TP 300 dƌĂĸĐ Signal Light
USER´S MANUAL
LED & LED
Website: www.ledandled.se
Key Features:
1) Retrofit design & UV stabilized shell.
2) Wide viewing angle.
3) Even brightness & standard chromatogram.
4) Less than 1% light loss with single LED failure.
5) Up to 10 times longer lifetime than Incandescent.
6) Compatible with most of traffic housing and controllers.
7) 3-year warranty.
Emission
Color
LED
Quantity
Luminous
(cd)
Visual Angle Power
consumption Operating Temp Working
Voltage
L/R Down
Red ball 168 800 60 20 11
-40㹼+50 100-240VAC
50/60Hz
Yellow ball 168 800 60 20 11
Green ball 168 800 60 20 10.5
Red arrow 65 4000/m2 60 20 8.5
Yellow
arrow 65 4000/m2 60 20 8.5
Green
arrow 65 4000/m2 60 20 8
Red man 80 4000/m2 60 20 9.5
Green man 78 4000/m2 60 20 9
Vertical view
Back view
Front view of pedestrian lights
Side view of pedestrian lights
1. Connect the L-shape brackets to the PC modules.
2. Fasten them with screws.
1. Curve the sun visor and insert it in the slot.
2. Fasten them with screws.
1
2
34
Connect the background panel to the light fixture and fasten them with screws. (Finished as the drawing on
the right)
Connect the complete set to the lamp pole via mounting bracket and adjust the angle by the PC modules.
Vertical installation mode
Horizontal installation mode
Apply the rubber wire (spec: 2*1.0 mm2VDE 60245IEC57) for out wiring via the hole beside the
connection terminal.
Wiring procedure:
1) Open the module by pushing the metal clips and find the connection terminal.
2) Connect the outer wires to the terminals as follows.
BBE BBE BBE BBE BBE BBEBBE BBE BBE BBE BBEBBE BBE
Unit Packing: 1pc/carton
Outside Size(V3RYG): 1240*420*270mm
Outside Size(A3RYG): 1240*420*270mm
Outside Size(P3RG): 900*420*280mm
N.W./G.W.(V3RYG): 10.2/12kg
N.W./G.W.(A3RYG): 10.0/12kg
N.W./G.W.(P3RG): 6.8/8.5kg
Volume(m3) (V3RYG): 0.14
Volume(m3) (A3RYG): 0.14
Volume(m3) (P3RG): 0.105
Wrapper: Carton, foam
IP Rating IP55
WorkingHumidity 10%㹼90%RH
Vehicle Signal Packing List
1. User’s Manual
2. Installation supports
3. Vehicle aps
4. Decoration panel: 1 set (two rectangular pieces, two semi circular pieces)
5. Standard pieces for installing the panels:
(1) Tap screws Ø4×10, 11 (only 8 are needed)
(2) Screws, M4×8, 6 (only 4 are needed)
(3) Nuts, M4, 6 (only 4 are needed)
6. Standard pieces for installing the aps:
Self-tapping screws Ø4×10, 14 (only 12 are needed)
Pedestrian Signal Packing List
1. User’s Manual
2. Installation supports
3. Pedestrian signal aps
4. Standard accessories for installing the panels:
Self-tapping screws Ø4×10, 10 (only 8 are needed)
Maintenance: according to the quality of traffic light source and application environment, please clean
the light fixtures at least once every year.
Website: www.ledandled.se
E-mail: info@ledochled.se
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
