Geovision GV-PA191 Instrukcja instalacji

Geovision
Marka
Geovision
Model
GV-PA191
Typ
Instrukcja instalacji
January 25, 2019
1
GV-PA191 PoE Adapter
The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP device anywhere in a building where power outlets are not available.
Packing List
1. GV-PA191 PoE Adapter x 1
2. AC Power Adapter x 1
3. Installation Guide x 1
Overview
January 25, 2019
2
Connections
Two Ethernet cables are required for the connection.
1. Connect one end of the first Ethernet cable into the LAN 10 / 100 port on the GV-PA191,
and the other end to the hub connecting to the computer which will be used to access the
IP device.
2. Connect one end of the second Ethernet cable into the PoE 10 / 100 port on the GV-
PA191, and the other end to the IP device.
3. Insert the white-dotted wire of the supplied AC Power Adapter into the left-side pin (+) of
the terminal block on the GV-PA191, and the black wire to the right-side pin (-).
4. Connect the other end of the supplied AC Power Adapter to the power outlet. The
Power LED on the front panel of the GV-PA191 turns green now.
Specifications
PoE Standard
Power over Ethernet (Max. 19 W)
PoE Output (10 / 100 Out)
DC 48 V, 400 mA (Max. 19 W)
Ethernet Cable Length
Max 100 m / 328 ft from Hub to IP device, CAT5
Power Input
DC 48 V, 400 mA
Operation Temperature
-10 °C ~ 50 °C / 14 °F ~ 122 °F
Dimensions (L x W x H)
43 x 69 x 40 mm / 1.69 x 2.72 x 1.57 in
Weight
130 g / 0.29 lb
  • Page 1 1
  • Page 2 2

Geovision GV-PA191 Instrukcja instalacji

Geovision
Marka
Geovision
Model
GV-PA191
Typ
Instrukcja instalacji
Pobierz PDF
raport

w innych językach

Powiązane artykuły

Inne dokumenty