Sony XR-3753 Instrukcja obsługi

Kategoria
Radioodbiorniki samochodowe
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

1997 by Sony Corporation
FM/MW/LW
Cassette Car
Stereo
H
BG
PL
EN
RF
Operating Instructions
Instrukcja obłsugi
Инструкция за експлоатация
Használati Útmutató
Инструкция по эксплуатации
XR-C353
XR-3753
For installation and connections, see the supplied installation/connections
manual.
Informacji o instalacji i podłączeniu należy szukać w załączonej instrukcji
instalacji/podłączania.
За инсталиране и свързване на апарата, използувайте приложения
наръчник.
A készülék üzembehelyezéséről s csatlakoztatásáról részletes tájékoztatást talál
az Üzembehelyezési/csatlakoztatási útmutatóban.
Перед установкой и подключениями обратитесь к прилагаемой инструкции
по установке и подключению.
2
EN
Welcome!
Thank you for purchasing the Sony Cassette
Car Stereo. This unit lets you enjoy a variety of
features by using a rotary remote.
In addition to the tape playback and the radio
operation you can expand your system by
connecting an optional CD/MD changer
(XR-C353 only).
3
EN
With Optional Equipment
CD/MD Changer (XR-C353 only)
Playing a CD/MD ............................................. 10
Scanning the tracks
— Intro scan.................................................. 11
Playing tracks repeatedly
— Repeat play .............................................. 11
Playing tracks in random order
— Shuffle play .............................................. 11
Additional Information
Precautions ......................................................... 12
Maintenance....................................................... 13
Dismounting the unit ....................................... 13
Location of controls .......................................... 14
Specifications ..................................................... 15
Troubleshooting guide ..................................... 16
Index ................................................................... 18
Table of contents
This Unit Only
Getting Started
Resetting the unit ................................................ 4
Detaching the front panel .................................. 4
Preparing the rotary remote .............................. 4
Setting the clock .................................................. 5
Cassette Player
Listening to a tape............................................... 5
Playing a tape in various modes....................... 6
Radio
Memorising stations automatically
— Best Tuning Memory (BTM) ................... 7
Memorising only the desired stations.............. 7
Receiving the memorised stations.................... 7
Other Functions
Using the rotary remote ..................................... 8
Adjusting the sound characteristics ................. 9
Muting the sound................................................ 9
Changing the sound and beep tone ................. 9
4
EN
Attaching the front panel
Attach part A of the front panel to part B of
the unit as illustrated and push until it clicks.
Notes
Make sure the front panel is the right way up when
attaching it to the unit as it cannot be attached upside
down.
Do not press the front panel hard against the unit when
attaching it to the unit. It can easily be attached by
pressing it lightly against the unit.
When you carry the front panel with you, put it in the
supplied front panel case.
Do not press hard or give excessive pressure to the
display windows of the front panel.
Do not expose the front panel to direct sunlight, heat
sources such as hot air ducts or leave it in a humid place.
Never leave it on the dashboard etc. of a car parked in
direct sunlight where there may be a considerable rise in
temperature inside the car.
Caution alarm
If you turn the ignition key to the OFF position
without removing the front panel, the caution
alarm will beep for a few seconds (only when
the POWER SELECT switch is set to the A
position). If you connect an optional power
amplifier and do not use the built-in amplifier,
the beep tone will be disabled.
Preparing the rotary
remote
When you mount the rotary remote, attach the
label in the illustration below.
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ballpoint pen.
Note
Pressing the reset button will erase all the memorised
programme and memory functions.
Detaching the front panel
The front panel of this unit can be detached to
prevent the unit from being stolen.
1 Press (OFF).
2 Press (RELEASE) to open up the front
panel, and detach the panel by pulling it
towards you.
Notes
Be sure not to drop the panel when detaching it from the
unit.
If you press (RELEASE) to detach the panel while the
unit is still turned on, the power will automatically turn
off to protect the speakers from being damaged.
B
A
Reset button
(RELEASE)
SEL
DSPL
MODE
SEL
DSPL
MODE
5
EN
Setting the clock
The clock has a 24-hour digital indication.
For example, setting it to 10:08
1 Press (OFF) or (DSPL) during operation.
2 Press (DSPL) for two seconds.
1 Set the hour digits.
2 Press (SEL) momentarily.
3 Set the minute digits.
3 Press (DSPL) momentarily.
Note
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio.
The hour digit flashes.
To go backward
To go forward
The minutes digits flashes.
To go backward
To go forward
The clock starts.
Getting Started/Cassette Player
Cassette Player
Listening to a tape
Insert a cassette.
Playback will start automatically.
If a cassette is already inserted, press
(SOURCE) repeatedly until “TAPE” is
displayed.
The side facing up is being played.
The side facing down is being played.
Tip
To change the tape transport direction, press (MODE)
(*) during tape playback.
Fast-winding the tape
During playback, press either side of
(SEEK/AMS) for two seconds.
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
Press
(OFF)
6
To
Stop playback
Eject the cassette
Fast-forward
Rewind
100
1000
1000
1008
1008
SEEK
AMS
TAPE
TAPE
6
EN
SEEK
AMS
To locate the succeeding tracks
To locate the preceding tracks
Playing a CrO2 or metal tape
Press (4) when you want to listen to a
CrO2 (TYPE II) or metal (TYPE IV) tape.
“MTL” appears on the display.
To cancel this function, press (4).
Switching to the radio while fast-
winding a tape
— Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
When fast-forwarding or rewinding with
(SEEK/AMS), the tuner will turn on
automatically.
To cancel this mode, press (5).
Skipping blanks during tape
playback — Blank skip
Press (6) during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds will
automatically be skipped during tape
playback.
To cancel this mode, press (6).
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
Note
The AMS function may not work when :
the blanks between tracks are shorter than 4 seconds
there is noise between tracks
there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) momentarily
during tape playback, the displayed item
changes as follows:
z Tape playback z Clock z Frequency*
* While the ATA function is activated.
Playing a tape in various
modes
Searching for the desired track
— Intro scan
Press (1) during playback.
“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again.
The unit returns to the normal playback mode.
Playing tracks repeatedly
— Repeat play
Press (2) during playback.
“REP” appears on the display.
When the current played track is over, it will
be played again from the beginning.
To cancel this mode, press again.
7
EN
Cassette Player/Radio
Memorising only the
desired stations
Up to 6 stations on each band (FM1, FM2, FM3,
MW and LW) can be stored on the preset
number buttons in the order of your choice.
Therefore, 18 FM stations can be memorised.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
1 Press (SOURCE) repeatedly to select the
tuner.
2 Press (MODE) repeatedly to select the
band.
3 Press (SEEK/AMS) to search for the
station you wish to store on a preset
number button.
4 Press the desired preset number button
((1) to (6)) for two seconds.
The number of the selected preset number
button appears on the display.
Receiving the memorised
stations
1 Press (SOURCE) repeatedly to select the
tuner.
2 Press (MODE) repeatedly to select the
band.
3 Press the preset number button ((1) to
(6)) momentarily on which the desired
station is stored.
Tip
Press either side of (PRESET/DISC) to receive in order the
stations stored in the memory (Preset Search Function)
(XR-C353 only).
Radio
Memorising stations
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorises them in order of their
frequency.
PREVENTING ACCIDENTS!
When tuning in while driving, use the
automatic tuning or memory preset search
function instead of manual tuning.
1 Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
TAPE n TUNER n CD/MD (XR-C353 only)
2 Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
FM1 n FM2 n FM3 n MW n LW
3 Press (BTM) for two seconds.
Notes
The unit will not store stations with weak signals on the
preset number buttons. If there are only a few stations
received, some preset number buttons will remain empty.
When there is a preset number indicated on the display,
the unit will store stations on all preset number buttons
from the one currently displayed.
8
EN
Changing the displayed items
Each time you press (DSPL), the display
changes between the frequency and the clock.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of the button repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) momentarily to lights up “LCL” on the display
(local seek mode). Only the stations with relatively strong
signals can be tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
(SOURCE)
(MODE)
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD and MD
changer by the rotary remote.
By pressing buttons (the SOURCE
and the MODE buttons)
Every time you press (SOURCE), the
source changes as follows:
TAPE n TUNER n CD/MD (XR-C353 only)
Pressing (MODE) changes the operation in the
following ways:
the tape transport direction.
the band, FM1 n FM2 n FM3 n MW n LW.
the CD/MD changer. (XR-C353 only)
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback. (XR-C353 only)
Tune in the stations automatically.
Rotate and hold the control to tune in the
specific station.
9
EN
Adjusting the sound
characteristics
1 Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2 Adjust the selected item by pressing
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press (MUTE).
The “MUTE” indication flashes.
To restore the previous volume level, press
again.
Tip
The unit decreases the volume automatically when a
telephone call comes in (Telephone-mute function) (XR-
C353 only).
Changing the sound and
beep tone
Boosting the bass sound — D-Bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
singal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sound
than Analog D-bass.
Radio/Other Functions
By rotating the control while
pushing in (the PRESET/DISC control)
Push in and rotate the control:
Receive the stations memorised on the
preset button.
Change the disc. (XR-C353 only)
Other operations
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
If you need to mount the rotary remote on the
right side of the steering column, you can
reverse the controls' operative direction.
Press (SEL) for two seconds while
pushing in the VOL control.
OFF
Press(OFF) to
turn off the unit.
Rotate the VOL control
to adjust the volume.
Press (MUTE)to
mute the sound.
Press (DSPL) to change the
display items.
Press (SEL)
to adjust
and select.
To increase
To decrease
continue to next page n
10
EN
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS”* appears in the display.
To cancel, turn the control to the OFF position.
* If an optional CD changer has the Digital D-BASS
function, “DIGITAL D-BASS” appears on the display
during CD playback (XR-C353 only).
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled (XR-
C353 only).
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
With Optional Equipment
CD/MD Changer (XR-C353 only)
You can control up to two CD or MD changers
with this unit.
Playing a CD/MD
Press (SOURCE) until the desired
changer indication appears on the
display.
CD/MD playback starts.
When a CD/MD changer is connected, all the
tracks play from the beginning.
Note
Even if you select an MD changer, “CD” appears in the
display.
Selecting CD/MD changers (when
several CD/MD changers are
connected)
Press (MODE) repeatedly to select the desired
CD/MD changer.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc and track number
$
Clock
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you wish
to skip.
To locate the succeeding tracks
To locate the preceding tracks
SEEK
AMS
Level
Digital D-BASS
Frequency (Hz)
Analog D-BASS
Level
Frequency (Hz)
11
EN
Locating a specific point in a track
— Manual search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired part.
Switching to other discs
During playback, press either side of
(PRESET/DISC).
Scanning the tracks
— Intro scan
The first 10 seconds of all the tracks on the
current disc are played in order. After the first
disc is over, the next disc is played.
Press (1) during playback.
“INTRO” appears on the display.
When you find the desired track, press again .
The unit returns to the normal CD/MD
playback mode.
Playing tracks repeatedly
— Repeat play
To repeat a track
Press (2) repeatedly during CD/MD
playback until “REP 1” is displayed.
To repeat a disc
Press (2) repeatedly during CD/MD
playback until “REP 2” is displayed.
To search forward
To search backword
SEEK
AMS
To advance to the
next disc
To return to the
previous disc
DISC
PRESET
REP 2
(Disc repeat)
REP 1
(Track repeat)
REP 3 (Changer
repeat)
Other Functions/CD/MD Changer
To repeat all the discs in the
current changer
Press (2) repeatedly during CD/MD
playback until “REP 3” is displayed.
Each time you press (2) the display changes as
follows:
Playing tracks in random
order
— Shuffle play
To play the tracks on the current
disc in random order
Press (3) repeatedly during CD/MD
playback until “SHUF 1” is displayed.
To play all the tracks in the current
changer in a random order
Press (3) repeatedly during CD/MD
playback until “SHUF 2” is displayed.
Each time you press (3) the display changes as
follows:
$
SHUF 1 (Disc shuffle)
$
SHUF 2 (Changer shuffle)
$
Cancel (Normal disc playback mode)
If you press (1) during shuffle play, the first 10
seconds of all tracks will be played in random
order.
Cancel (Normal
disc playback
mode)
12
EN
Notes on Cassettes
Cassette care
Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
Do not expose cassettes to direct sunlight,
extremely cold temperatures or moisture.
Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.
Distorted cassettes and loose labels can cause
problems when inserting or ejecting tapes.
Remove or replace loose labels.
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tapes used for these cassettes are
very thin and tend to be stretched easily.
Frequent playing and stopping of these tapes
may cause them to be pulled into the cassette
deck mechanism.
Slack
Additional
Information
Precautions
If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
If no sound comes from the speakers of a
2-speaker system, set the fader control to the
centre position.
When the tape is played back for a long
period, the cassette may become warm
because of the built-in power amplifier.
However, this is not a sign of malfunction.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To maintain high quality sound
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.
13
EN
Dismounting the unit
1
2
3
4
Release key (supplied)
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing (RELEASE),
then detach it and clean the connectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
be damaged.
Fuse (10 A)
Main unit
Back of the front panel
Additional Information
14
EN
Location of controls
Refer to the pages for further details.
1 SEEK/AMS button 5, 6, 7, 8, 10, 11
2 SOURCE button (TAPE/TUNER/CD*/MD*)
5, 7, 10
3 (+)(–) (volume/bass/treble/balance/
fader control) button 5, 9
4 MODE (*) button
During tuner reception:
BAND select 7
During tape playback:
Transport direction change 5
During CD*/MD* playback:
CD/MD Changer select 10
5 OFF button 4, 5
6 DSPL (display mode change/time set)
button 5, 6, 8, 10
7 6 (eject) button 5
8 During radio reception:
Preset number buttons 7
During tape/CD*/MD* playback:
(1) INTRO button 6, 11
(2) REPEAT button 6, 11
(3) SHUF (Shuffle) button* 11
(4) MTL (Metal) button 6
(5) ATA (Automatic Tuner
Activation) button 6
(6) BL.SKIP (Blank Skip) button 6
9 RELEASE (front panel release) button 4,
13
Reset button (located on the front side
of the unit hidden by the front panel)
Press this button when you use this unit
for the first time, when you have changed
the car battery, or when the buttons of this
unit do not function properly.
MUTE button 9
!™ SEL (control mode select) button 5, 9, 10
POWER SELECT switch (located on the
bottom of the unit)
See “POWER SELECT Switch” in the
Installation/Connections manual.
Display window
!∞ BTM (Best tuning memory) button 7
PRESET/DISC button* 7, 11
During tuner reception:
Preset station select 7
During CD/MD playback:
Disc select 11
LCL button 8
!• D-BASS control 9
* XR-C353 only
The illustration of the front panel in the manual is
of the XR-C353.
RELEASE
D-BASS
DSPL
MODE
SEEK
AMS
SEL
SOURCE
MUTE
OFF
213
546
INTRO REPEAT SHUF
ATA BL.SKIP
BTM LCL
DISC
PRESET
OFF
1
2
3
MTL
15
EN
Specifications
Cassette player section
Tape track 4-track 2-channel stereo
Wow and flutter 0.08 % (WRMS)
Frequency response 30 – 20,000 Hz
Signal-to-noise ratio 58 dB
Tuner section
FM
Tuning range 65.0 – 74.0 MHz
(at 30 kHz step)
87.5 – 108.0 MHz
(at 50 kHz step)
Aerial terminal External aerial connector
Intermediate frequency 10.7 MHz
Usable sensitivity 8 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 65 dB (stereo),
68 dB (mono)
Harmonic distortion at 1 kHz
0.5 % (stereo),
0.3 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 – 15,000 Hz
Capture ratio 2 dB
MW/LW
Tuning range MW: 531 – 1,602 kHz
LW: 153 – 281 kHz
Aerial terminal External aerial connector
Intermediate frequency 10.71 MHz/450kHz
Sensitivity MW: 30 µV
LW: 50 µV
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 35 W × 4 (at 4 ohms)
General
Outputs Power aerial control lead
Power amplifier control
lead (XR-C353 only)
Telephone mute control
lead (XR-C353 only)
Line out (XR-C353 only)
Tone controls Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
Power requirements 12 V DC car battery
(negative ground)
Dimensions Approx. 188 × 58 × 181
mm (w/h/d)
Mounting dimensions Approx. 182 × 53 × 164 mm
(w/h/d)
Mass Approx. 1.2 kg
Supplied accessories Parts for installation and
connections (1 set)
Front panel case (1)
Rotary commander
RM-X2S
Optional accessories Bus cable (supplied with
an RCA pin cord)
RC-61 (1 m), RC-62 (2 m)
RCA pin cord
RC-63 (1 m), RC-64 (2 m),
RC-65 (5 m)
Optional equipment CD changer
CDX-705 (10 discs),
CDX-T60 (6 discs),
CDX-T62 (6 discs),
MD changer
MDX-60, MDX-61
Source selector XA-C30
Design and specifications are subject to change without
notice.
Additional Information
16
EN
Disc play (XR-C353 only)
Problem
Playback sound skips.
Cause/Solution
A dusty or defective disc.
Troubleshooting guide
The following checklist will assist in the correction of most problems you may encounter with your
unit.
Before going through the checklist below, refer to the operating procedures.
General
Cause/Solution
Adjust the volume with (+).
Set the fader control to the center position for 2-speaker
systems.
Remove the front panel and clean the connectors. See “Cleaning
the Connectors” in “Maintenance” for details.
An optional power amplifier is connected and you are not
using the built-in amplifier (XR-C353 only).
The beep tone is muted.
Problem
No sound.
Indications do not appear on
the display.
No beep tone.
Tape playback
Cause/Solution
Contamination of the tape head. n Clean the head.
There is noise in the space between tracks.
A blank space is too short (less than four seconds).
+ on (SEEK/AMS) is pressed immediately before the
following track.
= on (SEEK/AMS) is pressed immediately after the track
starts.
A long pause, or a passage of low frequencies or very low
sound level is treated as a blank space.
Problem
Playback sound is distorted.
The AMS does not operate
correctly.
Radio reception
Problem
Preset tuning is not possible.
Automatic tuning is not possible.
Cause/Solution
Store the correct frequency.
The broadcast is too weak.
The broadcast is too weak. n Use manual tuning.
17
EN
Error displays (XR-C353 only) (when the optional CD/MD changer(s) is connected)
The following indications will flash for about five seconds and an alarm sound will be heard.
Display Cause
The disc magazine is not inserted in
the CD/MD changer.
No disc is inserted in the disc
magazine.
The disc is dirty.
The disc is inserted upside down.
The CD/MD changer cannot be
operated because of some problem.
The ambient temperature is more than
50° C.
Solution
Insert the disc magazine with discs
into the CD/MD changer.
Take out the magazine and insert a
disc.
Clean the disc.
Insert the disc correctly.
Press the reset button on the unit.
Wait until the temperature goes
below 50° C.
If the above-mentioned solutions do not help to improve the situation, consult your nearest Sony
dealer.
E-01
E-02
E-04
E-99
TEMP
Additional Information
18
EN
A
Automatic Music Sensor (AMS) 6, 10
Automatic tuning 8
Automatic Tuner Activation (ATA) 6
B
Balance 9
Bass 9
Best Tuning Memory (BTM) 7
Blank skip 6
C
Caution alarm 4
CD playback 10
Clock 5
D, E
DIGITAL D-BASS (D-Bass) 9
Display 6, 10
F, G, H
Fader 9
Fast-forward 5
Front panel 4
Fuse 13
I, J, K
Intro scan 6, 11
L
Local seek mode (LCL) 8
M, N, O
Manual search 11
Manual tuning 8
MD playback 10
METAL 6
Mute 10
P, Q
Preset search 7
R
Radio 7
Repeat play 6, 11
Reset 4
Rewind 5
Rotary remote 4, 8, 9
Index
S
Shuffle play 11
T, U, V, W, X, Y, Z
Tape playback 5
Telephone mute 10
Treble 9
19
EN
PL
2
Witamy !
Dziękujemy za zakupienie Odtwarzacza Kaset
Sony. Nasz sprzęt zapewni Państwu sporo
przyjemności polegającej na wygodzie
korzystania z wielu funkcji przy pomocy pilota
zdalnego sterowania, typu obrotowego.
Zakupiony sprzęt spełnia nie tylko funkcje
odtwarzcza kaset i radioodbiornika, lecz
oferuje również możliwości poszerzenia
systemu przez podłączenie dodatkowych opcji
jak np. odtwarzacza dysków CD/MD (Tylko dla
modelu XR-C353).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Sony XR-3753 Instrukcja obsługi

Kategoria
Radioodbiorniki samochodowe
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla