4XEM IPCAMW45 Instrukcja obsługi

Product name: Network Camera (IPCAMW45)

Release Date: 2007/06/05

Manual Revision: 1.2

Web site: http://www.4xem.com/

Email: mailto:technical@4xem.com

mailto:[email protected]

www.4XEM.com

T: 1-866-999-4XEM

F: 1-519-754-0686

Table of Contents

Before You Use This Product .......................................................................... 1

Package Contents ......................................................................................... 2

Installation ..................................................................................................3

Hardware Installation ................................................................................................ 3

Software Installation.................................................................................................. 4

Initial Access to the Network Camera.......................................................................... 5

Check Network Settings.............................................................. 5

Add Password to Prevent Unauthorized Access...............................5

How To Use

Installing Plug-in....................................................................................................... 6

Primary User’s Capability............................................................................................ 7

Main Screen with Camera View.................................................... 7

Digital Zoom ............................................................................. 7

Snapshot ..................................................................................8

Client Settings...........................................................................8

Digital Output............................................................................9

Administrator’s Capability

Fine-tuning for Best Performance............................................... 10

Opening Accounts For New Users............................................... 12

Build a Security Application....................................................... 13

Software Revision Upgrade ....................................................... 14

Configuration ............................................................................................. 15

System Parameters ..................................................................................................16

Security Settings......................................................................................................17

Network Settings......................................................................................................18

Network Type.......................................................................... 18

HTTP ...................................................................................... 19

RTSP Streaming....................................................................... 19

DDNS......................................................................................................................19

Access List...............................................................................................................20

Audio and Video

General .................................................................................. 21

Video Settings ......................................................................... 21

www.4XEM.com

T: 1-866-999-4XEM

F: 1-519-754-0686

Video Orientation..................................................................... 22

Audio settings ......................................................................... 22

Image Settings........................................................................ 22

Email & FTP

Email...................................................................................... 23

FTP ........................................................................................ 24

Motion Detection......................................................................................................25

Application Settings..................................................................................................26

Snapshot ................................................................................ 26

Video Clip ............................................................................... 28

Digital Output.......................................................................... 30

System Log..............................................................................................................31

Viewing System Parameters ......................................................................................32

Maintenance............................................................................................................32

Appendix

A. Troubleshooting...................................................................................................33

Status LED.............................................................................. 33

Reset and Restore.................................................................... 33

B. URL Commands of the Network Camera.................................................................34

Get server parameter values ..................................................... 34

Set server parameter values ..................................................... 35

Available parameters on the server ............................................ 36

Application page CGI command ................................................. 45

Capture single snapshot............................................................ 47

Account management............................................................... 48

System Logs ........................................................................... 49

Configuration file ..................................................................... 49

Upgrade Firmware.................................................................... 50

C. Technical Specifications ........................................................................................51

Technology License Notice ........................................................................... 52

Electromagnetic Compatibility (EMC)............................................................. 53

Liability ..................................................................................................... 53

www.4XEM.com

T: 1-866-999-4XEM

F: 1-519-754-0686

Before You Use This Product

The use of surveillance devices may be prohibited by law in your country. The Network Camera

is not only a high-performance web-ready camera but also can be part of a flexible surveillance

system. It is the user’s responsibility to ensure that the operation of such devices is legal before

installing this unit for its intended use.

It is important to first verify that all contents received are complete according to the list in the

"Package Contents" chapter. Take notice of the warnings in the “Quick Installation Guide”

before the Network Camera is installed, then carefully read and follow the instructions in the

“Installation” chapter to avoid damages due to faulty assembly and installation. This also

ensures the product is used as intended.

The Network Camera is a network device and its use should be straightforward for those who

have basic network knowledge. The “Troubleshooting” chapter in the Appendix provides

remedies to the most common errors in set up and configuration. You should consult this

chapter first if you run into a system error.

The Network Camera is designed for various applications including video sharing, general

security/surveillance, etc. The “How to Use” chapter suggests ways to best utilize the

Network Camera and ensure proper operations. For the creative and professional developers,

the "URL Commands of The Network Camera " chapter serves to be a helpful reference to

customize existing homepages or integrating with a current web server.

1.

For paragraphs preceded by the reader should use caution to understand

completely the warnings. Ignoring the warnings may result in serious hazards o

r

injuries.

-1-

www.4XEM.com

T: 1-866-999-4XEM

F: 1-519-754-0686

Package Contents

IPCAMW45

Power adapter

Camera stand

Software CD

Quick installation guide

Warranty card

-2-

- 3 -

www.4XEM.com

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and

"Administrator" refers to the person who can configure the Network Camera and grant user

access to the camera.

Hardware Installation

Blinking Red Power is being supplied to the camera.

Steady Green The camera is booting up.

Blinking Orange & Green The camera is trying to obtain an IP address.

Steady Orange An IP address is successfully assigned to the camera.

Blinking Orange & Red The camera is working.

Fast Blinking Orange & Red During firmware upgrading.

Proceed to software installation when the LED status light blinks orange & red.

Status LED Color Description

Using the Power Adapter as power source:

1. Plug the Ethernet cable into the Network Camera.

2. Connect the Power Adapter to the Network Camera.

3. Plug the Power Adapter into electrical outlet.

4. Observe LED status lights (status light progression specified

below).

Using Power over Ethernet PoE as power source:

1. Connect one end of Ethernet cable to 12V PoE injecto

r

(purchased separately).

2. Connect the other end of Ethernet cable to the Network

Camera.

3. Observe LED status lights (status light progression specified

below).

The Power Adapter is not used when powering with PoE.

The Ethernet cable

should meet the specs

of UTP category 5 and

not exceed 100 meters

in length.

- 4 -

www.4XEM.com

Digital Input/Output Terminal

This Network Camera provides a general I/O terminal

block with one digital input and one digital output

device control.

Software Installation

When the hardware installation is complete, users can use the Installation Wizard program

included in the product CDROM to find the location of the Network Camera. There may be

many Network Cameras in the local network. Users can differentiate the Network Cameras

with the serial number. The serial number is printed on the labels on the carton and the

back of the Network Camera body. Please refer to the user’s manual for the Installation

Wizard for more details.

Once the installation is complete, the Administrator should proceed to the next

section "Initial access to the Network Camera" for necessary checks and

configurations.

- 5 -

www.4XEM.com

Initial Access to the Network Camera

Check Network Settings

The Network Camera can be connected either before or immediately after software installation

onto the Local Area Network. The Administrator should complete the network settings on the

configuration page, including the correct subnet mask and IP address of the gateway and the

DNS Servers. Ask your network administrator or Internet service provider for the details. If any

setting is entered incorrectly and you cannot proceed with setting up the Network Camera,

restore the factory settings following the steps in the “Troubleshooting” chapter in the

Appendix.

Add Password to Prevent Unauthorized Access

The default

Administrator’s

password is blank and

the Network Camera

initially will not ask for

any password. The

Administrator should

immediately assign a

new password as a

matter of prudent

security practice.

Once the

Administrator’s

password is saved,

the Network Camera will ask for the user’s name and password before each access. The

Administrator can set up a maximum of twenty (20) user accounts. Each user can access the

Network Camera except to perform system configuration. Some critical functions such as

system configuration, user administration, and software upgrades are accessible only by the

Administrator. The user name for the Administrator is permanently assigned as “root”. Once the

password is changed, the browser will display an authentication window to ask for the new

password. Once the password is set, there is no provision to recover the

Administrator’s password. The only option is to restore to the original factory

default settings.

- 6 -

www.4XEM.com

How to Use

Installing Plug-in

For the initial access to the Network Camera in Windows, the web browser may prompt for

permission to install a new plug-in for the Network Camera. Permission request depends on the

Internet security settings of the user’s PC or notebook. If the highest security level is set, the

computer may

prohibit any

installation and

execution

attempt.

This plug-in has

been registered

for certificate and

is used to display

the video in the

browser. Users

may click on

to

proceed. If the

web browser does

not allow the user

to continue to

install, check the

Internet security option and lower the security levels or contact your IT or networking

supervisor for help.

- 7 -

www.4XEM.com

Primary User’s Capability

Main Screen with Camera View

Snapshot: Opens a still

picture of current view in

new window.

Client Settings:

Configures local Browser

settings.

Configuration:

Provides access to all

camera configuration

options.

Camera View: Live

streaming video.

Digital Zoom

Click on the magnifier

icon under the camera

view then the digital zoom

control panel will be

shown. Uncheck “Disable

digital zoom” and use the

slider control to change

the zoom factors.

- 8 -

www.4XEM.com

Snapshot

Click on Snapshot, web

browser will pop up a new

window to show the

snapshot. Users can point

at the snapshot and click

the right mouse button to

save it.

Client Settings

There are two settings

for the client side:

Media Options to

determine the type of

media to be streamed

and Protocol Options

which allows choice of

connection protocol

between client and

server. There are two

protocol choices to

optimize your usage –

UDP and TCP.

- 9 -

www.4XEM.com

The UDP protocol allows for more real-time audio and video streams. However, some packets

may be lost due to network burst traffic and images may be obscured. The TCP protocol allows

for less packet loss and produces a more accurate video display. The downside with this

protocol is that the real-time effect is worse than that with the UDP protocol. If no special

need is required, UDP protocol is recommended. Generally speaking, the client’s choice will be

in the order of UDP – TCP.

After the Network Camera is connected successfully, Protocol Option will indicate the selected

protocol. The selected protocol will be recorded in the user's PC and will be used for the next

connection. If the network environment is changed, or the user wants to let the web browser

detect again, manually select the UDP protocol, save, and return HOME to re-connect.

Digital Output

Click on ON, the digital output of the Network Camera will be triggered. Or, clicking on OFF can

let the digital output turn into normal state.

- 10 -

www.4XEM.com

Administrator’s Capability

Fine-tuning for Best Performance

Best performance generally equates to the fastest image refresh rate with the best video

quality, and at the lowest network bandwidth as possible. The three factors, Maximum frame

rate, Constant bit rate, and Fix quality on the Audio and Video Configuration page, correlate

to allow for achieving the best performance possible.

For Viewing by Mobile Phone

Most 3GPP cell phone supports media streaming with MPEG4 video and GSM-AMR audio. Due to

the limitation of the bandwidth for 3GPP, only 176x144 video solution will be supported for cell

phone viewing. Select the Configure for mobile viewing option will change the range of

other related video settings.

- 11 -

www.4XEM.com

For Best Real-time Video Images

To achieve good real-time visual effect, the network bandwidth should be large enough to allow

a transmission rate of greater than 20 image frames per second. If the broadband network is

over 1 Mbps, set the Fix bit rate to 1000Kbps or 1200Kbps, and set Fix quality at the highest

quality. The maximum frame rate is 30. If your network bandwidth is more than 512Kbps, you

can fix the bit rate according to your bandwidth and set the maximum frame rate to 30 fps. If

the images vary dramatically in your environment, you may want to slow the maximum frame

rate down to 20 fps in order to lower the rate of data transmission. This allows for better video

quality and the human eyes cannot readily detect the differences between 20, 25, or 30 frames

per second. If your network bandwidth is below 512 Kbps, set the Fix bit rate according to

your bandwidth and try to get the best performance by fine-tuning with the Maximum frame

rate. In a slow network, greater frame rate results in blur images. Another work-around is to

choose 160x120 in the Size option for better images. Video quality performance will vary

somewhat due to the number of users viewing on the network, even when the parameters have

initially been finely tuned. Performance will also suffer due to poor connectivity because of the

network’s burst constraint.

Only Quality Images Will Do

To have the best video quality, you should set Fix quality at Detailed or Excellent and adjust

the Maximum frame rate to match your network’s bandwidth. If your network is slow and you

receive “broken” pictures, go to the TCP protocol in Connection type and choose a more

appropriate mode of transmission. The images may suffer a time delay due to a slower

connection. The delay will also increase with added number of users.

Somewhere Between Real-time and Clear Images

If you have a broadband network, set Fix quality at Normal or better, rather than setting Fix

bit rate. You can also fix the bandwidth according to your actual network speed and adjust the

frame rate. Start from 30 fps down for best results but not below 15 fps. If the image

qualities are not improved, select a lower bandwidth setting.

- 12 -

www.4XEM.com

Opening Accounts For New Users

Protect Network Camera by passwords

The Network Camera is shipped without any password by default. That means everyone can

access the Network Camera including the configuration as long as the IP address is known. It

is necessary to assign a password if the Network Camera is intended to be accessed by others.

Type a new word twice in

to enable protection. This password is used to identify the

administrator. Then add an account with user name and password for your friends in .

The Network Camera can provide twenty accounts for your valuable customers or friends. You

may delete some users from .

1

2

3

1

2

3

- 13 -

www.4XEM.com

Build a Security Application

The Administrator can use the built-in motion detection to monitor any movement and perform

many useful security applications. To upload the snapshots, users can choose either email or

FTP according to user’s needs. Both e-mail and FTP use the network settings on the Email and

FTP page.

1. Click on Configuration on homepage,

2. Click on Motion detection at the left column,

3. Check Enable motion detection,

4. Click on new to have a new window to monitor video,

5. Type in a name to identify the new window,

6. Use the mouse to click, hold, and drag the window corner to resize or the title bar to move,

7. Fine-tune using the Sensitivity and Percentage fields to best suit the camera’s

environment. Higher Sensitivity detects the slighter motion. Higher Percentage

discriminates smaller objects,

8. Clicking on Save enables the activity display. Green means the motion in the window is

under the watermark set by Administrator and red means it is over the watermark,

9. Click on Application at the left column,

10.Check the weekdays as you need and give the time interval to monitor the motion detection

every day,

11.Select the Trigger on Motion detection.

12.Set the delay before detecting next motion to avoid continuous false alarms following

the original event,

13.Set the number of pre-event and post-event images to be uploaded,

14.Check the window name set in step 5,

15.Check the way to upload snapshot.

16.Click on save to validate.

- 14 -

www.4XEM.com

Software Revision Upgrade

Customers can obtain the up-to-date software from the web site of 4XEM. An easy-to-use

Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade

function is opened to the Administrator only. To upgrade the system, follow the procedures

below.

1. Download the firmware file from www.4xem.com.

2. Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the

Upgrade Wizard for details.

3. Or upgrade firmware from HTTP web page directly

3. The whole process will finish in a few minutes and it will automatically restart the system.

If power fails during the writing process of Flash memory, the program in the

memory of the Network Camera may be destroyed permanently. If the Network

Camera cannot restart properly, call 4XEM Technical Support.

- 15 -

www.4XEM.com

Configuration

Only the Administrator can access system configuration. Each category in the left column will

be explained in the following pages. The bold texts are the specific phrases on the Option pages.

The Administrator may type the URL below the figure to directly enter the frame page of

configuration. If the Administrator also wants to set certain options through the URL, read the

reference appendix for details.

- 16 -

www.4XEM.com

System Parameters

Host name: The text displays the title at the top of the main page.

Turn off the LED indicator: Check this option to shut off the LED on the rear. It can prevent

the camera’s operation being noticed.

Time zone: Adjust the time with that of the time-servers for local settings.

Keep current date and time: Click on this to reserve the current date and time of the

Network Camera. An internal real-time clock maintains the date and time even when the power

of the system is turned off.

Sync with computer time: Synchronizes the date and time of the Network Camera with the

local computer. The read-only date and time of the PC is displayed as updated.

Manual: Adjust the date and time according to what is entered by the Administrator. Notice the

format in the related fields while doing the entry.

Automatic: Synchronize with the NTP server over the Internet whenever the Network Camera

starts up. It will fail if the assigned time-server cannot be reached.

NTP server: Assign the IP address or domain name of the time-server. Leaving the text box

blank connects the Network Camera to the default time-servers.

Update interval: Select hourly, daily, weekly, or monthly update with the time on the NTP

server.

Digital input: Select High or Low to define normal status of the digital input.

Digital output: Select Grounded or Open to define normal status of the digital output.

Reset digital output: The check box enable the function of resetting digital output. When the

digital output is triggered, after the number time the digital output will reset into normal state.

Remember to click on

to immediately validate the changes. Otherwise, the correct time

will not be synchronized.

Strona jest ładowana ...

4XEM IPCAMW45 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

4XEM IPCAMW45 Instrukcja obsługi

w innych językach

Inne dokumenty