hazard, do not

expose this equipment to rain or moisture.

ª CAUTION:

To reduce the risk of fire or shock hazard and

annoying interference, use the recommended

accessories only.

ENGLISH

VQT0T18EP-ENG.book 3 ページ２００５年１１月２８日　月曜日　午後９時０分

4

VQT0T18

Before Use

Introduction

You can connect your personal computer to a

movie camera. You can transfer images

recorded with your movie camera to your

personal computer.

By controlling the movie camera from the personal

computer, the desired images from tape or camera

can be acquired into the personal computer.

Notes on these instructions

≥Microsoft

®

and Windows

®

are either registered

trademarks or trademarks of Microsoft Corporation

in the United States and/or other countries.

≥Intel

®

and Pentium

®

are either registered

trademarks or trademarks of Intel Corporation in

the United States and/or other countries.

≥Apple, Mac OS, iMovie/iMovie HD, FireWire are

either registered trademarks or trademarks of

Apple Computer, Inc. in the United States and/or

other countries.

≥All other names, company names, product names,

etc. in these instructions are the trademarks or

registered trademarks of their respective

corporations.

≥Microsoft product screen shot(s) reprinted with

permission from Microsoft Corporation.

≥The names of the products you are using may

differ from the names given in the text. Depending

on the operating environment and other factors,

the contents of the screens used in these

instructions may not necessarily match what you

will see on your screen.

≥Although the screens in these operating

instructions are shown in English for the sake of

example, other languages are supported as well.

≥In this manual, the Panasonic make digital video

camera with USB terminal is referred to as movie

camera.

≥These instructions do not cover the basic

operations of the personal computer or define any

terms. For this information, refer to the operating

instructions which accompany your personal

computer.

Names and functions of

packaged items

1) USB connection cable (NV-GS27: not

supplied):

≥This cable is used to connect a personal

computer with your movie camera.

2) CD-ROM (NV-GS27: not supplied):

SweetMovieLife 1.0E (l 9)

MotionDV STUDIO 5.6E LE (l 10)

USB Driver (l 8)

Acrobat Reader

DirectX

≥If the movie camera is connected to your

personal computer, you can send video from

the movie camera to the other parties via the

network. (Windows XP SP1/SP2, Windows

2000 SP4)

≥To activate SweetMovieLife/MotionDV

STUDIO, Microsoft DirectX 9.0b/9.0c should

be installed. If it is not installed in your

personal computer, you can install it from the

supplied CD-ROM. Click [DirectX] on the CD

launcher and then follow the instruction

message on the screen to install it. (During

installation of USB Driver, SweetMovieLife or

MotionDV STUDIO, you can also install

DirectX 9.0b.)

≥Using the SweetMovieLife software allows you

to easily import video on a tape to a personal

computer and then auto edit the imported

video. For advanced importing and editing,

use MotionDV STUDIO.

≥Using the MotionDV STUDIO software allows

you to capture the video recorded on a tape or

images viewed through the lens of a camera.

≥You can only output the video from the

personal computer to the movie camera when

connecting the movie camera to the personal

computer with the DV cable (NV-GS500/300

only).

VQT0T18EP-ENG.book 4 ページ２００５年１１月２８日　月曜日　午後９時０分

5

VQT0T18

Check before use

The software available and the drivers required vary depending on the OS of the personal computer.

Check the software used and the drivers required using the table below and then install them from the

CD-ROM (NV-GS27: not supplied).

°1 If DirectX 9.0b/9.0c is not installed in the

personal computer you use, the installation of

[DirectX] is required.

°2 The personal computer you use should comply

with USB 2.0 (High-Speed).

°3 Available only on Windows XP SP2

°4 Available only on Windows XP SP1/SP2

°5 Available only on Windows 2000 SP4

°6 Not required for Windows XP SP2

°7 Available only on MSN Messenger

°8 Available only on Mac OS X v10.3 to 10.4

≥If using other brands of video editing software, please consult with your retailer for compatibility.

Purpose of use Software used

Installation of drivers

Windows

XP

Windows

2000

Windows

Me

Mac OS

Copying files in the

card onto the

personal computer

≥PC connection mode

No software

(The movie camera is

used as a removable

disc.)

Not

required

Not

required

Not

required

Not

required

Capturing pictures on

the tape to the

personal computer

≥Tape recording mode

≥Tape playback mode

SweetMovieLife/

MotionDV STUDIO

(Connect with the DV

cable (optional).)

iMovie 4/iMovie HD

(Connect with the

FireWire (DV) cable (not

supplied).)

Not

required

°1, 3

Not

required

°1, 5

Not

available

Not

required

°8

SweetMovieLife/

MotionDV STUDIO

(Connect with the USB

connection cable

(supplied).)

Not

required

°1, 2, 3

USB Driver

°1, 2, 5

Not

available

Not

available

Recording pictures

on the personal

computer to the tape

≥Tape playback mode

SweetMovieLife/

MotionDV STUDIO

(Connect with the DV

cable (optional).)

iMovie 4/iMovie HD

(Connect with the

FireWire (DV) cable (not

supplied).)

Not

required

°1, 3

Not

required

°1, 5

Not

available

Not

required

°8

SweetMovieLife/

MotionDV STUDIO

(Connect with the USB

connection cable

(supplied).)

Not

available

Not

available

Not

available

Not

available

Using the movie

camera as a Web

Camera

≥Tape recording mode

≥Tape playback mode

Windows Messenger/

MSN Messenger

USB Driver

°1, 4, 6

USB Driver

°5, 7

Not

available

Not

available

VQT0T18EP-ENG.book 5 ページ２００５年１１月２８日　月曜日　午後９時０分

6

VQT0T18

Operating environment

≥Despite having the operating environment

indicated, it may not be possible to use the

program with some types of personal computer.

≥A CD-ROM drive is required to install this program.

SweetMovieLife 1.0E/

MotionDV STUDIO 5.6E LE for DV

(NV-GS27: not supplied)

OS:

IBM PC/AT compatible personal computer with

pre-installed;

Microsoft Windows XP Home Edition/Professional

SP2

Microsoft Windows 2000 Professional SP4

CPU:

Intel Pentium III 800 MHz or higher (including

compatible CPU)

Graphic display:

High Colour (16 bit) or more (32 bit recommended)

Desktop resolution of 1024k768 pixels or more

(Supporting the overlay of DirectDraw)

Sound:

PCM sound source(compatible DirectSound)

RAM:

256 MB or more (Adding more memories enables

you to operate the personal computer more

comfortably.)

Hard disk:

Ultra DMA – 33 or more

Free hard disk space:

640 MB or more

(When you capture video, 1 GB is needed for the

data of approx. 4 minutes.)

Interface:

DV (IEEE1394) terminal (IEEE1394.a)

USB 2.0 – A type (compatible Hi-Speed mode)

Other requirements:

Mouse

Software:

DirectX 9.0b/9.0c

Windows Media Player 6.4 to 10

≥When 2 or more USB devices are connected to a

personal computer, or when devices are

connected through USB hubs or by using

extension cables, proper operation is not

guaranteed.

≥When connected to the keyboard USB terminal,

normal function may not be possible.

≥This instruction manual describes only the

procedures for installation, connection and

start-up. Please read the PDF-based instructions

for how to use the SweetMovieLife/MotionDV

STUDIO.

≥To view the installed operating instructions, Adobe

Acrobat Reader 5.0 or later is required. Please

install Adobe Acrobat Reader from the supplied

CD-ROM.

≥Before using for the first time, select [Readme

First] from [start] >> [All Programs (Programs)] >>

[Panasonic] >> [SweetMovieLife 1.0E]/[MotionDV

STUDIO 5.6E LE for DV], and read any

supplementary details or updates.

VQT0T18EP-ENG.book 6 ページ２００５年１１月２８日　月曜日　午後９時０分

7

VQT0T18

USB Driver

(NV-GS27: not supplied)

OS:

IBM PC/AT compatible personal computer with pre-

installed;

Microsoft Windows XP Home Edition/Professional

SP1/SP2 °

1

Microsoft Windows 2000 Professional SP4

CPU:

Intel Pentium III 450 MHz or higher (including

compatible CPU)

Graphic display:

High Colour (16 bit) or more

Desktop resolution of 800k600 pixels or more

RAM:

128 MB or more (256 MB or more recommended)

Free hard disk space:

250 MB or more

Communication Speed:

56 kbps or faster is recommended

Interface:

USB 1.1 or later – A type

Other requirements (to send/receive audio):

Sound card

Speaker or headphones

Software:

Windows Messenger 5.0/5.1 (Windows XP)

MSN Messenger 7.0/7.5 (Windows XP/2000)

DirectX 9.0b/9.0c

°1 When your OS is Windows XP SP2, the USB

driver is not needed.

To use the movie camera as a Web Camera, the

following conditions must be met.

≥To upgrade Windows XP to SP2, click [start] >>

[All Programs] >> [Windows Update]. (Requires

internet connection.)

≥To upgrade Windows 2000 to SP4, click [start] >>

[Windows Update]. (Requires internet connection.)

≥If the installed version is not latest, update it by

performing the Windows update.

≥Depending on the security setting on PC, proper

communication will not be possible.

≥The other parties also need to use same

Messenger software during the communication.

Card reader function

(NV-GS37/27: not available)

OS:

IBM PC/AT compatible personal computer with pre-

installed;

Microsoft Windows XP

Microsoft Windows 2000

Microsoft Windows Me

CPU:

Intel Pentium II 300 MHz or higher (including

compatible CPU)

RAM:

32 MB or more (64 MB or more recommended)

Interface:

USB 1.1 or later – A type

VQT0T18EP-ENG.book 7 ページ２００５年１１月２８日　月曜日　午後９時０分

8

VQT0T18

Install/Connection

(except for NV-GS27)

Installing USB Driver

Install this when your OS is Windows XP SP1, or Windows 2000

SP4.

(When your OS is Windows XP SP2, installing USB Driver is not

needed.)

USB Driver is needed to be installed when you connect the movie

camera to the PC with the supplied USB cable and use

SweetMovieLife/MotionDV STUDIO or Web Camera.

DirectX 9.0b is installed in your PC if it is not installed beforehand.

Applications which are compatible with older version of DirectX may

not operate properly by installing DirectX 9.0b. In this case, consult

the manufacturers of the applications disabled.

1 Insert the supplied CD-ROM into the personal

computer’s CD-ROM drive.

≥Quit all applications.

≥The [Setup Menu] screen appears.

2 Click [USB Driver].

≥The set up program starts running.

3 You may be required to install DirectX 9.0b

depending on the environment of the personal

computer. In this case, click [Yes] to install it.

≥Reboot the computer after DirectX is installed.

≥Do not take out the CD-ROM.

4 Finish installation by following the on-screen

instructions.

≥Click [Next] and proceed with installation.

≥After completing the installation, click [Finish].

≥Reboot the computer to finish installing USB Driver.

Depending on your personal computer, one of the

following screens may appear.

1 Your personal computer does not support USB 2.0 (High-Speed)

so the video on tape cannot be imported from the video camera

to the personal computer with the USB cable.

≥You can use the WEB Camera function.

2 The personal computer has recognized a USB 2.0 (High-Speed)

driver other than the Microsoft driver. Update the driver to make

sure that it operates properly. (l 11)

3 The USB 2.0 (High-Speed) driver may not be recognized

correctly. Update the driver to make sure that it operates properly.

(l 11)

Cancel

2

3

1

2

3

VQT0T18EP-ENG.book 8 ページ２００５年１１月２８日　月曜日　午後９時０分

9

VQT0T18

Installing SweetMovieLife 1.0E

SweetMovieLife 1.0E is aimed at entry-level users. Using this

software, you can easily import video recorded with a digital video

camera to a personal computer, create a title and add music to the

video and then perform auto edit on it.

For advanced importing and editing, use MotionDV STUDIO.

DirectX 9.0b is installed in your PC if it is not installed beforehand.

Applications which are compatible with older version of DirectX may

not operate properly by installing DirectX 9.0b. In this case, consult

the manufacturers of the applications disabled.

≥When you use Windows 2000 (SP4) to connect the personal

computer and the movie camera by USB cable and then use

SweetMovieLife, installing the USB driver is needed.

1 Insert the supplied CD-ROM into the personal

computer’s CD-ROM drive.

≥Quit all applications.

≥The [Setup Menu] screen appears.

2 Click [SweetMovieLife 1.0E].

≥After reading the displayed contents, please carry out the

installation according to instructions.

3 Select the video system.

4 After the completion of setup, click on [Finish].

≥Sample data is installed concurrently with the SweetMovieLife.

2

4

3

VQT0T18EP-ENG.book 9 ページ２００５年１１月２８日　月曜日　午後９時０分

10

VQT0T18

Installing MotionDV STUDIO 5.6E LE

MotionDV STUDIO allows more advanced editing than

SweetMovieLife. Using this software allows you to capture video

recorded on a tape or images viewed through the lens of a camera.

Connecting the movie camera with the DV cable allows you to output

images edited on a personal computer to a tape in a movie camera

(NV-GS500/300 only). You can also add a wide variety of special

effects such as fade, transition and titles.

DirectX 9.0b is installed in your PC if it is not installed beforehand.

Applications which are compatible with older version of DirectX may

not operate properly by installing DirectX 9.0b. In this case, consult

the manufacturers of the applications disabled.

≥When you use Windows 2000 (SP4) to connect the personal

computer and the movie camera by USB cable and then use

MotionDV STUDIO, installing the USB driver is needed.

1 Insert the supplied CD-ROM into the personal

computer’s CD-ROM drive.

≥Quit all applications.

≥The [Setup Menu] screen appears.

2 Click [MotionDV STUDIO 5.6E LE].

≥After reading the displayed contents, please carry out the

installation according to instructions.

3 Select the video system.

4 After the completion of setup, click on [Finish].

≥Sample data is installed concurrently with the MotionDV

STUDIO.

2

4

3

VQT0T18EP-ENG.book 10 ページ２００５年１１月２８日　月曜日　午後９時０分

11

VQT0T18

Connecting the movie camera to personal

computer

≥When you use a personal computer, use of the AC adaptor is

recommended for the power supply of the movie camera.

ª Confirmation before connection

(for Windows XP/2000)

When you connect the personal computer and the movie camera

with the USB connection cable and then use SweetMovieLife/

MotionDV STUDIO on Windows XP (SP1/SP2) or Windows 2000

(SP4), check the driver of the USB host controller.

≥It is required to use the driver for which [Microsoft] is

displayed on [Driver Provider] in [Driver] tab.

1 Select [start] >> [Settings] >> [Control Panel] to start

[System].

≥[System Properties] is displayed.

2 Click [Hardware] tab and then click [Device Manager].

3 Right-click [Enhanced Host Controller] etc. in [Device

Manager] and then select [Properties].

≥The indication [Enhanced Host Controller] is changed as

[EHCI] depending on the host controller you use.

4 Click [Driver] tab to check the description on [Driver

Provider].

≥If [Microsoft] is displayed on [Driver Provider], the confirmation

procedure is completed.

If a description other than [Microsoft] is displayed

≥Update the driver with the following procedure.

1 Click [Update Driver...].

2 Check [Install from a list or specific location

(Advanced)] and then click [Next].

≥When your OS is Windows 2000, click [Next] after [Update

Device Driver Wizard] appears.

3 (When your OS is Windows XP)

Check [Don’t search. I will choose the driver to

install] and then click [Next].

(When your OS is Windows 2000)

Check [Display a list of the known drivers for this

device so that I can choose a specific driver] and

then click [Next].

4 Click [Standard Universal PCI to USB Host

Controller] and then click [Next].

5 Click [Finish].

≥The update of the driver is completed. Connect the movie

camera.

2

3

1

4

3

4

VQT0T18EP-ENG.book 11 ページ２００５年１１月２８日　月曜日　午後９時０分

12

VQT0T18

Software

Using SweetMovieLife 1.0E/

MotionDV STUDIO 5.6E LE

(Windows XP SP2, Windows 2000 SP4)

(except for NV-GS27)

If you wish to capture data from a tape, set the movie camera to tape

playback mode and insert the tape. If you wish to capture images

from the lens of the movie camera, set the movie camera to the tape

recording mode and remove the tape and the card.

≥If a short-cut icon has been created on the desktop during

installation, it is also possible to start by double-clicking on the

icon.

≥Please read the PDF-based instructions for how to use it.

≥The screen is the MotionDV STUDIO selection screen.

About the PDF operating instructions for

SweetMovieLife/MotionDV STUDIO

For details on how to use the software applications, read the help

file.

1 Set [start] >> [All Programs (Programs)] >>

[Panasonic] >> [SweetMovieLife 1.0E] or [MotionDV

STUDIO 5.6E LE for DV] >> [Manual(PDF format)].

≥Start the software and select [Help] >> [Help] from the menu to

display the help file.

≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF

operating instructions.

1

VQT0T18EP-ENG.book 12 ページ２００５年１１月２８日　月曜日　午後９時０分

13

VQT0T18

With USB connection cable (supplied)

The personal computer should be compatible with USB 2.0

Hi-Speed.

1 Set the movie camera to tape playback mode or tape

recording mode.

≥You cannot use SweetMovieLife in tape recording mode.

2 Set [BASIC] or [ADVANCED] >> [USB FUNCTION] >>

[MOTION DV].

3 Connect the movie camera to personal computer

with auxiliary USB connection cable.

4 Select [start] >> [All Programs (Programs)] >>

[Panasonic] >> [SweetMovieLife 1.0E]/[MotionDV

STUDIO 5.6E LE for DV] >> [SweetMovieLife]/

[MotionDV STUDIO LE for DV].

≥You cannot record the video edited by the PC onto the tape in the

movie camera.

1) USB connection cable

2) USB terminal

With DV cable (optional)

1 Set the movie camera to tape recording mode or tape

playback mode.

≥You cannot use SweetMovieLife in tape recording mode.

2 Connect the movie camera to personal computer

with auxiliary DV cable.

3 Select [start] >> [All Programs (Programs)] >>

[Panasonic] >> [SweetMovieLife 1.0E]/[MotionDV

STUDIO 5.6E LE for DV] >> [SweetMovieLife]/

[MotionDV STUDIO LE for DV].

≥You can record the video edited by the PC onto the tape in the

movie camera. (NV-GS500/300 only)

1) DV cable

2) DV terminal

1)

2)

4

1)

2)

3

VQT0T18EP-ENG.book 13 ページ２００５年１１月２８日　月曜日　午後９時０分

14

VQT0T18

Using the movie camera as a Web Camera

(Windows XP SP1/SP2, Windows 2000 SP4)

(NV-GS27: Windows XP SP2 only)

To upgrade Windows XP to SP2, click [start] >> [All Programs

(Programs)] >> [Windows Update].

If the movie camera is connected to your personal computer, you

can send video and sound from the movie camera to the other

parties via the network. Audio may also be exchanged if the

personal computer is configured accordingly. (You can use the

microphone equipped with the personal computer instead of the one

on the movie camera.)

≥Refer to page 7 for the minimum requirements.

ª Connecting the movie camera to personal

computer (For using as a Web Camera)

1

Install USB Driver. (l 8)

(except for NV-GS27)

2 Set the movie camera to tape playback mode or tape

recording mode.

3 Set [BASIC] or [ADVANCED] >> [USB FUNCTION] >>

[WEBCAM]. (except for NV-GS27)

4 Connect the movie camera to personal computer

with auxiliary USB connection cable.

5 Start the Windows Messenger/MSN Messenger.

≥Click [start] >> [Programs] >> [Windows Messenger]/[MSN

Messenger].

1) USB connection cable (NV-GS27: not supplied)

2) USB terminal

3) The Web Camera mode screen

≥To send pictures recorded on a tape to other personal computer

using the Windows Messenger/MSN Messenger, set [BASIC] >>

[USB FUNCTION] >> [WEBCAM] on tape playback mode before

connecting the movie camera to your personal computer.

(Menu setting cannot be performed in NV-GS27.)

When you use the movie camera as a Web Camera

When you use the movie camera as a Web Camera in the tape

playback mode, the indication of the operation icon is different from

the one in usual operation.

1 In usual operation

2 In the Web Camera mode (Tape playback mode)

≥Even if you move the joystick up/down/right/left ( , ∫, 5,

6), the selected direction on the operation icon is not lit in yellow.

≥The operation icon blinks on instead of appearing from the side of

the screen when you press the centre of the joystick.

2)

3)

1)

12

VQT0T18EP-ENG.book 14 ページ２００５年１１月２８日　月曜日　午後９時０分

15

VQT0T18

Others

Copying files to a personal computer

- Card reader function (Mass storage)

(NV-GS37/27: not available)

If you connect the movie camera to a personal computer with the

USB cable, you can use the movie camera which includes a card as

a external drive of a personal computer and you can copy files

recorded on the card to the personal computer with [Explorer] etc.

ª Copying files recorded on a card to a personal

computer

1

Select the PC connection mode on the movie camera

and then connect the movie camera with the

personal computer.

≥If the movie camera is connected in the PC connection mode,

the [Removable Disk] icon representing the memory card drive

is displayed in [My Computer].

2 Double-click the folder where the desired file is saved

in [Removable Disk].

≥Still pictures (JPEG format) are saved in [100CDPFP] folder.

3 Drag and drop the file onto the destination folder

(hard disk of the personal computer).

ª Note on the folder structure of the card

A card formatted with the movie camera is composed by folders as

described in the illustration below.

[100CDPFP]: The images

(IMGA0001.jpg, etc.) in

this folder are recorded in

the JPEG format.

[MISC]: Files in which DPOF data

has been set to the image

are in this.

≥The other folders in the card are necessary items in the folder

structure. They have nothing to do with actual operations.

ª Viewing files copied from a card

1

Open the folder to which still picture files are copied.

2 Double-click a file you want to view.

≥The software activated to view still picture files varies

depending on the settings of the personal computer you use.

1

3

2

P

C

DCIM

100CDPFP

MISC

256

VQT0T18EP-ENG.book 15 ページ２００５年１１月２８日　月曜日　午後９時０分

16

VQT0T18

To disconnect USB cable safely

(except for NV-GS37/27)

If USB cable is disconnected while computer is on, error dialogue

may appear. In such case click [OK] and close the dialogue box. By

following the steps below you can disconnect the cable safely.

1 Double click the icon in task tray.

≥Hardware disconnect dialogue appears.

2 Select [USB Mass Storage Device] and click [Stop].

3 Verify [Matshita DVC USB Device] is selected and

click [OK].

≥Click [OK], and you can safely disconnect the cable.

Note on the driver name displayed

The driver name displayed will differ depending on your OS,

operating environment and the mode of the movie camera.

≥Windows XP/2000: The name is displayed as [USB Mass

Storage Device] or [Matshita DVC USB

Device] in PC connection mode.

≥Windows Me: The name is displayed as [USB Disk] or

[Matshita DVC] in PC connection mode.

≥Make sure movie camera’s function light is off and disconnect the

cable. Please also read the movie camera’s operating instructions.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If you no longer need software or driver

(Uninstall) (except for NV-GS27)

The screens may vary with the type of the OS. (In this manual,

explanation is offered with Windows XP screen.)

1 Select [start] (>> [Settings]) >> [Control Panel], select

the software or the driver from [Add/Remove

Programs] to uninstall.

≥Uninstalling steps may vary depending on the OS. Please refer to

the user manual of your OS.

1

2

3

1

VQT0T18EP-ENG.book 16 ページ２００５年１１月２８日　月曜日　午後９時０分

17

VQT0T18

Using on Macintosh

ª Operating environment on iMovie 4/iMovie HD

OS:

With pre-installed;

Mac OS X v10.3 to 10.4

CPU:

PowerPC G3 (400 MHz or higher), G4, G5

Interface:

DV (FireWire)

≥Supplied CD-ROM is available for Windows only.

≥iMovie/iMovie HD, included with any new Macintosh or sold with iLife.

≥For more information, please contact Apple Computer, Inc. at

http://www.apple.com.

ª Copying still pictures on PC (except for NV-GS37/27)

OS:

With pre-installed;

Mac OS X v10.3 to 10.4

1 Connect the movie camera to the personal computer via the supplied USB

connection cable.

2 Double-click [NO_NAME] or [Untitled] displayed on the desktop.

≥Files are stored in [100CDPFP] folder in the [DCIM] folder.

3 Using a drag-and-drop operation, move the pictures you want to acquire or the folder

storing those pictures to any different folder on the personal computer.

ª To disconnect USB connection cable safely

Drag [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB connection cable.

VQT0T18EP-ENG.book 17 ページ２００５年１１月２８日　月曜日　午後９時０分

18

VQT0T18

Notes

≥Do not disconnect USB connection cable while the status indicator of the movie camera is on. It may

freeze the software or destroy the data in transfer. Please refer to the operating instructions of movie

camera.

≥When the movie camera is switched to the PC connection mode while it is connected to the personal

computer, the operation mode of the movie camera cannot be switched. In this case, disconnect the USB

connection cable. Switch the operation mode of the movie camera and reconnect the cable. (except for

NV-GS37/27)

≥If the movie camera is used as a Web Camera, the quality of the video to be exchanged will depend on

the Internet connection status.

≥In the Web Camera mode, video (picture) cannot be recorded onto a tape or a card.

≥In the Web Camera mode, the audio may be interrupted in the midway of communication depending on

the communication environment or the performance of the personal computer.

≥If you connect the USB connection cable while you operate a tape in the tape playback mode, the tape will

be stopped.

≥If you connect the USB connection cable in the Web Camera mode (tape recording mode), the time code

indication, the SP/LP indication, or icons disappear.

≥In the Web Camera mode (tape playback mode), the operation icon is changed.

≥If the movie camera is used as a Web Camera while virus checking software is running, the movie

camera’s operation may stop midway through. In this case, exit the Messenger, reconnect the movie

camera and restart the Messenger.

≥We recommend using AC adaptor as the power source for the movie camera when connecting to the

personal computer. Data may be lost if the battery power is lost while transferring.

≥Do not delete the folders in a card. The card may not be recognized if deleted. (except for NV-GS37/27)

≥If you install the USB Driver while the USB connection cable is being connected, or if you don’t follow

these operating instructions, the movie camera will not be recognized correctly. In this case, delete the

driver from [Device Manager] as described below, uninstall the driver, and re-install it. (except for NV-

GS27)

Set the movie camera to tape recording mode, tape playback mode or PC connection mode, connect it to

the personal computer, and delete [DVC] or [Web-Camera] from [Device Manager].

VQT0T18EP-ENG.book 18 ページ２００５年１１月２８日　月曜日　午後９時０分

19

VQT0T18

VQT0T18EP-ENG.book 19 ページ２００５年１１月２８日　月曜日　午後９時０分

20

VQT0T18

Przed otwarciem opakowania z płytą CD-ROM należy zapoznać się z poniższymi informacjami.

Umowa Licencyjna Użytkownika Oprogramowania (dotyczy

sterownika USB, oprogramowania SweetMovieLife/

MotionDV STUDIO)

Użytkownikowi (określanemu dalej jako “Licencjobiorca”) udziela się licencji na Oprogramowanie określone w niniejszej

Umowie Licencyjnej Użytkownika Oprogramowania (określanej dalej jako “Umowa”) pod warunkiem przyjęcia

warunków niniejszej Umowy. Jeśli Licencjobiorca nie wyraża zgody na warunki niniejszej Umowy, powinien niezwłocznie

zwrócić Oprogramowanie firmie Matsushita Electric Industrial Co., Ltd. (określanej dalej jako “Matsushita”) bądź jej

dystrybutorowi lub przedstawicielowi, u którego dokonał zakupu.

Artykuł 1 Licencja

Licencjobiorcy udziela się prawa do korzystania z oprogramowania, w tym informacji zapisanych bądź opisanych

na płycie CD-ROM, instrukcji obsługi oraz wszelkich innych materiałów dostarczonych Licencjobiorcy

(określanych łącznie jako “Oprogramowanie”). Licencjobiorcy nie zostają jednak przyznane jakiekolwiek prawa do

patentów, prawa autorskie, prawa do znaków towarowych ani prawa do tajemnic handlowych związanych z

Oprogramowaniem.

Artykuł 2 Korzystanie przez osoby trzecie

Licencjobiorca nie ma prawa kopiować, modyfikować ani przekazywać Oprogramowania, ani też zezwalać

osobom trzecim na korzystanie z Oprogramowania oraz jego kopiowanie i modyfikowanie, zarówno odpłatnie jak

i bezpłatnie, z wyjątkiem przypadków wyraźnie przewidzianych niniejszą Umową.

Artykuł 3 Ograniczenia dotyczące kopiowania oprogramowania

Licencjobiorca ma prawo wykonać jedną kopię całości lub części Oprogramowania wyłącznie jako kopię zapasową.

Artykuł 4 Komputer

Licencjobiorca ma prawo do korzystania z Oprogramowania wyłącznie na jednym komputerze, a instalowanie go

na innych komputerach jest zabronione.

Artykuł 5 Odtwarzanie kodu źródłowego, dekompilacja i dezasemblowanie

Licencjobiorca nie ma prawa do odtwarzania kodu źródłowego, dekompilacji oraz dezasemblowania

Oprogramowania z wyjątkiem przypadków dozwolonych przepisami prawa obowiązującymi w kraju zamieszkania

Licencjobiorcy. Firma Matsushita oraz jej dystrybutorzy nie będą ponosić odpowiedzialności za jakiekolwiek

usterki Oprogramowania bądź szkody poniesione przez Licencjobiorcę w wyniku odtwarzania przez niego kodu

źródłowego, dekompilacji bądź dezasemblowania Oprogramowania.

Artykuł 6 Zabezpieczenie i ochrona przed roszczeniami

Oprogramowanie jest dostarczane w takim stanie, w jakim się znajduje, bez jakichkolwiek gwarancji wyraźnych

lub domniemanych, a w szczególności gwarancji nienaruszania praw, przydatności handlowej i/lub przydatności

do określonego celu. Ponadto firma Matsushita nie gwarantuje nieprzerwanego bądź bezbłędnego działania

Oprogramowania. Firma Matsushita oraz jej dystrybutorzy nie będą również ponosić odpowiedzialności za

jakiekolwiek szkody poniesione przez Licencjobiorcę w wyniku korzystania z Oprogramowania lub w związku z

korzystaniem z niego.

Artykuł 7 Ograniczenia eksportowe

Licencjobiorca zobowiązuje się nie eksportować ani nie reeksportować Oprogramowania w jakiejkolwiek postaci

do innych krajów, bez stosownego zezwolenia eksportowego wydanego zgodnie z przepisami obowiązującymi w

kraju zamieszkania Licencjobiorcy.

Artykuł 8 Unieważnienie licencji

Prawa udzielone Licencjobiorcy na mocy niniejszej Umowy zostaną automatycznie wycofane w przypadku

naruszenia przez Licencjobiorcę jakichkolwiek postanowień Umowy. W takim przypadku Licencjobiorca ma

obowiązek na własny koszt zniszczyć Oprogramowanie oraz związaną z nim dokumentację, a także wszelkie ich

kopie.

NV-GS27: nie należy do wyposażenia

VQT0T18EP-POL.book 20 ページ２００５年１１月２８日　月曜日　午後９時１分

Strona jest ładowana ...

Panasonic nv-gs300 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Panasonic nv-gs300 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty