media-tech MT4009 Instrukcja obsługi

Marka: media-tech

Model: MT4009

Kategoria: Bramki / kontrolery

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

IP WEBCAM MT4009

IP WEBCAM

Instruction manual

Remote Surveillance IP Camera

MT4009

Table of Contents

1. Overview

1.1 General Overview ...............................................................................2

1.2 Product Applications .........................................................................3

1.3 Package Includes .................................................................................3

1.4 System Requirements ........................................................................3

2. Utilities And Tools

2.1 Cam EZ Search ......................................................................................3

2.2 MT4009 Exterior Function Introduction .....................................4

2.3 TV Out Function Introduction ........................................................5

3. Getting Start

3.1 System Login .........................................................................................5

3.2 Liveview ..................................................................................................6

3.3 Take A Shot ............................................................................................7

4. Advanced Function With Liveview

4.1 Image Adjustment .............................................................................8

4.2 Avi Record Setup ................................................................................8

4.3 Zoom In Display ..................................................................................8

4.4 Motion Detection Setup ..................................................................9

5. Advanced Application

5.1 Image Setup ..........................................................................................9

5.2 Capture View ...................................................................................... 10

5.3 Event Trigger ...................................................................................... 11

5.4 Network Setup ................................................................................... 11

5.5 Server Setup ....................................................................................... 13

5.6 Administration Setup ...................................................................... 14

5.7 Update .................................................................................................. 15

Appendix

Appendix A. Using a PPPOE Dial Up Connection and DDNS

with the MT4009 EZ IP WEBCAM (using a hub) .............................. 16

Appendix B. FAQ ....................................................................................... 22

1. Overview

1.1 General Overview

MT4009 is the most aﬀ ordable and eﬃ cient remote surveil-

lance / security program available. It is extremely simple

to install, and can be used without a computer. With its in-

ternal web server, users can conduct remote video surveil-

lance and security tasks from a web browser (such as IE or

Netscape), and quickly observe surveillance video feeds at

any time, anywhere from local network or Ethernet Inter-

net connection.

The MT4009 combines CPU, CMOS Sensor Control, Image

processor, GPU, JPEG, CODEC, Ethernet MAC function that

is capable of 350,000 pps.

In addition, the system supports PPPoE, DHCP, Static IP,

DDNS, SMTP, FTP, NTP, and other types of network protocol,

and includes high eﬃ ciency SDRAM control and memory

access. Also, the internal TV Out decoder / encoder devices

allow display of common household television formats

(supports NTSC and PAL). The system also includes fast

Motion Detection and SD expansion slot. The MT4009 has

Night Vision IR LED’s allowing it to see in the dark or assist

in low light situations. A professional grade remote surveil-

lance and camera technology for many fun and security

purposes.

The MT4009 is the most aﬀ ordable quality network surveil-

lance and broadband camera system on the market, and it

is the most intelligent choice for business of all kinds.

1.2 System Requirements

Minimum System Requirements

■ CPU: Intel Pentium 4® 2.0GHz or equivalent

■ Memory: 64MB (256MB recommended)

■ Operating System: Windows 98, Windows 2000® or Win-

dows XP®

■ Browser: Microsoft IE 6.0® and later

■ Hard Disk Space: 10MB Minimum

■ Network: 10/100Mbps Ethernet Port

1.3 Package Includes

1. IP WEBCAM

2. DC5V adapter

3. RJ-45 Red Cable(connect to PC)

4. RJ-45 Blue Cable(connect to internet)

5. TV Cable

6. CD-Rom

7. User’s Guide

8. Screw Bag

2. Utilities and Tools

2.1 CAM EZ SEARCH

CAM EZ Search is a searching application capable of search-

ing for IP WEBCAM on the local network. The application

urges all IP WEBCAM to respond by sending out query

packets, and then displays a list of all IP WEBCAM available

on the network. In addition, CAM EZ allows the network

settings of a designated IP WEBCAM to be changed (such

IP address or name). CAM EZ can be used by following

these easy steps:

1. Open CAM EZ Search application.

2. Check to see if the IP addresses from the network are the

same as shown in CAM EZ Search: Go to Control panel

> Go to Network and Dialup Connection > Select the

settings for the local network connection being used

> Right click using your mouse > Select Preferences (P)

> Select Internet Protocol (TCP/IP) > Select Preferences

(R), and you can view the IP address for your computer.

If the settings are diﬀ erent, you must update the IP set-

tings for the MT4009 EZ IP WEBCAM. Do so as follows:

1.4 Product Applications

- IP WEBCAM - Web Server

- IP Surveillance - IP DVR

- Networking - Real-time Remote Monitoring

Surveillance - Value-Added IP

- IP Video Server Surveillance Device

TOP

Step 1: Name: The user can rename the MT4009 EZ IP WE-

BCAM.

Step 2: IP: The IP address of the MT4009 EZ IP WEBCAM (for

example with a computer with an IP of 192.168.1.159, the

user would have to set the MT4009 EZ IP WEBCAM IP to

192.168.1.* (* = 1~254).

Step 3: Sub Mask (U): Usually set to 255.255.255.0

3. Step 4: Gateway: Change to correspond with the gate-

way settings of the network.

4. Step 5: HTTP Port: Change to 80

After settings are complete, press Submit, and the MT4009

EZ IP WEBCAM settings will take eﬀ ect.

Press Update to update the MT4009 EZ IP WEBCAM menu.

Left click twice with your mouse on the desired name from

the list, and a browser window will open automatically,

displaying the CAM EZ Search network surveillance feed

icon:

2.2 MT4009 Exterior Function Introduction

Reset Switch button operation: When in operation, press

Switch button for 3 seconds the system will reboot. If you

press and hold down the SW button for longer than 5 sec-

onds, the system will return to factory default settings.

TOP

2.3 TV OUT Function Introduction 3. TV_OUT Operation :

■ Push to Ch-Flk: Press Reset switch button once, you can

adjust Ch-Flk 50Hz, 60Hz, Outdoor.

■ Hold to Exit: Press and hold down for 2 seconds, Exit Ch-

Flk window.

Reset

Switch

TV OUT Default setting is NTSC system, please press

Reset switch and hold on for 3 seconds to change to

PAL system.

1. Connect the AV cable between TV set and IP WEBCAM as

the drawing.

2. Press RESET switch and plug in power adaptor at same

time, continuously hold on your press on RESET switch

for 2 seconds then release the press, the IP WEBCAM will

enter into “TV Out mode”.

3. Getting Start

3.1 SYSTEM LOGIN

System login is the process of identifying all people try-

ing to log into the system, as to conﬁ rm user identify, and

granting authorized users access to the system’s functions.

This system provides two layers of security access: “admin-

ister” and “general user”. After a successful login to the sys-

tem, users can begin to access both surveillance and set-

ting functions, follow the steps below:

Step 1: Open the login window, as shown below.

Directions: Using the

CAM EZ Search applica-

tion, select the MT4009

EZ IP WEBCAM menu,

and click twice.

TOP

Step 2: The system login window will appear in IE as

shown:

Step 3: Enter Account ID and Password

Step 4: Press “Submit” to conﬁ rm, and the a network sur-

veillance window shall appear, as shown:

Step 5: Enter “admin” as the Account ID, and “password” for

the password.

Step 6: If a mistake has been made, press “Cancel” , and en-

ter login information again.

3.2 LIVEVIEW

When using IP WEBCAM for the ﬁ rst time, users must

change the IE security settings (please refer to settings

step 3.2.1). Otherwise, the system will display the follow-

ing warning, and be unable to display the surveillance

feeds.

After having successfully set up the IP WEBCAM settings

during the ﬁ rst use,

users do not need

to change the set-

tings again for later

use.

3.2.1 The IE security settings can be changed

by following the

steps below:

Step 1:

IE Toolbar ---> Tools -

--> Internet Settings

---> Security --->

Custom Settings (C)

TOP

Step 2: After clicking on Custom Settings(C), a security set-

tings window shall appear.

Change ActiveX Control Options and Plug-ins settings to

the following:

1. Download signed ActiveX controls: Enable

2. Download unsigned ActiveX controls: Enable

3. Initialize and script ActiveX controls not marked as safe:

Enable

4. Run ActiveX controls and plug-ins: Enable

5. Script ActiveX controls marked safe for scripting: Enable

Step 3: After pressing “OK”, a warning window shall appear.

Click on “Yes” (Y), and you shall return to the last window.

Press “OK”, and the setup is completed.

Step 4: At this time, the computer should display a warning

window then press “Yes” (Y).

Step 5: When completed,

you may begin viewing the

surveillance image for the

ﬁ rst time as shown.

NOTE: This action loads ActiveX components from the

MT4009 System to a local machine.

3.3 TAKE A SHOT

This function allows users to capture the screen shot as a

photo, and save it on the computer.

Directions:

Step 1: Go to the “LiveView” menu, and go to the live image.

Step 2: Select an image, and hold down the Ctrl key.

Step 3: Place the cursor on the surveillance image and left

click with your mouse. The captured image should ﬂ ash

momentarily: (or press the “Snapshot” button).

Step 4: Release the Ctrl key, and the single still shot image

has been successfully captured.

Step 5: Select the “CaptureView” menu to browse through

the captured images.

TOP

4. Advanced Function with LIVEVIEW

Move the cursor to the live image, and right click with your

mouse. A small menu should appear with four options.

Image: Adjust image values

Record: Setup for recording into AVI format.

Zoom: Select digital zoom value for window.

Motion Detec Set: Settings for motion detection

These settings are described in detail in the next chapter.

4.1 Image Adjustment

After selecting an Image, you may change various image

settings as shown:

4.2 AVI Record Setup

By selecting “Record”, you can adjust the AVI Frame Rate

settings and ﬁ le name.

4.3 Zoom In Display

Using your mouse, select the portion of video that you

wish to view, and release. The image will zoom in accord-

ing to the dimensions entered.

TOP

4.4 Motion Detection Setup

Setting up the Motion Detection (MD) values, including

the ﬁ rst set (red) and second set (green).

Please check to see whether the Event Trigger has been en-

abled. If so, you can set it up as described below:

Reset MD range: Select motion detect 1, and hold down

on the left mouse button (this will appear as the upper left

corner of the MD range). Then, drag out the desired range,

and release when ﬁ nished.

Cancel MD: Same as above, but just left click once and re-

lease. This will cancel the MD (Motion Detection).

Motion detec set: This sets the MD (Motion Detection)

sensitivity, which is usually set to a value of 5. This means

that the motion detection will be toggled with as little of

a 5% change in the MD range. The lower the number en-

tered, the higher the sensitivity of the MD.

When MD is engaged, the screen should display a MD

warning in the upper left hand corner if there is movement

within MD1 or MD2, as shown:

Any motion detection range can be selected in 640x480

and 320x240 resolutions

In 160x120 resolution, the motion detection is ﬁ xed to the

entire image.

5. Advanced Application

This chapter explains the advanced settings for the MT4009

EZ IP WEBCAM, including:

- Image Setup - Event Trigger Setup

- Capture View - Administration Setup

- Network Setup - FW Update

- Server Setup

5.1 Image Setup

This includes:

■ Resolution: Users can select between image resolution

of 160x120, 320x240, and 640x480. The default resolu-

tion is 320x240.

■ Quality: Users can select between “ﬁ ne”, “normal”, and

“basic” image quality. The default image quality is “basic”.

TOP

■ Anti-Flicker: Users can select between 60Hz, 50Hz, or

Outdoor. The default setting is 50Hz. Please change to

“outdoor” when shooting outside.

■ Audio: Audio output. Default setting is “oﬀ ”.

■ Rotate 180: Image reverse. Default setting is “oﬀ ”.

■ IR Auto Detection: IR LED control. Default setting is “oﬀ ”.

Image Setup Directions:

Step 1:

Click on “ImageSet” to view the menu.

Step 2:

After entering the desired values, click on “Submit”.

Step 3:

If you wish to cancel your changes, click on “Cancel”.

5.2 Capture View

This view includes;

- Manual capture of still images using LiveView.

- Automatic capture of still images via MD.

How to Use Capture View:

Step 1:

Click on CaptureView to enter the menu.

The menu is capable of displaying up to 48 images, view-

able on three pages.

Step 2:

You can set the system

to read from either your

computer or your ﬂ ash

card.

After making your se-

lection, click on “Apply”.

Step 3:

Select desired thumb-

nail image using the

cursor to view image at

the default dimensions.

TOP

5.3 Event Trigger

This includes both event trigger settings and display, in-

cluding:

- Event: Entering events

- Trigger: Setting trigger

and picture capture times.

Detailed explanations are presented in the next chapter.

How to Use Event Settings:

Step 1: Engage Event for either set (MD will automatically

display the trigger sensitivity)

Step 2: After you are ﬁ nished, click on Submit.

Step 3: Otherwise, click on Default to use factory default

settings (all sets oﬀ )

NOTE: After engaging either type of event, “Save in PC”

will automatically turn on.

5.3.2 Trigger

Event trigger image transfer settings, including:

■ Save in PC: The image ﬁ le is saved in your computer.

■ Save in Flash Card: The image ﬁ le is saved in the SD

Card.

■ Mail Image: Send captured event trigger image ﬁ le by

e-mail.

■ FTP Image: Send captured event trigger image ﬁ le by

FTP.

■ Shutter Timer: Change shutter time for event trigger

image capture.

2 seconds is the default setting.

5.3.1 Event

Event settings, including:

- Motion Detection (set 1)

- Motion Detection (set 2)

Either set signal input trigger can be engaged.

5.4 Network Setup

Network Setup can be used to change the network con-

nection settings of the IP WEBCAM. The default value for IP

assignment is “static”. These settings also include:

■ IP Assignment°GStatic,

■ DHCP, or PPPoE

■ PPPoE settings

TOP

When using the “DHCP” setting, you do not need to enter

any of the above settings. You must only enter the address

of the DHCP Server in the “Server” ﬁ eld.

When using the “PPPoE” setting, you must correctly enter

your ID and password. Please refer to unit 5.4.2 for details.

5.4.2 PPPoE

This menu allows you to enter the dial up settings during

PPPoE IP assignment. This usually refers to entering your

ID account name and password. Remember that you must

also enter your ISP settings as well.

How to Setup PPPoE

Step 1: Enter your correct user ID in the “Account” ﬁ eld.

Step 2: Enter your correct password in the “Password” ﬁ eld.

Step 3: Click on “Submit” to complete your settings.

NOTE: Because PPPoE utilizes a dynamic IP address

from an ISP, the IP settings for the MT4009 EZ IP WEB-

CAM could diﬀ er for each use. It is thus suggested that

an IP Router be used to connect to the PPPoE or DDNS.

This will help your computer to ﬁ nd the IP WEBCAM.

5.4.3 HTTP Server

This menu allows you to enter the port number of the

MT4009 IP WEBCAM internal web server

(or HTTP Server) via HTTP protocol. The default port num-

ber is “80”.

5.4.1 IP Assignment

Static IP Assignment refers to the ﬁ xed settings of the ISP

or network engineering department.

IP Address: Includes static, DHCP, PPPoE. DHCP and PPPoE

are typically dynamic IPs.

When using the “static” setting, you must enter the follow-

ing information:

■ IP Address: The IP address of the IP WEBCAM

■ Subnet Mask: Set by default to 255.255.255.0

■ Gateway: Default gateway

■ Http Server port settings

■ DNS settings

* MAC Address: Displays the Mac address of the IP WEBCAM

TOP

5.4.4 DNS Server

This menu allows you to enter the IP address of the DNS

(Domain Name Server ).

By doing this, you can replace the IP address of the IP

WEBCAM with an http name (such as myIP WEBCAM.XXX),

making it easier to remember. The default DNS1 value is

“168.95.1.1” (Hinet). If the connection fails, the system will

automatically attempt to connect to DNS2.

5.5 Server Setup

This menu allows you to enter various server settings, in-

cluding:

- Mail Server - DDNS Server

- FTP Server - NTP Server

5.5.1 Mail Server

This refers to settings pertaining to sending image ﬁ les via

a mail server. You must also make sure that the Mail Image

settings from 5.3 EventTrigger are enabled to e-mail a ﬁ le

to the designated address upon event trigger. This system

supports SMTP servers.

How to use mail server settings:

Step 1: Enter the IP address or http web address of the mail

server in “IP/Host”.

Step 2: Enter the e-mail address of the sender in “Mail

From”.

Step 3: Enter the e-mail address of the recipient in “Receipt

to”.

Step 4: Enter the registered account ID of the mail server

in “Account ID”.

Step 5: Enter the correct mail server password in “Pass-

word”

Step 6: Enter whether or not your mail server requires au-

thorization in “Authorization”

Step 7: Click on Submit when you are ﬁ nished.

5.5.2 FTP Server

This menu allows you to enter the FTP (File Transfer Proto-

col) Server settings. You must also make sure that the FTP

Image settings from 5.3 EventTrigger are enabled to send

a ﬁ le to the designated FTP server via FTP upon event trig-

ger. This system supports Port Mode and Passive Mode.

TOP

How to use FTP Server settings:

Step 1: Enter the IP or HTTP address of the FTP server in

“IP/Host”

Step 2: Enter the designated FTP port number in “Port”

Step 3: Enter the account ID of the FTP server in “Account ID”

Step 4: Enter the FTP server password in “Password”

Step 5: Select whether you wish to use “Port Mode” or “Pas-

sive Mode” transfer protocol.

Step 6: Click on Submit when you are ﬁ nished.

5.5.3 DDNS Server

This menu allows you to enter your DDNS(Dynamic Domain

Name Server) Settings. You can also use a PPPoE (with dy-

namic IP) to connect to the http address of the IP WEBCAM

(such as sqIP WEBCAM.dyndns.org) by entering the regis-

tered HTTP address of the DDNS Server. This is convenient

for viewing IP WEBCAMS with non-ﬁ xed IP addresses.

Entering the DDNS Server Settings:

Step 1: Find a DDNS service (such as http://www.dyndns.

org ), and register a user account, password, and HTTP user

address.

Step 2: Enter the address (IP or HTTP) of the DDNS server.

Enter the host name, account ID, and password in each ap-

propriate ﬁ eld.

Step 3: Enter the account ID of the DDNS server in “Account ID”

Step 4: Enter the DDNS server password in “Password”

Step 5: Select the DDNS server connection status auto-

matic display setting.

Step 6: Click on “Submit” when you are ﬁ nished.

5.5.4 NTP Server

NTP(Network Time Protocol) allows you to calibrate the IP

WEBCAM timing.

Using the NTP Server settings:

Step 1: Enter the NTP Server IP or HTTP address in “IP/Host”

Step 2: Select the correct time zone in the “Time Zone”

Step 3: Click on “Submit” when ﬁ nished.

5.6 Administration Setup

This menu allows you to designate an IP WEBCAM name,

administrator password, and other user passwords. Admin-

istrators may access all IP WEBCAM functions and settings,

while general users may only utilize the LiveView view, and

may not access any of the settings.

TOP

5.6.1 Camera Name

This allows you to set a IP WEBCAM name that will be dis-

played on the video for identiﬁ cation purposes.

5.6.2 General User

This menu allows you to change the account ID and pass-

word for general users.

Using the General User settings:

Step 1: Enter the IP WEBCAM name in the “Account ID”

ﬁ eld.

Step 2: Enter you’re the password you wish to change in

the “Old Password” ﬁ eld.

Step 3: Enter the new password in the “New Password” ﬁ eld.

Step 4: Conﬁ rm the password by entering it once more in

the “Re-type”.

Step 5: Click on “Submit” to ﬁ nish.

5.6.3 Administrator

This menu allows you to change the account ID and pass-

word for administrators.

Using the Administrator Settings:

Step 1: Enter the registered IP WEBCAM name in the “Ac-

count ID” ﬁ eld.

Step 2: Enter you’re the password you wish to change in

the “Old Password” ﬁ eld.

Step 3: Enter the new password in the “New Password” ﬁ eld.

Step 4: Conﬁ rm the password by entering it once more in

the “Re-type”.

Step 5: Click on “Submit” to ﬁ nish.

5.7 Update

This menu allows you to update the IP WEBCAM software

(PV4.0_2.91.1 and up) online. You may use this feature to

update the internal

IP WEBCAM software so that you can make sure you have

the newest version available, as well as ﬁ xes to any soft-

ware glitches.

Using the Update Feature:

Step 1: The IP WEBCAM name is automatically detected

and displayed in the “Camera Name” ﬁ eld.

Step 2: The IP WEBCAM software currently being used is

automatically detected and displayed in the “Current Ver-

sion” ﬁ eld.

Step 3: Enter the name of the software ﬁ le (including direc-

tory) that you wish to update in “New File Name”.

TOP

Step 4: You may also click “browse” to search for the ﬁ le you

wish to update.

Step 5: Click “Submit” when you are ﬁ nished.

Step 6: At this time, the system will begin to upload the ﬁ le.

This should take 7-10 seconds for networks with 100Mbps

connections.

Step 7: The system will automatically begin a 50 second

countdown. If the process is successful, the words “Update

completed! System will auto reset after 3 seconds!” shall

appear.

Step 8: The system will return to the “System Login” screen.

Re-enter your Account ID and Password, and you’re ﬁ n-

ished.

Step 9: You may now check “Current Version” to make sure

that the update was successful.

NOTE: After completing Step 6, please do not discon-

nect the IP WEBCAM, or the unit may become dam-

aged, and require to be taken back to the factory for

repairs.

Appendix

APPENDIX A.

Using a PPPOE dialup connection and DDNS with the

MT4009 EZ IP WEBCAM (Using a hub)

This section is intended to help users connect to a com-

puter to the MT4009 EZ IP WEBCAM via a hub. It shall also

describe how to connect to ADSL with a PPPoE type IP ad-

dress, and also how to connect to the MT4009 EZ IP WEB-

CAM using DDNS. The directions are as described below:

A. Apply for a DDnS account using your home computer.

B. Connect to the MT4009 EZ IP WEBCAM with your home

computer (using the CAM EZ Search Tool).

C. Setup your MT4009 EZ IP WEBCAM to connect via PP-

PoE, and enter your DDNS settings.

D. You may now view your EZ IP WEBCAM with DDNS viewer.

A. Applying for a DDNS Account with Your Home Com-

puter

To do this, you must ﬁ rst have a Cable/ADSL Ethernet

modem (with RJ-45 connectors), and make sure that your

TOP

Step 3: Enter the desired account name (the account name

“mjIP WEBCAM001” is used in this example). Enter your E-

mail address and password application. Click on “Create

Account” to complete the application.

Step 4: If the application is successful, the following shall

appear on your screen.

broadband provider (ISP) is properly connected to the In-

ternet.

Step 1: Turn on your home computer, and connect to the

Internet.

Go to the http://www.dyndns.org/ website.

Step 2: Go to the “Account” Menu, and click on “Create Ac-

count”.

Step 5: After your application has been completed success-

fully, respond by E-mail to conﬁ rm, and go back to http://

www.dyndns.org/ to enter your user name and password.

Step 6: Go to Dynamic DNS from the “Account” menu, and

click on “Add Host”. The following should appear:

Step 7: The “Services” menu should automatically appear.

Choose your Domain Name (gotdns.com has been used in

this example for your reference).

TOP

Step 8: Enter your Host Name (mjIP WEBCAM001 has been

used in this example for your reference). Click on “Add

Host” to ﬁ nish.

Step 9: After the new hostname has successfully created,

the following screen should appear:

B. Connecting to the MT4009 EZ IP WEBCAM with Your

Home Computer (Using the CAM EZ Search Tool)

Step 1: Please connect the MT4009 EZ IP WEBCAM to the

HUB as shown in following chart:

Step 2: Open CAM_EZ Search. Click on “Update” to begin

searching for any MT4009 EZ IP WEBCAM connected to

the local network. The menu should automatically display

the EZ IP WEBCAM under the name “MT4009”. It is recom-

mended that you ﬁ rst change its IP address to 192.168.9.1

(factory default). For gateway, it is recommended that you

use 192.168.9.253. Click “Submit” to update.

TOP

Step 3: Go to My Com-

puter > Control Panel

> Network and Dialup

Connection > Local

Connection > click on

“Properties (P)”.

Step 4: Select “Internet Protocol (TCP/IP)”, and click on the

Properties (R). Click on “Ok”.

Step 5: Change the IP Address to 192.168.9.2. Change Sub-

mask to 255.255.255.0. The default gateway is 192.168.9.254

(Change the IP address to any numbers within the range of

192.168.9.2 - 192.168.9.253). Click on “OK”

Step 6: In EZ Search Tool, click on Update once more to

search for IP WEBCAM on the local network. Double click on

“MT4009” from the list, and your browser will automatically

take you to the MT4009 EZ IP WEBCAM login window.

Please refer to P.8 for information on how to browse the

surveillance video from the MT4009 EZ IP WEBCAM.

Select

TOP

C. Changing the MT4009 EZ IP WEBCAM Settings to PP-

PoE / Using DDNS

Step 1: Select “Network” to open the network menu. Enter

your account ID and password in the appropriate ﬁ eld in

“PPPoE” (in this example, we have used Chung Hwa Tel-

ecom ADSL for your reference). Click on “Submit”.

Step 2: Go to the “Server” menu. Enter the host name, ac-

count ID, and password in the appropriate ﬁ eld in “DDNS

Server”. Click on “Submit” to ﬁ nish.

Step 3: At this time, you must change the IP settings of your

home computer back to their original values (automatical-

ly retrieve IP address). To do this, click on “Network Neigh-

borhood”, right click on the Properties (R). Select your local

connection and right click to view the Properties (R).

TOP

Strona jest ładowana ...

media-tech MT4009 Instrukcja obsługi

Marka: media-tech

Model: MT4009

Kategoria: Bramki / kontrolery

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

IP WEBCAM MT4009

ściągnij PDF

raport

w innych językach

English: media-tech MT4009 User manual

media-tech MT4009 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

media-tech MT4009 Instrukcja obsługi

w innych językach

Inne dokumenty