FLASH F7100501 Instrukcja obsługi
- Kategoria
- Stroboskopy
- Typ
- Instrukcja obsługi
User Manual
Instrukcja Obsługi
F7100501
MOVING HEAD
LED 150W SPOT
Please keep this User Manual for future
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
only, but always by taking its base.
WARNING! The LMH 150W Spot has a powerful pan motor. The torque reaction when the
a surface. Do not apply power to the LMH 150W Spot unless the baase is securely fastened to
a surface or to rigging hardware.
WARNING!
Lock each clamp with both 1/4-turn fasteners. Fasteners are locked only when turned a full
90 clockwise.
WARNING!
with the yoke hanging vertically downwards, use two clamps of half-coupler type. Do not
use any type of clamp that does not completely encircle the structure when fastened.
WARNING!
or any other strong light source from any angle - even for a few seconds. See Figure 2. The
LMH 150W Spot lens can focused the sun's rays, creating a potential fire hazard and causing
damage.
IMPORTANT!LMH 150W Spot,
as intense illumination can damaged the display.
the device is from 18°C to 40°C. Operating
temperature of the device from 18°C to
50°C.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
rain or moisture.
visibly damaged.
Do not look directly at the LED light spot
2. SAFETY INFORMATION
1. INTRODUCTION
LED MOVING HEAD 150W SPOT
WARNING!
User Manual •Instrukcja Obsługi
Figure 2.
LED MOVING HEAD 150W SPOT • Art No F7100501
the rainbow
holes on the bracket. Always ensure that
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
5.1 Connecting DMX signal
4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
frequency.
16 and DMX channel mode.
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
of people and has no one pass by or under
it.
1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!
DMX signal has to be terminated with a
DMX
Controller DMX 512 DMX 512
The connection is performed using
power cable with PowerCon connector
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100~240V 200W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
User Manual •Instrukcja Obsługi
CH Function Value Description
1Dimmer 0-255 From dark to bright
2Strobe 0-10 No Strobe
11-255 From Slow to Fast
3Pan 0-255 Pan
4Pan ne 0-255 Pan 16 bit
5Tilt 0-255 Tilt
6Tilt ne 0-255 Tilt 16 bit
7Speed 0-255 Fast - Slow
8Color
0-4 White
5-9 White + Color 1
10-14 Color 1
15-19 Color 1 + Color 2
20-24 Color 2
25-29 Color 2 + Color 3
30-34 Color 3
35-39 Color 3 + Color 4
40-44 Color 4
45-49 Color 4 + Color 5
50-54 Color 5
55-59 Color 5 + Color 6
60-64 Color 6
65-69 Color 6 + Color 7
70-74 Color 7
75-79 Color 7 + Color 8
80-84 Color 8
85-89 Color 8 + Color 9
90-169 Color fast to slow in clockwise
170-174 Stop
175-255 Color slow to fast in anticlockwise
6. DMX CHANNELS
16 CH Mode
LED MOVING HEAD 150W SPOT • Art No F7100501
CH Function Value Description
9Fixed gobo wheel
0-9 Open White
10-19 Gobo 1
20-29 Gobo 2
30-39 Gobo 3
40-49 Gobo 4
50-59 Gobo 5
60-69 Gobo 6
70-79 Gobo 7
80-89 White shaking
90-99 Gobo 1 shaking
100-109 Gobo 2 shaking
110-119 Gobo 3 shaking
120-129 Gobo 4 shaking
130-139 Gobo 5 shaking
140-149 Gobo 6 shaking
150-159 Gobo 7 shaking
160-204 Fast to slow in clockwise
205-209 stop
210-255 Slow to fast in anti clockwise
10 Rotating Gobo
wheel
0-9 Open white
10-19 Gobo 1
20-29 Gobo 2
30-39 Gobo 3
40-49 Gobo 4
50-59 Gobo 5
60-69 Gobo 6
70-79 Gobo 7
80-89 White shaking
90-99 Rotating Gobo 1 shaking
100-109 Rotating Gobo 2 shaking
User Manual •Instrukcja Obsługi
CH Function Value Description
110-119 Rotating Gobo 3 shaking
120-129 Rotating Gobo 4 shaking
130-139 Rotating Gobo 5 shaking
140-149 Rotating Gobo 6 shaking
150-159 Rotating Gobo 7 shaking
160-204 Fast to slow in clockwise
205-209 STOP
210-255 Slow to fast in anti clockwise
11 Gobo wheel
rotating
0-127 Gobo angle
128-190 Fast to Slow
191-192 STOP
193-255 Slow to Fast in anti clockwise
12 Zoom 0-255 Zoom
13 Prism and Frost
0-49 Invalid
50-99 Prism 1
100-149 Prism 2
150-255 Frost
14 Prism rotating
0-127 Prism angle
128-190 Fast to slow in clockwise
191-192 STOP
193-255 Slow to fast in anti clockwise
15 Macro
0-255 Brightness from dark to bright
0-5 Invalid
6-55 Demo 1
56-105 Demo 2
106-155 Demo 3
156-205 Demo 4
206-255 Random
16 Reset 0-25 No
26-76 Small motor Reset
LED MOVING HEAD 150W SPOT • Art No F7100501
CH Function Value Description
77-127 XY Reset
128-255 Whole RESET
20 CH Mode
User Manual •Instrukcja Obsługi
OSTRZEŻENIE!
UWAGA!
UWAGA!
UWAGA!
Quick Half
Coupler - (Hak)
UWAGA!
przez kilka sekund. Patrz rysunek 2
WAŻNE!
Rysunek 2.
LED MOVING HEAD 150W SPOT • Art No F7100501
2. ZASADY BEZPIECZENSTWA
1. WPROWADZENIE
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
LED MOVING HEAD 150W SPOT
przez wykwalifikowany personel, aby
U w a g a ! Temperatura
przechowywania urządzenia wynosi
od 18°C do 40°C. Temperatura pracy
urządzenia wynosi od 18°C do 50°C.
w dobrze wentylowanym pomieszczeniu,
uszkodzenia spowodowane niestabilnym
-
User Manual •Instrukcja Obsługi
5.2 Specyfikacja zasilania
Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
100~240V 300W 50/60Hz
5. POLACZENIA
1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
UWAGA!
wykwalifikowany personel techniczny.
DMX
Controller DMX 512 DMX 512
LED MOVING HEAD 150W SPOT • Art No F7100501
6. LISTA KANALOW DMX
16 CH Mode
CH Function Value Description
1Dimmer 0-255 From dark to bright
2Strobe 0-10 No Strobe
11-255 From Slow to Fast
3Pan 0-255 Pan
4Pan ne 0-255 Pan 16 bit
5Tilt 0-255 Tilt
6Tilt ne 0-255 Tilt 16 bit
7Speed 0-255 Fast - Slow
8Color
0-4 White
5-9 White + Color 1
10-14 Color 1
15-19 Color 1 + Color 2
20-24 Color 2
25-29 Color 2 + Color 3
30-34 Color 3
35-39 Color 3 + Color 4
40-44 Color 4
45-49 Color 4 + Color 5
50-54 Color 5
55-59 Color 5 + Color 6
60-64 Color 6
65-69 Color 6 + Color 7
70-74 Color 7
75-79 Color 7 + Color 8
80-84 Color 8
85-89 Color 8 + Color 9
90-169 Color fast to slow in clockwise
170-174 Stop
175-255 Color slow to fast in anticlockwise
User Manual •Instrukcja Obsługi
CH Function Value Description
9Fixed gobo wheel
0-9 Open White
10-19 Gobo 1
20-29 Gobo 2
30-39 Gobo 3
40-49 Gobo 4
50-59 Gobo 5
60-69 Gobo 6
70-79 Gobo 7
80-89 White shaking
90-99 Gobo 1 shaking
100-109 Gobo 2 shaking
110-119 Gobo 3 shaking
120-129 Gobo 4 shaking
130-139 Gobo 5 shaking
140-149 Gobo 6 shaking
150-159 Gobo 7 shaking
160-204 Fast to slow in clockwise
205-209 stop
210-255 Slow to fast in anti clockwise
10 Rotating Gobo
wheel
0-9 Open white
10-19 Gobo 1
20-29 Gobo 2
30-39 Gobo 3
40-49 Gobo 4
50-59 Gobo 5
60-69 Gobo 6
70-79 Gobo 7
80-89 White shaking
90-99 Rotating Gobo 1 shaking
100-109 Rotating Gobo 2 shaking
LED MOVING HEAD 150W SPOT • Art No F7100501
CH Function Value Description
110-119 Rotating Gobo 3 shaking
120-129 Rotating Gobo 4 shaking
130-139 Rotating Gobo 5 shaking
140-149 Rotating Gobo 6 shaking
150-159 Rotating Gobo 7 shaking
160-204 Fast to slow in clockwise
205-209 STOP
210-255 Slow to fast in anti clockwise
11 Gobo wheel
rotating
0-127 Gobo angle
128-190 Fast to Slow
191-192 STOP
193-255 Slow to Fast in anti clockwise
12 Zoom 0-255 Zoom
13 Prism and Frost
0-49 Invalid
50-99 Prism 1
100-149 Prism 2
150-255 Frost
14 Prism rotating
0-127 Prism angle
128-190 Fast to slow in clockwise
191-192 STOP
193-255 Slow to fast in anti clockwise
15 Macro
0-255 Brightness from dark to bright
0-5 Invalid
6-55 Demo 1
56-105 Demo 2
106-155 Demo 3
156-205 Demo 4
206-255 Random
16 Reset 0-25 No
26-76 Small motor Reset
www.flash-butrym.pl
F7100501
CH Function Value Description
77-127 XY Reset
128-255 Whole RESET
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
FLASH F7100501 Instrukcja obsługi
- Kategoria
- Stroboskopy
- Typ
- Instrukcja obsługi
w innych językach
- English: FLASH F7100501 User manual