Yamaha HTR-6230 Instrukcja obsługi

Marka: Yamaha

Model: HTR-6230

Kategoria: Odbiorca

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

HTR-6230

AV Receiver

OWNER’S MANUAL

Caution-i En

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

6 Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to

overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution-ii En

IMPORTANT SAFETY INSTRUCTIONS

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

21 Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety

checks to determine that the product is in proper operating

condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the antenna

or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product MUST

be used. Follow all installation instructions. Failure to

follow instructions could void your FCC authorization to

use this product in the USA.

3 NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15

for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance that

your use of this product in a residential environment will

not result in harmful interference with other electronic

devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions found

in the users manual, may cause interference harmful to the

operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

Caution-iii En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow ventilation space of at least

30 cm on the top, 20 cm on the left and right, and 20 cm on

the back of this unit.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in an environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign objects may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to

this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury. Yamaha

will not be held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

16 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

17 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

18 Before moving this unit, press ASTANDBY/ON to set this

unit in the standby mode, and disconnect the AC power plug

from the wall outlet.

19 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE plugging

into the AC wall outlet. Voltages are:

........................................ AC 110–120/220–240 V, 50/60 Hz

20 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

21 Excessive sound pressure from earphones and headphones can

cause hearing loss.

22 When replacing the batteries, be sure to use batteries of the

same type. Danger of explosion may happen if batteries are

incorrectly replaced.

Caution: Read this before operating your unit.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

As long as this unit is connected to the AC wall outlet,

it is not disconnected from the AC power source even

if you turn off this unit by ASTANDBY/ON. In this

state, this unit is designed to consume a very small

quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la

plus large de la fiche dans la borne correspondante de

la prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à

la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space

below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

1 En

English

INTRODUCTION

ADDITIONAL

INFORMATION

APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Features.................................................................... 2

Supplied accessories .................................................. 2

Functional overview................................................ 3

Front panel ................................................................. 3

Front panel display..................................................... 4

Remote control........................................................... 5

Rear panel .................................................................. 6

Quick start guide..................................................... 7

Preparation of remote control ............................... 8

Connections ............................................................. 9

Placing speakers......................................................... 9

Connecting speakers .................................................. 9

Connecting video components................................. 11

Connecting other components ................................. 13

Using the VIDEO AUX jacks on the front panel .... 15

Connecting the FM and AM antennas ..................... 15

Connecting the power cable..................................... 15

Turning on and off the power .................................. 15

Basic setup ............................................................. 16

Playback................................................................. 17

Basic procedure........................................................ 17

Additional operations............................................... 18

Selecting the SCENE templates ...........................21

Selecting the desired SCENE template.................... 21

Creating your original SCENE templates................ 23

Using remote control on the SCENE feature........... 24

Sound field programs ...........................................25

Selecting sound field programs................................ 25

FM/AM tuning ...................................................... 27

Overview.................................................................. 27

FM/AM tuning operations ....................................... 27

Preset FM/AM stations ............................................ 27

Using iPod™ .......................................................... 29

Control and functions for iPod™............................. 29

Using Bluetooth™ components............................ 30

Pairing the Bluetooth™ receiver and your Bluetooth™

component ........................................................... 30

Playback of the Bluetooth™ component ................. 30

Set menu ................................................................ 31

Using set menu......................................................... 32

1 SOUND MENU .................................................... 32

2 INPUT MENU ...................................................... 34

3 OPTION MENU ................................................... 35

Remote control features ....................................... 37

Controlling this unit, a TV, or other components .... 37

Setting remote control codes.................................... 39

Advanced setup..................................................... 40

Troubleshooting.................................................... 41

Glossary ................................................................. 46

Specifications......................................................... 47

Index ...................................................................... 48

(at the end of this manual)

Contents

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

APPENDIX

List of remote control codes...................................i

About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the

front panel or the ones on the remote control. In case the button

names differ between the front panel and the remote control, the

button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications

are subject to change in part as a result of improvements, etc. In case

of differences between the manual and product, the product has

priority.

• “ASTANDBY/ON” or “fDVD” (example) indicates the name of

the parts on the front panel or the remote control. Refer to the

“Functional overview” on page 3.

2 En

INTRODUCTION

Built-in 5-channel power amplifier

◆ Minimum RMS output power

[U.S.A. and Canada models]

(1 kHz, 0.9% THD, 8 Ω)

Front: 100 W/ch

Center: 100 W

Surround: 100 W/ch

[Other models]

(1 kHz, 0.9% THD, 6 Ω)

Front: 100 W/ch

Center: 100 W

Surround: 100 W/ch

Various input/output connectors

◆ HDMI (IN x 2, OUT x 1), Component video (IN x 3, OUT x

1), Composite video (IN x 3, OUT x 2), Coaxial digital audio

(IN x 1), Optical digital audio (IN x 2), Analog audio (IN x 9,

OUT x 2)

◆ Speaker out (5-channel), Subwoofer out

◆ Discrete multi-channel input (6-channel)

SCENE select function

◆ Preset SCENE templates for various situations

◆ SCENE template customizing capability

Sound field programs

◆ Proprietary Yamaha technology for the creation of surround

field

◆ Compressed Music Enhancer mode

◆ SILENT CINEMA™

Decoders and DSP circuits

◆ Dolby Digital decoder

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ DTS decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA™

Sophisticated FM/AM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

HDMI™ (High-Definition Multimedia Interface)

◆ HDMI interface for standard, enhanced or high-definition

video (includes 1080p video signal transmission)

DOCK terminal

◆ DOCK terminal to connect a Yamaha iPod universal dock

(such as YDS-11, sold separately) or Bluetooth wireless audio

receiver (such as YBA-10, sold separately)

Other features

◆ 192-kHz/24-bit D/A converter

◆ iPod controlling capability

◆ Sleep timer

◆ Cinema and music night listening modes

◆ Remote control with preset remote control codes

Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent No’s:

5,451,942;5,956,674;5,974,380;5,978,762;6,487,535 and

other U.S. and worldwide patents issued and pending.

DTS is a registered trademark and the DTS logos and

iPod™

“iPod” is a trademark of Apple Inc., registered in the U.S.

and other countries.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG

and is used by Yamaha in accordance with a license

agreement.

“HDMI,” the “HDMI” logo and “High-Definition

Multimedia Interface” are trademarks, or registered

trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha

Corporation.

Yamaha and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out

of your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without

annoying blaring or distortion - and, most importantly,

without affecting your sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, Yamaha and the Electronic

Industries Association’s Consumer Electronics Group

recommend you to avoid prolonged exposure from

excessive volume levels.

Check that you received all of the following parts.

❏ Remote control

❏ Batteries (2) (AAA, R03, UM-4)

❏ AM loop antenna

❏ Indoor FM antenna

Features

We Want You Listening For A Lifetime

Supplied accessories

3 En

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

A STANDBY/ON

Turns on this unit, or sets it to standby mode (see page 15).

B PHONES jack

Connect to a pair of headphones (see page 19).

C SPEAKERS

Turns on or off the set of front speakers connected to the

FRONT A or FRONT B speaker terminals (see page 18).

D EDIT PRESET/TUNING

Switches the tuning mode (see page 27).

E A/B/C/D/E

Selects the preset station group (A to E) (see page 28).

F PRESET/TUNING l / h

Tunes into radio stations manually or automatically and selects a

preset station group (see page 27).

G BAND

Selects the reception band from FM and AM (see page 27).

H MEMORY

Stores a station that you tuned into as a preset station (see

page 27).

I TUNING AUTO/MAN’L

Selects a tuning method from automatic or manual tuning (see

page 27).

J SCENE 1/2/3/4

Recalls an input source and a sound field program assigned to

each SCENE button (see page 21).

K TONE CONTROL

Selects “BASS” and “TREBLE” to adjust frequency response

(see page 19).

L PROGRAM l / h

Selects a sound field program (see page 25).

M STRAIGHT

Activates the “STRAIGHT” mode (see page 26).

N INPUT l / h

Selects an input source (see page 17).

O NIGHT

Selects a night listening mode (see page 19).

P VOLUME control

Adjusts the volume level of this unit (see page 17).

Q VIDEO (VIDEO AUX) jack

Connects to a game console or a video camera using a

composite video cable (see page 15).

R AUDIO L/R (VIDEO AUX) jacks

Connects to a game console or a video camera using analog

audio cables (see page 15).

S PORTABLE (VIDEO AUX) jack

Connects to an audio component (such as iPod) (see page 15).

T Front panel display

Shows information about the operational status of this unit (see

page 17).

Functional overview

Front panel

PHONES

SILENT

CINEMA

TONE

CONTROL

PROGRAM

STRAIGHT

INPUT

VIDEO

AUDIO

PORTABLE

VIDEO

AUX

VOLUME

EFFECT

SCENE

STANDBY

/ON

NIGHT

SPEAKERS

PRESET/TUNING

EDIT

A/B/C/D/E

PRESET/TUNING

BAND

MEMORY

TUNING

AUTO/MAN'L

C D G H I

K OL N R

T PE F

J QSBM

4 En

Functional overview

a Decoder indicator

Lights up when any of the decoders of this unit functions.

b ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is

selected (see page 25).

c VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 26).

d SILENT CINEMA indicator

Lights up when headphones are connected and a sound field

program is selected (see page 26).

e DOCK indicator

Lights up or flashes according to the state of Yamaha iPod

universal dock or Bluetooth Wireless Audio Receiver connected

to this unit (see pages 14 and 30).

f Input source indicators

The corresponding cursor lights up to show the currently

selected input source.

g Tuner indicators

Lights up when this unit is in the FM or AM tuning mode (see

page 27).

h MUTE indicator

Flashes while the MUTE function is on (see page 19).

i VOLUME level indicator

Indicates the current volume level.

j PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

k Headphones indicator

Lights up when headphones are connected (see page 19).

l SP A B indicators

Lights up according to the set of front speakers selected (see

page 17).

m NIGHT indicator

Lights up when you select a night listening mode (see page 19).

n CINEMA DSP indicator

Lights up when you select a sound filed program (see page 26).

o Multi-information display

Shows the name of the current sound field program and other

information when adjusting or changing settings.

p SLEEP indicator

Lights up while the sleep timer is on (see page 20).

q Input channel and speaker indicators

• LFE indicator

Lights up when the input signal contains the LFE signal.

• Input channel indicators

Indicates the channel components of the current digital input

signal.

Front panel display

DVR DVD CD

V-AUX DTV/CBL

MD/CD-R

TUNER

ENHANCER

SILENT CINEMA

NIGHT

DOCK

AUTO

PRESET

TUNED

MUTE

VOLUME

MEMORY

SLEEP

VIRTUAL

PCM

A B

LFE

LCR

SL SR

DIGITAL

STEREO

ab c de f ghi

jklmnopq

LFE

LCR

SL SR

LFE indicator

Input channel indicators

5 En

Functional overview

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

a Infrared window

Outputs infrared control signals (see page 8).

b TV/AV POWER

Turns your TV or other components on or off (see page 38).

c STANDBY ( )

Sets this unit to the standby mode (see page 15).

d POWER ( )

Turns this unit on (see page 15).

e MUTE

Mutes audio output (see page 19).

f Input selector buttons

Switches the input source to each source (see page 17).

g TV control buttons

Controls your TV (see page 37).

h AMP

Press this button before you control this unit (see page 17).

i SCENE 1/2/3/4

Recalls an input source and a sound field program assigned to

each SCENE button (see page 21).

j BAND LEVEL TITLE

Selects the speaker that you want to adjust (see page 19).

k MENU

Displays the set menu on the front panel display (see page 32).

l Cursors (l / h / n / k) / ENTER

• Press cursors to navigate the set menu (see page 32).

• Press ENTER to confirm a selection in the set menu (see

page 32).

m VOLUME +/–

Adjusts the volume level of this unit (see page 17).

n RETURN

Returns the previous menu level when the set menu is displayed

(see page 32).

o DISPLAY

Displays the information of external components (such as a

DVD player) (see page 38).

p Control buttons

Control external components (such as a DVD player) connected

to this unit (see page 38).

q PROG l / h

Selects the sound field program (see page 25).

r ENHANCER

Sets the sound field program to the “Music Enh. 2ch” or “Music

Enh. 5ch” (see page 25).

s SUR.DECODE

Selects a decoder from four decoders (see page 26).

t STRAIGHT

Activates the “STRAIGHT” mode (see page 26).

u NIGHT

Selects a night listening mode (see page 19).

v MULTI CH IN

Sets the input source to MULTI CH IN (see page 18).

w AUDIO SEL

Selects an audio input select setting for each input source (see

page 18).

x SLEEP

Sets the sleep timer (see page 20).

y Numeric buttons

Enter remote control codes or preset station number (see

page 39).

Remote control

POWER

MD/CD-R

TUNER

DVD

V-AUX/DOCK

BAND LEVEL

TITLE

RETURN

ENTER

REC

PROG

ENHANCER

SUR.DECODE

STRAIGHT

NIGHT

MULTI CH IN

AUDIO SEL

SLEEP

ENT

DISPLAY

VOLUME

AMP

DTV/CBL

DVR

TV CH

TV VOL

TV INPUT TV MUTE

POWER POWER

MUTE

STANDBY

D E

SCENE

2341

6 En

Functional overview

a DOCK terminal

Connect to the Yamaha iPod Universal Dock (such as YDS-11,

sold separately) or Bluetooth Wireless Audio Receiver (such as

YBA-10, sold separately) using its dedicated cable (see

page 14).

b COMPONENT VIDEO jacks

Connect to Y, PB/CB and PR/CR jacks on your video components

with component video cables (see page 11).

• DVD input jacks

• DTV/CBL input jacks

• DVR input jacks

• MONITOR OUT output jacks

c HDMI terminals

Connect to HDMI output/input terminals on your external

components with HDMI cables (see page 11).

• HDMI DVD terminal

• HDMI DTV/CBL terminal

• HDMI OUT output terminal

d VIDEO jacks

Connect to video jacks on your video components with

composite video cables (see page 11).

• DVD input jack

• DTV/CBL input jack

• DVR IN jack

• DVR OUT jack

• MONITOR OUT jack

e ANTENNA terminals

Connect to the supplied FM and AM antennas (see page 15).

f SPEAKERS terminals

Connect to each speakers (see page 9).

• FRONT A L/R

• FRONT B L/R

• SURROUND L/R

• CENTER

g DIGITAL INPUT jacks

Connect to the DIGITAL output jacks on your digital audio

components with Coaxial/Optical digital audio cables.

This input jacks support PCM, Dolby Digital and DTS bitstream

(see page 11).

• COAXIAL (DVD)

• OPTICAL (DTV/CBL)

• OPTICAL (CD)

h MULTI CH INPUT jacks

Connect to the output jacks on your multi-format player or

external decoder with analog audio cables (see page 14).

• FRONT L/R jack

• SURROUND L/R jack

•CENTER jack

• SUBWOOFER jack

i AUDIO jacks

Connect to the audio output/input jacks on your components

with analog audio cables (see page 11).

• DVD L/R jack

• DTV/CBL L/R jack

• DVR IN L/R jack

• DVR OUT L/R jack

• CD L/R jack

• IN (PLAY) L/R jack

• OUT (REC) L/R jack

j SUBWOOFER OUTPUT jack

Connect to a Subwoofer with an analog audio cable (see

page 9).

k Power cable

Connect to a standard AC outlet (see page 15).

Rear panel

DOCK

DIGITAL INPUT

COMPONENT VIDEO

VIDEO

AUDIO

MULTI CH INPUT

HDMI

ANTENNA

SPEAKERS

DVD

OPTICAL

DVD

SURROUND

CENTER

FRONT B

FRONT A

DVR

SURROUND

FRONT

CENTER

SUBWOOFER

DTV/CBL

DVD

DVR

GND

OUT

DTV/CBL

DVD

DVR

OUTPUT

SUB

WOOFR

OUT

MD/

CD-R

(PLAY)

OUT

(REC)

DTV/CBL

MONITOR

OUT

MONITOR

OUT

DVD

COAXIAL

DTV/

CBL

OUT

UNBAL.

g h i j

e fc db

7 En

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

The following steps describe the easiest way to operate this unit. See the related pages for details on the operation and

settings.

In these steps, you need the following items which are not

included in the package of this unit.

❏ Speakers

We recommend magnetically shielded speakers.

❏ Front speaker ..................................... x 2

At least two front speakers are required to start

playback.

❏ Center speaker ................................... x 1

❏ Surround speaker .............................. x 2

❏ Active subwoofer ................................... x 1

Select an active subwoofer equipped with an RCA

input jack.

❏ Speaker cable ......................................... x 5

❏ Subwoofer cable ..................................... x 1

Select a monaural RCA cable.

❏ DVD player .............................................. x 1

Select DVD player equipped with coaxial digital

audio output jack and composite video output jack.

❏ Video monitor ......................................... x 1

Select a TV monitor, video monitor or projector

equipped with a composite video input jack.

❏ Video cable ............................................. x 2

Select an RCA composite video cable.

❏ Digital coaxial audio cable .................... x 1

Place your speakers in the room and connect them to this

unit.

Connect your TV, DVD player or other components.

Connect the power cable and turn on this unit.

Select the component connected in the step 3 as an input

source and start playback.

Quick start guide

Step 1: Check the items

Step 2: Set up your speakers

• Placing speakers ☞P. 9

• Connecting speakers ☞P. 9

Video monitor

Front left

speaker

Center speaker

DVD player

Surround left

speaker

Surround right

speaker

Subwoofer

Front right

speaker

Step 3: Connect your components

• Connecting a TV monitor or projector ☞P. 1 2

• Connecting audio and video components ☞P. 1 3

• Connecting a multi-format player or an external

decoder ☞P. 1 4

• Connecting a Yamaha iPod universal dock or

Bluetooth Wireless Audio Receiver ☞P. 1 4

• Using the VIDEO AUX jacks on the front panel

☞P. 1 5

• Connecting the FM and AM antennas ☞P. 1 5

Step 4: Turn on the power

• Connecting the power cable ☞P. 1 5

• Turning on and off the power ☞P. 1 5

Step 5: Select the input source and start

playback

• Basic procedure ☞P. 1 7

• Selecting the SCENE templates ☞P. 2 1

• Adjusting the sound field programs ☞P. 25

8 En

PREPARATION

1 Take off the battery compartment cover.

2 Insert the four supplied batteries (AAA, R03,

UM-4) according to the polarity markings (+

and –) on the inside of the battery

compartment.

3 Snap the battery compartment cover back

into place.

Notes

• Change all of the batteries if you notice the following conditions:

– the operation range of the remote control decreases.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose of

them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2 minutes,

or if exhausted batteries remain in the remote control, the contents

of the memory may be cleared. When the memory is cleared, insert

new batteries and set up the remote control code.

The remote control transmits a directional infrared ray.

Be sure to aim the remote control directly at the remote

control sensor on this unit during operation.

a Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

• To set the remote control codes for other components, see page 39.

Notes

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types of

conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or stove

– places of extremely low temperatures

– dusty places

• To set the remote control codes for other components, see page 39.

Preparation of remote control

Installing batteries in the remote control

Using the remote control

30º 30º

Approximately 6 m (20 ft)

9 En

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

The speaker layout below shows the speaker setting we

recommend. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

Front left and right speakers (FL and FR)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers at an equal distance

from the ideal listening position. The distance of each

speaker from each side of the video monitor should be the

same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system.

Surround left and right speakers (SL and SR)

The surround speakers are used for effect and surround

sounds.

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as

the Yamaha Active Servo Processing Subwoofer System,

is effective not only for reinforcing bass frequencies from

any or all channels, but also for high fidelity sound

reproduction of the LFE (low-frequency effect) channel

included in Dolby Digital and DTS sources. The position

of the subwoofer is not so critical, because low bass

sounds are not highly directional. But it is better to place

the subwoofer near the front speakers. Turn it slightly

toward the center of the room to reduce wall reflections.

Be sure to connect the left channel (L), right channel (R),

“+” (red) and “–” (black) properly. If the connections are

faulty, this unit cannot reproduce the input sources

accurately.

■ 5.1-channel speaker connection

Connections

Placing speakers

60˚

30˚

80˚

Connecting speakers

Caution

• Use speakers with the specified impedance shown on

the rear panel of this unit.

• Before connecting the speakers, make sure that this

the AC power plug is disconnected from the AC wall

outlet.

• Do not let the bare speakers wires touch each other or

do not let them touch any metal part of this unit. This

could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of

speaker still creates interference with the monitor,

place the speakers away from the monitor.

• If you are to use 6-ohm speakers, be sure to set “SP

IMP.” to “6ΩMIN” before using this unit. See

page 40 for details on setting “SP IMP.”

LRLR

HDMI

VIDEO

AUDIO OUTPUT

ANTENNA

SPEAKERS

DTV/CBL

SURROUND CENTER FRONT B

FRONT A

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

(PLAY)

DVR

L DVR CD

OUT

GND

UNBAL.

a b

10 En

Connections

* You can select the front speaker set from Front speakers (A) and Front

speakers (B) by pressing CSPEAKERS repeatedly. See page 18 for

details.

■ Connect speaker cables to each speaker

Cables are colored or shaped differently, perhaps with a

stripe, groove or ridge. Connect the striped (grooved, etc.)

cable to the “+” (red) terminals of your speaker. Connect

the plain cable to the “–” (black) terminals.

■ Before connecting to the SPEAKERS

terminal

A speaker cord is actually a pair of insulated cables

running side by side. Cables are colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals of this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable and then

twist the bare wires of the cable together to

prevent short circuits.

■ Connecting to the FRONT A terminals

1 Loosen the knob.

2 Insert the bare end of the speaker wire into

the slit on the terminal.

3 Tighten the knob to secure the wire.

Connecting the banana plug (except Europe,

Russia, Korea, and Asia models)

The banana plug is a single-pole electrical connector

widely used to terminate speaker cables. First, tighten the

knob and then insert the banana plug connector into the

end of the corresponding terminal.

■ Connecting to the FRONT B, CENTER, and

SURROUND terminals

1 Press down the tab.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Release the tab to secure the wire.

Speakers Jacks on this unit

a Front speaker (A) Right* FRONT A (R)

b Front speaker (A) Left* FRONT A (L)

c Surround speaker Right SURROUND (R)

d Surround speaker Left SURROUND (L)

e Center speaker CENTER

f Front speaker (B) Right* FRONT B (R)

g Front speaker (B) Left* FRONT B (L)

h Subwoofer SUBWOOFER

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

Red: positive (+)

Black: negative (–)

11 En

Connections

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Audio jacks and cable plugs

AUDIO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

COAXIAL jack

For digital audio signals transmitted via coaxial digital

audio cable.

OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

Notes

• You can use the digital jacks to input PCM, Dolby Digital, and DTS

bitstreams. All digital input jacks are compatible with digital signals with

up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently. Thus audio

signals input at the digital jacks are not output at the analog AUDIO OUT

(REC) jack.

Video jacks and cable plugs

VIDEO jacks

For conventional composite video signals transmitted via

composite video cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y)

and chrominance (P

B, PR) video signals transmitted on

separate wires of component video cables.

You can play back pictures by connecting your video

monitor and video source component to this unit using

HDMI connections.

At that time, audio/video signals output from the

connected component (such as DVD player etc.) are

output to the connected video monitor only when this unit

is turned on and set to the input source (DVD or DTV/

CBL).

Furthermore, available audio/video signals depend on the

specification of the connected video monitor. Refer to the

instruction manual of each connected component.

■ HDMI jack and cable plug

• We recommend using an HDMI cable shorter than 5 meters (16 feet)

with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect this unit

to other DVI components.

You can record the audio signal output at the AUDIO

OUT (REC) jack by using the recording components.

Note

• Check the copyright laws in your country to record from CDs, radio, etc.

Recording of copyrighted material may infringe copyright laws.

Connecting video components

Information on jacks and cable plugs

COAXIAL

DIGITAL AUDIO

AUDIO

OPTICAL

DIGITAL AUDIO

(White) (Red) (Orange)

Left and right

analog audio

cable plugs

Coaxial

digital audio

cable plug

Optical

digital

audio cable

plug

VIDEO

COMPONENT VIDEO

Y P

(Yellow) (Blue) (Red)(Green)

Composite

video cable

plug

Component

video cable

plugs

Information on HDMI™

Audio signals input at the HDMI jack are not output

from any speaker terminals but output from the

connected video monitor. To enjoy the sound from

speakers connected to this unit,

– make an analog or digital connection besides the

HDMI connection (see page 13).

– mute the volume of the connected video monitor.

Using the AUDIO OUT REC jack

COMPONENT

VIDEO

Video signal flow for MONITOR OUT

Input

Output

(MONITOR OUT)

HDMI

HDMI cable plug

12 En

Connections

Note

• If you turn off the video monitor connected to the HDMI OUT jack via a DVI connection, the connection may fail. In this case, the HDMI indicator

flashes irregularly.

Connecting a TV monitor or projector

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

DOCK

VIDEO

MULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

DVD

COAXIAL

OPTICAL

DTV/CBL

DTV/

CBL

SURROUND C

MONITOR

OUT

SUB

WOOFER

DVR

FRONT CENTER

SUBWOOFER

SURROUND

OUT

GND

UNBAL.

HDMI

DVDOUT DTV/CBL

COMPONENT VIDEO

DVD DTV/CBL DVR

MONITOR

OUT

MD/

CD-R

OUT

(REC)

(PLAY)

AUDIO

DVD DTV/CBL DVR CD

OUT

(or projector)

Component

video in

Video

Audio

out

HDMI

Recommended connections Alternative connections

13 En

Connections

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

This unit has three types of audio jacks, two types of video jacks and HDMI jacks. You can choose the connection

method depending on the component to be connected.

■ Connecting example (connecting a DVD player)

■ Jacks used for audio and video connections

Recommended connections are indicated by (*). When connecting a recording component, you need to make additional

connections for recording (signal transmission from this unit to the recording component).

• You can also use the VIDEO AUX jacks (see page 15) on the front panel

to connect an additional component.

• To confirm the positions of “jacks on this unit” in the following table,

refer to “Rear panel” in “Functional overview” on page 6.

Connecting other components

Connecting audio and video components

DOCK

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

OUT

MONITOR

OUT

GND

UNBAL.

Component out

Audio out

Video out

Coaxial out

HDMI out

Recommended connections Alternative connections

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

Component Signal type Jacks on component Jacks on this unit

DVD player or Blu-ray

Disc

Video HDMI out* HDMI (DVD)*

Component out COMPONENT VIDEO (DVD)

Video out (composite) VIDEO (DVD)

Audio Optical out* COAXIAL (DVD)*

Audio out (analog) AUDIO (DVD)

Set-top box Video HDMI out* HDMI (DTV/CBL)*

Component out COMPONENT VIDEO (DTV/CBL)

Video out (composite) VIDEO (DTV/CBL)

Audio Optical out* OPTICAL (DTV/CBL)*

Analog out (analog) AUDIO (DTV/CBL)

14 En

Connections

Notes

• Be sure to make the same type of video connections as those made for your TV if the video conversion is disabled. For example, if you connected your

TV to the VIDEO MONITOR OUT jack of this unit, connect other components to the VIDEO jacks.

• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

• To make a digital connection to a component other than the default one assigned to each DIGITAL INPUT or DIGITAL OUTPUT jack, configure the

“INPUT ASSIGN” setting (see page 34).

• Only analog audio signals output at AUDIO OUT (REC) jack can be recorded using the recording components. Therefore Digital signals input at the

DIGITAL INPUT jacks or analog signals input at MULTI CH INPUT jacks can be output at the analog AUDIO OUT (REC) jack for recording.

This unit is equipped with 6 additional input jacks

(FRONT L/R, SURROUND L/R, CENTER and

SUBWOOFER) for discrete multi-channel input from a

multi-format player, external decoder or sound processor.

Connect the output jacks on your multi-format player or

external decoder to the MULTI CH INPUT jacks. Be sure

to match the left and right output jacks to the left and right

input jacks for the front and surround channels.

Notes

• When you select the component connected to the MULTI CH INPUT

jacks as the input source (see page 34), this unit automatically turns off

the digital sound field processor, and you cannot select sound field

programs.

• This unit does not redirect signals input at the MULTI CH INPUT jacks

to accommodate for missing speakers. We recommend that you connect a

5.1-channel speaker system before using this feature.

• The source connected to the MULTI CH INPUT jacks on this unit cannot

be recorded.

This unit is equipped with the DOCK terminal on the rear

panel that allows you to connect a Yamaha iPod universal

dock (such as YDS-11, sold separately) or Bluetooth

Wireless Audio Receiver (such as YBA-10, sold

separately).

DVD recorder Video HDMI out* HDMI (DVR)*

Video out (composite) VIDEO (DVR IN)

Audio Audio out (analog)* AUDIO (IN (PLAY))*

Audio recording Audio in (analog)* AUDIO (OUT (REC))*

Video recording Video in (composite)* VIDEO (DVR OUT)*

CD player Audio Coaxial out* OPTICAL (CD)*

Audio Audio out (analog) AUDIO (CD)

MD or CD recorder Audio Audio out (analog)* AUDIO (IN (PLAY))*

Audio recording Audio in (analog)* AUDIO (OUT (REC))*

Component Signal type Jacks on component Jacks on this unit

Connecting a multi-format player or an

external decoder

MULTI CH INPUT

DVD

COAXIAL

DTV/

CBL

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DV

Front out

Surround out

Subwoofer out

Center out

Multi-format player or

external decoder

Connecting a Yamaha iPod universal dock

or Bluetooth Wireless Audio Receiver

DOCK

DIGITAL INPUT

OPTICAL

COAXIAL

DTV/

CBL

DVD

Yamaha iPod universal dock

or Bluetooth Wireless Audio Receiver

15 En

Connections

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Use the VIDEO AUX jacks on the front panel to connect a

game console or a video camera to this unit. To reproduce

the source signals input at these jacks, select “V-AUX” as

the input source.

Notes

• The audio signals input at the DOCK terminal on the rear panel take

priority over the ones input at the VIDEO AUX jacks.

• The audio signals input at the PORTABLE mini jack take priority over

the ones input at the AUDIO L/R jacks.

Both FM and AM indoor antennas are supplied with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

Notes

• The AM loop antenna should be placed away from this unit.

• A properly installed outdoor antenna provides clearer reception than an

indoor one. If you experience poor reception quality, install an outdoor

antenna. Consult the nearest authorized Yamaha dealer or service center

about outdoor antennas.

• The AM loop antenna should always be connected, even if an outdoor

AM antenna is connected to this unit.

Connecting the wire of the AM loop antenna

Assembling the supplied AM loop antenna

Note

• The types of the supplied AM loop antenna is different depending on the

models.

Once all connections are complete, plug the power cable

into the AC wall outlet.

Press ASTANDBY/ON (or dPOWER) to turn on

this unit.

• When you turn on this unit, there will be a 4 to 5-second delay before this

unit can reproduce sound.

Press ASTANDBY/ON (or cSTANDBY) to turn

off this unit.

Note

• In the standby mode, this unit consumes a small amount of power in

order to receive infrared signals from the remote control.

Using the VIDEO AUX jacks on the

front panel

Caution

Be sure to turn down the volume of this unit and other

components before making connections.

Connecting the FM and AM antennas

ANTENNA

SURR

AUDIO OUT

DVR

OUT

DVR

GND

UNBAL.

N OUT

MONITOR

OUT

MD/

CD-R

OUT

(REC)

(PLAY)

Outdoor AM antenna

Use a 5 to 10 m (16 to 32 ft)

of vinyl-covered wire

extended outdoors from a

window.

AM loop

antenna

(supplied)

Indoor FM

antenna

(supplied)

Ground

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good earth

ground is a metal stake driven into moist earth.

Connecting the power cable

Turning on and off the power

Turning on this unit

Set this unit to the standby mode

Open the

lever

Insert Close the

lever

Power cable

To the AC wall outlet

16 En

The “BASIC SETUP” feature is a useful way to set up

your system quickly and with minimal effort.

Notes

• Make sure that you disconnect your headphones from this unit.

• If you wish to configure this unit manually using more precise

adjustments, use the detailed parameters in “SOUND MENU” (see

page 32).

• Altering any parameters in “BASIC SETUP” resets all parameters

manually adjusted in “SOUND MENU” (see page 32).

• Initial settings are indicated by (*) in the following each parameters.

• Press nRETURN on the remote control to return to the previous menu

level.

1 Press hAMP on the remote control.

2 Press kMENU.

“BASIC SETUP” appears on the front panel display.

3 Press lENTER to enter “BASIC SETUP.”

“ROOM: S M L” appears on the front panel display.

4 Press ll / h to select the desired setting.

Select the size of the room where you have installed

your speakers. The room sizes are defined as follows:

5 Press ln to select “SUBWOOFER” and then

ll / h to select the desired setting.

“SUBWOOFER” and the current setting appear on

the front panel display.

6 Press ln to select “SPEAKERS” and then

ll / h to select the number of speakers

connected to this unit.

“SPEAKERS” and the current setting appear on the

front panel display.

7 Press ln to select “SET” and then ll / h

to select the desired settings.

“SET” and “CANCEL” appear on the front panel

display.

• You can also press kMENU to cancel the setup procedure.

8 Press lENTER to confirm your selection.

If you selected “SET” in step 7, each speaker outputs

a test tone twice in turn. “CHECK:TestTone” appears

on the front panel display for a few seconds and then

“CHECK OK?” appears on the front panel display.

• Check the speaker connections (see page 9) and adjust the

“SPEAKERS” settings back in step 6, if necessary.

• The indicator of the speaker currently outputting the test tone

flashes on the front panel display.

9 Press ll / h to select the desired settings.

10 Press lENTER to confirm your selection.

• If you selected “YES” in step 9, the setup

procedure is completed and then display returns to

the top set menu display. Press kMENU to exit

from “BASIC SETUP.”

• If you selected “NO” in step 9, the front speaker

level adjustment display appears on the front panel

display.

11 Press lk / n to select a speaker and then

ll / h to adjust the balance.

The selected speaker and the front left speaker (or the

surround left speaker) output a test tone in turn.

• Press lh to increase the value.

• Press ll to decrease the value.

■ The balance between speakers you can

adjust in each item is defined as follows.

Note

• The available speaker channels differ depending on the setting of the

speakers.

12 Press kMENU to exit from “BASIC SETUP.”

Basic setup

Choice Approximate Size of the room

S 16 x 13 ft, 200 ft

(4.8 x 4.0 m, 20 m

)

M* 20 x 16 ft, 300 ft

(6.3 x 5.0 m, 30 m

)

L 26 x 19 ft, 450 ft

(7.9 x 5.8 m, 45 m

)

Choice Condition

YES* When you have a subwoofer in your system.

NONE When you do not have a subwoofer in your

system.

Choice Display Speakers

2spk Front L/R

3spk Front L/R Center

4spk Front L/R, Surround L/R

5spk* Front L/R, Center, Surround L/R

LCR

SL SR

LCR

SL SR

Choice Function

SET Applies the settings you made.

CANCEL* Cancels the setup procedure without making

any changes.

Choice Function

YES* Completes the setup procedure if the test tone

levels from each speaker were satisfactory.

NO Proceeds to the speaker level adjustment menu

to balance the output level of each speaker.

Choice Adjusted balance between speakers

FR the front left and right speakers

C the front left and center speakers

SL the front left and surround left speakers

SR the surround left and surround right speakers

SWFR the front left speaker and the subwoofer

Strona jest ładowana ...

Yamaha HTR-6230 Instrukcja obsługi

Marka: Yamaha

Model: HTR-6230

Kategoria: Odbiorca

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

ściągnij PDF

raport

w innych językach

čeština: Yamaha HTR-6230 Návod k obsluze
español: Yamaha HTR-6230 El manual del propietario
italiano: Yamaha HTR-6230 Manuale del proprietario
Deutsch: Yamaha HTR-6230 Bedienungsanleitung
svenska: Yamaha HTR-6230 Bruksanvisning
português: Yamaha HTR-6230 Manual do proprietário
français: Yamaha HTR-6230 Le manuel du propriétaire
Türkçe: Yamaha HTR-6230 El kitabı
English: Yamaha HTR-6230 Owner's manual
dansk: Yamaha HTR-6230 Brugervejledning
русский: Yamaha HTR-6230 Инструкция по применению
suomi: Yamaha HTR-6230 Omistajan opas
Nederlands: Yamaha HTR-6230 de handleiding
română: Yamaha HTR-6230 Manualul proprietarului

Yamaha HTR-6230 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha HTR-6230 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty