Sony KDL-40W3000 Instrukcja obsługi

LCD Digital Colour TV

3-219-140-51(2)

GB

KDL-52W3000

KDL-46W3000

KDL-40W3000

PL

RU

Operatin

g

Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

For useful information about Sony products

Szczegółowe informacje o produktach Sony

Для получения полезной информации о продукции Сони

Инструкция по эксплуатации

Перед включением телевизора прочтите раздел “Сведения

по безопасности” этого руководства.

Сохраняйте данное руководство для справок в будущем.

Instrukcja obsługi

Przed rozpoczęciem eksploatacji telewizora należy

zapoznać się z treścią rozdziału „Informacje dotyczące

bezpieczeństwa” niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

2

GB

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic

equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the

environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about recycling of

this product, please contact your local Civic Office, your

household waste disposal service or the shop where you

purchased the product.

• Any functions related to Digital TV ( ) will only work

in countries or areas where DVB-T (MPEG2 and MPEG4

AVC) digital terrestrial signals are broadcast or where you

have access to a compatible DVB-C (MPEG2 and

MPEG4 AVC) cable service. Please confirm with your

local dealer if you can receive a DVB-T signal where you

live or ask your cable provider if their DVB-C cable

service is suitable for integrated operation with this TV.

• The cable provider may charge an additional fee for such

services and you may be required to agree to their terms

and conditions of business.

• Although this TV set follows DVB-T and DVB-C

specifications, compatibility with future DVB-T digital

terrestrial and DVB-C digital cable broadcasts cannot be

guaranteed.

• Some Digital TV functions may not be available in some

countries/regions and DVB-C cable may not operate

correctly with some providers.

For a list of compatible cable providers, refer to the support

web site:

http://support.sony-europe.com/TV/DVBC/

• is a registered trademark of the DVB Project

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

• Adobe is a registered trademark or a trademark of Adobe

Systems Incorporated in the United States and/or other

countries.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

The illustrations used in this manual are of the KDL-

40W3000 unless otherwise stated.

Introduction

Disposal of the TV set

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. The Authorized Representative for

EMC and product safety is Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Notice for Digital TV function

Trademark information

3

GB

Table of Contents

Start-up Guide 4

Safety information .....................................................................................................................9

Precautions .............................................................................................................................11

Overview of the remote ........................................................................................................12

Overview of the TV buttons and indicators ........................................................................14

Watching TV............................................................................................................................15

Using the Digital Electronic Programme Guide (EPG) ....................................................17

Using the Digital Favourite list ........................................................................................19

Connecting optional equipment...............................................................................................20

Viewing pictures from the connected equipment ....................................................................22

Using the remote.....................................................................................................................23

Using HDMI control .................................................................................................................26

Navigating through menus ......................................................................................................27

Picture menu ...........................................................................................................................28

Sound menu............................................................................................................................30

Screen menu (except for PC input).........................................................................................32

Screen menu (for PC input) ....................................................................................................33

Video Settings menu ...............................................................................................................34

Audio Settings menu ...............................................................................................................36

Set-up menu............................................................................................................................37

Analogue Set-up menu ...........................................................................................................40

Digital Set-up menu ........................................................................................................43

Specifications ..........................................................................................................................46

Troubleshooting ......................................................................................................................48

Watching TV

Using Optional Equipment

Using Menu Functions

Additional Information

: for digital channels only

GB

4

GB

Start-up Guide

1: Checking the

accessories

Mains lead (Type C-6)* (1)

Coaxial cable* (1)

PC cable* (1)

Support belt (1) and screws (2)

Stand (1) and screws (4) (only for KDL-46W3000/

40W3000)

Remote RM-ED010 (1)

Size AA batteries (R6 type) (2)

* Do not remove the ferrite cores.

To insert batteries into the remote

~

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old

and new batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate the disposal of batteries.

Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, a

place subject to direct sunlight, or a damp room.

2: Attaching the stand

(except for KDL-

52W3000)

1 Place the TV onto the stand by aligning the

screw hole alignment lines over the stand

as shown.

2 Fix the TV to the stand using the supplied

screws.

~

• This TV is very heavy, so two or more people should place

the TV on the stand.

• If using an electric screwdriver, set the tightening torque

at approximately 1.5 N·m (15 kgf·cm).

• When installing the TV onto the wall, follow step 1 to

prevent the TV panel from falling over.

Push and slide to open.

5

GB

Start-up Guide

3: Connecting an aerial/

cable/VCR

4: Preventing the TV

from toppling over

Connecting an aerial/cable

Connecting an aerial/cable and VCR

Coaxial cable (supplied)

Mains lead

(supplied)

Scart lead (not supplied)

VCR

Mains lead

(supplied)

Coaxial cable

(not supplied)

Coaxial cable

(supplied)

Terrestrial signal

or cable

Terrestrial

signal or cable

6

GB

5: Bundling the cables

~

The hook of the cable holder can be opened from either sides

depending on attaching position.

6: Performing the initial

set-up

1 Connect the TV to your mains socket

(220–240 V AC, 50 Hz).

2 Press 1 on the top edge of the TV.

When you turn on the TV for the first time, the

Language menu appears on the screen.

Selecting the language and country/

region

3, 4, 6, 7

9

3, 4, 6, 7

7

GB

Start-up Guide

3 Press F/f/G/g to select the language

displayed on the menu screens, then press

.

4 Press F/f to select the country/region in

which you will operate the TV, then press

.

If the country/region which you want to use on the

TV does not appear in the list, select “–” instead

of a country/region.

5 Before you start auto tuning the TV, insert

a pre-recorded tape into the VCR

connected to the TV (page 5) and start play

back.

The video channel will be located and stored on

the TV during auto tuning.

If no VCR is connected to the TV, skip this step.

6 Press G/g to select “OK”, then press .

7 Press F/f to select “Antenna” or “Cable”,

then press .

If you select “Cable”, the screen for selecting the

scan type appears. See “To tune the TV for digital

cable connection” on page 7.

The TV starts searching for all available digital

channels, followed by all available analogue

channels. This may take some time, so do not

press any buttons on the TV or remote while

proceeding.

If a message appears for you to confirm the aerial

connection

No digital or analogue channels were found.

Check all the aerial connections and press to

start auto tuning again.

8 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” on page 40.

If you do not wish to change the order in which the

analogue channels are stored on the TV, go to next

step.

9 Press MENU to exit.

The TV has now tuned in all the available

channels.

~

When a digital broadcast channel cannot be received, or

when selecting a country/region in which there are no digital

broadcasts in step 4 (page 7), the time must be set after

performing step 9.

To tune the TV for digital cable connection

1 Press F/f to select “Scan Type”, then

press .

2 Press F/f to select “Quick Scan” or “Full

Scan”, then press .

“Quick Scan”: Channels are tuned according to

the cable provider’s information within the

broadcast signal. The recommended setting for

“Frequency”, “Network ID” and “Symbol Rate” is

“Auto” unless your cable provider has supplied

actual values to use. “Quick Scan” is

recommended for fast tuning when this is

supported by your cable provider.

“Full Scan”: All available channels are tuned and

stored. This procedure may take some time. This

option is recommended when “Quick Scan” is not

supported by your cable provider.

For further information about supported cable

providers, refer to the support web site:

http://support.sony-europe.com/TV/DVBC/

3 Press G/g/f to select “Start”, then press

.

The TV starts searching for channels. Do not press

any buttons on the TV or remote.

~

Some cable providers do not support “Quick Scan”. If no

channels are detected using “Quick Scan”, perform “Full

Scan”.

Auto tuning the TV

8

GB

Detaching the Table-

Top Stand from the TV

~

Do not remove the Table-Top Stand for any reason other than

to wall-mount the TV or to attach the optional TV stand.

9

GB

Safety information

Installation/Set-up

Install and use the TV set in accordance with the

instructions below in order to avoid any risk of fire,

electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible

mains socket.

• Place the TV set on a stable, level surface.

• Only qualified service personnel should carry out wall

installations.

• For safety reasons, it is strongly recommended that you

use Sony accessories, including:

KDL-52W3000/46W3000/40W3000:

– Wall-mount bracket SU-WL500

KDL-52W3000/46W3000/40W3000:

– Floor stand SU-FL62

KDL-46W3000/40W3000:

– TV stand SU-FL300M

Transporting

• Before transporting the

TV set, disconnect all

cables.

• Two or three people are

needed to transport a large

TV set.

• When transporting the TV

set by hand, hold it as

shown on the right. Do not

put stress on the LCD

panel.

• When lifting or moving

the TV set, hold it firmly

from the bottom.

• When transporting the TV

set, do not subject it to

jolts or excessive

vibration.

• When transporting the TV

set for repairs or when moving, pack it using the original

carton and packing material.

Ventilation

• Never cover the ventilation holes or insert anything in the

cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-

mount bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent the collection of

dirt or dust:

– Do not lay the TV set flat, install upside down,

backwards, or sideways.

– Do not place the TV set on a shelf, rug, bed or in a

closet.

– Do not cover the TV set with a cloth, such as curtains,

or items such as newspapers, etc.

– Do not install the TV set as shown below.

Mains lead

Handle the mains lead and socket as follows in order

to avoid any risk of fire, electrical shock or damage

and/or injuries:

– Connect the TV set using a three-wire grounding type

mains plug to a mains socket with a protective earthing

connection.

– Use only Sony mains leads, not those of other brands.

– Insert the plug fully into the mains socket.

– Operate the TV set on a 220–240 V AC supply only.

– When wiring cables, be sure to unplug the mains lead

for your safety and take care not to catch your feet on

the cables.

– Disconnect the mains lead from the mains socket before

working on or moving the TV set.

– Keep the mains lead away from heat sources.

Be sure to hold the

bottom of the panel, not

the front part.

30 cm

10 cm 10 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm 10 cm 6 cm

Leave at least this space around the set.

Air circulation is blocked.

Wall Wall

Continued

10

GB

– Unplug the mains plug and clean it regularly. If the plug

is covered with dust and it picks up moisture, its

insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied mains lead on any other

equipment.

• Do not pinch, bend, or twist the mains lead excessively.

The core conductors may be exposed or broken.

• Do not modify the mains lead.

• Do not put anything heavy on the mains lead.

• Do not pull on the mains lead itself when disconnecting

the mains lead.

• Do not connect too many appliances to the same mains

socket.

• Do not use a poor fitting mains socket.

Prohibited Usage

Do not install/use the TV set in locations,

environments or situations such as those listed below,

or the TV set may malfunction and cause a fire,

electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or

other vessel, inside a vehicle, in medical institutions,

unstable locations, near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where

insects may enter; where it might be exposed to mechanical

vibration, near flammable objects (candles, etc). The TV set

shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet

removed, or with attachments not recommended by the

manufacturer. Disconnect the TV set from mains socket and

aerial during lightning storms.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may

break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

may result.

When not in use

• If you will not be using the TV set for several days, the TV

set should be disconnected from the mains for

environmental and safety reasons.

• As the TV set is not disconnected from the mains when the

TV set is just turned off, pull the plug from the mains to

disconnect the TV set completely.

• However, some TV sets may have features that require the

TV set to be left in standby to work correctly. The

instructions in this manual will inform you if this applies.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that

they are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the mains lead

immediately if any of the following problems occur.

Ask your dealer or Sony service centre to have it

checked by qualified service personnel.

When:

– Mains lead is damaged.

– Poor fitting of mains socket.

– TV set is damaged by being dropped, hit or having

something thrown at it.

– Any liquid or solid object falls through openings in the

cabinet.

11

GB

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor

light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD screen. This

is a structural property of the LCD screen and is not a

malfunction.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark. This does not

indicate a failure. These phenomena disappear as the

temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal

and mercury. The fluorescent tubes used in this TV set

also contain mercury. Follow your local ordinances and

regulations for disposal.

Handling and cleaning the screen surface/cabinet of

the TV set

Be sure to unplug the mains lead connected to the TV set

from mains socket before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• When adjusting the angle of the TV set, move it slowly so

as to prevent the TV set from moving or slipping off from

its table stand.

Optional Equipment

Keep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise

picture distortion and/or noisy sound may occur.

12

GB

Overview of the remote

1 TV "/1 — TV standby

Turns the TV on and off from standby mode.

2 Number buttons

• In TV mode: Selects channels. For channel numbers 10 and above, enter

the second and third digit quickly.

• In Text mode: Enters the page number to select the page.

3 — Previous channel

Returns to the previous channel watched (for more than five seconds).

4 — Screen mode (page 16)

5 — Picture freeze (page 15)

Freezes the TV picture.

6 / — Input select / Text hold

• In TV mode (page 22): Selects the input source from equipment connected

to the TV sockets.

• In Text mode (page 16): Holds the current page.

7 F/f/G/g/ (page 15, 27)

8 TOOLS (page 16, 22)

Enables you to access various viewing options and change/make adjustments

according to the source and screen format.

9 MENU (page 27)

0 PROG +/–/ /

• In TV mode (page 15): Selects the next (+) or previous (–) channel.

• In Text mode (page 16): Selects the next ( ) or previous ( ) page.

qa % — Mute (page 15, 22)

qs 2 +/– — Volume (page 22)

qd THEATRE

You can set Theatre Mode on or off. When Theatre Mode is set to on, the

optimum audio output (if the TV is connected with an audio system using an

HDMI cable) and picture quality for film-based contents are automatically

set.

z

If you turn the TV off, Theatre Mode is also turned off.

13

GB

qf RETURN /

Returns to the previous screen of any displayed menu.

qg — EPG (Digital Electronic Programme Guide) (page 17)

qh Coloured buttons (page 16, 17, 19)

qj DIGITAL/ANALOG — TV mode (page 15)

qk A/B — Dual Sound (page 31)

ql / — Text (page 16)

w; LIGHT

Illuminates the buttons on the remote so that you can see them easily even if

the room is dark.

wa / — Info / Text reveal

• In digital mode: Displays brief details of the programme currently being

watched.

• In analogue mode: Displays information such as current channel number

and screen format.

• In Text mode (page 16): Reveals hidden information (e.g. answers to a

quiz).

ws Buttons for using optional equipment

See page 23.

z

The number 5, H, PROG + and A/B buttons have tactile dots. Use the tactile dots as

references when operating the TV.

14

GB

Overview of the TV buttons and indicators

1 1 — Power

Turns the TV on or off.

~

To disconnect the TV completely, pull the plug from the

mains.

2 PROG +/–/ /

• In TV mode: Selects the next (+) or previous (–)

channel.

• In TV menu: Moves through the options up ( ) or

down ( ).

3 2 +/–/ /

• In TV mode: Increases (+) or decreases (–) the

volume.

• In TV menu: Moves through the options right ( )

or left ( ).

4 / — Input select / OK

• In TV mode (page 22): Selects the input source

from equipment connected to the TV sockets.

• In TV menu: Selects the menu or option, and

confirms the setting.

5 (page 27)

6 — Picture Off / Timer indicator

• Lights up in green when the picture is switched off

(page 38).

• Lights up in orange when the timer is set

(page 37).

7 1 — Standby indicator

Lights up in red when the TV is in standby mode.

8 " — Power / Timer REC programme indicator

• Lights up in green when the TV is turned on.

• Lights up in orange when the timer recording is set

(page 17).

• Lights up in red during the timer recording.

9 Remote control sensor / Light sensor (page 38)

• Receives IR signals from the remote.

• Do not put anything over the sensor, as its function

may be affected.

~

Make sure that the TV is completely turned off before

unplugging the mains lead. Unplugging the mains lead while

the TV is turned on may cause the indicator to remain lit or

may cause the TV to malfunction.

15

GB

Watching TV

1 Press 1 on the top edge of the TV to turn

on the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the TV front panel is red), press

TV "/1 on the remote to turn on the TV.

2 Press DIGITAL/ANALOG to switch

between digital and analogue modes.

The channels available vary depending on the

mode.

3 Press the number buttons or PROG +/– to

select a TV channel.

To select channel numbers 10 and above using the

number buttons, enter the second and third digits

quickly.

To select a digital channel using the Digital

Electronic Programme Guide (EPG), see page 17.

In digital mode

An information banner appears briefly. The

following icons may be indicated on the banner.

: HD service

: Radio service

: Scrambled/Subscription service

: Subtitles available

: Subtitles available for the hearing impaired

: Multiple audio languages available

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

c (in red):

Current programme is being recorded

Additional operations

Watching TV

2

3

To Press

Freeze the picture

(Picture freeze)

.

Press again to return to normal

TV mode.

~

This function is not available for a

PC input source.

Access the

Programme index

table (in analogue

mode only)

.

To select an analogue channel,

press

F/f, then press .

Access the Digital

Favourites (in digital

mode only)

.

For details, see page 19.

Mute the sound %.

Press again to restore.

Turn on the TV

without sound from

standby mode

%.

Continued

16

GB

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text and TV picture t Text t No Text (exit the

Text service)

To select a page, press the number buttons or / .

To hold a page, press / .

To reveal hidden information, press / .

z

• You can also jump directly to a page by selecting the page

number displayed on the screen. Press and

F/f/G/g

to select the page number, then press .

• When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access

pages quickly and easily. Press the corresponding

coloured button to access the page.

To change the screen format manually to

suit the broadcast

Press repeatedly to select the desired screen

format.

* Parts of the top and bottom of the picture may be cut off.

~

Some characters and/or letters at the top and the bottom of

the picture may not be visible in “Smart”. In such a case, you

can select “Vertical Size” using the “Screen” menu and

adjust vertical size to make it visible.

z

• When “Auto Format” is set to “On”, the TV will

automatically select the best mode to suit the broadcast

(page 32).

• You can adjust the position of the picture when selecting

“Smart” (50Hz), “Zoom” or “14:9”. Press

F/f to move

up or down (e.g. to read subtitles).

• Select “Smart” or “Zoom” to adjust for 720p, 1080i or

1080p source pictures with edge portions cut off.

Using the Tools menu

Press TOOLS to display the following options when

viewing a TV programme.

Smart*

Displays conventional

4:3 broadcasts with an

imitation wide screen

effect. The 4:3 picture

is stretched to fill the

screen.

4:3

Displays conventional

4:3 broadcasts (e.g.

non-wide screen TV) in

the correct proportions.

Wide

Displays wide screen

(16:9) broadcasts in the

correct proportions.

Zoom*

Displays cinemascopic

(letter box format)

broadcasts in the

correct proportions.

14:9*

Displays 14:9

broadcasts in the

correct proportions. As

a result, black border

areas are visible on the

screen.

Options Description

Close Closes the Tools menu.

Picture Mode See page 28.

Sound Mode See page 30.

Speaker See page 36.

PAP See page 22.

Audio Language (in

digital mode only)

See page 44.

Subtitle Setting (in

digital mode only)

See page 43.

Digital Favourites (in

digital mode only)

See page 19.

i Volume See page 36.

Sleep Timer See page 37.

Power Saving See page 38.

Auto Clock Set (in

analogue mode only)

Allows you to switch to digital

mode and obtain the time.

System Information (in

digital mode only)

Displays the system

information screen.

17

GB

Watching TV

Using the Digital Electronic Programme Guide

(EPG) *

1 In digital mode, press .

2 Perform the desired operation as shown in

the following table or displayed on the

screen.

* This function may not be available in some countries/regions.

Digital Electronic Programme Guide (EPG)

To Do this

Watch a programme Press F/f/G/g to select the programme, then press .

Turn off the EPG Press .

Sort the programme information by

category

– Category list

1 Press the blue button.

2 Press

F/f to select a category, then press .

The categories available include:

“All Categories”, “Radio”: Contains all available channels.

Other category name (e.g. “News”): Contains all programmes

corresponding to the selected category.

Set a programme to be recorded

– Timer REC

1 Press F/f/G/g to select the programme you want to record,

then press

/ .

2 Press

F/f to select “Timer REC”.

3 Press to set the TV and your VCR timers.

A red c symbol appears by that programme’s information. The

indicator on the TV front panel lights up in orange.

z

The above procedure can be used even if the programme to be recorded has already

started.

Set a programme to be displayed

automatically on the screen when it

starts

– Reminder

1 Press F/f/G/g to select the future programme you want to

display, then press / .

2 Press

F/f to select “Reminder”, then press .

A c symbol appears by that programme’s information. The indicator on

the TV front panel lights up in orange.

~

If you switch the TV to standby mode, it will automatically turn itself on

when the programme is about to start.

Continued

18

GB

~

• You can set VCR timer recording on the TV only for SmartLink compatible VCRs. If your VCR is not SmartLink compatible,

a message will be displayed to remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not turn off the TV completely or the recording

will be cancelled.

• If an age restriction for programmes has been selected, a message asking for a PIN code will appear on the screen. For details,

see “Parental Lock” on page 44.

Set the time and date of a programme

you want to record

– Manual timer REC

1 Press / .

2 Press

F/f to select “Manual timer REC”, then press .

3 Press

F/f to select the date, then press g.

4 Set the start and stop time in the same way as in step 3.

5 Press

F/f to select the programme, then press .

6 Press to set the TV and your VCR timers.

The indicator on the TV front panel lights up in orange.

Cancel a recording/reminder

– Timer list

1 Press / .

2 Press

F/f to select “Timer list”, then press .

3 Press

F/f to select the programme you want to cancel, then

press .

4 Press

F/f to select “Cancel Timer”, then press .

A display appears to confirm that you want to cancel the programme.

5 Press G/g to select “Yes”, then press to confirm.

To Do this

19

GB

Watching TV

Using the Digital Favourite list *

The Favourite feature allows you to specify up to four

lists of your favourite programmes.

1 Press MENU.

2 Press F/f to select “Digital Favourites”,

then press .

3 Perform the desired operation as shown in

the following table or displayed on the

screen.

* This function may not be available in some countries/regions.

Digital Favourite list

To Do this

Create your Favourite list for the first

time

1 Press to select “Yes”.

2 Press the yellow button to select the Favourite list.

3 Press

F/f to select the channel you want to add, then press .

Channels that are stored in the Favourite list are indicated by a symbol.

Watch a channel

1 Press the yellow button to navigate through your Favourite lists.

2 Press while selecting a channel.

Turn off the Favourite list Press RETURN.

Add or remove channels in the currently

edited Favourite list

1 Press the blue button.

2 Press the yellow button to select the Favourite list you want to

edit.

3 Press

F/f to select the channel you want to add or remove,

then press .

Remove all channels from the current

Favourite list

1 Press the blue button.

2 Press the yellow button to select the Favourite list you want to

edit.

3 Press the blue button.

4 Press

G/g to select “Yes”, then press to confirm.

20

GB

Connecting optional equipment

You can connect a wide range of optional equipment to your TV.

Using Optional Equipment

For service

use only

Camcorder

Headphones

DVD player with component output

Digital audio component

Hi-Fi audio

equipment

DVD recorder

Decoder

VCR

Video game

equipment

DVD player

Decoder

PC

CAM Card

Audio system

PC (HDMI output)

Blu-ray disc player

DVD player

PC (HDMI output)

Blu-ray disc player

Camcorder

Audio system

DVD player

Digital still camera (HDMI output)

Strona jest ładowana ...

Sony KDL-40W3000 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Sony KDL-40W3000 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty