Sage SES881BSS4FEU1 instrukcja

the User Guide

B###### / S######

EN USER GUIDE

FR GUIDE UTILISATEUR

IT MANUALE UTENTE

PT MANUAL DO UTILIZADOR

DE HANDBUCH

NL HANDLEIDING

ES GUÍA DEL USUARIO

PL INSTRUKCJA OBSŁUGI

BES881 / SES881

the Barista Touch™ Impress

2

Contents

SAGE®

RECOMMENDS

SAFETY FIRST

At Sage® we are very safety

conscious. We design and

manufacture consumer

products with the safety of

you, our valued customer,

foremost in mind. In addition,

we ask that you exercise a

degree of care when using

any electrical appliance

and adhere to the following

precautions.

IMPORTANT

SAFEGUARDS

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE FOR

FUTURE REFERENCE

• A downloadable version of

this document is also available

at sageappliances.com.

• Remove and discard

any packaging materials

safely before use.

• Ensure the product is properly

assembled before rst use

and fully unwind the power

cord before operating.

• Before using for the rst

time, please ensure that your

electricity supply is the same as

shown on the rating label on the

underside of the appliance

(220-240 V ~ 50-60 Hz

1430-1700 W). If you have any

concerns, please contact your

local electricity company.

• The installation of a residual

current safety switch is

recommended to provide

additional safety when using

all electrical appliances.

Safety switches with a rated

operating current not more

than 30mA are recommended.

Consult an electrician for

professional advice.

2 Sage® Recommends Safety First

6 Features

7 Components

9 Assembly

10 Functions

20 Care & Cleaning

24 Troubleshooting

25 Guarantee

3

EN

• Regularly inspect the power

cord, plug and actual appliance

for any damage. If found to

be damaged in any way,

immediately cease use of

the appliance, and return the

entire appliance to the nearest

authorised Sage Service

Centre for examination,

replacement, or repair.

• Do not let the power cord

hang over the edge of a

counter or table. Do not let

the power cord touch hot

surfaces or become knotted.

• Do not touch hot surfaces.

Always ensure the appliance

has been allowed to cool;

if the appliance is to be: left

unattended, cleaned, moved,

assembled or stored, or when

changing accessories; always

switch o the espresso machine

by pressing the POWER

button to OFF. Switch o and

unplug from the power outlet.

• Children must not play with

the appliance. Do not leave

the appliance unattended

when in use. Do not move the

appliance whilst in operation.

• This appliance can be used

by children aged from 8 years

and above, and by persons

with reduced physical, sensory,

or mental capabilities or lack

of experience and knowledge

if they have been given

supervision or instruction

concerning use of the appliance

in a safe way and understands

the hazards involved. Cleaning

and user maintenance shall

not be made by children unless

they are older than 8 and

supervised. Keep the appliance

and its cord out of reach of

children aged less than 8 years.

• To eliminate a choking hazard

for young children, discard

the protective cover tted

to the power plug safely.

• Position the appliance on a

stable, heat resistant, level, dry

surface away from the counter

edge, and do not operate on

or near a heat source such as

a hot plate, oven, or gas hob.

• Do not operate the appliance

in an enclosed space,

or inside a cupboard.

• Do not use attachments

other than those provided

with the appliances. The

use of attachments not

sold or recommended

by Sage® may cause re,

electric shock, or injury.

• This appliance is for household

use only. Do not use the

appliance for anything other

than its intended purpose.

Do not use in moving vehicles

or boats. Do not use outdoors.

Misuse may cause injury.

4

• Servicing should only be

performed by an authorised

service representative.

• Improper use of the appliance

incorrectly operated or

unprofessionally repaired. In

such a case, any warranty claim

is void. No warranty claim for

any damages can be accepted.

• The appliance is not intended

to be operated by means of

an external timer or separate

remote-control system.

• Use caution when operating

machine as metal surfaces

are liable to get hot during use.

Heating element is subject

to residual heat after use.

• Do not put ngers into the

tamping chute when pushing

down the tamping lever.

• Do not open the

programming port, this is

exclusively for authorised

service personnel only.

• Do not operate the grinder

without the hopper lid in

position. Keep ngers,

hands, hair, clothing, and

utensils away from the

hopper during operation.

• Do not ll water tank

with hot water.

• Never use the appliance without

water in the water tank.

• Wipe the outer surface with

a soft, damp cloth and then

polish with a soft, dry cloth.

Keep the appliance and

accessories clean. Follow the

cleaning instructions provided.

CAUTION

To prevent damage to

the appliance, do not use

alkaline cleaning agents

when cleaning, use a soft

cloth and a mild detergent.

The symbol shown

indicates that this appliance

should not be disposed

of in normal household waste.

It should be taken to a local

authority waste collection centre

designated for this purpose or

to a dealer providing this service.

For more information, please

contact your local council oce.

To protect against electric

shock, do not immerse

the power cord, power plug or

appliance in water or any other

liquid.

5

EN

NOTICE TO CUSTOMERS

REGARDING MEMORY

STORAGE SAVE THESE

INSTRUCTIONS

Please note that in order to better

serve our customers, internal

memory storage has been

imbedded into your appliance.

This memory storage consists

of a small chip to collect certain

information about your appliance

including the frequency of use

of the appliance and the manner

in which your appliance is being

used. In the event your appliance

is returned for service, the

information collected from the

chip enables us to quickly and

eciently service your appliance.

The information collected also

serves as a valuable resource

in developing future appliances

to better serve the needs of

our consumers. The chip does

not collect any information

regarding the individuals

who use the product or the

household where the product is

used. If you have any questions

regarding the memory storage

chip please contact us at

priv[email protected]

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

SPECIFIC INSTRUCTIONS

FOR WATER FILTER

• Filter cartridge should be kept

out of reach of children.

• Store lter cartridges in a dry

place in the original packaging.

• Protect cartridges from

heat and direct sunlight.

• Do not use damaged

lter cartridges.

• Do not open lter cartridges.

• If you are absent for a prolonged

period of time, empty the water

tank and replace the cartridge.

6

Features

RAPID HEAT UP

Innovative heating system achieves ideal

extraction temperature in 3 seconds.

PRECISION CONICAL BURR GRINDER

Precision conical burrs maximise ground coee

surface area for a full espresso avour.



Swipe & select from the drink’s menu. Receive

guidance throughout the whole coee making

process so you can enjoy a perfect cup of

coee. Adjust your shot volume, milk texture or

milk temperature, then save it as your personal

favourite.

ADJUSTABLE GRIND SIZE

Espresso grind settings from ne to coarse

for optimal extraction.

ADJUSTABLE GRIND AMOUNT

Adjust the amount of fresh ground coee

dosed into the lter basket to suit the neness

or coarseness of the grind.

PID TEMPERATURE CONTROL

Electronic PID temperature control for increased

temperature stability.

DEDICATED HOT WATER SPOUT

Dedicated hot water outlet for making long

blacks, teas, and pre-heating cups.

LESS MESS

The portalter remains secure in the same

position as you grind, dose and tamp, reducing

any potential grinds mess on your drip tray and

bench top.

THE BARISTA TOUCH™

IMPRESS PUCK SYSTEM

Simplies the steps needed to grind, dose, and

tamp to create an impressive puck. Less mess.

Less fuss.

• Precision Measurement Auto Corrects

the Next Dose

Grind measurement displayed on screen

indicates when correct level is achieved, and the

system automatically remembers the adjustment

for the next dose.

Correct dose level is calculated based on

measured grind amount.

• Assisted Tamping with a 7° Barista Twist

Finish

Precise 10kg impression with a professional

7 degree barista twist for a polished puck.



MILK TEXTURING

Automatically textures milk to the selected

temperature and style from silky smooth latté

to creamy cappuccino. Choose your preferred

milk type to optimize your milk results for dairy,

almond, soy and oat milk. Automatic purge

removes residual milk from the steam wand

once texturing is complete.

7

EN

Components

Rating Information

220-240 V ~ 50-60 Hz 1430 - 1700 W

A. 340g Bean Hopper

B. Touch Screen

C. Power Button

D. Tamp Lever

E. Grind Size Adjustment Dial

F. Removable Tamp Cover

G. Grinding Cradle

H. Group Head

I. Hot Water Spout

J. 54mm Stainless Steel Portalter

K. Steam Wand

L. Drip Tray Grill

M. Milk Temperature Sensor

N. Drip Tray

NOT SHOWN

• 2 L Removable Water Tank

• Tool Storage Tray

• Power Cord Storage

A

B

C

D

E

F

H

I

GK

J

LM

N

8

B

H

C

D

A

G

F

E

I

J

K

L

M

ACCESSORIES

A. Stainless Steel Milk Jug

B. 1 cup & 2 cup Single Wall Filter Baskets

C. 1 cup & 2 cup Dual Wall* Filter Baskets

D. 54mm Stainless Steel Portalter

E. Water Filter Holder With Filter

F. Cleaning Disc

G. Cleaning Tablets

H. Cleaning Brush

I. The Razor™ precision dose trimming tool

J. Descale Powder

K. Cleaning Tool For Steam Wand Tip

L. Water Hardness Strip

M. Drip Tray Guard

(included with machines in colour only)

* 2 cup dual wall lter basket comes

installed in the portalter

9

EN

Assembly

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging

materials attached to your espresso machine.

Ensure you have removed all parts and

accessories from the box before discarding

the packaging.

Remove the water tank located at the back of

the machine by pulling the water tank handle.

Clean parts and accessories (water tank,

portalter, lter baskets, jug) using warm water

and a gentle dish washing liquid. Rinse well

then dry thoroughly.

NOTE

Machines with colour, drip tray protection guard

is included. DO NOT DISCARD.

INSTALLING THE WATER FILTER

• Remove the water lter and water lter holder

from the plastic bag.

• Soak the lter in cold water for 5 minutes.

• Rinse the lter holder with cold water.

• Set the reminder for next month of replacement.

We recommend to replace the lter after 3

months.

• Insert the lter into the two parts of the lter

holder.

• To install the assembled lter holder into the

water tank, align the base of the lter holder with

the adapter inside the water tank. Push down

to lock into place.

NOTE

Replacing the water lter every three months will

reduce the need to descale the machine. Filters

can be purchased at www.sageappliances.com

NOTE

If your water hardness is either 4 or 5 when

tested, we strongly recommend you to change

to an alternate water source. Filtered water will

extend both the life of your built-in lter and

descale intervals as well as superior taste.

Please ensure to test the water hardness of

the alternative water source you’ve chosen and

input into the machine accordingly. Avoid using

overly ltered water, like RO water unless some

mineral content is being added back to the nal

water. Never use distilled water, or water with no

or low mineral content as this will aect the taste

of coee.

10

Attaching the Hopper

• Insert the bean hopper into position on top

of the machine.

• Turn the dial to lock the hopper into place.

• Fill the hopper with fresh beans.

TIP

We recommend quality 100% Arabica beans

with a ‘Roasted On’ date stamped on the bag,

not a ‘Best Before’ or ‘Use By’ date. Coee

beans are best consumed between 5–20 days

after the ‘Roasted On’ date. Stale coee may

pour too quickly from the portalter spouts and

taste bitter and watery.

Attaching the Drip Tray

• Place the drip tray grill on top of the drip tray.

• Machines with colour, attach the drip tray

protection guard cover on the drip tray.

• Slide the drip tray into the machine.

NOTE

Using the drip tray protection guard cover

is optional. But note that using the drip tray

protection guard can protect your drip tray from

dents and scratches.

Filling the Water Tank

• Ensure the water lter is securely tted inside

the water tank.

• Use the handle at the top of the water tank

to assist in lifting the water tank and away from

the machine.

MAX

• Fill the water tank with cold potable tap water

up to the MAX marking indicated on the side

of the water tank.

• Replace the water tank back on the machine,

pressing down to ensure that it is properly

positioned and attached to the machine.

MAX

NOTE

If the water level in the water tank is below the

minimum (MIN) marking, the espresso machine

will not operate.

Functions

11

EN

GENERAL OPERATION

• Check the water tank is lled with cold tap water

up to the maximum mark.

• Plug the power cord into the power outlet.

• Press the ‘Power’ button.

• Follow the instructions on screen to guide you

through rst use setup.

DRINK SELECTION

Swipe and select your choice of drink.

NOTE

Please keep the touch screen dry and clean

to ensure that the machine functions properly.

DRINK SCREEN

In this screen, you can customise your drink

by touching the choice of drink on screen.

A. Home icon

B. Chosen drink

C. Hot water

D. Grind / Dose = tap the icon below the

portalter to adjust grinder settings.

E. Brew = tap the icon below the coee glass

to adjust brewing settings.

F. Milk texture = tap the icon below the milk

jug to adjust milk settings.

SETTING THE GRIND

SIZE AND DOSING

• Adjust the grind size by using the dial on the side

of the machine.

• Follow the screen prompts to select the preferred

‘Basket Size’.

• Tap on the portalter image to start the grinding

and allow fresh ground coee to ll the portalter.

A B C

D E F

12

• Grinding will automatically stop.

INTELLIGENT BREW SETUP

Intelligent Brew Setup is a feature that helps

achieve a good coee extraction range by

assisting the dial-in process of the grinder.

When successfully completed, you can enjoy

a balanced coee shot.

From this point, further adjust grind size and

experiment to suit your style.

It is recommended using this feature whenever

you change beans, or the too fast or too slow

notications are shown on screen.

Find the Intelligent Brew Setup in the Settings

menu under Drinks Settings.

MANUAL GRIND PURGE

For best coee results, if the machine has not

been used for a while it is recommended to

purge any stale beans that have been ground

and left in the grinder chute.

To purge; tap and hold the grind button for

2 seconds, and run for around 5 seconds.

To stop; press the stop button. Grind purge

will stop automatically after 30 seconds if stop

button is not pressed.

ASSISTED TAMPING

• When grind cycle is completed, the machine

is ready to tamp.

ASSISTED TAMPING

• When grind cycle is completed, the machine is

ready to tamp.

• Push the lever downwards to the end position.

This will tamp the coee grinds in the portalter

using a consistent amount of tamp force. Pushing

the lever slowly and consistently will help to

improve the puck appearance.

• Release the lever slowly upwards to the home

position after tamping.

• Repeat the tamping action as above twice.

NOTE

Screen will indicate if tamp or dose is low, ideal

or high.

HOW TO CORRECT AN

UNDER OR OVER DOSE?

An under or over dose can occur when fresh

beans are added to the hopper; when coee

beans age; a dierent type of coee bean is

used or if a change is made to the grind size.

What to do when dose level is

below the ideal middle bar?

• When dose is below the ideal middle bar, the

machine will indicate and calculate ‘A Bit More’.

Tap the portalter image on screen to add a bit

more and follow screen prompts and complete

a tamp for an updated dose level reading.

• When ideal dose level is reached, the machine

will automatically update the auto dose time for

the next cycle.

What to do when dose level is above

the ideal middle bar?

• When dose is above the ideal middle bar, remove

the portalter from the cradle.

• Use the Razor Trimming Tool. (refer to Trimming

the Dose section).

13

EN

• The machine will calculate how much to reduce

the auto grind time and apply this for the next

cycle.



Precision dose trimming tool

The Razor™ precision dose trimming tool

allows you to trim the puck to the right level

for a consistent extraction.

Insert the Razor™ into the coee basket until

the shoulders of the tool rest on the rim of the

lter basket. The blade of the dosing tool should

penetrate the surface of the tamped coee.

Rotate the Razor™ dosing tool back and forth

while holding the portalter on an angle over

the knock box to trim o excess coee.



Place the portalter underneath the group head

so that the handle is aligned with the INSERT

position. Insert the portalter into the group

head and rotate the handle towards the centre

until resistance is felt.

ESPRESSO EXTRACTION

• Select a display of brew options on the screen.

• Select the café size options from:

Single (approx.30ml), Double (approx.60ml) or

Double+ (approx.90ml).

• Select Custom and slide and drag the dot to

increase or decrease the coee volume.

• Tap the coee cup image on the screen to start

extraction.

• The duration times are preset but can be

customised.

MANUAL OVERRIDE

Press and hold the coee image (approx

2 seconds) to enter manual extraction mode.

Touch the coee image to start the extraction,

touch the coee image again to stop the

extraction.

NOTE

• The amount of espresso extracted in the cup

will vary depending on your grind size and grind

amount settings.

• Touching the coee image during a preset shot

volume will immediately stop the extraction.

• For optimal avour when using a 1 CUP lter

basket, you should extract approx. 30ml. When

using a 2 CUP lter basket, you should extract

approx. 60ml.

TEXTURING MILK

Dierent brands and milk alternatives will

texture dierently. For best texturing results it

is recommended to use full cream milk when

using dairy milk and use barista type milks

when using plant-based milks. You may need to

adjust the froth level accordingly. Start with cold

milk. Fill milk jug to below the spout position. Lift

14

the steam wand and insert into milk jug. Lower

steam wand, ensuring it is fully down. The milk

jug should rest on the milk temperature sensor

located on the drip tray and tip of the steam

wand should be submerged and ensure that

milk covers the ring around the steam wand tip.

MAX

MIN

MILK MUST

COVER

THIS RING

NOTE

Check the image on the screen for the correct

milk jug position.

Under the milk jug image, tap the icon to adjust

the milk temperature, the level of milk froth

or change your milk option: Dairy, Almond,

Oat or Soy.

To start, touch the ‘Milk jug’ image. The screen

will display the temperature of the milk as

it heats.

Milk texturing will stop automatically when

the selected milk temperature is reached.

Lift steam wand to remove milk jug. Wipe the

wand and tip with a clean damp cloth. Lower

steam wand to the down position and the wand

will automatically purge.

MANUAL MILK TEXTURING

Auto milk texturing and auto shut-o are

disabled during manual milk texturing mode.

Start with a cold milk. Fill milk jug to below the

spout position. Lift the steam wand and slide the

milk jug under the steam wand. Hold the milk jug

at an angle.

Start frothing by tapping the milk jug image on

screen. When frothing is done and the jug is hot

to comfortably touch; tap the milk jug image on

screen to stop.

Wipe the wand & tip with a clean damp cloth.

Lower steam wand to the down position and

the wand will automatically purge.

CAUTION: BURN HAZARD

Pressurised steam can still be released, even

after machine has been switched o. Children

must always be supervised.

NOTE

• When the machine creates steam, a pumping

noise can be heard. This is the normal operation

of the pump.

• Use exclusively the stainless steel milk jug

included in the pack to froth milk. The use

of container made of glass or plastic material

to froth milk may lead to overheating milk

or dangerous conditions.

USING HOT WATER

The machine has a dedicated hot water spout.

The HOT WATER function can be used to pre-

heat cups or add hot water manually. To start

and stop hot water, touch ‘Hot Water’ icon on

the screen.

Hot water limit is approximately 90 seconds.

Depending on the size of your cup, you may

need to touch the ‘Hot Water’ button to stop

pouring.

NOTE

Using the hot water spout and the steam wand

is not possible when extracting espresso.

Run hot water before or after extracting

espresso.

15

EN

WARNING

Filled cup temperature is approximately 75°C -

90°C (167°F - 194°F). Be careful in handling hot

beverages.

TIP

Heating your cup or glass

A warm cup will help maintain the coee’s

optimal temperature. Pre-heat your cup by

rinsing with hot water from the hot water outlet

and place on the cup warming tray.



A cold portalter and lter basket can

reduce the extraction temperature enough to

signicantly aect the quality of your espresso.

Always ensure the portalter and lter basket

are pre-heated with hot water from the hot water

spout before initial use.

NOTE

Always wipe the portalter and lter basket dry

before dosing with ground coee as moisture

can encourage ‘channeling’ where water by-

passes the ground coee during extraction.

FILTER BASKETS

This machine includes both single and dual

wall, 1 cup and 2 cup lter baskets.

Use the 1 cup lter basket when brewing

a single cup and the 2 cup lter baskets when

brewing 2 cups or a stronger single cup or mug.

The provided lter baskets are designed for

ground coee:

1 cup lter basket = 8-11g

2 cup lter basket = 16-19g

Single Wall Filter Baskets

1 CUP 2 CUP

Single Wall lter baskets should be used when

grinding fresh whole coee beans.

These allows you to experiment with grind and

dose to create a more balanced espresso.

Dual Wall Filter Baskets

1 CUP 2 CUP

Dual Wall lter baskets should be used when

using pre-ground coee and older beans that

are past the 30-day roast date.

These regulate the pressure and help to

optimize the extraction regardless of the grind,

dose, or freshness.

THE GRIND

Adjusting the Grind Size

The grind size will aect the rate of water ow

through the coee in the lter basket and the

avour of the espresso. When setting the grind

size, it should be ne but not too ne and

powdery.

16

To adjust the grind, rotate the grind dial to the

back of the machine to go coarser, or rotate

the dial towards the front of the machine to go

ner or slide the dot on the screen to the left for

a ner grind or to the right for a coarser grind.

The smaller the value shown on screen, the

ner the grind size. The larger the value shown

on screen, the coarser the grind size.

NOTE

• When making changes to the grind size, the new

auto dosing time will be calculated after your next

tamp and updated for the dose cycle following

that. The dose amount is calculated and stored

automatically. Two to three extractions may be

required to calibrate the extraction.

• For most bean varieties, the grinder will pause

the grind operation when coee beans ran out.

Extracting Espresso

• As a guide, the espresso will start to ow after

8-12 seconds (infusion time) and should be the

consistency of dripping honey.

• If the espresso starts to ow before 7 seconds

you have either under dosed the lter basket and/

or the grind is too coarse. This is an UNDER-

EXTRACTED shot.

• If the espresso starts to drip but doesn’t ow after

12 seconds, then you have either over dose the

lter basket and/or the grind is too ne. This is an

OVER-EXTRACTED shot.

A great espresso is about achieving the perfect

balance between sweetness, acidity, and

bitterness.

The avour of your coee will depend on many

factors, such as the type of coee beans,

degree of roast, freshness, coarseness or

neness of the grind, and the dose of ground

coee.

Experiment by adjusting these factors just one

at a time to achieve the taste of your preference.

HOW TO ADD & DELETE

CUSTOMISED DRINKS

Adding A New Drink

When customising a default drink, tap the disc

icon on the upper right of the screen to rename

and save newly created coee settings. Name

the new drink with a maximum of 15 characters.

Every created drink is saved to the start of the

drink carousel.

17

EN

Editing Or Deleting A Saved Drink

Select the name of the saved drink and tap and

hold the coee image for three seconds and

select either ‘Edit’ or ‘Delete’ from the screen.

Press ‘Yes’ to conrm or ‘No, cancel’ to return

to the drink carousel screen.

SETTINGS

To enter settings menu, touch the icon on the

upper right of the screen.

MAINTENANCE

Clean Steam Wand – This will show how to

clean the steam wand to remove any blockage

for better steaming performance.

Group Head Cleaning – This will need

Espresso cleaning tablet or powder and will take

10 minutes to complete.

Grinder Cleaning – Follow step-by-step

process to clean the grinder to help the grinder

running in its optimal capacity and avoid

possible blockages.

Descale – Descaling prevents excess mineral

and scale build-up. A pop-up message will let

you know when it is time for descaling.

Water Filter Change – To ensure machine has

clean water to use.

DRINK SETTINGS

Intelligent Dose – To turn on or o ‘Intelligent

Dosing’ that measures the dose and enables

the intelligent brewing calibration feature.

Default Milk – List of dierent kinds of milk

and select the desired milk default.

– Machine will guide you on

screen, step by step to make an actual coee.

OTHER

– List of the machine notication

alerts.

Guidance Tips – To turn on and o the

guidance tip animations on the drink screen.

Date & Time – To help set the date and time

on the machine.

Units – To switch between imperial and metric

units.

Help – Online help information screen with

QR Code.

Language – To set the machine’s language.

Demo mode – For on-screen Barista Touch™

Impress demonstration sequence.

About Appliance –To show model number

and rmware version of the machine.

Factory Reset – Use this function to reset

all programmable values back to the factory

settings and delete all custom drinks.

18

ADJUSTING CONICAL BURRS

Some types of coee may require a wider grind range to achieve an ideal extraction or brew.

A feature of your Barista Touch™ Impress is the ability to extend this range with an adjustable upper

burr. We recommend making only one adjustment at a time.

1

Unlock hopper

Align hopper

into position

6

Remove

upper burr

7

Remove wire handle

from both sides of the

burr

8

Move adjustable top

burr, 1 number,

coarser or ner

9

Align the number with

the handle opening

10

Insert wire handle

from both sides of the

burr

11

Push upper burr

rmly into position

12

Lock upper burr

14

Lock the hopper and

ll the hopper with

beans.

15

Check your extraction

2

Hold hopper over container & turn dial to

release beans into container

5

Remove hopper

3

13

Align hopper

into position

4

Run grinder until empty

19

EN

COLOUR TOUCH SCREEN DISPLAY

Please keep the touch screen dry and clean

to ensure that the machine functions properly.

REPLACING THE WATER

FILTER IN THE WATER TANK

4

Set date 3 months

ahead Soak water lter

for 5 mins

2 3

Place lter into lter

holder

5

Install lter in

water tank Fill water tank to

MAX mark

6

Insert & lock

water tank

5m

H20

I

N

O

U

T

1

MAX

The provided water lter helps reduce the risk

of scale build-up in and on many of the inner

functioning components. Replacing the water

lter every three months will reduce the need to

descale the machine. If you live in a hard water

area, it is recommended to change the water

lter more frequently.

• Remove the lter from the plastic bag, and soak

in a cup of water for 5 minutes.

• Rinse the lter under cold running water for

5 seconds.

• Insert the lter into the lter holder.

• Set the date dial 3 months ahead.

• To install, push down the lter to lock into place.

NOTE

For replacement of water lters contact Sage

Customer Service Centre or visit our website

at www.sageappliances.com.

CLEANING CYCLE

There will be a message prompt when

a cleaning cycle is required. This is a back-

ushing cycle and is separate from descaling.

Follow the instruction on the screen.

WARNING

After regular use, hard water can cause mineral

build up in and on many of the inner functioning

components, reducing the brewing ow, brewing

temperature, power of the machine, and taste of

the espresso.

DESCALING

Even with the provided water lter, it is

recommended to descale if there is scale build-

up in the water tank.

Go to ‘Settings’ and select ‘Descale cycle’.

Follow the instructions on the screen.

NOTE

Ensure that the water lter is removed from the

water tank before adding the descaling powder

when descaling the machine.

• While the cleaning cycle is important for keeping

the brew head clean from coee oils; the

descaling cycle is essential to ensure that the

machine is kept clean on the inside and free from

mineral build-up.

• Do not use bottled water when descaling. Most

bottled water may contain dissolved solids that

can leave deposits inside the machine.

Care &

Cleaning

20

CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results.

SLOWER

EXTRACTION

FASTER

EXTRACTION

1

Unlock hopper

2

Empty hopper

3

Replace hopper

4

Lock hopper

5

Run grinder

until empty

6

Unlock hopper

7

Remove hopper

8

Unlock top burr

9

Remove top burr

10

Clean top burr

with brush

11

Clean lower burr

with brush

12

Remove

tamp cover

13

Clean the chute

with brush

14

Replace

tamp cover

ADVANCED CLEANING FOR THE CONICAL BURR GRINDER

This step is only required if there is a blockage between the grinding burrs and the grinder outlet.

9

1

Remove hopper

2

Set GRIND SIZE

to 1 (nest)

LOOSEN NUT

3

Use 10mm socket.

Rotate clockwise to

loosen the nut only

4

Set GRIND SIZE

to 25 (coarsest)

5

Unlock & remove top

burr

SPRING

WASHER

FLAT

WASHER

6

Remove nut,

spring & at washer.

Carefully remove lower

burr.

3

2

1

1. GRIND FAN

2. METAL WASHER

3. FELT WASHER

7

Remove grind fan &

washers using

long-nose pliers

8

Unblock the grinds

exit chute using the

brush or a pipe

cleaner

Remove

tamp cover

10

Clean the chute with

brush

11

Replace

tamp cover

1

2

3

1. FELT WASHER

2. METAL WASHER

3. GRIND FAN

12

Insert washers

& grind fan using

long-nose pliers

SPRING

WASHER

FLAT

WASHER

13

Insert lower burr

(drive pin & cavity to

align).

Insert at washer

& spring washer.

TIGHTEN NUT

14

Rotate

counter-clockwise to

tighten nut

15

Insert & lock

top burr

16

Set GRIND SIZE to 16

17

Replace hopper

18

Lock hopper

SLOWER

EXTRACTION

FASTER

EXTRACTION SLOWER

EXTRACTION

FASTER

EXTRACTION

SLOWER

EXTRACTION

FASTER

EXTRACTION

Finer (Slower) Coarser (Faster)

16

WARNING

Care should be taken as the grinder burrs are extremely sharp.

Strona jest ładowana ...

Sage SES881BSS4FEU1 instrukcja

Sage SES881BSS4FEU1 instrukcja

w innych językach

Powiązane dokumenty

Inne dokumenty