Sony KDL-46 S2000 Instrukcja obsługi

KDL-46S2000

KDL-40S2000

KDL-32S2000

KDL-32S2020

KDL-26S2010

KDL-46S2010

KDL-40S2010

KDL-32S2010

KDL-26S2000

KDL-26S2020

LCD Digital Colour TV

2-684-953-41(1)

GB

RU

PL

K

Operatin

g

Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Инструкция по эксплуатации

Перед включением телевизора прочтите раздел “Сведения

по безопасности” этого руководства.

Сохраняйте данное руководство для справок в будущем.

Instrukcja obsługi

Przed rozpoczęciem eksploatacji telewizora należy

zapoznać się z treścią rozdziału „Informacje dotyczące

bezpieczeństwa” niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

For useful information about Sony products

Для получения полезной информации о продукции Сони

Szczegółowe informacje o produktach Sony

2

GB

• To prevent the risk of electric shock, if the mains lead or

plug is damaged, do not insert the plug into the mains

socket outlet. This plug cannot be used and should be

destroyed.

• To prevent the risk of fire or electric shock, do not expose

the TV set to rain or moisture.

• Dangerously high voltages are present inside the TV set.

Do not open the cabinet. Refer servicing to qualified

personnel only.

• Any functions related to Digital TV ( ) will only

work in countries or areas where DVB-T (MPEG2) digital

terrestrial signals are broadcasted. Please confirm with

your local dealer if you can receive a DVB-T signal where

you live.

• Although this TV set follows DVB-T specifications,

compatibility with future DVB-T digital terrestrial

broadcasts cannot be guaranteed.

• Some Digital TV functions may not be available in some

countries.

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

Trademark information

• is a registered trademark of the DVB Project

• Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897. BBE and BBE

symbol are registered trademarks of BBE Sound, Inc.

• TruSurround XT, SRS and (

z) symbol are trademarks of

SRS Labs, Inc.

TruSurround XT technology is incorporated under license

from SRS Labs, Inc.

• HDMI, the HDMI logo and

High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing, LLC.

• The illustrations used in this manual are of the KDL-

32S2000/KDL-32S2010/KDL-32S2020 unless otherwise

state.

WARNING

Notice for Digital TV function

Introduction

3

GB

Table of Contents

Safety information .....................................................................................................................7

Precautions .............................................................................................................................10

Overview of the remote ........................................................................................................11

Overview of the TV buttons and indicators ........................................................................12

Watching TV............................................................................................................................13

Checking the Digital Electronic Programme Guide (EPG) .............................................15

Using the Favourite list ..................................................................................................17

Viewing pictures from connected equipment ..........................................................................18

Navigating through menus ......................................................................................................19

Picture menu ...........................................................................................................................20

Sound menu............................................................................................................................22

Screen menu...........................................................................................................................24

Set-up menu............................................................................................................................25

PC Settings menu ...................................................................................................................27

Analogue Set-up menu (Analogue mode only) .......................................................................28

Digital Set-up menu .......................................................................................................31

Connecting optional equipment...............................................................................................33

Specifications ..........................................................................................................................36

Troubleshooting ......................................................................................................................38

Index .......................................................................................................................................40

Start-up Guide 4

Watching TV

Using MENU Functions

Using Optional Equipment

Additional Information

GB

: for digital channels only

4

GB

Start-up Guide

1: Checking the

accessories

Remote RM-ED005 (1)

Size AA batteries (R6 type) (2)

Mains lead (Type C-6) (1)

Coaxial cable (1)

Cable holder (1)

Support belt (1) and screws (2)

To insert batteries into the remote

Notes

• Observe the correct polarity when inserting batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate disposal of the battery.

Please consult your local authority.

• Do not use different types of batteries together or mix old

and new batteries.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, or

in a place subject to direct sunlight, or in a damp room.

2: Connecting an aerial/

VCR

Connecting an aerial only

Connecting an aerial and VCR

Coaxial cable

(supplied)

Mains lead (supplied)

Scart lead (not supplied)

RF lead

(not supplied)

VCR

Mains lead

(supplied)

5

GB

Start-up Guide

3: Bundling the cables

4: Preventing the TV

from toppling over

5: Selecting the

language and country/

region

1 Connect the TV to your mains socket (220-

240V AC, 50Hz).

2 Press 1 on the TV (top side).

When you switch on the TV for the first time, the

Language menu appears on the screen.

When the TV is in standby mode (the

1 (standby)

indicator on the TV (front) is red), press "/1 on

the remote to switch on the TV.

2

3

1

2

3,4

2

Continued

6

GB

3 Press F/f to select the language

displayed on the menu screens, then press

.

4 Press F/f to select the country/region in

which you will operate the TV, then press

.

If the country/region in which you want to use the

TV does not appear in the list, select “-” instead of

a country/region.

The message confirming the TV start auto-tuning

appears on the screen, then go to “6: Auto-tuning

the TV”.

6: Auto-tuning the TV

The TV will now search for and store all available TV

channels.

1 Before you start auto-tuning the TV, insert

a pre-recorded tape into the VCR

connected to the TV (page 4) and start play

back.

The video channel will be located and stored on

the TV during auto-tuning.

If no VCR is connected to the TV, this procedure

is not required. Go to step 2.

2 Select “OK”, then press .

The TV starts searching for all available digital

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

If a message appears for you to confirm the aerial

connections

No digital or analogue channels were found.

Check all the aerial connections and press to

start auto-tuning again.

3 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” (page 28).

If you do not wish to change the order in which the

analogue channels are stored on the TV, go to step

4.

4 Press MENU to exit.

The TV has now tuned in all the available

channels.

4

2

7

GB

Safety information

Mains lead

• Unplug the mains lead

when moving the TV

set. Do not move the

TV set with the mains

lead plugged in. It may

damage the mains lead

and result in fire or electric shock.

• If you damage the mains lead, it may

result in fire or electric shock.

– Do not pinch, bend, or twist the

mains lead excessively. The core

conductors may be exposed or

broken, causing a short-circuit,

which may cause fire or electric

shock.

– Do not modify or damage the mains

lead.

– Do not put anything heavy on the

mains lead. Do not pull the mains

lead.

– Keep the mains lead away from heat sources.

– Be sure to grasp the plug when disconnecting the mains

lead.

• If the mains lead is damaged, stop using it and ask your

dealer or Sony service centre to exchange it.

• Do not use the supplied mains lead on any other

equipment.

• Use only an original Sony mains lead, not other brands.

Mains lead/cable protection

Pull out the mains lead/cable by

the plug. Do not pull on the mains

lead/cable itself.

Mains

Do not use a poor fitting mains socket. Insert

the plug fully into the mains socket. A poor

fit may cause arcing and result in fire.

Contact your electrician to have the mains

socket changed.

For the TV set with a three-wire

grounding type AC mains plug

This TV set must be connected to an AC mains socket with a

protective earthing connection.

Optional accessories

Observe the following when installing the

TV set using a wall-mount bracket. If you do

not do so, the TV set may fall and cause

serious injury.

• It is strongly recommended that you use Sony accessories

for safety reasons:

– KDL-46S2000/KDL-46S2010/KDL-40S2000/

KDL-40S2010:

Wall-mount bracket SU-WL51

– KDL-32S2000/KDL-32S2010/KDL-32S2020/

KDL-26S2000/KDL-26S2010/KDL-26S2020:

Wall-mount bracket SU-WL31

• It is strongly recommended that you use the official Sony

wall-mount bracket to allow adequate air circulation and

to avoid dust build up around the TV, wall and ceiling.

• Secure the TV set properly, following the instructions

supplied with your wall-mount bracket when installing the

TV set.

Installation

• If the TV set is to be installed on

a wall, have the installation

carried out by qualified service

men. Improper installation may

render the TV set unsafe.

• The TV should be installed near

an easily accessible mains socket.

Medical institutions

Do not place this TV set in a place

where medical equipment is in

use. It may cause malfunction of

medical instruments.

Carrying

• Before carrying the TV set, disconnect

all the cables from the TV set.

• When you carry the TV set by hand,

hold the TV set as illustrated on the

right. If you do not do so, the TV set

may fall and be damaged or cause

serious injury. If the TV set has been

dropped or damaged, have it checked

immediately by qualified service

personnel.

• When transporting it, do not subject the

TV set to jolts or excessive vibration. The TV set may fall

and be damaged or cause serious injury.

• When you carry the TV set in for repair or when you move

it, pack it using the original carton and packing material.

• Carrying the TV set requires two or more people.

Ventilation

• Never cover the ventilation

holes in the cabinet. It may

cause overheating and result in

fire.

• Unless proper ventilation is provided, the TV set may

gather dust and get dirty. For proper ventilation, observe

the following:

– Do not install the TV set turned backwards or sideways.

– Do not install the TV set turned over or upside down.

– Do not install the TV set on a shelf or in a closet.

– Do not place the TV set on a rug or bed.

– Do not cover the TV set with cloth, such as curtains, or

items such as newspapers, etc.

Continued

8

GB

• Leave some space around the TV set. Otherwise, air-

circulation may be inadequate and cause overheating,

which may cause fire or damage to the TV set.

• When installing the TV set on the wall, leave at least

10 cm space from the bottom, and at least 5.5 cm between

the back of the TV set and the wall.

• Never install the TV set as follows:

Ventilation holes

Do not insert anything in the ventilation

holes. If metal or liquid is inserted in these

holes, it may result in fire or electric shock.

Placement

• Never place the TV set in hot, humid

or excessively dusty places.

• Do not install the TV set where

insects may enter.

• Do not install the TV set where it

may be exposed to mechanical vibration.

• Place the TV set on a stable, level surface.

Otherwise, the TV set may fall and cause

injury.

• Do not install the TV set in a location

where it may protrude, such as on or

behind a pillar, or where you might bump

your head on it. Otherwise, it may result

in injury.

Water and moisture

• Do not use this TV set near water

– for example, near a bathtub or

shower room. Also do not expose

to rain, moisture or smoke. This

may result in fire or electric shock.

• Do not touch the mains lead and the TV

set with wet hands. Doing so may cause

electric shock or damage to the TV set.

Moisture and flammable objects

• Do not let this TV set get wet. Never

spill liquid of any kind on the TV set.

If any liquid or solid object does fall

through openings in the cabinet, do

not operate the TV set. It may result in

electric shock or damage to the TV set.

Have it checked immediately by

qualified service personnel.

• To prevent fire, keep flammable objects (candles, etc.) and

electric bulbs away from the TV set.

Oils

Do not install this TV set in restaurants that use oil. Dust

absorbing oil may enter and damage the TV set.

Fall

Place the TV set on a secure, stable stand. Do

not hang anything on the TV set. If you do,

the TV set may fall from the stand or wall-

mount bracket, causing damage or serious

injury.

Do not allow children to climb on the TV set.

Vehicle or ceiling

Do not install this TV set in a

vehicle. The motion of the vehicle

may cause the TV set to fall down

and cause injury. Do not hang this

TV set from the ceiling.

Ships and other vessels

Do not install this TV set on a ship

or other vessel. If the TV set is

exposed to seawater, it may cause

fire or damage the TV set.

Outdoor use

• Do not expose the TV set to

direct sunlight. The TV set may

heat up and this may result in

damage to the TV set.

• Do not install this TV set

outdoors.

Wiring

• Unplug the mains lead when wiring cables. When hooking

up, be sure to unplug the mains lead for your safety.

• Take care not to catch your feet on the cables. It may

damage the TV set.

Cleaning

• Unplug the mains lead when cleaning the

mains plug and this TV set. If you do not,

it may result in electric shock.

• Clean the mains plug regularly. If the

plug is covered with dust and it picks up

moisture, its insulation may deteriorate

and result in fire.

30 cm

Leave at least this much space.

10 cm 10 cm 15 cm

Air circulation

is blocked.

Air circulation

is blocked.

Wall Wall

9

GB

Lightning storms

For your own safety, do not touch any

part of the TV set, mains lead, or

aerial lead during lightning storms.

Damage requiring service

If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

may result.

Servicing

Do not open the cabinet. Entrust the

TV set to qualified service personnel

only.

Small accessories removal and

fittable

Keep accessories out of children’s reach. If they are

swallowed, choking or suffocation may occur. Call a doctor

immediately.

Broken pieces

Do not throw anything at the TV set. The

screen glass may break by the impact and

cause serious injury.

When not in use

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

when unused. Disconnect from

the mains. However, some TV

sets may have features which need the TV set to be left in

standby to work correctly. The instructions in this manual

will inform you if this applies.

Viewing the TV

• To view the TV comfortably, the recommended viewing

position is from four to seven times the screen’s vertical

length away from the TV set.

• View the TV in moderate light, as viewing the TV in poor

light strains your eyes. Watching the screen continuously

for long periods of time can also strain your eyes.

• If the angle of the TV set is to be adjusted, steady the base

of the stand with your hand to prevent the TV set from

becoming separated from the stand. Be careful not to get

your fingers caught between the TV set and the stand.

Volume adjustment

• Adjust the volume so as not to trouble your neighbours.

Sound carries very easily at night time. Therefore, closing

the windows or using headphones is suggested.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

Overloading

This TV set is designed to operate on

a 220–240 V AC supply only. Take

care not to connect too many

appliances to the same mains socket

as this could result in fire or electric

shock.

Heat

Do not touch the surface of the TV set. It remains hot, even

after the TV set has been turned off for some time.

Corrosion

If you use this TV set near the seashore, salt may corrode

metal parts of the TV set and cause internal damage or fire.

It may also shorten the life of the TV set. Steps should be

taken to reduce the humidity and moderate the temperature

of the area where the TV set is located.

Handling

• When lifting the TV set or moving the

panel of the TV set, hold it firmly from the

bottom.

• For the KDL-46S2000/

KDL-46S2010, when lifting or

moving the TV, be sure to hold the

panel firmly as illustrated. Place your

palm directly under the panel, from

the rear of the TV.

10

GB

Precautions

LCD Screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD screen. This

is a structural property of the LCD panel and is not a

malfunction.

• Do not expose the LCD screen surface to the sun. Doing

so may damage the screen surface.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

panel may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark.

This does not indicate a failure. These phenomena

disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD contains a small amount of liquid crystal and

mercury. The fluorescent tube used in this TV set also

contains mercury. Follow your local ordinances and

regulations for disposal.

Fluorescent lamp

This TV set uses a special fluorescent lamp as its light

source. If the screen image becomes dark, flickers, or does

not appear, the fluorescent lamp has worn out and the LCD

screen should be replaced. For replacement, consult qualified

service personnel.

Installing the TV set

• Do not install the TV set in places subject to extreme

temperature, for example in direct sunlight, or near a

radiator, or heating vent. If the TV set is exposed to

extreme temperature, the TV set may overheat and cause

deformation of the casing or cause the TV set to

malfunction.

• The TV set is not disconnected from the mains when the

TV set is switched off. To disconnect the TV set

completely, pull the plug from the mains.

• To obtain a clear picture, do not expose the screen to direct

illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

• Do not install optional components too close to the TV set.

Keep optional components at least 30 cm away from the

TV set. If a VCR is installed in front of the TV set or

beside the TV set, the picture may become distorted.

• Picture distortion and/or noisy sound may occur if the TV

set is positioned in close proximity to any equipment

emitting electromagnetic radiation.

Handling and cleaning the screen surface/cabinet of

the TV set

To avoid material degradation or screen coating degradation,

observe the following precautions.

• Do not push on the screen, scratch it with a hard object, or

throw anything at it. The screen may be damaged.

• Do not touch the display panel after operating the TV set

continuously for a long period as the display panel

becomes hot.

• We recommend that the screen surface be touched as little

as possible.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• The ventilation holes can accumulate dust over time. To

ensure proper ventilation, we recommend removing the

dust periodically (once a month) using a vacuum cleaner.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Disposal of the TV set

11

GB

Overview of the remote

Tip

The A/B, PROG + and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV.

1 "/1 – TV standby

Switches off the TV temporarily and on from standby mode.

2 A/B – Dual Sound (page 23)

3 Coloured buttons

Selects the options at the bottom of the Favourite and EPG digital menus.

4 / – Info / Text reveal

• In digital mode: Displays brief details of the programme currently being

watched.

• In analogue mode: Displays information such as current channel number

and screen mode.

• In Text mode (page 14): Reveals hidden information (e.g., answers to a

quiz).

5 F/f/G/g/ (page 13, 19)

6 TOOLS (page 14, 18, 35)

Enables you to access various viewing options and change/make adjustments

according to the source and screen mode.

7 MENU (page 19)

8 DIGITAL – Digital mode (page 13)

9 Number buttons

• In TV mode: Selects channels. For channel numbers 10 and above, enter

the second digit within two seconds.

• In Text mode: Enters the three digit page number to select the page.

0 – Previous channel

Returns to the previous channel watched (for more than five seconds).

qa PROG +/- (page 13)

• In TV mode: Selects the next (+) or previous (-) channel.

• In Text mode: Selects the next (+) or previous (-) page.

qs 2 +/- – Volume

qd % – Mute (page 13)

qf

/ – Text (page 14)

qg ANALOG – Analogue mode (page 13)

qh / RETURN

Returns to the previous screen of any displayed menu.

qj – EPG (Digital Electronic Programme Guide) (page 15)

qk – Picture freeze (page 14)

Freezes the TV picture.

ql – Screen mode (page 14)

w; / – Input select / Text hold

• In TV mode (page 18): Selects the input source from equipment connected

to the TV sockets.

• In Text mode (page 14): Holds the current page.

12

GB

Overview of the TV buttons and indicators

Note

Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is

turned on may cause the indicator to remain lit or may cause the TV to malfunction.

1 (page 19)

2 / – Input select/OK

• In TV mode (page 18): Selects the input

source from equipment connected to the TV

sockets.

• In TV menu: Selects the menu or option, and

confirm the setting.

3 2 +/-/ /

• Increases (+) or decreases (-) the volume.

• In TV menu: Moves through the options left

( ) or right ( ).

4 PROG +/-/ /

• In TV mode: Selects the next (+) or previous

(-) channel.

• In TV menu: Moves through the options up

( ) or down ( ).

5 1 – Power

Switches the TV on or off.

6 Remote control sensor

7 – Picture Off/Timer indicator

• Lights up in green when the picture is

switched off (page 26).

• Lights up in orange when the timer is set

(page 25).

8 1 – Standby indicator

Lights up in red when the TV is in standby mode.

9 " – Power indicator

Lights up in green when the TV is switched on.

MENU

13

GB

Watching TV

1 Press 1 on the TV (top side) to switch on

the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press "/1 on

the remote to switch on the TV.

2 Press DIGITAL to switch to digital mode or

ANALOG to switch to analogue mode.

The channels available vary depending on the

mode.

3 Press the number buttons or PROG +/- to

select a TV channel.

To select channel numbers 10 and above using the

number buttons, enter the second and third digits

within two seconds.

To select a digital channel using the Digital

Electronic Programme Guide (EPG), see page 15.

In digital mode

An information banner appears briefly. The

following icons may be indicated on the banner.

Additional operations

Watching TV

3

1

22

3

: Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

: Current programme is being recorded

To Do this

Turn off the TV

temporarily

(Standby mode)

Press "/1.

Turn on the TV

from Standby mode

without sound

Press %. Press 2 +/- to set the

volume level.

Turn off the TV

completely

Press 1 on the TV (top side).

Adjust the volume Press 2 + (increase)/

- (decrease).

Mute the sound Press %. Press again to restore.

Access the

Programme index

table (in analogue

mode only)

Press . To select an analogue

channel, press

F/f, then press

.

To access the Input signal index

table, see page 18.

Continued

14

GB

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text t Text over the TV picture (mix mode) t No

Text (exit the Text service)

To select a page, press the number buttons or PROG

+/-.

To hold a page, press / .

To reveal hidden information, press / .

Tips

• Ensure that the TV is receiving a good signal, or some text

errors may occur.

• Most TV channels broadcast a Text service. For

information on the use of the service, select the index

page.

• When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access

pages quickly and easily. Press the corresponding

coloured button to access the page.

Picture Freeze

Freezes the TV picture (e.g. to make a note of a

telephone number or recipe).

1 Press on the remote control.

2 Press F/f/G/g to adjust the position of the

window.

3 Press to remove the window.

4 Press again to return to normal TV

mode.

To change the screen mode manually to

suit the broadcast

Press repeatedly to select Smart, 4:3, Wide,

Zoom, or 14:9.

Displays conventional 4:3 broadcasts with an

imitation wide screen effect. The 4:3 picture is

stretched to fill the screen.

Displays conventional 4:3 broadcasts (e.g., non-wide

screen TV) in the correct proportions.

Displays wide screen (16:9) broadcasts in the correct

proportions.

Displays cinemascopic (letter box format) broadcasts

in the correct proportions.

Displays 14:9 broadcasts in the correct proportions.

As a result, black border areas are visible on the

screen.

* Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. The TV

will automatically select the best mode to suit the

broadcast (page 24).

• You can adjust the position of the picture when selecting

14:9 or Zoom. Press

F/f to move up or down (e.g., to

read subtitles).

• Some characters and/or letters at the top and the bottom of

the picture may not be visible in Smart mode. In such a

case, you can select “Vertical Size” using the “Screen”

menu and adjust vertical size to make it visible.

Using the Tools menu

Press TOOLS to display the following options when

viewing the TV programme.

Smart*

4:3

Options Description

Power Saving See page 26.

Subtitle Setting (in

digital mode only)

See page 32.

Digital Favourites (in

digital mode only)

See page 17.

Picture Mode See page 20.

Sound Mode See page 22.

Auto Clock Set (in

analogue mode only)

Allows you to switch to digital

mode and obtain the time.

Sleep Timer See page 25.

i Volume See page 23.

Wide

Zoom*

14:9*

15

GB

Watching TV

Checking the Digital Electronic Programme Guide

(EPG) *

1 In digital mode, press to display the

Digital Electronic Programme Guide

(EPG).

2 Perform the desired operation, as shown in

the following table.

Note

Programme information will only be displayed if the TV

station is transmitting it.

* Please note that this function may not be available in some countries.

Digital Electronic Programme Guide (EPG)

To Do this

Turn off the EPG Press .

Move through the EPG Press

F/f/G/g.

Watch a current programme Press while the current programme is selected.

Sort the programme information by

category – Category list

1 Press the blue button.

2 Press

F/f/G/g to select a category. The category name is

displayed on the side.

The categories available include:

“Favourite”: Contains all the channels that have been stored in the

Favourite list (page 17).

“All Categories”: Contains all available channels.

“News”: Contains all news channels.

3 Press .

The Digital Electronic Programme Guide (EPG) now only displays the

current programmes from the category selected.

Set a programme to be recorded – Timer

REC

1 Press F/f/G/g to select the future programme you want to

record.

2 Press .

3 Press

F/f to select “Timer REC”.

4 Press to set the TV and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for pin

code will appear on the screen. For more details refer to “Parental Lock” on

page 32.

Continued

16

GB

Tip

You can also display the Digital Electronic Programme Guide (EPG) by selecting “Digital EPG” in the “MENU” (page 19).

Set a programme to be displayed

automatically on the screen when it starts

– Reminder

1 Press F/f/G/g to select the future programme you want to

display.

2 Press .

3 Press

F/f to select “Reminder”.

4 Press to automatically display the selected programme

when the programme starts.

A c symbol appears by that programme’s information.

Note

If you switch the TV to standby mode, it will automatically turn itself on

when the programme is about to start.

Set the time and date of a programme you

want to record – Manual timer REC

1 Press .

2 Press

F/f to select “Manual timer REC”, then press .

3 Press

F/f to select the date, then press g.

4 Set the start and stop time in the same way as in step 3.

5 Press

F/f to select the programme, then press to set the

TV and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for pin

code will appear on the screen. For more details refer to “Parental Lock” on

page 32.

Cancel a recording/reminder – Timer list

1 Press .

2 Press

F/f to select “Timer list”.

3 Press

F/f to select the programme you want to cancel, then

press .

A display appears to confirm that you want to cancel the programme.

4 Press g to select “Yes”, then press to confirm.

To Do this

17

GB

Watching TV

Using the Favourite list *

The Favourite feature allows you to select programs

from a list of up to 8 channels you specify. To display

the Favourite list, see “Navigating through menus”

(page 19).

* Please note that this function may not be available in some countries.

Favourite list

To Do this

Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list

when you select “Digital Favourites” in the “MENU” for the first time.

1 Press to select “Yes”.

2 Press

F/f to select the channel you want to add.

If you know the channel number, you can use the number buttons to

directly select a channel.

3 Press .

Channels that are stored in the Favourite list are indicated by a

symbol.

Turn off the Favourite list Press RETURN.

See brief details on current programmes Press while selecting a channel. Press again to cancel.

Watch a channel Press while selecting a channel.

Add or remove channels in the Favourite

list

1 Press the blue button.

Channels that are stored in the Favourite list are indicated by a

symbol.

2 Press F/f to select the channel you want to add or remove.

If you know the channel number, you can use the number buttons to

directly select a channel.

3 Press .

4 Press the blue button to return to the Favourite list.

Remove all channels from the Favourite list

1 Press the blue button.

2 Press the yellow button.

A display appears to confirm that you want to delete all channels from the

Favourite list.

3 Press G to select “Yes”, then press to confirm.

18

GB

Viewing pictures from

connected equipment

Switch on the connected equipment, then

perform one of the following operation.

For equipment connected to the scart sockets using a

fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on

the screen.

For an auto-tuned VCR (page 6)

In analogue mode, press PROG +/-, or the number

buttons, to select the video channel.

For other connected equipment

Press / repeatedly until the correct input

symbol (see below) appears on the screen.

Additional operations

Using the Tools menu

Press TOOLS to display the following options when

viewing pictures from connected equipment other

than PC.

AV1/ AV1, AV2/ AV2:

Audio/video or RGB input signal through the scart

socket / 1 or 2. appears only if an RGB

source has been connected.

AV3:

Component input signal through the Y, P

B/CB, PR/CR

sockets / 3, and audio input signal through the

L, R sockets / 3.

AV4:

Digital audio/video signal is input through the HDMI IN

4 socket. Audio input signal is analogue only if the

equipment has been connected using the DVI and audio

out socket.

AV5/ AV5:

Video input signal through the video socket 5, and

audio input signal through the L (MONO), R audio

sockets 5. appears only if the equipment is

connected to the S video socket 5 instead of the

video socket 5, and S video input signal is input

through the S video socket 5.

To Do this

Return to the normal

TV operation

Press DIGITAL or ANALOG.

Access the Input

signal index table

Press to access the Input signal

index table. (Then, only in

analogue mode, press

g.) To

select an input source, press

F/f,

then press .

Options Description

Power Saving See page 26.

Picture Mode See page 20.

Sound Mode See page 22.

Auto Clock Set (in

analogue mode only)

Allows you to switch to digital

mode and obtain the time.

Sleep Timer See page 25.

i Volume See page 23.

19

GB

Using MENU Functions

Navigating through menus

“MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or external

inputs with the remote. Also, settings for your TV can be changed easily using “MENU”.

1 Press MENU to display the menu.

2 Press F/f to select an option.

3 Press to confirm a selected option.

To exit the menu, press MENU.

Using MENU Functions

1

2,3

Menu Description

Digital Favourites

(only in areas with

digital broadcasting)

Launches the Favourite list. For details about settings, see page 17.

Programme List

(only in areas with

analogue broadcasting)

Allows you to select TV programs from a list of channel labels.

• To watch the desired channel, select the channel, then press .

• To assign a label to a program, see page 28.

Analogue

(only in areas with

digital broadcasting)

Returns to the last viewed analogue channel.

Digital

(only in areas with

digital broadcasting)

Returns to the last viewed digital channel.

Digital EPG

(only in areas with

digital broadcasting)

Launches the Digital Electronic Programme Guide (EPG).

For details about settings, see page 15.

External Inputs

Selects equipment connected to your TV.

• To watch the desired external input, select the input source, then

press .

• To assign a label to an external input, see page 25.

Settings

Opens the Settings menu screen where most of advanced settings and

adjustments are performed. Select a menu icon, select an option and make the

desired change or adjustment using

F/f/G/g.

For details about settings, see page 20 to 32.

20

GB

Picture menu

You can select the options listed below on the Picture

menu. To select options in “Settings”, see “Navigating

through menus” (page 19).

Target Inputs

Selects whether to apply settings made in the Picture menu to all inputs, or only to

the input currently being watched.

“All”: Applies settings to all inputs.

“Viewing Only”: Applies settings only to the current input.

Picture Mode

Selects the picture mode.

“Vivid”: For enhanced picture contrast and sharpness.

“Standard”: For standard picture. Recommended for home entertainment.

“Custom”: Allows you to store your preferred settings.

Reset

Resets all picture settings except “Picture Mode” to the factory settings.

Backlight

Adjusts the brightness of the backlight.

Contrast

Increases or decreases picture contrast.

Brightness

Brightens or darkens the picture.

Colour

Increases or decreases colour intensity.

Hue

Increases or decreases the green tones.

Tip

“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

Colour Temperature

Adjusts the whiteness of the picture.

“Cool”: Gives the white colours a blue tint.

“Neutral”: Gives the white colours a neutral tint.

“Warm1”/“Warm2”: Gives the white colours a red tint. “Warm2” gives a redder tint

than “Warm1”.

Tip

“Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”.

Sharpness

Sharpens or softens the picture.

Strona się ładuje...

Sony KDL-46 S2000 Instrukcja obsługi

Sony KDL-46 S2000 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty