Novus NMS NVR 7-T-II Instrukcja obsługi

NMS NVR x-T-II

NMS NVR x-4U-II

NVSO x-T-II

NVSO x-4U-II

Start-up

guide

Manual for NMS-NVR and NVSO- V1.1

#

TERMS OF USE

To ensure stability and correct operation of the devices, they are sold as a whole. Making any

modifications described below is equivalent to tampering with the device by the User and forfeiting the

warranty. All damages resulting from the modification of the device by the User will be payable.

1. Do not enable, install, update operating systems installed on devices;

2. Do not enable, install, or update drivers for component components of devices;

3. Do not enable the Windows Firewall "Firewall", Windows Defender;

4. Do not install anti-virus software, firewalls etc.;

5. Do not install software provided by third parties;

6. Do not carry out repairs yourself;

7. Do not modify the units without the manufacturer's authorization;

8. Do not make copies of system disks to other media and move, modify or perform any other tasks

related to OS disks;

9. Do not modify the BIOS settings, such as "Overclocking", "RAID" redundancy, etc .;

10. Do not connec devices to internet without appropriate security hardware, exposing them to the

risk of malware installation ;

11. Do not update the motherboard Bios and other firmware of the other components of the unit;

12. Periodically clean all air inlets and outlets of the unit to maximize airflow;

13. Periodic maintenance of system should be made;

Manual for NMS-NVR and NVSO- V1.1

#

NOTES AND WARNINGS

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:

DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT

AND OF THE COUNCIL of 26 February 2014 on the harmonisation

of the laws of the Member States relating to the making available on the mar-

ket of electrical equipment designed for use within certain voltage limits.

DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIMENT

AND OF THE COUNCIL of 26 February 2014 on the harmonisation

of the laws of the Member States relating to electromagnetic compatibility

(OJ L 96, 29.3.2014, p. 79–106, with changes)

DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIA-

MENT

AND OF THE COUNCIL of 4 July 2012 on waste electrical

DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT

AND OF THE COUNCIL of 8 June 2011 on the restriction of the use

of certain hazardous substances in electrical and electronic equipment

(OJ L 174, 1.7.2011, p. 88–110, with changes)

Manual for NMS-NVR and NVSO- V1.1

#

WARNING!

THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A

PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE

YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER

DEVICE OPERATION.

WARNING!

USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO

USER-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE

PERSONNEL MAY OPEN THE UNIT

INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE

PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN

PRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE

PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE

PRODUCT, MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF

EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN

ACTION.

IMPORTANT SAFEGUARDS AND WARNINGS

1. Prior to undertaking any action please consult the following manual and read all the safety and

operating instructions before starting the device.

2. Please keep this manual for the lifespan of the device in case referring to the contents of this manual

is necessary;

3. All the safety precautions referred to in this manual should be strictly followed, as they have a

direct influence on user’s safety and durability and reliability of the device;

4. All actions conducted by the servicemen and users must be accomplished in accordance with the

user’s manual;

5. The device should be disconnected from power sources during maintenance procedures;

6. Usage of additional devices and components neither provided nor recommended by the producer

is forbidden;

7. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers

etc.) is not recommended since it may lead to heat build-up and damaging the device itself

as a consequence;

8. Mounting the camera on unstable surface or using not recommended mounts is forbidden.

Improperly mounted camera may cause a fatal accident or may be seriously damaged itself. The

camera must be mounted by qualified personnel with proper authorization, in accordance with this

user’s manual;

SAFETY CONDITIONS

Manual for NMS-NVR and NVSO- V1.1

#

SAFETY CONDITIONS

9. Device should be supplied only from a power sources whose parameters are in accordance with those

specified by the producer in the camera technical datasheet. Therefore, it is forbidden to supply the

camera from a power sources with unknown parameters, unstable or not meeting producer’s

requirements;

10. Signal cables (conducting TV or / and telemetric signal) should be placed in a way excluding the

possibility of damaging them by accident. Special attention must be paid to cables getting from the

camera and connecting the power supply;

11. To avoid equipment damage, whole TV circuit should be equipped with properly made

discharge-, overload- and lightning protection devices. Usage of separating transformers is advised;

12. Electric installation supplying the device should be designed to meet the specifications given

by the producer in such a way that overloading is impossible;

13. User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should

be conducted only by qualified service personnel;

14. Unplug the camera from the power source immediately and contact the proper maintenance

department when the following occurs:

 Damages to the power cord or to the plug itself;

 Liquids getting inside the device or exposure to strong mechanical shock;

 Device behaves in a way not described in the manual and all adjustments approved by the

manufacturer and possible to apply by user himself, seem not to have any effect;

 Camera is damaged;

 Atypical behaviour of the camera components may be seen (heard).

15. In necessity of repairs attention to using only original replacement parts (with their parameters

in accordance with those specified by the producer) should be paid. Non-licensed service and non

-genuine replacement parts may cause fire or electrocution;

16. After maintenance activities tests should be run to ensure proper operation of all the functional

components of the device.

WARNING!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN

PRODUCT IN

USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT

DOES

NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST

BE

CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S

RESPONSIBILITY FOR

THE RESULTS OF SUCH AN ACTION

Manual for NMS-NVR and NVSO- V1.1

#

I. OVERALL CHARACTERISTICS

1. BOX CONTENT

Każda z opisywanych jednostek powinna posiadać:

• Main Unit

• Power cord

• Keyboard and mouse

• Manual

ATTENTION !!!

Before starting installation of main unit please check the contents of the kit with the above list. If any

discrepancies are found, the installation should be abandoned and the distributor contacted. .

2. SPECIFICATION

The table below presents the differences between NMS NVR and NVSO workstations.

Other parameters of the units are identical. .

ATTENTION!!!

To support more than two monitors, it is necessary to use the Display Port output.

An additional license key is required to support more than 1 RTSP channel and 1 ONVIF channel.

INTRODUCTORY INFORMATION

Unit OS Unit OS

NMS NVR 3-4U-II Windows 10 IoT NVSO 3-4U-II Windows 10 Pro

NMS NVR 3-T-II Windows 10 IoT NVSO 3-T-II Windows 10 Pro

NMS NVR 5-4U-II Windows 10 IoT NVSO 5-4U-II Windows 10 Pro

NMS NVR 5-T-II Windows 10 IoT NVSO 5-T-II Windows 10 Pro

NMS NVR 7-4U-II Windows 10 IoT NVSO 7-4U-II Windows 10 Pro

NMS NVR 7-T-II Windows 10 IoT NVSO 7-T-II Windows 10 Pro

Manual for NMS-NVR and NVSO- V1.1

#

2.1 NMS NVR 3-4U-II

SPECIFICATIONS

Video

IP Camera Recording 100 channels at 1920x1080 (video+audio) using H.264 codec

140 channels at 1920x1080 (video+audio) using H.265 codec

Maximum Supported Camera Resolution 4000x3000

Supported Codes H.264, H.264+, H.265, H.265+, MJPEG

Supported Cameras and Protocols Novus, Novus fisheye, ONVIF, ONVIF fisheye, RTSP, RTSP fisheye

Dualstreaming Support yes

Display

Monitor Output 1 x HDMI 2.0b, 1 x Display Port 1.2, 1 x Dual link-DVI (up to 3 monitors simultaneously)

Maximum Resolution 3 x 4K UltraHD

Audio

Audio input 1 x Line in (3,5mm), 1 x Mic in(3,5mm)

Audio Output 1 x Line output (3,5mm), 1 x HDMI, 1 x Display Port

Audio Input/Output in Cameras Supports audio input/output build in cameras

Performance - H.264

2MPX IP Camera Recording up to: 100 main streams (while displaying: 8 sub streams)

Display up to: 42 sub streams or 13 main streams (while recording: 42 main streams)

Playback up to: 13 main streams (while recording: 42 main streams)

4MPX IP Camera Recording up to: 65 main streams (while displaying: 8 sub streams)

Display up to: 40 sub streams or 7 main streams (while recording: 40 main streams)

Playback up to: 7 main streams (while recording: 40 main streams)

5MPX IP Camera Recording up to: 60 main streams (while displaying: 8 sub streams)

Display up to: 35 sub streams or 5 main streams (while recording: 35 main streams)

Playback up to: 5 main streams (while recording: 35 main streams)

8MPX IP Camera Recording up to: 36 main streams (while displaying: 8 sub streams)

Display up to: 32 sub streams or 3 main streams (while recording: 32 main streams)

Playback up to: 3 main streams (while recording: 32 main streams)

12MPX IP Camera Recording up to: 32 main streams (while displaying: 8 sub streams)

Display up to: 26 sub streams or 3 main streams (while recording: 26 main streams)

Playback up to: 3 main streams (while recording: 26 main streams)

Performance - H.265

2MPX IP Camera Recording up to: 140 main streams (while displaying: 8 sub streams)

Display up to: 30 sub streams or 6 main streams (while recording: 30 main streams)

Playback up to: 6 main streams (while recording: 30 main streams)

4MPX IP Camera Recording up to: 90 main streams (while displaying: 8 sub streams)

Display up to: 30 sub streams or 3 main streams (while recording: 30 main streams)

Playback up to: 3 main streams (while recording: 30 main streams)

5MPX IP Camera Recording up to: 70 main streams (while displaying: 8 sub streams)

Display up to: 30 sub streams or 3 main streams (while recording: 30 main streams)

Playback up to: 3 main streams (while recording: 30 main streams)

8MPx IP Camera Recording up to: 60 main streams (while displaying: 8 sub streams)

Display up to: 28 sub streams or 2 main streams (while recording: 28 main streams)

Playback up to: 2 main streams (while recording: 28 main streams)

12MPX IP Camera Recording up to: 48 main streams (while displaying: 8 sub streams)

Display up to: 20 sub streams or 2 main streams (while recording: 20 main streams)

Playback up to: 2 main streams (while recording: 20 main streams)

Manual for NMS-NVR and NVSO- V1.1

#

SPECIFICATIONS

Recording

Recording Mode Continuous, Schedule, Panic, Triggered: manually, by alaram input, motion detection, video analysis, POS,

temerature alarm

Schedule individual settings for: each camera, each day of the week, specific days (holidays etc.), configuration with

an accuracy of: 15 min, possibility of combining individual recording modes

Prealarm/Postalarm Up to: 30s / Up to: 600s

Playback

Recorded Data Search By Date/Time, Events, “Text-in”

Backup

Backup Methods USB port (HDD lor Flash drive), Network

Backup File Format JPEG, BMP, AVI, NMS

HDD

Internal storage for system 1 x HDD 3.5" SATA

Internal Storage for Recording 5 avalible bays for 3,5" HDD surviliance grade storage media

Alarms

Alarm Input/output in cameras Support of alarm input and output built in cameras

Motion detection Support of motion detection built in cameras

Video Analytics Supported built in analytics in camera

Temperature alarm Support of temperature alarm built in cameras

Licence plate recognition (LPR) Support of selected image analysis functions available in the camera

System Reactions to Alarm Events e-mail, Screen Message, Recording Activation, PTZ

Network

Network Interface 1 x Ethernet - RJ45 interface, 10/100/1000 Mbit/s

up to 350Mbit/s from all cameras,

up to 350Mbit/s to all client stations,

Max network throughput: 350Mbit/s for each network card

Network Protocols Support HTTP, TCP/IP, IPv4/v6, UDP, HTTPS, FTP, DHCP, DNS, DDNS, NTP, RTSP, SAMBA

Compatible Mobile Applications NMS Mobile

PTZ

PTZ Functions pan, tilt, zoom, preset commands, patterns, tours, auto-scans, focus, iris

Additional interfaces

USB Ports 6 x USB 3.0

Operating System

Operating System Microsoft Windows 10 IoT

Recording and Surveillance System NMS (Novus Management System)

Additional Software Internet Explorer

Operation Mode Pentaplex

OSD Polish, English, Russian, others

Control PC mouse and keyboard (in-set included), DCZ keyboard

System Diagnostic automatic control of: HDDs, Temperature, Fan, Network, Camera connection loss

Security Password protection, IP filtering, MAC filtering, Limiting the number of connections

Integration

Integrated Devices Novus IP Cameras, Novus IP Recorders, Novus AHD Recorders, NMS-ANPR Software, DSC Systems,

POS Systems (Posnet, Upos and other), ONVIF Devices, RTSP Devides

Installation Parameters

Dimensions 427mm (W) x 177mm(H) x 450mm (D)

Weight 20 kg (without HDDs for recording)

Power Supply built in 700W, with 230VAC input

Power consumption/heatprint 350W/280W (without HDD for recording)

Operating Temperature 5°C ~ 35°C

RACK Mount 19" 4U

Manual for NMS-NVR and NVSO- V1.1

#

2.2 NMS NVR 3-T-II