Novus NMS NVR X-2U/24 Instrukcja obsługi

NMS NVR X-2U/XX

NMS NVR X4U

Start-up

guide

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

2

TERMS OF USE

To ensure stability and correct operation of the devices, they are sold as a whole. Making any

modifications described below is equivalent to tampering with the device by the User and forfeiting the

warranty. All damages resulting from the modification of the device by the User will be payable.

1. Do not enable, install, update operating systems installed on devices;

2. Do not enable, install, or update drivers for component components of devices;

3. Do not enable the Windows Firewall "Firewall", Windows Defender;

4. Do not install anti-virus software, firewalls etc.;

5. Do not install software provided by third parties;

6. Do not carry out repairs yourself;

7. Do not modify the units without the manufacturer's authorization;

8. Do not make copies of system disks to other media and move, modify or perform any other tasks

related to OS disks;

9. Do not modify the BIOS settings, such as "Overclocking", "RAID" redundancy, etc .;

10. Do not connec devices to internet without appropriate security hardware, exposing them to the

risk of malware installation ;

11. Do not update the motherboard Bios and other firmware of the other components of the unit;

12. Periodically clean all air inlets and outlets of the unit to maximize airflow;

13. Periodic maintenance of system should be made;

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

3

NOTES AND WARNINGS

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:

DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT

AND OF THE COUNCIL of 26 February 2014 on the harmonisation

of the laws of the Member States relating to the making available on the mar-

ket of electrical equipment designed for use within certain voltage limits.

DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIMENT

AND OF THE COUNCIL of 26 February 2014 on the harmonisation

of the laws of the Member States relating to electromagnetic compatibility

(OJ L 96, 29.3.2014, p. 79–106, with changes)

DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIA-

MENT

AND OF THE COUNCIL of 4 July 2012 on waste electrical

DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT

AND OF THE COUNCIL of 8 June 2011 on the restriction of the use

of certain hazardous substances in electrical and electronic equipment

(OJ L 174, 1.7.2011, p. 88–110, with changes)

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

4

WARNING!

THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A

PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE

YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER

DEVICE OPERATION.

WARNING!

USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO

USER-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE

PERSONNEL MAY OPEN THE UNIT

INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE

PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN

PRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE

PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE

PRODUCT, MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF

EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN

ACTION.

IMPORTANT SAFEGUARDS AND WARNINGS

1. Prior to undertaking any action please consult the following manual and read all the safety and

operating instructions before starting the device.

2. Please keep this manual for the lifespan of the device in case referring to the contents of this manual

is necessary;

3. All the safety precautions referred to in this manual should be strictly followed, as they have a

direct influence on user’s safety and durability and reliability of the device;

4. All actions conducted by the servicemen and users must be accomplished in accordance with the

user’s manual;

5. The device should be disconnected from power sources during maintenance procedures;

6. Usage of additional devices and components neither provided nor recommended by the producer

is forbidden;

7. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers

etc.) is not recommended since it may lead to heat build-up and damaging the device itself

as a consequence;

8. Mounting the camera on unstable surface or using not recommended mounts is forbidden.

Improperly mounted camera may cause a fatal accident or may be seriously damaged itself. The

camera must be mounted by qualified personnel with proper authorization, in accordance with this

user’s manual;

SAFETY CONDITIONS

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

5

SAFETY CONDITIONS

9. Device should be supplied only from a power sources whose parameters are in accordance with those

specified by the producer in the camera technical datasheet. Therefore, it is forbidden to supply the

camera from a power sources with unknown parameters, unstable or not meeting producer’s

requirements;

10. Signal cables (conducting TV or / and telemetric signal) should be placed in a way excluding the

possibility of damaging them by accident. Special attention must be paid to cables getting from the

camera and connecting the power supply;

11. To avoid equipment damage, whole TV circuit should be equipped with properly made

discharge-, overload- and lightning protection devices. Usage of separating transformers is advised;

12. Electric installation supplying the device should be designed to meet the specifications given

by the producer in such a way that overloading is impossible;

13. User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should

be conducted only by qualified service personnel;

14. Unplug the camera from the power source immediately and contact the proper maintenance

department when the following occurs:

 Damages to the power cord or to the plug itself;

 Liquids getting inside the device or exposure to strong mechanical shock;

 Device behaves in a way not described in the manual and all adjustments approved by the

manufacturer and possible to apply by user himself, seem not to have any effect;

 Camera is damaged;

 Atypical behaviour of the camera components may be seen (heard).

15. In necessity of repairs attention to using only original replacement parts (with their parameters

in accordance with those specified by the producer) should be paid. Non-licensed service and non

-genuine replacement parts may cause fire or electrocution;

16. After maintenance activities tests should be run to ensure proper operation of all the functional

components of the device.

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN

PRODUCT IN

USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT

DOES

NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST

BE

CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S

RESPONSIBILITY FOR

THE RESULTS OF SUCH AN ACTION

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

6

I. OVERALL CHARACTERISTICS

1. BOX CONTENT

Każda z opisywanych jednostek powinna posiadać:

• Main Unit

• Power cord

• Keyboard and mouse

• Manual

ATTENTION !!!

Before starting installation of main unit please check the contents of the kit with the above list. If any

discrepancies are found, the installation should be abandoned and the distributor contacted. .

2. SPECIFICATION

The table below presents the differences between NMS NVR X-2U and NMS NVR X-4U .

Other parameters of the units are identical. .

ATTENTION!!!

To support more than two monitors, it is necessary to use the Display Port output.

An additional license key is required to support more than 1 RTSP channel and 1 ONVIF channel.

INTRODUCTORY INFORMATION

Unit Single disc capacity Total capacity

NMS NVR X-2U/24 2TB 24TB

NMS NVR X-2U/48 4TB 48TB

NMS NVR X-2U/72 6TB 72TB

NMS NVR X-2U/96 8TB 96TB

NMS NVR X-2U/120 10TB 120TB

NMS NVR X-2U/144 12TB 144TB

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

7

2.1 NMS NVR X2U/XX

SPECIFICATIONS

Video

IP Camera Recording 160 channels at 1920x1080 (video+audio) using H.264 codec

200 channels at 1920x1080 (video+audio) using H.265 codec

Maximum Supported Camera Resoluon 4000x3000

Supported Codes H.264, H.264+, H.265, H.265+, MJPEG

Supported Cameras and Protocols Novus, Novus sheye, ONVIF, ONVIF sheye, RTSP, RTSP sheye

Dualstreaming Support yes

Display

Monitor Output 3 x Mini Display Port 1.2, (up to 3 monitors simultaneously)

Maximum Resoluon 3 x 4K UltraHD

Audio

Audio input 1 x Mic in(3,5mm)

Audio Output 3 x Mini Display Port 1.2

Audio Input/Output in Cameras Supports audio input/output build in cameras

Performance - H.264

2MPX IP Camera Recording up to: 160 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 8 main streams (while recording: 160 main streams)

Playback up to: 8 main streams (while recording: 160 main streams)

4MPX IP Camera Recording up to: 120 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 8 main streams (while recording: 120 main streams)

Playback up to: 8 main streams (while recording: 120 main streams)

5MPX IP Camera Recording up to: 100 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 8 main streams (while recording: 100 main streams)

Playback up to: 8 main streams (while recording: 100 main streams)

8MPX IP Camera Recording up to: 80 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 6 main streams (while recording: 80 main streams)

Playback up to: 6 main streams (while recording: 80 main streams)

12MPX IP Camera Recording up to: 80 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 4 main streams (while recording: 80 main streams)

Playback up to: 4 main streams (while recording: 80 main streams)

Performance - H.265

2MPX IP Camera Recording up to: 200 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 8 main streams (while recording: 200 main streams)

Playback up to: 8 main streams (while recording: 200 main streams)

4MPX IP Camera Recording up to: 160 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 8 main streams (while recording: 160 main streams)

Playback up to: 8 main streams (while recording: 160 main streams)

5MPX IP Camera Recording up to: 120 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 4 main streams (while recording: 120 main streams)

Playback up to: 4 main streams (while recording: 120 main streams)

8MPX IP Camera Recording up to: 90 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 4 main streams (while recording: 90 main streams)

Playback up to: 4 main streams (while recording: 90 main streams)

12MPX IP Camera Recording up to: 90 main streams (while displaying: 8 sub streams)

Display up to: 8 sub streams or 4 main streams (while recording: 90 main streams)

Playback up to: 4 main streams (while recording: 90 main streams)

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

8

SPECIFICATIONS

Recording

Recording Mode Connuous, Schedule, Panic, Triggered: manually, by alaram input, moon detecon, video analysis, POS,

temerature alarm

Schedule individual sengs for: each camera, each day of the week, specic days (holidays etc.), conguraon with

an accuracy of: 15 min, possibility of combining individual recording modes

Prealarm/Postalarm Up to: 30s / Up to: 600s

Playback

Recorded Data Search By Date/Time, Events, “Text-in”, Image Analysis Events

Backup

Backup Methods USB port (HDD lor Flash drive), Network

Backup File Format JPEG, BMP, AVI, NMS

HDD

Internal storage for system 1 x HDD 2.5" SATA

Internal Storage for Recording 12 x 6TB HDD 3,5" 6TB surviliance grade server storage media

RAID Redundancy Raid types: RAID 0, RAID 1, RAID 5, RAID 6

Alarms

Alarm Input/output in cameras Support of alarm input and output built in cameras

Moon detecon Support of moon detecon built in cameras

Video Analycs Supported built in analycs in camera

Temperature alarm Support of temperature alarm built in cameras

Licence plate recognion (LPR) Support of selected image analysis funcons available in the camera

Network

Network Interface 2 x Ethernet - RJ45 interface, 10/100/1000 Mbit/s

Network Throughput up to 450Mbit/s from all cameras,

up to 450Mbit/s to all client staons,

Max network throughput: 450Mbit/s for each network card

Network Protocols Support HTTP, TCP/IP, IPv4/v6, UDP, HTTPS, Mulcast, FTP, DHCP, DNS, DDNS, NTP, RTSP, SAMBA

Compable Mobile Applicaons NMS Mobile

PTZ

PTZ Funcons pan, lt, zoom, preset commands, paerns, tours, auto-scans, focus, iris

Addional interfaces

USB Ports 6 x USB 3.0

Operang System

Operang System Microso Windows 10 IoT

Recording and Surveillance System NMS (Novus Management System)

Addional Soware NMS, Internet Explorer

Operaon Mode Pentaplex

OSD Polish, English, Russian, others

Control PC mouse and keyboard (in-set included), DCZ keyboard

System Diagnosc automac control of: HDDs, Temperature, Fan, Network, Camera connecon loss

Security Password protecon, IP ltering, MAC ltering, Liming the number of connecons

Integraon

Integrated Devices Novus IP Cameras, Novus IP Recorders, Novus AHD Recorders, NMS-ANPR Soware, DSC Systems, POS

Systems (Posnet, Upos and other), ONVIF Devices, RTSP Devides

Installaon Parameters

Dimensions 437mm (W) x 89mm(H) x 648mm (D)

Weight 24 kg (with HDDs)

Power Supply built in 2 x redundant power supply 230VAC input with 960W power each

Power consumpon/heatprint 490W/400W (without HDD for recording)

Operang Temperature 5°C ~ 35°C

RACK Mount 19" 2U

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

9

2.2 NMS NVR X-4U

SPECIFICATIONS

Video

IP Camera Recording 160 channels at 1920x1080 (video+audio) using H.264 codec

200 channels at 1920x1080 (video+audio) using H.265 codec

Maximum Supported Camera Resoluon 4000x3000

Supported Codes H.264, H.264+, H.265, H.265+, MJPEG

Supported Cameras and Protocols Novus, Novus sheye, ONVIF, ONVIF sheye, RTSP, RTSP sheye

Dualstreaming Support yes

Display

Monitor Output 1 x HDMI 2.0b, 1 x Dual link-DVI, 1 x Display Port 1.2 (up to 3 monitors simultaneously)

Maximum Resoluon 3 x 4K UltraHD

Audio

Audio input 1 x Mic in(3,5mm)

Audio Output 1 x liniowe (3,5mm), 1 x HDMI, 1 x Display Port

Audio Input/Output in Cameras Supports audio input/output build in cameras

Performance - H.264

2MPX IP Camera Recording up to: 160 main streams (while displaying: 60 sub streams)

Display up to: 60 sub streams or 25 main streams (while recording: 160 main streams)

Playback up to: 25 main streams (while recording: 160 main streams)

4MPX IP Camera Recording up to: 120 main streams (while displaying: 50 sub streams)

Display up to: 50 sub streams or 16 main streams (while recording: 120 main streams)

Playback up to: 16 main streams (while recording: 120 main streams)

5MPX IP Camera Recording up to: 100 main streams (while displaying: 40 sub streams)

Display up to: 40 sub streams or 10 main streams (while recording: 100 main streams)

Playback up to: 10 main streams (while recording: 100 main streams)

8MPX IP Camera Recording up to: 80 main streams (while displaying: 30 sub streams)

Display up to: 30 sub streams or 6 main streams (while recording: 80 main streams)

Playback up to: 6 main streams (while recording: 80 main streams)

12MPX IP Camera Recording up to: 80 main streams (while displaying: 25 sub streams)

Display up to: 25 sub streams or 4 main streams (while recording: 80 main streams)

Playback up to: 4 main streams (while recording: 80 main streams)

Performance - H.265

2MPX IP Camera Recording up to: 200 main streams (while displaying: 60 sub streams)

Display up to: 60 sub streams or 20 main streams (while recording: 200 main streams)

Playback up to: 20 main streams (while recording: 200 main streams)

4MPX IP Camera Recording up to: 160 main streams (while displaying: 40 sub streams)

Display up to: 40 sub streams or 9 main streams (while recording: 160 main streams)

Playback up to: 9 main streams (while recording: 160 main streams)

5MPX IP Camera Recording up to: 120 main streams (while displaying: 35 sub streams)

Display up to: 35 sub streams or 4 main streams (while recording: 120 main streams)

Playback up to: 4 main streams (while recording: 120 main streams)

8MPX IP Camera Recording up to: 90 main streams (while displaying: 25 sub streams)

Display up to: 25 sub streams or 4 main streams (while recording: 90 main streams)

Playback up to: 4 main streams (while recording: 90 main streams)

12MPX IP Camera Recording up to: 90 main streams (while displaying: 16 sub streams)

Display up to: 16 sub streams or 4 main streams (while recording: 16 main streams)

Playback up to: 4 main streams (while recording: 90 main streams)

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

10

SPECIFICATIONS

Recording

Recording Mode Connuous, Schedule, Panic, Triggered: manually, by alaram input, moon detecon, video

analysis, POS, temerature alarm

Schedule individual sengs for: each camera, each day of the week, specic days (holidays etc.), con-

guraon with an accuracy of: 15 min, possibility of combining individual recording modes

Prealarm/Postalarm Up to: 30s / Up to: 600s

Playback

Recorded Data Search By Date/Time, Events, “Text-in”, Image Analysis Events

Backup

Backup Methods USB port (HDD lor Flash drive), Network

Backup File Format JPEG, BMP, AVI, NMS

HDD

Internal storage for system 1 x HDD 3.5" SATA

Internal Storage for Recording 8 avalible bays for 3,5" HDD surviliance grade storage media

Alarms

Alarm Input/output in cameras Support of alarm input and output built in cameras

Moon detecon Support of moon detecon built in cameras

Video Analycs Supported built in analycs in camera

Temperature alarm Support of temperature alarm built in cameras

Licence plate recognion (LPR) Support of selected image analysis funcons available in the camera

Network

Network Interface 2 x Ethernet - RJ45 interface, 10/100/1000 Mbit/s

Network Throughput up to 450Mbit/s from all cameras,

up to 450Mbit/s to all client staons,

Max network throughput: 450Mbit/s for each network card

Network Protocols Support HTTP, TCP/IP, IPv4/v6, UDP, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, SAMBA

Compable Mobile Applicaons NMS Mobile

PTZ

PTZ Funcons pan, lt, zoom, preset commands, paerns, tours, auto-scans, focus, iris

Addional interfaces

USB Ports 6 x USB 3.0

Operang System

Operang System Microso Windows 10 IoT

Recording and Surveillance System NMS (Novus Management System)

Addional Soware NMS, Internet Explorer

Operaon Mode Pentaplex

OSD Polish, English, Russian, others

Control PC mouse and keyboard (in-set included), DCZ keyboard

System Diagnosc automac control of: HDDs, Temperature, Fan, Network, Camera connecon loss

Security Password protecon, IP ltering, MAC ltering, Liming the number of connecons

Integraon

Integrated Devices Novus IP Cameras, Novus IP Recorders, Novus AHD Recorders, NMS-ANPR Soware, DSC

Systems, POS Systems (Posnet, Upos and other), ONVIF Devices, RTSP Devides

Installaon Parameters

Dimensions 178mm (W) x 452mm(H) x 648mm (D)

Weight 28 kg (without HDD)

Power Supply built in 700W, with 230VAC input

Power consumpon/heatprint 350W/280W (without HDD for recording)

Operang Temperature 5°C ~ 35°C

RACK Mount 19" 4U

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

11

DANE TECHNICZNE

3. Connectors

3.1 NMS NVR X-2U Connectors

(A) Power button

(B) Reset button

(C) Activity Diodes

(D) 12 SAS Drive Bays

(E) Power connector 230VAC

(F) System drive bays

(G) PS2 Keyboard/Mouse connector

(H) USB 3.0 Connector

(I) Gigabit Ethernet LANConnector

(J) Audio Mini-JACK Connector

(K) mini Display Port Connectors

CONNECTORS

A

B D

C

F

G

H

I

J

M

E

K

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

12

DANE TECHNICZNE CONNECTORS

3.2 NVR X-4U/XX Connectors

(A) Power Connector 230V

(E) PS2 Keyboard/Mouse Connector

(A) USB Connector

(B) Gigabit Ethernet LAN Connector

(C) Audio Mini-JACK Connector

(D) Fans

(E) Video Connector

(F) Reset/Power buttons

(G) HDD Bays

A

C

D

E

F

G

B

C

H

M

I

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

13

FIRST START-UP

4. FIRST START-UP

ATTENTION !!

The first start of the recorder requires additional steps. For security reasons, the user will be

asked to set an administrator password.

An information window will be displayed with the selection of the NMS interface language.

Then we will be asked to enter a new administrator password. Enter the new password in the

field and confirm it by entering it again, then press OK to save.

ATTENTION!!!

The newly created password should be remembered because it will be the default administrator

password on the device. If the password is lost, restoring it is a paid service.

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

14

After entering the password, the NMS application will start.

After entering user data:

- pressing the Login button starts the NMS application

- pressing the Disable button closes the NMS application

- pressing the X button in the upper right corner of the window closes it without entering any data.

It does not close the NMS application. .

To log in, use the default "root" login and password used in the previous step. Remember that the

software is case-sensitive

After the first login, we will see the configuration wizard window, which will guide us by adding

devices to the recorder,

FIRST START-UP

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

15

NMS SETTINGS WIZARD

4.1 NMS SETTINGS WIZARD

The first start of the NMS program is started with the automatic start of the wizard that allows

you to configure the program. The wizard starting window is illustrated below :

Selecting the Show at startup option starts the wizard each time the program is started. To go to the

next window, select Next, the Cancel button will close the wizard and open the main program window.

Depending on the type of installation, NMS have the following features:

Server : - computing power is mainly directed at the recording of camera streams;

- enables streaming to client stations;

- stream display is restricted;

Standalone: - computing power is used to record and display streams;

- enables streaming to client stations;

- enables displaying multiple streams;

Client: - computing power is directed to receiving and displaying streams from the server;

- no recording possible;

The choice of operating mode affects the fields displayed by the wizard. If Next is selected,

another wizard window will open containing a camera/recorder or NMS server search engine.

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

16

NMS SETTINGS WIZARD

The search process starts automatically, depending on the operating mode selected, cameras (Server

and Server/Client) or NMS servers (Client) are searched for aftera list of found IP addresses appears in

the window along with the names and type of devices. The Refresh button repeats the search. Clicking

Next takes you to the next window that allows you to choose to share streams with other machines with

NMS installed (this applies when installing NMS as a Server or Server / Client). This option is not

available during installation in the Client mode. Pressing Next moves to the next window that allows

you to select the path and size of disk space for recording recordings (Server and Server / Client only).

In the wizard We choose whether we want our device to

be available on the network for other users.

Then we proceed to allocate disk space for the

redording streams.

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

17

NMS SETTINGS WIZARD

The last step is to add a new user. This is required to ensure operational safety and reduce the

likelihood of unauthorized changes to the system configuration.

Entering data (login and password) and pressing the Add button adds the account to the window

ADDED. If you enter the data incorrectly, you can delete the account from the list by clicking the

Delete button.

After adding the desired number of user accounts and pressing Next, the last wizard window

opens, allowing you to apply the settings and save them in the program configuration. To apply the

settings, the program automatically logs off the user and then displays the window to log in again. The

appropriate settings made while the Wizard is running will be applied when NMS is started .

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

18

WATCHDOG

4.2. NMS Management

Selecting the option NMS management from the main screen menu displays a submenu

containing tools helpful in working with the NMS application. Access to the submenu is protected by

a password.

4.3. WATCHDOG

Selecting Watchdog from the main screen menu displays the NWatch diagnostic screen

monitoring the operation of the NMS application. It contains the application status, resources used and

a list of logs.

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

19

MENU

• Restore configuration - restore saved configuration. restore saved configuration.

• Change mode Client/Server - change of operation mode to Client, Server, Client / Server

• Language - changing the language in the NMS application and in the home screen. Changing the

language requires restarting the NMS application

• Restart NMS - restarts the application .

• Close NMS - closes the application .

• Update - allows you to update the NMS software locally or via the Internet (requires internet

connection

• IPTool - tool for searching CCTV devices.

• Remote support - launches the Teamviewer application. For remote assistance, please provide the

displayed ID and password to Novus Technical Support.

• Help - displays the NMS software manual.

4.4. MENU - System congfiguration

Selecting System Settings from the main screen menu displays a submenu containing tools

useful for configuring the operating system. Access to the submenu is protected by a admin password

created at the beggining.

• Internet Explorer - opens Internet Explorer.

• Media player - launches the media player .

• Control Panel - opens Control Panel.

• Explorer - opens file explorer.

Manual for NMS-NVR X-2U and NMS-NVR X-4U - V1.0

20

CHANGING THE IP ADDRESS

• Disk management - runs a tool that allows you to view system disks, create partitions, and

change volumes

• System events - launches Microsoft Management Console (MMC), it contains administrative

tools that you can use to manage networks, computers, services, and other system components.

• Network - displays network settings.

• Date/Time - date and time settings. .

• Task manager - allows you to view programs, processes and services that are currently running

on your computer. You can use Task Manager to monitor computer performance or to close a

program that is not responding.

• Change password - allows you to change the system password and NMS application for the

default root user.

• CMD - starts a command line window.

4.4.1. CHANGING THE IP ADDRESS

To change the IP address from the system settings menu, select the network option. A window

will appear with available network connections. Right-click on the desired connection (1) and select

Properties (2) from the list. Select Internet Protocol Version 4 (TCP / IPv4) (3). Press the Proterties

button (4). In the newly displayed window, fill in the fields (5) IP address (IP address, Subnet mask),

Default gateway, Preffered DNS server, Alternate DNS server (6) and confirm by pressing the OK

button (7).

2

3

4

5

6

7

1

Strona jest ładowana ...

Novus NMS NVR X-2U/24 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Novus NMS NVR X-2U/24 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty