Velleman CCTVPROMT1 Quick Installation Manual

CCTVPROMT1

HD CCTV VIDEO SECURITY SYSTEM - 4-CHANNELS - 2 IR CAMERAS - PUSH

VIDEO/STATUS + IVS

HD-BEWAKINGSSYSTEEM - 4 KANALEN - 2 IR-CAMERA'S - PUSH

VIDEO/STATUS + IVS

SYSTÈME DE VIDÉOSURVEILLANCE HD - 4 CANAUX - 2 CAMÉRA'S IR -

PUSH VIDEO/STATUS + IVS

SISTEMA DE VIDEOVIGILANCIA DE ALTA DEFINICIÓN - 4 CANALES - 2

CÁMARAS IR - PUSH VÍDEO/STATUS + IVS

HD VIDEO-ÜBERWACHUNGSSYSTEM - 4 KANÄLE - 2 IR-KAMERAS - PUSH

VIDEO/STATUS + IVS

SYSTEM BEZPIECZEŃSTWA VIDEO WYSOKIEJ ROZDZIELCZOŚCI -

4 KANAŁY - 2 KAMERY IR - FUNKCJA PUSH VIDEO/STATUS + IVS

SISTEM DE VÍDEO-VIGILÂNCIA COM ALTA DEFINIÇÃO - 4 CANAIS - 2

CÂMARAS IR - PUSH VIDEO/STATUS + IVS

QUICK INSTALLATION GUIDE 3

KORTE HANDLEIDING 24

GUIDE D'INSTALLATION RAPIDE 45

GUÍA RÁPIDA 67

SCHNELLEINSTIEG 89

SKRÓCONA INSTRUKCJA INSTALACJI 111

GUIA RÁPIDO PARA INSTALAÇÃO 133

CCTVPROMT1

V. 01 – 25/02/2016 2 ©Velleman nv

2 x

EN

1

12 VDC input terminal

2

Video output connector

NL

1

12VDC-ingangsaansluiting

2

Video-uitgangsaansluiting

FR

1

Connexion d’entrée 12 VCC

2

Connexion de sortie vidéo

ES

1

Conexión de entrada 12 VCC

2

Conexión de salida de vídeo

DE

1

12VDC-Eingangsanschluss

2

Video-Ausgangsanschluss

PL

1

Wejście zasilania 12 VDC

2

Złącze wyjściowe wideo

PT

1

Terminal de entrada 12 VDC

2

Conector de saída de vídeo

EN

Actual product may differ from the shown images due to product enhancement.

NL

Door productverbetering kan het product afwijken van de getoonde afbeeldingen.

FR

Les images peuvent différer du produit réel en raison des améliorations constantes effectuées sur le

produit.

ES

Debido a algunas mejoras, el producto actual puede diferir de las imágenes visualizadas.

DE

Durch einige Verbesserungen kann das aktuelle Produkt von dem angezeigten Bild abweichen.

PL

Rzeczywisty produkt może różnić się od przedstawionych rysunków ze względu na wprowadzane

ulepszenia.

PT

O produto atual pode ser diferente das imagens apresentadas devido ao aperfeiçoamento do mesmo.

CCTVPROMT1

V. 01 – 25/02/2016 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should

be taken to a specialized company for recycling. This device should be returned to your distributor or

to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, do not install or use it and contact your dealer.

NOTE: This document is a Quick installation guide. For more details, refer to the full user manual, which can

be found on the included CD-ROM. Download the multilingual version of this document from www.velleman.eu.

This high-definition do-it-yourself security set is a great solution for home or business surveillance.

It contains two full HD CCTV or TVI (High-Definition Transport Video Interface) cameras with infrared LEDs,

20 m of power/signal cable for each camera and a full HD 4-channel digital video recorder which can

record in 1080P format. This system can be extended with other HD CCTV cameras, AHD cameras or 960H

analogue video cameras.

The system features intelligent motion-triggered recording, back-up on a 1 TB hard disk (incl.), via network or

via USB through a multi-language user interface.

Built-in VGA & HDMI interface, 1 audio input and 1 audio output and external alarm inputs.

USB mouse control with graphic user interface and on-screen display. IVS surveillance function including

counting people, virtual fence and single-channel motion recording.

Advanced mobile surveillance via free EagleEyes mobile phone software with push status and push video

function.

The DVR also sends push messages when there is a problem with the system.

The DVR instantaneously sends the video images to the activated mobile device when the alarm is triggered.

2. Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this

apparatus from the type of power source indicated on the label. The company shall not be liable for any

damages arising out of any improper use, even if we have been advised of the possibility of such damages.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of non-insulated “dangerous voltages” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation mark within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

appliance.

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening

electroshocks. Have the device repaired by qualified personnel.

Always disconnect mains power when device not in use or when servicing or maintenance activities

are performed. Handle the power cord by the plug only.

DO NOT disassemble or open the cover unless otherwise indicated in this manual. There are no

user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare

parts.

This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the

power cord). The mains plug shall only be inserted in a socket outlet provided with a protective

earth contact. Any interruption of the protective conductor inside or outside of the instrument is

likely to make the instrument dangerous. Intentional interruption is prohibited.

CCTVPROMT1

V. 01 – 25/02/2016 4 ©Velleman nv

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of the full user manual which can

be found on the included CD-ROM.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.

Never put objects filled with liquids on top of or close to the device.

Keep this device away from dust and extreme temperatures. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front

of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

 Familiarise yourself with the functions of the device before actually using it.

 All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

 Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

 Keep this manual for future reference.

 DO NOT use this product to violate privacy laws or perform other illegal activities.

4. Features

 compression format: H.264 real-time

 tribrid video input: AHD, TVI & 960H video

 powerful mobile surveillance support on all major platforms including iPad®, iPhone®, BlackBerry®, Windows

Mobile®, Symbian® and Android®

 mobile phone connection via 3G/4G data or Wi-Fi

 GUI (Graphical User Interface) display and USB mouse control

 Intelligent Video Analysis: 4 channels

o virtual fence: a virtual intruder detection line is set to detect intruders crossing the detection line

o flow counting: a virtual detection line is set to detect the moving direction of pedestrians for flow

counting

 automatic integrated Dynamic Domain Name Service (DDNS): free service

 contains:

o 1 x full HD DVR with push video & status function

o 2 x IR colour cameras: CAMTVI1

o 2 x 20 m camera cables:

o 1 x 19 V PSU

o 1 x high-efficiency DC-DC converter for DVR and cameras: DVR4/DC

 multi-language OSD: English, French, Dutch, German, Portuguese, Spanish, Czech, Hungarian, Greek,

Chinese, and Vietnamese

 user manual: English

 quick start manual: English, Dutch, French, Spanish, German

 * computer mouse not included

 Note: this product requires a minimum of network installation knowledge

CCTVPROMT1

V. 01 – 25/02/2016 5 ©Velleman nv

5. Hardware Setup

Refer to the illustrations on page 3 of this manual.

Connecting a Video Monitor

Obtain a suitable monitor (not included) and connect it to the HDMI or VGA video output port on the back of

the DVR.

Connecting the Power Supply

1. Plug the DC output connector of the included power adaptor into the 19 VDC power input at the back of

the DVR.

WARNING: only use the included adaptor.

2. Plug the included power cable into the adaptor input connector and plug the other end into the mains.

Do not switch the DVR on yet.

Connecting a Camera

1. You can connect up to four suitable cameras (2 cameras included). Each camera needs its own power

supply.

2. Connect the video output of the camera to either video input at the back of the DVR. The number next to

the input connectors represents the channel number. Connector type is BNC (cables included).

Connecting Audio

1. The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of the

DVR. Make sure to connect the audio channel to the corresponding video channel. Connector type is BNC.

2. There is also an audio output connector. Connect an audio device, e.g. a speaker to this connector when

desired. Connector type is BNC.

Connecting Local Area Network (LAN)

Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR.

Connector type is 8P8C (RJ45). To setup the network connection, press the Menu button and select . Refer to

the full manual on the included CD-ROM for details.

6. User Interface

Refer to the illustrations on page 2 of this manual.

6.1 DVR Access

1. Connect a USB mouse to the mouse port  on the DVR front panel, and check if there is a mouse icon

on the screen, indicating the USB mouse is detected properly.

2. Move your mouse to enter the DVR password with the password keypad. The default user name and

password are both admin.

The status will change from (key lock) to (unlock).

Note: You can configure four different user levels with different access privileges in the main menu

(SYSTEM) > ACCOUNT. For more information, refer to User Creation further in this manual.

6.2 Live Page

1. system time

2. DVR status bar

3. available HDD capacity

4. channel status bar

CCTVPROMT1

V. 01 – 25/02/2016 6 ©Velleman nv

DVR Status

key lock

key unlock

overwrite on

overwrite off

internet disconnected

internet connected

local connection

USB mouse connected

USB flash drive/device connected

no USB device connected

IVS on

timer recording on

timer recording off

PTZ mode on

PTZ mode off

sequence mode on

sequence mode off

Channel Status

original size

fit to screen

DCCS connection OK

DCCS connection

failed

live audio on

audio off

audio playback on

audio playback off

recording

human detection

event

motion event

alarm event

record mode: Frame

record mode: Field

record mode: CIF

virtual fence event

one way pass event

scene change event

Icons for Recording

 manual recording

By default, manual recording is on ( ) when the DVR is powered on and a HDD is installed.

 event recording

The event icons, / / / / / , are shown on the display when their respective events occur

and the related record function is on.

 timer recording

When timer recording is on, is displayed on the screen.

 HDD overwrite

By default, the HDD overwrite function is set to ON, and is displayed on the screen.

Note: To disable the overwrite function, right-click to display the main menu in the live view window. Then

select (ADVANCED CONFIG) > RECORD > OVERWRITE.

6.3 Quick Menu Bar

Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:

Quick Menu (extended)

Click to show the channel switch panel and select the

channel you want.

Click to display the playback control panel, and click

to play the latest recorded video clip, or click

to enter the search list.

Switch to the channel you want first, and click to

enter the zoom-in mode. In this mode, click and drag

the red frame on the bottom left of the screen to

move to the place you want to see. To exit this mode,

click .

Click to show the power off panel to either halt or

reboot the system.

CCTVPROMT1

V. 01 – 25/02/2016 7 ©Velleman nv

6.4 Main Menu

Main menu

QUICK START

Click to set the status display, image

settings, and date & time.

SYSTEM

Click to set the system configurations.

EVENT INFORMATION

Click to enter the event search menu.

ADVANCED CONFIG

Click to set CAMERA, DETECTION,

ALERT, NETWORK, DISPLAY, RECORD,

DEVICES, DCCS, IVS & NOTIFY.

SCHEDULE SETTINGS

Click to set record timer, detection

timer, and alarm timer.

Main Menu Structure

QUICK START

GENERAL

CHANNEL TITLE – EVENT STATUS – DATE DISPLAY – DCCS

DISPLAY – MOUSE SENSITIVITY – AUDIO GAIN – RECORD

CONFIG

TIME SETUP

DATE – TIME – NTP SERVER – FORMAT – SYNC PERIOD –

GMT

DAYLIGHT

EaZy*

SYSTEM

ACCOUNT

TOOLS

LANGUAGE – UPGRADE – NETWORK UPGRADE – BACKUP

CONFIG – RESTORE CONFIG

SYSTEM INFO

BAUD RATE – HOST ID – R.E.T.R. – AUTO KEY LOCK(S) –

CLEAR HDD – RESET DEFAULT – REMOTE CONTROL ID –

DEVICE TITLE – SERIAL TYPE – VIDEO FORMAT – VERSION

BACKUP DATA (USB)

BACKUP LOG (USB)

REGULAR REPORT

AUTO BACKUP

EVENT

INFORMATION

QUICK SEARCH

EVENT SEARCH

HDD INFO

EVENT LOG

ADVANCED

CONFIG

CAMERA

BRIGHTNESS – CONTRAST – SATURATION – HUE – REC –

TIME STAMP DISPLAY – CHANNEL TITLE – REC AUDIO –

ALARM OUT DURATION

DETECTION

LS – SS – TS – MOTION – ALARM – AREA – INTERNAL

ALARM

ALERT

EXT. ALERT – INT. BUZZER – KEY BUZZER – VLOSS

BUZZER – MOTION BUZZER – ALARM BUZZER – HDD

BUZZER – ALARM DURATION (SEC) – HDD NEARLY FULL

(GB) – HDD OVERHEAT ALERT (°C)

NETWORK

WAN – E-MAIL – DDNS – PROTOCOL – EaZy

DISPLAY

FULL SCREEN DURATION – HDD DISPLAY MODE – DISPLAY

OUTPUT – 3D DENOISE – 2D DENOISE – SHARPNESS

RECORD

MANUAL RECORD – EVENT RECORD – TIMER RECORD –

PRE-ALARM RECORD – OVERWRITE – KEEP DATA LIMIT

(DAYS) – RECORD CONFIG – SUBSTREAM RESOLUTION

DEVICES*

DCCS

IVS*

NOTIFY

PUSH VIDEO* – PUSH STATUS – MESSAGE MAIL – VIDEO

MAIL – VIDEO FTP

CCTVPROMT1

V. 01 – 25/02/2016 8 ©Velleman nv

SCHEDULE

SETTINGS

RECORD

DETECTION

ALARM IN

ALARM OUT

PUSH VIDEO

BUZZER

* For selected modes only

7. Hardware Overview

7.1 Front Panel

 LED indicators

o : DVR is powered on.

o : HDD is reading or recording.

 1–4: Press the channel number buttons to select the channel to display.

 : Press to show the 4-channel display mode.

 SEQ: Press to show all screens sequentially in full screen mode. Press again to quit.

 P.T.Z. ( + SEQ): Press + SEQ at the same time to enter or exit the PTZ control mode.

 SLOW: In playback mode, press to play the recorded file slowly.

 ZOOM: Press to enlarge the image of the selected channel (in FRAME or FIELD recording mode).

 AUDIO (SLOW + ZOOM): Press SLOW + ZOOM at the same time to select live or playback audio from audio

channel 1-4.

o : live audio from audio channel 1-4 (indicated in white)

o : playback audio from audio channel 1-4 (indicated in yellow)

o : audio channel unselected.

 PLAY: Press to playback the latest recorded data.

 LIST (Event List Search): Press to quickly search the recorded files by event lists: RECORD / MOTION /

ALARM / TIME / HUMAN DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.

To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.

 MENU: Press MENU to enter the main menu.

 ENTER: Press ENTER to confirm the setting.

 : Press ▲ / ▼ / ◄ / ► to move up / down / left / right.

In playback mode:

o Press  to pause playback.

o Press  to stop playback.

o Press  to fast forward.

o Press  to fast rewind.

 : USB port to connect a USB mouse for mouse control

 : USB port to connect a USB flash drive for video backup.

Note: Do not connect two USB mice or two USB flash drives simultaneously.

Note: For a list of compatible USB flash drives, please refer to the appendices in the full user manual.

7.2 Rear Panel

 INPUT (1–4): Connect to the video connector of a camera.

Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are

properly connected to the DVR and powered on before the DVR is turned on.

 VIDEO OUT: BNC.

 AUDIO IN (1): Connect to the audio connector of a camera if the camera supports audio recording.

Note: To make a video backup with audio, make sure the camera which supports the audio function is

connected to the video-in channel and audio-in channel. For example, the audio data from audio channel 1

will be recorded with the video data from video channel 1.

 AUDIO OUT (1): Mono audio output to connect to a speaker.

CCTVPROMT1

V. 01 – 25/02/2016 9 ©Velleman nv

 LAN: Connect to internet by LAN cable.

 EXTERNAL I/O: This port is used to connect external devices (such as speed dome cameras, external

alarms, etc.).

 HDMI: Connect to the HDMI port of a monitor that supports HDMI video output.

Note: You can use the HDMI and VGA output ports simultaneously for dual video output.

 eSATA: Connect to a storage device that supports the eSATA interface. For example, an external hard disk

or a disk array.

Note: Make sure that the disk array supports Linux® to ensure proper functioning.

 VGA: Connect to the VGA port of a monitor that supports HDMI video output.

Note: You can use the HDMI and VGA output ports simultaneously for dual video output.

 IR: Connect the IR receiver extension line for remote control.

 DC 19V: Connect to the supplied adapter.

8. Connection and Setup

8.1 Connecting a Monitor and Camera

1. Obtain a suitable monitor (not included) and connect it to the HDMI video output port on the back of

the DVR.

2. Obtain at least one suitable camera (not included). Each camera needs its own power supply.

3. Connect the video output of the camera to a video input at the back of the DVR (INPUT 1–4). The numbers

next to the input connectors represent the channel number. Connector type is BNC.

4. Power on the camera(s).

8.2 Switching On

Caution:

 Before the DVR is powered on, make sure that (1) the cameras are connected and powered on for the

detection of the camera video system to be correct, and (2) an HDMI monitor is connected to the DVR for

correct video output detection.

 This device should be operated only with the type of power source indicated on the manufacturer’s label.

Use only the included adapter.

To switch on the DVR:

1. Plug the DC output connector of the included power adapter into the power input (DC 12V) at the back of

the DVR.

2. Plug the included power cable into the adapter input connector and plug the other end into the mains.

3. Switch on the DVR with the power switch on the back of the device. The power LED lights on the front of

the DVR.

Note: To ensure that your DVR works constantly and properly, it is recommended to use an UPS

(Uninterruptible Power Supply, not incl.), for continuous operation.

8.3 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the

recorded data will be disordered and you will not be able to find the recorded file from backup by time search.

If users change the date or time accidentally when the recording function is activated, it is recommended to

clear all HDD data, and start recording again.

Note: When using the DVR for the first time, leave it powered on for at least 48 hours continuously after the

date and time is set correctly. It prevents DVR time from resetting if the DVR power is disconnected. If the DVR

time resets after power disconnection (for example caused by a power outage), the internal battery may run

down. In that case, you have to replace the internal battery. Please refer to the appendices in the full user

manual for more information.

1. Right-click to enter the DVR password with the password keypad. The default administrator password

is admin.

The status will change from (key lock) to (unlock).

2. Right-click to show the main menu, and select (QUICK START) > TIME SETUP to set the date and time.

CCTVPROMT1

V. 01 – 25/02/2016 10 ©Velleman nv

QUICK START

GENERAL

DATE

2009 / NOV / 17

TIME SETUP

TIME

15 : 35 : 53

DAYLIGHT

NTP SERVER

pool.ntp.org

EaZy

FORMAT

Y/M/D

SYNC PERIOD

OFF

GMT

(GMT + 8:00) TAIPEI

EXIT

8.4 Clearing the Hard Disk

It is recommended to clear all data in the hard disk when using this DVR for the first time to ensure the

recorded data are not mixed with other data previously saved in the same hard disk.

1. Right-click to show the main menu, and select (SYSTEM) > SYSTEM INFO > CLEAR HDD.

2. The DVR will reboot when HDD data are cleared. Please refer to the full user manual for more information.

SYSTEM

ACCOUNT

BAUD RATE

2400



TOOLS

HOST ID

000

SYSTEM INFO

R.E.T.R

5



BACKUP DATA

AUTO KEY LOCK(S)

NEVER



BACKUP LOG

CLEAR HDD

HDD-0



REGULAR REPORT

RESET DEFAULT

SUBMIT

REMOTE CONTROL ID

000

DEVICE TITLE

OFFICE

SERIAL TYPE

RS485

VIDEO FORMAT

NTSC

VERSION

1019-1008-1010-1010

EXIT

8.5 Password Setting

1. Right-click to show the main menu, and select (SYSTEM) > ACCOUNT to change the default password of

SUPERVISOR.

2. There are four user levels for different access privileges: SUPERVISOR, POWER USER, NORMAL, and

GUEST. For details, please refer to User Creation further in this manual.

SYSTEM

ACCOUNT

USER LIST

TOOLS

USER NAME

LEVEL

SYSTEM INFO

admin

SUPERVISOR

BACKUP DATA

power

POWER USER

BACKUP LOG

normal

NORMAL

REGULAR REPORT

guest

GUEST

EXIT

ADD

EDIT

DEL

CCTVPROMT1

V. 01 – 25/02/2016 11 ©Velleman nv

9. Basic Operation

9.1 Key Lock / Unlock

To lock or unlock the operation, click (key lock) or (unlock) in the DVR status bar to change the status.

When you unlock the operation, you have to enter a user name and password. The default user name and

password are both admin. These credentials give you access with the highest user level. For more information,

refer to User Creation further in this manual.

9.2 User Creation

Note: This function is only available for SUPERVISOR users.

To create a new user account, select (SYSTEM) > ACCOUNT. The list of users appears on the display.

SYSTEM

ACCOUNT

USER LIST

TOOLS

USER NAME

LEVEL

SYSTEM INFO

admin

SUPERVISOR

BACKUP DATA

power

POWER USER

BACKUP LOG

normal

NORMAL

REGULAR REPORT

guest

GUEST

EXIT

ADD

EDIT

DEL

The access rights for the different user levels are described below:

Function

User level

SUPERVISOR

POWER USER

NORMAL

GUEST

DVR status

/

Key lock/unlock

yes

Channel status

/

Live audio on/off

yes

/

Playback audio on/off

yes

/

Original size / fit to screen

yes

PTZ control

yes

Quick menu bar

Channel selection

yes

Playback

yes

Digital zoom

yes

Power

yes

Main menu

Quick start

yes

System

yes

Event information

yes

Advanced config.

yes

Schedule setting

yes

CCTVPROMT1

V. 01 – 25/02/2016 12 ©Velleman nv

Function

User level

SUPERVISOR

POWER USER

NORMAL

GUEST

Playback control

Fast forward

yes

Fast rewind

yes

/

Play/pause

yes

Stop

yes

Slow playback

yes

/

Previous/next hour

yes

Quick search

yes

9.3 Playback

Note: This function is not available for GUEST users.

Click on the quick menu bar to display the playback control panel, and click to play the latest recorded

video clip, or click to enter the search list.

Refer to the image below:

1

progress bar

4

control bar

2

close

5

event search

3

information bar

Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device

will stop playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds

(8192 images / 30 IPS) for the playback to work properly.

Playback Control

Fast forward

Increase the speed for fast forward. Click once to get 4x speed forward, click twice

to get 8x speed, etc. Maximum speed is 32x.

Fast rewind

Increase the speed for fast rewind. Click once to get 4x speed rewind, click twice to

get 8x speed, etc. Maximum speed is 32x.

/

Play/pause

Click to play the latest recorded video clip immediately, click again to pause.

In the pause mode, click once to get one frame forward, and click to get one

frame rewind.

Stop

Click to stop the video playback.

Slow playback

Click once to get 1/4x speed playback, and click twice to get 1/8x speed playback.

/

Previous /

next hour

Click to jump to the next/previous time interval in an hour, for example,

11:00 - 12:00 or 14:00 - 15:00, and start playing the earliest event video clip

recorded during this whole hour.

Repeat

Click to set point A and point B in a video clip, and the system will play only the

specified range in that clip.

Backup

Click to open the backup menu for video backup.

Event Search

 Click to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME / HUMAN

DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.

 To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.

Audio Playback

In playback mode, click or on the channel status bar to play or mute audio.

CCTVPROMT1

V. 01 – 25/02/2016 13 ©Velleman nv

Note: To make a video backup with audio, make sure the camera which supports the audio function is

connected to the video-in channel and audio-in channel. For example, the audio data from audio channel 1 will

be recorded with the video data from video channel 1.

9.4 Video Backup

Notes:

 This function is only available for SUPERVISOR users.

 Before using a USB flash drive, format it to FAT32 format first. For a list of compatible USB flash drives,

please refer to the appendices in the full user manual.

 For video backup, use a USB flash drive or back up your data via internet. Do not connect the HDD to your

PC directly.

To back up recorded data, proceed as follows:

1. Select (SYSTEM) > BACKUP DATA (USB).

SYSTEM

ACCOUNT

START DATE

2009/NOV/19

TOOLS

START TIME

08:30:21

SYSTEM INFO

END DATE

2009/NOV/19

BACKUP DATA

END TIME

17:59:29

BACKUP LOG

CHANNEL

3 SELECTED



REGULAR REPORT



ALL



CH1





CH2



CH3



CH4



CH5



HARD DISK

ALL HDD



OUTPUT FILE FORMAT

AVI

TARGET DEVICE

USB DEVICE

BACKUP

SUBMIT

REQUIRE SIZE: 554MB

SUBMIT

EXIT

AVAILABLE SIZE: 3788.0MB

2. Fill in START DATE, START TIME, END DATE, and END TIME to define the period of time for the video data

that you want to back up.

3. Select the video channel(s) that you want to back up.

4. In REQUIRED SIZE, select SUBMIT to calculate the file size of the data selected for backup.

5. In BACKUP, select SUBMIT to start backing up to your USB flash drive.

6. Wait until the “backup successful” message appears.

9.5 Digital Zoom

1. Switch to the channel you want to zoom in on, and move the cursor to the left side of the screen to display

the quick start bar.

2. Click to enter zoom mode.

3. In zoom mode, click and drag the red frame at the bottom left of the screen to move to the area you want

to see.

CCTVPROMT1

V. 01 – 25/02/2016 14 ©Velleman nv

4. To exit, right-click anywhere on the screen.

Note: You need to exit the zoom mode before you can use other DVR functions.

10. Push Video Configuration

10.1 Pin Connection

This DVR can send notifications to your mobile devices, such as iPhone, iPad, and Android mobile devices, if an

alarm event occurs (push video). However, only certain alarm-in pins support this function.

There are several methods to connect alarm sensors for push video:

 via the push video alarm-in terminal

 via the external I/O port.

Push Video Alarm-In Terminal

A push video alarm-in terminal is provided on the DVR rear panel. Refer to the image below for the pin

connections that support push video and its corresponding video channel.

Alarm Sensor Connection

Connect the alarm sensor, such as magnetic contacts, to the push video alarm-in terminal or I/O pins that

support push video on the DVR rear panel.

10.2 Configuration

Before configuring push video, make sure that:

 The DVR system is set up as described in Connection and Setup.

 The DVR is connected to internet and the external access configuration has been completed. Set the DDNS

in following menu: ADVANCED CONFIG – NETWORK – DDNS; set the port in following menu: ADVANCED

CONFIG – NETWORK – WAN; set the port forwarding in the router.

 You have installed the EagleEyes app on your iPhone, iPad, or Android mobile devices.

For details, please refer to Mobile Surveillance via EagleEyes.

To configure push video:

1. Right-click to show the main menu and select (ADVANCED CONFIG) > NOTIFY.

2. Set GUARD to ON.

3. Configure your alarm sensor type (normal open or normal closed).

CCTVPROMT1

V. 01 – 25/02/2016 15 ©Velleman nv

Careful! You have to select the opposite type for push video to work correctly.

 If your alarm sensor is N.C. (normal closed, alarm goes off when the contact opens), then select

ALARM N.O.

 If your alarm sensor is N.O. (normal open, alarm goes off when the contact closes), then select

ALARM N.C.

ADVANCED CONFIG

CAMERA

PUSH VIDEO

PUSH STATUS

MESSAGE MAIL

VIDEO MAIL

VIDEO FTP

DETECTION

RESET ALL GUARD CONNECTION

SUBMIT

ALERT

GUARD TRIGGER BY

ALARM IN 1



NETWORK

CH01

ALARM OFF / INTERNAL ALARM



CH1

DISPLAY

CH02

ALARM OFF



CH2

RECORD

CH03

ALARM N.O.



office

DEVICES

CH04

ALARM OFF



CH4

DCCS

IVS

NOTIFY

MULTICASTING

EXIT

4. Open EagleEyes and add this DVR to the EagleEyes address book.

Note: For more information on EagleEyes operation, please visit www.eagleeyescctv.com.

5. Enable push video.

6. Trigger the input alarm.

7. Receive an event notification and see video.

11. Mobile Surveillance via EagleEyes

EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation.

Note: For more operations details about EagleEyes, visit http://www.eagleeyescctv.com.

For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.

11.1 Prerequisite

Before installing EagleEyes on your mobile phone for remote surveillance, make sure you have checked the

following:

 Your mobile platform is iPhone, iPad, BlackBerry, or Android.

CCTVPROMT1

 You have subscribed to mobile internet services on your phone; the service is available for use on your

phone.

Note: You may be charged for internet access via wireless or 3G networks. For the internet access rates,

contact your local network operator or service provider.

 You have noted down the IP address, port number, user name, and password used to access your network

camera via internet.

11.2 Downloading EagleEyes

1. Connect to www.eagleeyescctv.com from your mobile device.

Note: Do not download EagleEyes from your computer.

2. Select Products > Software > Mobile app to access the EagleEyes introduction page.

3. Select your platform (iOS, BlackBerry, or Android) and download the program you need.

Note: This DVR is compatible only with iPhone, iPad, BlackBerry, and Android mobile devices.

4. Follow the on-screen instructions for downloading.

When the download is completed, EagleEyes is installed automatically on your mobile device.

Note: For more information about the configuration of this program, read the related instructions on the

download page.

12. Setting Up Push Video

This DVR series supports instant event notifications to your iPhone, iPad, or Android mobile device with

EagleEyes installed. When a human is detected by a human detection camera or the external alarm device, the

DVR will immediately receive alarm signals and send them to your mobile device.

12.1 Prerequisite

Before setting up push video, make sure you have checked the following:

 You have an iPhone, iPad, or Android mobile device with EagleEyes installed. For more details, see

Downloading EagleEyes.

 A human detection camera is connected to CH1, or an external alarm device is connected to the push video

alarm-in terminal on the rear panel. To record alarm occurrences, make sure you also have a camera

connected. Refer to Push Video Configuration for details on video channels and alarm pins.

 The event record function of your DVR is enabled.

 The motion detection function of your DVR is enabled.

 Your DVR is connected to internet. For details, refer to

http://www.surveillance-download.com/user/CMS.pdf.

12.2 Enabling Push Video

From iPhone or iPad

1. In the iPhone/iPad main menu, select Settings > Notifications.

2. Select EagleEyes and make sure Notification Center is set to ON.

CCTVPROMT1

3. Open EagleEyes and switch the Push Video button to ON. You will receive a message that push notification

(push video) is enabled.

4. Return to the main menu of your iPhone/iPad.

You will receive event notifications when there is a human detection or an alarm event. Select Launch to

play the recorded clip immediately.

From Android Mobile Device

In the address book, switch Guard from OFF to ON.

CCTVPROMT1

13. Push Status

Note: Before using this function, make sure that you have configured EagleEyes* and that the Guard has been

enabled. For details, please refer to chapter 12. Setting Up Push Video.

ADVANCED CONFIG

CAMERA

PUSH VIDEO

PUSH STATUS

MESSAGE MAIL

VIDEO MAIL

VIDEO FTP

DETECTION

ACTION

ON

ALERT

EVENT



ALL

NETWORK



VIDEO LOSS

DISPLAY



HDD FULL

RECORD



POWER ON

DEVICES



HDD (CLEAR / NO HDD / OVER TEMPERATURE)

DCCS



NET LOGIN

IVS



KEY UNLOCK

NOTIFY



UPS

MULTICASTING



SYSTEM ABNORMAL

EXIT

1. Set ACTION to ON.

2. Select the system event(s) you want to get notified via your mobile device.

3. Activate the push status of the device in the EagleEyes application. Go to CONFIGURATION – OPTIONAL –

PUSH STATUS.

14. Set Flow Counting – Virtual Fence – One-Way Pass

Note: Before using the IVS function, make sure that event recording is enabled on your DVR.

Intelligent Video Surveillance (IVS) is the advanced application for motion detection, but more precise and

smarter. It can be applied to different situations with one of the following three modes: FLOW COUNTING,

VIRTUAL FENCE or ONE WAY.

On the DVR, right-click to show the main menu, and select (ADVANCED CONFIG) > IVS.

CCTVPROMT1

ADVANCED CONFIG

CAMERA

IVS1

IVS2

IVS3

IVS4

DETECTION

CAMERA

CH3



ALERT

IVS MODE

FLOW COUNTING



NETWORK

DISPLAY LINE

OFF



DISPLAY

SENSITIVITY

07

RECORD

RESET COUNT

SUBMIT

DEVICES

VIRTUAL FENCE AREA

SETUP

DCCS

SCENE CHANGE

OFF



IVS

SCENE CHANGE LEVEL

MIDDLE



NOTIFY

EXIT

 CAMERA: Select the camera channel that you want to use with the IVS function.

 IVS MODE: Select one of the following three modes depending on your environment:

Mode

Description

FLOW COUNTING

A virtual detection line is set to detect the moving direction of pedestrians for flow

counting.

VIRTUAL FENCE

A virtual detection line is set to detect intruders crossing the detection line, and an

alarm will be triggered.

ONE WAY

A virtual detection line is set to detect intruders from the specified direction, and an

alarm will be triggered.

 DISPLAY LINE: Select to display the detection line for IVS on the screen or not.

 SENSITIVITY: Set the sensitivity for IVS from 00-15. The larger the value, the more sensitive the IVS

will be.

 RESET COUNT: Click SUBMIT to reset the flow counting number to 0 when the IVS mode is set to FLOW

COUNTING and activated.

 VIRTUAL FENCE AREA: Click SETUP to draw the detection line for IVS, and set the detection direction. This

area setting is the detection base for IVS MODE.

 SCENE CHANGE: Select ON to trigger a motion event when the camera is moved and the camera scene

changes. At the same time, the icon will also be shown on the screen in addition to the motion icon .

 SCENE CHANGE LEVEL: Set the detection sensitivity for SCENE CHANGE to HIGH, MIDDLE or LOW.

14.1 Flow Counting

1. Go to VIRTUAL FENCE AREA to draw a detection line with your mouse,

and decide the detection direction by selecting REVERSE.

2. Finish the IVS setting and return to the live view. The IVS icon will

be shown on the status bar.

3. Click it to show the flow counting panel as follows. When anyone walks

across the detection line, the system will determine if the movement is

in or out, and add one count to the corresponding channel on the flow

counting panel.

IN People coming from the opposite direction to the arrow mark.

OUT People coming from the same direction as the arrow mark.

CCTVPROMT1

14.2 Virtual Fence / One-Way Pass

1. Go to VIRTUAL FENCE AREA to draw a detection line with your mouse,

and decide the detection direction by selecting REVERSE.

2. Finish the IVS setting and return to the live view.

When anyone walks across the detection line, the system will

determine his movement is in or out.

 VIRTUAL FENCE An event is triggered when anyone walks across

the detection line from any direction, and is shown on the screen.

 ONE WAY An event is triggered when anyone walks across the

detection line from the opposite direction of the arrow mark, and is

shown on the screen.

14.3 IVS Statistics

1. In the live view, move the mouse to the left to display the quick menu bar.

2. Click and then to enter the event search menu.

3. Select STATISTIC.

LIST

QUICK SEARCH

CHANNEL

3 SELECTED



RECORD



ALL

MOTION



CH1



ALARM



CH2

TIME



CH3

HUMAN DETECTION



CH4

IVS



FULL

STATISTIC

EVENT TYPE

3 SELECTED





ALL



INFLOW





OUTFLOW



VIRTUAL FENCE



ONEWAY



MOTION



TIME

2010/MAY/17

STATISTIC

SUBMIT

EXIT

4. Set all the criteria you want to search, and click SUBMIT in STATISTIC to show the event statistics.

5. Click LIST or CHART to see the statistics in list or chart form.

6. To switch to the month or year view, click DAY at the bottom.

Strona jest ładowana ...

Velleman CCTVPROMT1 Quick Installation Manual

Velleman CCTVPROMT1 Quick Installation Manual

w innych językach

Powiązane dokumenty

Inne dokumenty