Ninebot Air T15 Instrukcja obsługi

Typ
Instrukcja obsługi
Producent zastrzega sobie prawo do wprowadzania zmian w produkcie, aktualizacji
oprogramowania i aktualizacji tej instrukcji obsługi w dowolnym momencie. Odwiedź stronę
www.segway.com lub sprawdź aplikację, aby pobrać najnowsze materiały użytkownika. Musisz
zainstalować aplikację, aktywować swojego KickScootera i uzyskać najnowsze aktualizacje i
zasady bezpieczeństwa.
www.segway.com K023P0283-A0
Ninebot KickScooter
User Manual
Air T15
Thanks for choosing the Ninebot KickScooter!
Thanks for choosing the Ninebot KickScooter (hereinafter referred to as KickScooter)!
Your KickScooter is a recreational transportation device with mobile connectivity, allowing you to connect
with other riders. Enjoy your ride and connect with riders worldwide!
2 Packing List
3 Diagram
Contents
01
03
04
06
07
08
09
11
15
18
19
22
23
Original Instructions * The picture is for reference only. Please refer to the actual product for more details.
4 Folding and Unfolding
6 Learning to Ride
7 Charging
8 Warnings
1 Riding Safety
5 Activate the KickScooter
9 Maintenance
10 Specifications
11 Certifications
12 Trademark and Legal Statement
13 Contact
1. The KickScooter is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot Inc.
(means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliates) nor Segway Inc. is responsible for any
injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document.
2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you
cannot eliminate all the risks. Remember that whenever you ride the KickScooter you risk injury from loss of control,
collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with
other vehicles, faster speeds require longer braking distance. Sudden braking on low traction surfaces could lead to
wheel slip, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when
riding. Be alert and slow down when entering unfamiliar areas.
3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin
strap in place, and provides protection for the back of your head.
4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles,
or other obstacles and potential hazards.
5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a
pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from
behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and
regulations if situation is different.
6. In places without laws comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc.
is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of
the safety instructions.
7. Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and
followed the New Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until they
are comfortable with the basic operation of the KickScooter. Make sure each new rider wears a helmet and other
protective gear.
8. Before each ride check for loose fasteners and damaged components. If the KickScooter makes abnormal sounds or
signals an alarm, immediately stop riding. Diagnose your KickScooter via the Segway-Ninebot App and call your
dealer/distributor for service.
9. Be alert! Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding
obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
10. To reduce risk of injury, you must read and follow all “CAUTION” , “WARNING” and "" notices in this document.
Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The
manufacturer recommends riders be 14+ years old. Always follow these safety instructions:
1 Riding Safety A. People who should not ride the KickScooter include:
i. Anyone under the influence of alcohol or drugs.
ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity.
iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain
balance.
iv. Anyone whose weight is outside the stated limits (see Specifications).
v. Pregnant women.
B. Riders under the age of 14 years old should ride under adult supervision.
C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do
not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and
could cause a fall.
11. Do not attempt to charge your KickScooter if, the charger or the power outlet, is wet.
12. As with any electronic device, use a surge protector when charging to help protect your KickScooter from damage
due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other
product models.
13. Use only Ninebot or Segway approved parts and accessories. Do not modify your KickScooter. Modifications to your
KickScooter could interfere with the operation of the KickScooter, could result in serious injury and/or damage, and
could void the Limited Warranty.
14. Children should not play with the KickScooter or parts of it nor should cleaning or maintenance be done by children.
The use of the machine results in the transmission of vibrations throughout the driver's body.
15. Always place the KickScooter on its kickstand on a flat and stable surface. The KickScooter must be placed with the
kickstand against the slope to prevent it from tipping over. Never place the KickScooter with the front facing down
the slope, which may cause your vehicle to tip over. Once the KickScooter is stably parked, check its stability to
avoid any risk of falling (by slip, wind or slight jolt). Do not park the KickScooter in a busy area, but rather along a
wall.
16. For a better riding experience, it is recommended to conduct a regular maintenance of the product.
17. Please read the user manual before charging the battery.
18. Do not touch the brake system, it could cause injuries.
19. The A-weighted emission sound pressure level is less than 70 dB(A). The mechanical vibrations transmitted by the
KickScooter are less than 2 5 m/s2.
01 02
2 Packing List
When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see Contact in the user manual). After
verifying that all components are present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power o your KickScooter and unplug the charge cable before assembling, mounting accessories, or
cleaning the mainframe.
User Manual ×1
USER MANUAL QUICK START
KickScooter KickScooter Case
Accessories
3 Diagram
Power Switch / Fender Brake:
Step on the Power Switch / Fender Brake to power on.
When power-on and speed is less than 1.9 mph (3 km/h), step on to turn on/off the headlight.
When power-on and speed is less than 1.9 mph (3 km/h), step on twice to switch speed modes.
Step on the Power Switch / Fender Brake 3 secs to power off.
The rear fender can be used as a brake. It is recommended to use together with the electric brake.
Ambient Light:
It will flash when the KickScooter is still and will always be on when riding.
Electric Honk:
Press the electronic throttle and electric brake together to honk.
Quick Start ×1
Limited
Warranty
Limited Warranty ×1 Battery Charger ×1
* It can be used for placing the KickScooter.
Please do not discard it.
Electronic Throttle
Electric Brake
Dashboard Foldable Handle
Pylon
Folding Switch
Headlight
Baseboard
Kickstand
Charge Port
Battery Compartment
Hub motor
* The color of ambient light can be customized via Segway-Ninebot App.
Ambient Light
Rear Light
Power Switch / Fender Brake
(multi-functional)
03 04
4 Folding and Unfolding
Dashboard
Unfolding
Folding
Speedometer: Display the current speed of the KickScooter, as well as error codes.
Error Display: The lit wrench icon indicates the scooter error.
Cruise Control: Enabled when riding at a constant speed for 5 secs. You can exit the mode by braking.
Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon
indicates that the vehicle is connected to a mobile device.
Overheat Warning: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is
lowered to normal range.
Battery Level: The total battery level equals to 4 bars. Each bar equates to approximately 25% battery level.
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
1. Press the folding switch and lift
up the pylon until you hear a
click.
2. Unfold the kickstand to support
the scooter. 3. Rotate both sides to align the
foldable handle.
* The KickScooter will power off once folded.
* Please press the upper folding switch.
1. Press the folding switch 2. Put down the pylon to the baseboard with the
sound of "click".
Pedestrian Mode
Modes: Step on the Power Switch / Fender Brake twice to switch between the four modes.
: Energy saving mode [Max. speed is 6.2 mph (10 km/h) with smooth acceleration, suitable for beginners];
: Standard mode [Max. speed is 9.3 mph (15 km/h)];
: Sport mode [Max. speed is 12.4 mph (20 km/h), powerful, only recommended for skilled riders].
Pedestrian mode: Max. speed is 3.7 mph (6 km/h) with flashing rear light.
Speedometer
Energy saving Mode
Standard Mode
Sport Mode
Cruise Control
Bluetooth
Headlight
Overheat Warning
Error Display
Battery Level
05 06
6 Learning to Ride
Wear an approved helmet and other protective
gear to minimize any possible injury.
Note: Please check the power level. Charge the
scooter if the battery level is low.
2. Stand stably on the baseboard with both
feet. Press the throttle to speed up when
you are balanced.
Note, For your safety, the motor will not
engage until the scooter reaches 1.86 mph
(3 km/h).
1. Stand on the baseboard with one foot
and push off with the other to start
gliding.
5 Activate the KickScooter
There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep constantly after
Power ON.
Until activated, the Kickscooter is limited to 9.3 mph (15 km/h) and cannot be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.1 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate
your KickScooter and enjoy the full performance.
Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
21 Install the App and register/login. Power on the KickScooter. A blinking
Bluetooth icon indicates the KickScooter is
waiting for a connection.
Segway-Ninebot App
3
4
Click “Vehicle”“Search vehicle” to connect to
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
You can also check the vehicle's status in App, and interact with other users. Have fun!
Vehicle Fans Moments MeDiscover
07 08
09 10
3. Slow down by releasing the throttle.
To stop, press the electric brake and
step on the fender brake at the same
time to trigger mechanical braking.
4. To turn, shift your body weight and
turn the handle slightly.
WARNING
When braking rapidly, you risk serious injury due to loss of traction and falls. Maintain a moderate
speed and look out for potential hazards.
7 Charging
Unfold the kickstand. Insert the charge plug, and
unplug your battery charger
when finished.
Kickstand
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle
charge).
WARNING
Do not charge if the charge port or charge cable is wet.
Do not charge or use your battery if it is damaged or see trace of water. Close the charge port cover when
not charging.
Do not charge outdoors.
Battery Charger
8 Warnings
DO NOT ride on public roads,
motorways, or highways.
Always wear a helmet when riding. DO NOT park in open air or outdoors.
DO NOT use mobile phone or wear
earphones when operating the KickScooter.
The KickScooter is for one rider only. DO
NOT carry any passengers. DO NOT carry
a child. DO NOT ride when pregnant.
DO NOT ride the scooter with only one foot
or one hand. DO NOT take your hands off
the foldable handle while riding.
Keep your speed between 3.1–6.2 mph
(5–10 km/h) when you ride through
speed bumps, elevator door stills, bumpy
roads or other uneven surfaces. Slightly
bend your knee to better adjust to
mentioned surfaces.
DO NOT press the Folding switch
when pushing or lifting KickScooter.
11 12
DO NOT wear high heels. Watch your head when passing
through doorways.
DO NOT ride the scooter in the rain.
Watch your speed when traveling downhill.
Use both brakes together when traveling
at high speed.
DO NOT press the throttle when
walking with the KickScooter.
DO NOT carry heavy objects on the
foldable handles.
DO NOT rotate the handle violently
while driving at high speed.
Avoid contacting obstacles with the
tire/wheel.
13 14
DO NOT ride up and down stairs or
jump over obstacles.
DO NOT ride through puddles or any
other (water) obstacles. In such a
case, please lower your speed and
bypass the obstacle.
DO NOT overtake.
DO NOT touch the hub motor after
riding because it can get hot.
9 Maintenance
Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Dirt is hard to remove that is can be scrubbed with a toothbrush and
toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances
may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power
washer or hose.
WARNING
Make sure the KickScooter is powered OFF, the charge cable is unplugged, and the rubber cap on the charge port is
tightly sealed before cleaning; otherwise you may damage the electronic components.
Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight
and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may
reduce battery life.
Replace the Tires
Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is
complicated and incorrect assembly can lead to instability and malfunctions:
– Please contact an authorized repairer if the product is still under manufacturer warranty. You can ask for the list of the
authorized repairers to the customer service available at www.segway.com.
– If the product is no longer under warranty you can contact any specialized repairer of your choice.
– Should you have questions, you can contact customer service available at www.segway.com.
Maintenance and Removal of the Battery
Do not remove the battery. Removing the battery is complicated and can alter its operation: You can contact an
authorized repairer if the product is still under warranty. If it is not, you can contact any specialized repairer of your
choice. You can ask for the list of the authorized repairers to the customer service available. For any further question,
you can contact the customer service.
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the
battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid
draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at
its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F
(-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises.
More details are available in the App.
NOTE
Typically, a fully charged battery should retain power for 120-180 days. A low-power battery should retain power for
30–60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent
damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage
caused by over-charging or under-charging will not be covered by the Limited Warranty.
WARNING
Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing.
Keep the battery contacts away from metal objects to prevent short circuit. Risk of fire. No user serviceable parts. Do
not charge or use your battery if it is damaged or see trace of water.
WARNING
Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because
low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage
due to slips or falls.
Others
The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be
discarded and replaced by a new one. Should you have questions, you can contact customer service available at
www.segway.com.
In case of an accident or breakdown, please contact an authorized repairer if the product is still under warranty. If not,
you can contact any specialized repairer of your choice. You can ask for the list of the authorized repairers from the
customer service available at www.segway.com.
Efforts have been made to simplify wording in the user manual. When an action appears too complicated, you are
advised to contact an authorized or a specialized repairer or customer service.
15 16
Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Dirt is hard to remove that is can be scrubbed with a toothbrush and
toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances
may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power
washer or hose.
WARNING
Make sure the KickScooter is powered OFF, the charge cable is unplugged, and the rubber cap on the charge port is
tightly sealed before cleaning; otherwise you may damage the electronic components.
Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight
and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may
reduce battery life.
Replace the Tires
Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is
complicated and incorrect assembly can lead to instability and malfunctions:
– Please contact an authorized repairer if the product is still under manufacturer warranty. You can ask for the list of the
authorized repairers to the customer service available at www.segway.com.
– If the product is no longer under warranty you can contact any specialized repairer of your choice.
– Should you have questions, you can contact customer service available at www.segway.com.
Maintenance and Removal of the Battery
Do not remove the battery. Removing the battery is complicated and can alter its operation: You can contact an
authorized repairer if the product is still under warranty. If it is not, you can contact any specialized repairer of your
choice. You can ask for the list of the authorized repairers to the customer service available. For any further question,
you can contact the customer service.
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the
battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid
draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at
its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F
(-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises.
More details are available in the App.
NOTE
Typically, a fully charged battery should retain power for 120-180 days. A low-power battery should retain power for
30–60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent
damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage
caused by over-charging or under-charging will not be covered by the Limited Warranty.
WARNING
Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing.
Keep the battery contacts away from metal objects to prevent short circuit. Risk of fire. No user serviceable parts. Do
not charge or use your battery if it is damaged or see trace of water.
WARNING
Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because
low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage
due to slips or falls.
Others
The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be
discarded and replaced by a new one. Should you have questions, you can contact customer service available at
www.segway.com.
In case of an accident or breakdown, please contact an authorized repairer if the product is still under warranty. If not,
you can contact any specialized repairer of your choice. You can ask for the list of the authorized repairers from the
customer service available at www.segway.com.
Efforts have been made to simplify wording in the user manual. When an action appears too complicated, you are
advised to contact an authorized or a specialized repairer or customer service.
10 Specifications
Dimensions
Machine
Battery
Motor
Charger
Features
Tire
Brake Light
Length x Width x Height
Payload
Rider Recommended Age
Required Height
Max. Speed
Typical Range [1]
Max. Slope
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Traversable Terrain
Max. Charging Voltage
Nominal Capacity 4000 mAh
Nominal Energy
Battery Management System
Input Voltage
Output Voltage
Output Current
Nominal Voltage
Nominal Power
Output Power
Approx. 36.9 × 15.7 × 40.0 in (936 × 398 × 1015 mm)
66.1–220.5 lbs (30.0–100.0 kg)
Approx. 7.5 miles (12 km)
Approx. 15%
36 V
14–104°F (-10–40°C)
-4–122°F (-20–50°C)
42 V
144 Wh
0.25 kW, 250 W
Over-heating, short circuit, over-current, over-discharge, and
over-charge protection
100–240 V
42 V
1.7 A
0.071 kW, 71 W
14–60 years
4’3”–6’6” (130–200 cm)
IPX4
Approx. 4 h
asphalt/flat pavement; obstacles < 0.4 in (1 cm);
gaps < 1.2 in (3 cm)
Approx. 12.4 mph (20 km/h)
LED rear light
Riding Modes
Tires
Pedestrian mode, Energy saving mode, Standard mode and
Sport mode
Tire diameter: Ø246±3 mm Cross section width: 58±2 mm
Tread pattern: Twill Inflation-free/filled with foaming PU
Folded: Length x Width x Height Approx. 40.3 × 8.0 × 8.8 in (1024 × 202 × 223 mm)
[1]
Typical Range: tested while riding under full power, 165.3 lbs (75.0 kg) load, 77°F (25°C), 7.5 mph (12 km/h) on average on pavement.
Product Model
Net Weight
Name Ninebot KickScooter
Air T15
Approx. 23.2 lbs (10.5 kg)
Item Parameter
17 18
11 Certifications
This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/UL 2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B)
“Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement."
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc.
or Ninebot. Such modifications could void the user's authority to operate the equipment.
FCC ID: 2ALS8-KS0002
IC: 22636-KS0002
19 20
Important WEEE information
WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product
should not be disposal with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible
to promote the sustainable reuse of materials resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take this product for environmen-
tal safe recycling.
Battery recycling information for the European Union
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment
2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines
the framework for the return and recycling of used batteries and accumulators as applicable throughout the European
Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather
reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are
labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also
include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium).
Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but
use the collection framework available to customers for the return, recycling, and treatment of batteries and
accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on
the environment and human health due to the potential presence of hazardous substances.
Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities,
the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators
for separate collection.
12 Trademark and Legal Statement
Ninebot is the registered trademark of Ninebot (Tianjin) Tech Co., Ltd; Segway and the Rider Design are the registered
trademarks of Segway Inc.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple
Inc., The respective owners reserve the rights of their trademarks referred to in this manual.
The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com.
We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of
printing. However, due to constant improvement of product features and changes of design, your KickScooter may
differ slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android)
to download and install the App.
Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions
mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and
functionality of the KickScooter product and documentation without prior notice.
© 2020 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.
21 22
Restriction of Hazardous Substances (RoHS) Directive
This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the require-
ments of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (“RoHS recast” or “RoHS 2”).
Radio Equipment Directive
Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands.
Hereby, [Ninebot (Changzhou) Tech Co., Ltd,] declares that the radio equipment type [Air T15] is in compliance with
Directive 2014/53/EU.
Bluetooth Max. RF Power
Frequency Band(s)
100mW
2.4000–2.4835GHz
13 Contact
Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your KickScooter.
Americas:
Segway Inc.
14 Technology Drive, Bedford, NH 03110, USA
Toll Free: 1-866-473-4929
Fax: 1-603-222-6001
Technical Support Email: [email protected]
Website: www.segway.com
Europe, Middle East and Africa:
Segway Europe B.V.Hogehilweg 8, 1101CC Amsterdam, The Netherlands
Website: www.segway.com
Have your KickScooter serial number on hand when contacting Segway.You can find your serial number on the
underside of your KickScooter or in the App under More Settings –> Basic Information.
23 24
The manufacturer reserves the right to make changes to the product, release firmware updates, and update this
manual at any time. Visit www.segway.com or check the App to download the latest user materials. You must install
the App, activate your KickScooter, and obtain the latest updates and safety instructions.
www.segway.com
Air T15
Ninebot KickScooter
Manuel utilisateur
2 Liste d'emballage
3 Diagramme
01
03
04
06
07
08
09
11
15
18
19
22
23
* La photo est pour référence seulement. Veuillez vous référer au produit réel pour plus de détails.
4 Pliage et dépliage
6 Apprendre à conduire
7 Chargement
8 Avertissements
1 Sécurité
5 Activez le KickScooter
9 Entretien
10 Spécifications
11 Certifications
12 Marque commerciale et déclaration juridique
13 Contact
Traduction des instructions originales
Nous vous remercions d'avoir choisi le Ninebot KickScooter Max (ci-après dénommé KickScooter)!
Votre KickScooter est un dispositif de transport élégant avec une application mobile vous permettant
de vous connecter à d'autres conducteurs.
Savourez le trajet et connectez-vous à des conducteurs à travers le monde!
Nous vous remercions d'avoir choisi le Ninebot KickScooter Max!
Sommaire
1 Sécurité
1. Le KickScooter est un dispositif de transport conçu pour la récréation. En maîtriser la conduite demande de
l'entraînement. Ninebot Inc. et Segway Inc. déclinent toute responsabilité en cas de blessure ou dommage causé
par le manque d'expérience d'un conducteur ou par le non-respect des instructions contenues dans ce document.
2. Veuillez noter qu'il est possible de réduire les risques en suivant l'ensemble des instructions et avertissements
contenus dans ce manuel, mais qu'il n'est pas possible d'éliminer tous les risques. Rappelez-vous que lorsque vous
utilisez le KickScooter, vous vous exposez à un risque de blessure en cas de perte de contrôle, collision ou chute.
Lorsque vous pénétrez des espaces publics, conformez-vous toujours aux lois et règlements applicables. Comme
pour les autres véhicules, la distance nécessaire au freinage augmente avec la vitesse. Un freinage brusque sur des
surfaces à faible adhérence peut entraîner un patinage des roues ou une chute. Soyez prudents et conservez
toujours une distance suffisante entre vous et les autres personnes ou véhicules lorsque vous conduisez. Soyez
attentifs et ralentissez lorsque vous pénétrez des lieux qui ne vous sont pas familiers.
3. Portez toujours un casque lorsque vous conduisez. Utilisez un casque homologué pour vélo ou skateboard, de taille
adaptée, avec la mentonnière en place, protégeant l'arrière de votre tête.
4. Ne réalisez pas votre premier essai dans un lieu où vous pourriez rencontrer des enfants, des piétons, des animaux
de compagnie, des véhicules, des cyclistes ou d'autres obstacles et dangers potentiels.
5. Respectez les piétons en leur laissant toujours la priorité. Doublez à gauche si possible. Lorsque vous approchez un
piéton de l'avant, restez à droite et ralentissez. Évitez de surprendre les piétons. Lorsque vous approchez par
derrière, annoncez-vous et ralentissez de sorte à atteindre une vitesse de marche pour doubler. Dans les autres
situations, veuillez respecter les lois et règlements concernant la circulation routière.
6. Dans les lieux où les lois ne s'appliquent pas, respectez les consignes de sécurité présentées dans ce manuel.
Ninebot Inc. et Segway Inc. déclinent toute responsabilité en cas de dommages matériels, dommages corporels/
décès, accidents ou litiges juridiques résultant de violations des consignes de sécurité.
7. Ne permettez à personne d'utiliser votre KickScooter seul à moins qu'il ou elle n'est lu attentivement ce manuel et
suivi le tutoriel Nouveau conducteur dans l'application. La sécurité des nouveaux utilisateurs relève de votre
responsabilité. Aidez les nouveaux utilisateurs jusqu'à ce qu'ils soient à l'aise avec le maniement de base du
KickScooter. Assurez-vous que chaque nouvel utilisateur porte un casque et d'autres équipements de protection.
8. Avant chaque utilisation, assurez-vous qu'il n'y ait pas fixations desserrées et de composants endommagés. Si le
KickScooter produit des bruits anormaux ou émet une alarme, cessez immédiatement l'utilisation. Effectuez un
diagnostic de votre KickScooter via l'application Segway-Ninebot et appelez votre revendeur-/-distributeur pour la
réparation.
9. Soyez attentifs! Regardez au loin et devant votre KickScooter: vos yeux sont votre meilleur outil sécurité pour éviter
les obstacles et les surfaces à faible traction (y compris, mais sans s'y limiter, les sols mouillés, le sable, le gravier et
le verglas).
10. Pour réduire le risque de blessure, vous devez lire et suivre tous les avis «ATTENTION» et «AVERTISSEMENT» dans
ce document. Ne conduisez pas à une vitesse dangereuse. Vous ne devez conduire en aucune circonstance sur la
route avec des véhicules motorisés. L’âge recommandé par le fabricant est de 14+ ans. Suivez toujours les
consignes de sécurité:
A. Les personnes devant s'abstenir de conduire le KickScooter incluent:
i. Toute personne se trouvant sous l'emprise de l'alcool ou de drogues.
ii. Toute personne souffrant d'une maladie qui la met en danger lorsqu'elle pratique une activité physique
intense.
iii. Toute personne ayant des problèmes d'équilibre ou d'habileté motrice pouvant lui faire perdre l'équilibre.
iv. Toute personne dont le poids est en dehors des limites indiquées (voir Spécifications).
v. Les femmes enceintes.
B. Les conducteurs de moins de 14 ans doivent être supervisés par un adulte.
C. Conformez-vous aux lois et règlements applicables lorsque vous utilisez ce produit. Ne conduisez pas sur des
sites interdits par les lois applicables.
D. Pour conduire de manière sûre, vous devez être en mesure de voir clairement ce qui se trouve devant vous et
vous devez être clairement visible pour les autres.
E. Ne conduisez pas dans la neige ou sous la pluie ou sur des chaussées mouillées, boueuses, glacées ou glissantes,
pour quelque raison que ce soit. Ne conduisez pas sur des obstacles (sable, gravier ou bouts de bois). Cela pourrait
causer une perte d'équilibre ou de traction pouvant entraîner une chute.
11. N'essayez pas de charger votre KickScooter si ce dernier, le chargeur ou la prise de courant est mouillé(e).
12. Comme pour tout appareil électronique, utilisez un dispositif antisurtension lors de la charge pour protéger votre
KickScooter de tout dommage dû aux pics d'intensité et pointes de tension. Utilisez uniquement le chargeur fourni
par Segway. N'utilisez pas de chargeur conçu pour un modèle différent.
13. Utilisez uniquement des pièces et accessoires homologué(e)s par Ninebot ou Segway. Ne modifiez pas votre
KickScooter. Le fait d'apporter des modifications à votre KickScooter peut nuire au bon fonctionnement du
KickScooter, peut entraîner des blessures et/ou dommages graves et peut entraîner la révocation de la Garantie
limitée.
14. Les enfants ne peuvent jouer avec la trottinette ou des parties de celle-ci. Le nettoyage ou l'entretien ne peut être
effectué par des enfants. L'utilisation de la machine entraîne la transmission de vibrations dans l'ensemble du
corps du conducteur.
15. Placez toujours la trottinette sur sa béquille sur une surface plane et stable. La trottinette doit être placée avec la
béquille à contre-pente afin d’éviter tout basculement. Ne placez jamais la trottinette avec l'avant face à la pente,
la béquille pourrait se refermer et faire basculer la machine. Une fois la trottinette sur sa béquille, vérifiez sa
stabilité afin d’éviter tout risque de chute (par glissement, vent ou léger à-coup). Ne stationnez pas la trottinette
dans un endroit passant mais privilégiez plutôt le long d’un mur. Dans la mesure du possible, choisissez toujours
de stationner sa trottinette sur un sol plat.
16. Pour une meilleure expérience de conduite, il est conseillé d'effectuer l'entretien régulier du produit.
17. Veuillez lire le manuel d'utilisation avant de charger la batterie.
18. Ne touchez pas au système de freinage, cela peut entraîner des blessures.
19. Le niveau de pression acoustique d'émission pondéré A est inférieur à 70 dB (A). Les vibrations mécaniques
transmises par le KickScooter sont inférieures à 2,5 m/s2.
01 02
Lorsque vous déballez votre KickScooter pour la première fois, veuillez vérifier que les articles ci-dessus sont inclus dans
l'emballage. S'il vous manque des composants, veuillez contacter votre revendeur/distributeur ou le centre de service le
plus proche (voir la section Contacts du manuel utilisateur). Après avoir vérifié que tous les composants sont présents et
en bon état, vous pouvez assembler votre nouveau KickScooter.
Veuillez conserver la boîte et l'emballage au cas où vous auriez besoin de faire expédier votre KickScooter à l'avenir.
Rappelez-vous d'éteindre votre KickScooter et de débrancher le cordon d'alimentation avant l'assemblage, le montage des
accessoires ou le nettoyage de la pièce centrale.
Manuel Utilisateur ×1
MANUEL UTILISATEUR
DÉMARRAGE RAPIDE
Accessoires
Interrupteur d'alimentation/Frein d'aile :
Appuyez sur l'interrupteur/le frein d'aile pour mettre en marche.
Lorsque le moteur est allumé et que la vitesse est inférieure à 3 km/h, appuyez sur le bouton pour allumer ou
éteindre le phare.
Lorsque le moteur est allumé et que la vitesse est inférieure à 3 km/h (1,9 mph), appuyez deux fois sur le bouton
pour changer de mode de vitesse.
Appuyez sur l'interrupteur d'alimentation/ le frein d'aile pendant 3 secondes pour couper l'alimentation.
L’aile arrière peut être utilisée comme frein. Il est recommandé de l’utiliser ensemble avec le frein électronique.
Lumière ambiante :
Il clignotera lorsque le KickScooter est immobile et restera allumé lors de la conduite.
Klaxon électrique :
Appuyez ensemble sur l'accélérateur électronique et le frein électronique pour klaxonner.
Accélérateur électronique
Interrupteur d'alimentation/Frein d'aile
(multifonctions)
Marche Frein électronique
Tableau de bord Poignée pliable
Pylône
Levier de pliage
Phare avant
Lumière ambiante
Plinthe
Béquille
Port de charge Feu arrière
Réceptacle de la batterie
Moteur du
moyeu
Démarrage Rapide ×1
2 Liste d'emballage 3 Diagramme
Chargeur de batterie ×1
KickScooter assemblé Boîte de stockage
KickScooter
*Il peut être utilisé pour placer le
KickScooter. Veuillez ne pas le jeter.
Limited Warranty ×1
GARANTIE LIMITÉE
* La couleur de la lumière ambiante peut être personnalisée via l’application Segway-Ninebot.
03 04
Tableau de bord
Compteur de vitesse : Indique la vitesse actuelle. Affiche également les codes d'erreur lorsque des
problèmes sont détectés.
Erreur : L'icône de la clé indique que le scooter a détecté une erreur.
Bluetooth : Une icône Bluetooth clignotante indique que le véhicule est prêt à être connecté. Une icône
Bluetooth fixe indique que le véhicule est connecté à un appareil mobile.
Avertissement de surchaue : l'icône du thermomètre toujours allumée indique que la température de la batterie a
atteint 50°C.
* À ce stade, le véhicule ne peut pas accélérer normalement et ne peut pas être chargé. Ne l'utilisez pas tant que la température
n'est pas revenue à la normale.
Régulateur de vitesse : Activé lorsque vous roulez à vitesse constante pendant 5 secondes. Vous pouvez
quitter le mode en freinant.
Niveau de puissance : Le niveau total de la batterie équivaut à 4 barres. Chaque barre équivaut à environ 25 % de
niveau de puissance.
* La puissance de la batterie est très faible lorsque la première barre de batterie est rouge. Veuillez recharger votre
KickScooter immédiatement.
Mode piéton
Modes : Appuyez deux fois sur l'interrupteur d'alimentation / le frein d'aile pour passer d'un mode à l'autre.
: Mode d’économie d’énergie [La vitesse maximale est de 6.2 mph (10 km/h) avec une accélération en douceur, adaptée
aux débutants];
: Mode standard [La vitesse maximale est de 9.3 mph (15 km/h)];
: Mode sport [La vitesse maximale est de 12.4 mph (20 km/h), puissant, recommandé uniquement pour les conducteurs
expérimentés].
Compteur de vitesse
Mode d’ économie d’ énergie
Mode standard
Mode sport
Bluetooth
Régulateur de vitesse
Phare avant
Avertissement de surchauffe
Erreur
4 Pliage et dépliage
Niveau de puissance
Dépliage
Repliement
1. Appuyez sur le levier de pliage et
soulevez le pylône jusqu’à ce
que vous entendiez un clic.
2. Déplier la béquille pour soutenir
le scooter. 3. Faire pivoter les deux côtés
pour aligner la poignée pliable.
1. Appuyez sur le levier de pliage. 2. Posez le pylône à la plinthe avec le son du « clic ».
Mode piéton: La vitesse maximale est de 3.7 mph (6 km/h) avec un feu arrière clignotant.
* Veuillezappuyer sur le levier de pliage
supérieur.
* Le KickScooter s’éteint une fois plié.
05 06
5 Activez le KickScooter
21 Installez l'application et inscrivez-vous ou
identifiez-vous.
Allumez le KickScooter. Une icône
Bluetooth clignotante indique que le
KickScooter est en attente de connexion.
3
4
Cliquez sur «Rechercher un véhicule» pour vous
connecter à votre KickScooter. Le KickScooter
émet un son lorsque la connexion est réussie.
L'icône Bluetooth arrête de clignoter et reste
illuminée.
Suivez les instructions de l'application pour activer le KickScooter et apprenez comment le manier avec
prudence.
Vous pouvez maintenant commencer à utiliser votre KickScooter, vérifiez le statut dans l'application et
interagissez avec les autres utilisateurs. Amusez-vous bien!
Vehicle Fans Moments MeDiscover
6 Apprendre à conduire
Le fait d'apprendre à utiliser le KickScooter pose des risques de sécurité.
Lisez les Sécurité dans la conduite dans l'application avant votre première utilisation.
Pour votre sécurité, votre KickScooter n'est pas activé et il émettra occasionnellement un
son après l'avoir mis sur ON.
Tant qu'il n'est pas activé, le KickScooter conserve une vitesse de marche très faible et ses
pleines fonctionnalités ne peuvent pas être utilisées.
Installez l'application sur votre appareil mobile (avec Bluetooth 4.0 ou ultérieur),
connectez-le au KickScooter par Bluetooth, et suivez les instructions de l'application pour
activer votre KickScooter pour bénéficier de la pleine performance.
Scannez le code QR pour télécharger l'application.
Segway-Ninebot App
Remarque: Veuillez vérifier le niveau de batterie sur
l'écran. Chargez le scooter si le niveau
de la batterie est faible.
Portez un casque homologué et d’autres
équipements de protection afin de minimiser
toute blessure éventuelle.
1. Tenez-vous sur l'appui-pieds avec un
pied et poussez avec votre autre pied
pour commencer à glisser.
2. Placez votre autre pied sur l'appui-pieds pour
assurer la stabilité des deux pieds. Appuyez sur
l'accélérateur de la main droite pour accélérer
lorsque vous avez trouvé votre équilibre.
Remarque: pour assurer votre sécurité, le
moteur ne s'embrayera pas jusqu'à ce que le
KickScooter atteigne la vitesse 1.86 mph
(3 km/h).
07 08
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Ninebot Air T15 Instrukcja obsługi

Typ
Instrukcja obsługi