Geovision GV-PA482 Instrukcja instalacji

Typ
Instrukcja instalacji
January 25, 2019
1
GV-PA482 PoE Adapter
The GV-PA482 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
camera through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP camera anywhere in a building where power outlets are not available.
Packing List
1. GV-PA482 PoE Adapter x 1
2. Power Adapter (DC 48V, 2.5A, 120 W)
Connections
Two Ethernet cables are required for the connection.
1. Connect one end of the first Ethernet cable into the PoE 10/100 port on the GV-PA482,
and the other end to your camera.
2. Connect one end of the second Ethernet cable into the LAN 10/100 port on the GV-
PA482, and the other end to the hub or router connecting to your computer.
3. Insert the white wire of the supplied DC power adapter left-side pin of the terminal block
on the GV-PA482, and the black wire to the right-side pin.
LAN 10/100
Power IN
January 25, 2019
2
4. Attach the AC power cord to the DC power adaptor.
5. Connect the AC power cord to the power outlet. The Power LED on the front panel of the
GV-PA482 turns green now.
Specifications
PoE Standard
High Power Over Ethernet (Max. 120 W)
PoE Output (10 / 100 Out)
DC 48V, 2.5A (Max. 120 W)
Ethernet Cable Length
Max 100 m (328 ft) from GV-PA482 to IP device, CAT5e
Power Input
AC 100V ~ 240V, 2.5A
Operating Temperature
-10°C ~ 50°C (14°F ~ 122°F)
Dimensions (L x W x H)
43 x 69 x 40 mm (1.69 x 2.72 x 1.57”)
Weight
130 g (0.29 lb)
All specifications are subject to change without notice.
  • Page 1 1
  • Page 2 2

Geovision GV-PA482 Instrukcja instalacji

Typ
Instrukcja instalacji

w innych językach