Camera Wall Mount
3
(AWM100)
STEP 4. Start Recording
STEP 3.
STEP 2.
STEP 1.
Motion Activated Camera BMC100
Motion Sensor
2
1
TimeLapse Camera
(ATM100)
(TLC200 f1.2)
BMC100 - Installation
Install the AWM100.
Install the TLC200 f1.2 .
Set up screen
2
1
1. Switch ON.
2. The LCD will show set up screen.
Preview screen
3
3. Press OK twice to the recording process.
Preview screen
.
REC
Install the ATM100 .
Motion
A
By sticker (smooth surface)
B
By screw (brick)
or
Use the screw to x on
the wall.
Clean up the at surface, be sure there
is no dust on the surface. Remove the
sticker seal, paste on the wall for at
least 24 hours.
Menu
Overwrite
Mode
A
Overwrite
o
on
B
Press MENU, select the Overwrite Mode.
Choose on or o to set up overwrite mode.
Note - Overwrite Mode
The camera will be automatically activated overwrite mode
once Motion Sensor (ATM100) is plug in camera, you can go to
camera setting menu to change if necessary.
A
B