Novus 2000 Series Instrukcja obsługi

U s e r ’s m a n u a l

2000 series IP camera

IP 2000 series camera - user manual ver. 2.0

2

1. START-UP AND INITIAL CAMERA CONFIGURATION ...................................... 4

1.1. Starting the IP camera .......................................................................................... 4

1.2. Initial configuration via the web browser ............................................................ 5

2. NETWORK CONNECTION UTILIZING WEB BROWSER ................................... 6

2.1. Connection with IP camera via web browser ....................................................... 6

3. WWW INTERFACE ...................................................................................................... 8

3.1. The Remote Preview Interface ............................................................................. 8

4. CAMERA OPERATION MODE - PLAYBACK ....................................................... 11

5. CAMERA CONFIGURATION MODE - REMOTE SETTING............................... 12

5.1. A group of settings "Display"............................................................................. 13

5.1.1. „Live” Menu .......................................................................................... 13

5.1.2. „Image Control” Menu .......................................................................... 13

5.1.3. „Privacy Zone” Menu. ........................................................................... 14

5.1.4 „ROI” Menu (Region Of Interest) .......................................................... 15

5.2. A group of settings "Record" ............................................................................. 16

5.2.1. „Record Parameters” Menu ................................................................... 16

5.2.2. „Schedule” Menu .................................................................................. 16

5.3. A group of settings "Network" ........................................................................... 17

5.3.1. „Network Setting” Menu ....................................................................... 17

5.3.2. „Video Streaming” Menu ...................................................................... 17

5.3.3. „Email” Menu ...................................................................................... 19

5.3.4. „DDNS” Menu ...................................................................................... 19

5.3.5. „IP Filter” Menu .................................................................................... 19

5.3.6. „RTSP” Menu ........................................................................................ 19

5.3.7. „FTP” Menu ........................................................................................... 19

5.4. A group of settings „Alarm” .............................................................................. 20

5.4.1. „Motion” Menu ...................................................................................... 20

5.4.2. „Alarm” Menu ........................................................................................ 21

5.4.3. „Lens Shade” Menu ............................................................................... 21

TABLE OF CONTENTS

IP 2000 series camera - user manual ver. 2.0

3

5.5. A group of settings „Device” ............................................................................. 22

5.5.1. „SD Card” Menu ............................................................................ 22

5.5.2. „Audio” Menu ................................................................................ 22

5.5.3. „Log” Menu .................................................................................... 22

5.5.4. „Cloud Storage” Menu ................................................................... 23

5.6. A group of settings „System” ............................................................................ 24

5.6.1. „General” Menu ............................................................................. 24

5.6.2. „Users” Menu ................................................................................. 25

5.6.3. „Info” Menu ................................................................................... 25

5.7. A group of settings „Advanced” ........................................................................ 26

5.7.1. ”Firmware Update” Menu .............................................................. 26

5.7.2. „Load Default” Menu ..................................................................... 26

5.7.3. „Maintain” Menu ............................................................................ 26

5.8. A group of settings „Intelligent” ........................................................................ 27

5.8.1. „Schedule” Menu ........................................................................... 27

5.8.2. „Detection” Menu ........................................................................... 27

5.8.2.1. „Perimeter Intrusion Detection” Menu ....................... 28

5.8.2.2. „Line Crossing Detection” Menu ................................ 30

5.8.2.3. „Stationary Object Detection” Menu .......................... 32

5.8.2.4. „Pedestrian Detection” Menu ...................................... 34

5.8.2.5. „Face Detection” Menu ............................................... 36

5.8.2.6. „Cross Counting” Menu .............................................. 38

5.8.3. „Analysis” Menu ............................................................................ 40

6. CAMERA CONFIGURATION MODE - LOCAL SETTING ................................. 41

TABLE OF CONTENTS

IP 2000 series camera - user manual ver. 2.0

4

START-UP AND INITIAL CAMERA CONFIGURATION

1. START-UP AND INITIAL CAMERA CONFIGURATION

1.1. Starting the IP camera

To run NOVUS IP camera you have to connect ethernet cable between camera and network switch.

To power it up you can connect it directly via power supply adapter with parameters compatible with

camera power supply specification, or camera can be powered with PoE (IEEE 802.3af ) compatible

switch.

After connecting power supply it takes about 30 seconds to start camera. Then You can proceed to

connect to the camera via web browser.

The recommended way to start an IP camera and perform its configuration is a connection directly

to the network switch which is not connected to other devices. To obtain further information about

network configuration parameters (IP address, gateway, network mask, etc.) please contact your

network administrator.

• Connection utilising network switch with PoE support

• Connection utilising external power supply and network switch

Computer

IP camera

Power supply and network

transmission

Network transmission

Network PoE switch

IP camera

Network transmission

Network switch

Computer

IP 2000 series camera - user manual ver. 2.0

5

START-UP AND INITIAL CAMERA CONFIGURATION

• Connection utilising external power supply directly to the computer

1.2. Initial configuration via the web browser

The default network settings for 2000 series IP camera are:

1. IP address= 192.168.1.200

2. Network mask - 255.255.255.0

3. Gateway - 192.168.1.1

4. User name - root

5. Password - pass

Knowing the camera’s IP address you need to appropriately set PC IP address, so the two devices can

operate in one network subnet ( e.g. for IP 192.168.1.1, appropriate address for the camera ranges from

192.168.1.2 to 192.168.1.254, for example 192.168.1.60). It is not allowed to set the same addresses for

camera and PC computer

You can either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera

yourself or select DHCP mode (DHCP server is required in this method in target network) by using

web browser or by NMS software. When you use DHCP server check IP address lease and its linking

with camera MAC address to avoid changing or losing IP address during device operation or network/

DHCP server breakdown. You have to remember to use a new camera IP address after changing

network parameters.

After network setting configuration has been done, the camera can be connected to a target network.

IP Camera

Network transmission - cross over cable

Computer

IP 2000 series camera - user manual ver. 2.0

6

NETWORK CONNECTION UTILIZING WEB BROWSER

2. NETWORK CONNECTION UTILIZING WEB BROSWER

2.1. Connection with IP camera via web browser

You have to enter camera IP address in the address bar. When you connect to the camera, web browser

will download the applet for displaying images from the camera. In Internet Explorer before the first

logon you need to install “SurveillancePlugin.exe.” addition. To do this, please click on the link

“Download” and when you get the download window, click “Run” button.

When the addition installer window appears, temporarily close the browser and click “Install” button.

After installation, launch a web browser and connect to the camera.

IP 2000 series camera - user manual ver. 2.0

7

NETWORK CONNECTION UTILIZING WEB BROWSER

If the installation fails, changing security settings for the IE browser is required. In order to do that,

please choose: Tools > Internet options > Security tab > Custom level and:

• Under Download unsigned ActiveX controls - select either Enable or Prompt

• Under Initialize and script ActiveX controls not marked as safe - select Enable or Prompt

You can also add the camera’s IP address to “trusted zone” and set lowest security level for it.

In addition, when working in Windows Vista / 7 / 8 the ActiveX applet may be blocked by Windows

Defender or User account control. In such case you should allow to run this applet, or simply disable

these functions.

When the addition is installed it will be possible to log into the camera. On the login page, enter your

login information. Here you can also change the language of the camera interface.

For safety reasons, we recommend to change the default values. New user name and password should

be remembered or saved in a safe place.

The default (factory) login is: user name - root, password - pass

IP 2000 series camera - user manual ver. 2.0

8

WWW INTERFACE - MAIN WINDOW

3. WWW INTERFACE

3.1. The Remote Preview Interface

In subsequent chapters are described all the functionality present in 2000 series cameras.

Depending on your camera model and/or firmware version, some features may not be

available or not supported. Detailed information about the features of the camera are

included in the quick start guide supplied with the camera.

6.

8.

7.

3. 4.

5.

2. 1.

9.

IP 2000 series camera - user manual ver. 2.0

9

WWW INTERFACE - MAIN WINDOW

1. Button that enables the image display options panel:

2. The selection buttons to select the stream to be displayed in the Remote Preview window.

3. Live Preview window.

Double-clicking on the live view window enables the display of the image on the full screen.

4. Buttons for selecting the operating mode and configure the camera:

Live - enables preview live stream

Playback - displays the playback panel

Remote Setting - displays the configuration panel camera

Local Setting - displays the configuration panel of paths to snapshots folders

5. Icon to access to the camera:

- displays information about the logged in user and the version of the applet

- logout from the camera

"Mount type" - icons for determining the way of

mounting the camera. The right choice affects the

selection of image geometry correction and

allows to display it with as little distortion as

possible

"Display mode" - icons for choosing how to

display the image. The type and number of

available display options depends on the chosen

installation location.

IP 2000 series camera - user manual ver. 2.0

10

WWW INTERFACE - MAIN WINDOW

6. Enable/disable panels to set the image parameters and lens control:

7. Enable/disable live preview

8. Buttons to set the size and aspect ratio

9. Additional features control icons:

- enable/disable the lens control panel - enable/disable the image adjustment panel

The panel is able to adjust the hue,

brightness, contrast, color saturation and

sharpness (clarity).

The panel is able to adjust the field of view

(zoom) and focus

- sets the original aspect ratio

- fits the image to the browser window

- sets full screen

- enables and disables enlarge the picture

- enables and disables the record a video stream on your computer

- performs a screenshot and saves on your computer

- option inactive

- enables and disables audio transmission

IP 2000 series camera - user manual ver. 2.0

11

4. CAMERA OPERATION MODE - PLAYBACK

Playback tab allows play and manage recordings that the camera writes to the memory card (for

models that have such functionality).

1. A player calendar - allows to search recordings (the date on which recordings are available for

playback is marked with a green triangle ). After selecting a date, from the drop-down list

“Type”, select the kind of recording to search and then click Search button.

2. A player control buttons, from left:

- Play/Pause button

- Stop button

- Forward-one-frame button

- Record button to select a fragment of the recordings to be saved on your computer *

- Capture button to save on your computer currently displayed frame *

- Download button to download to PC a block of recordings. After pressing opens another

window, where is possible to choose corresponding fragment recordings for download *

WWW INTERFACE - WORKING WITH CAMERA

5. 4. 3.

2.

1.

* a parameter configuration of video clips, screenshots, and downloading can be done in the

Local Setting tab

IP 2000 series camera - user manual ver. 2.0

12

- button for changing the playback speed. After pressing it, the options for choosing the playback

speed, from x1 / 8 to x8, are displayed

3. Recordings timeline. Recordings in continuous mode are shown in green color, and in alarm

mode - in blue color. You can change the range of time axis for precise selection of recordings -

using the mouse wheel or using the zoom buttons on the left side of the timeline.

4. Preview window. Double-clicking by left mouse button on the preview window enables and

disables displaying of the image on the full screen.

5. Additional function buttons, from left:

- Zoom button enables and disables the zooming part of the image. Zooming is done by selecting

the part of the image with the mouse left button pressed. Pressing the right button restores the

original image size.

- sets the original aspect ratio

- fits the image to the browser window

- sets full screen

5. CAMERA CONFIGURATION MODE - REMOTE SETTING

This tab allows the user to modify and configuration of all parameters and camera settings, available

in the particular model. Most of the settings can be changed in a convenient and safe manner,

selecting the parameter value from the drop-down list. In the case of fields allow to enter your own

parameter is specified allowable range.

However, any changes should be made prudently, so as not to cause loss of flow or communication

with the camera.

WWW INTERFACE - WORKING WITH CAMERA

Please note that in order to changes were visible (or applied), pressing the Save button located on

each tab (except the Log, Info and Firmware Upgrade tabs) - before closing it is needed.

IP 2000 series camera - user manual ver. 2.0

13

WWW INTERFACE - WORKING WITH CAMERA

5.1. A group of settings "Display"

This tab allows to modify image parameters.

5.1.1. „Live” Menu

This tab allows to give the camera its own name, enable and disable displaying the camera name and

the date, the selection of the video system and the configuration of the on-screen display OSD (can

adjust the position of the OSD and the degree of transparency).

5.1.2. „Image Control” Menu

This tab allows to modify the settings associated with the image.

IR-CUT Mode - choice of camera operating mode. Available options: Auto, Color Mode, Black-

White Mode

IR-CUT Delay - setting the time delay between turning on/off IR illuminator and switching the

camera operating mode. The adjustment range of delay: 2 ~ 36 sec.

IR-LED - set the mode of IR illuminator. Available options: Auto - Illuminator works

autonomously and turns on and off according to lighting changes, On - illuminator is always on,

Off - Illuminator is always off.

D<->N Autofocus - enables/disables automatic focusing after changing the camera operating

mode *

Lens Flip, Angle Flip, Corridor Mode, Angle Rotation - options to modify the displaying of the

image

Back Light - rear backgrounds compensation function that eliminates the effect resulting from

observing the area with too strong light source in the background. After selecting Enable an

additional drop-down list BLC appears, where you can choose the strength of the function.

IP 2000 series camera - user manual ver. 2.0

14

WWW INTERFACE - WORKING WITH CAMERA

3D Noise Reduction - we have the ability to set three modes: Auto - camera automatics decides to

enable reduction and by slider Level can specify the maximum correction, Manual - manually

adjust the level of noise correction and Disable - digital noise reduction is turned off.

WDR - enables or disables the WDR (Wide Dynamic Range) function.

AGC - defines the strength of the AGC. Available options: Off, Low, Middle, High

White Balance - allows to set way of working a white balance automation. Available options:

Auto - automatics itself corrects the color balance, Manual - after selecting this option, the sliders

to manually adjust the level of color components appears, Indoor - an option dedicated when the

camera works inside the room

Shutter - allows selection of shutter mode. Available options: Auto and Manual. When set to

Manual, an additional drop-down list appears, allowing you to select a specific shutter speed

value.

Time Exposure - function closely associated with option Shutter: when the Shutter option is set to

Manual, AE takes as a fixed value selected shutter speed.

Defog Mode - feature to improved visibility in bad weather (fog, rain etc). Available options:

Disable, Auto, Manual. If you select Manual the slider appears for setting the strength of the

function.

5.1.3. „Privacy Zone” Menu

This tab allows to enable up to four independent privacy zones.

* function Autofocus D<->N only works on cameras equipped with a motor-zoom lens. Function

operation is strongly dependent on brightness and kind of observed scene and in some cases

correct sharpening the image with this function can be disrupted (focus may not be set correctly).

In this case, disable this function.

IP 2000 series camera - user manual ver. 2.0

15

WWW INTERFACE - WORKING WITH CAMERA

To activate the particular zone select the check box Privacy Zone, and then select part of an image to

hide by setting the red rectangle of an appropriate size (this is done by dragging on the preview window

with the left mouse button pressed). After setting all privacy zones save the changes.

When set, privacy zones can be modified at any time. To do this, select the zone to be modified by

clicking the left mouse button (on the zone yellow frame will appear). Then, selected zone can be

moved to another location by dragging it, can be resized by grasping the edge of the zone and setting as

needed, or can by deleted by clicking on the Delete button.

5.1.4. „ROI” Menu (Region Of Interest)

This tab allows to set the "areas of interest" for the streams.

This tab allows to define up to eight regions of interest. To activate the appropriate region must first

select the stream in which will be operate ROI option, then select the region ID from the list, activate

an area by selecting Enable, and then select the appropriate part of an image by setting the red rectangle

of an appropriate size (this is done by dragging on the preview window with the mouse left button

pressed). Next, you should choose frames per second for the parts of the image that are outside the

region of interest and set the compression level for ROI.

Properly configured ROI function allows to keep the best recording quality in parts of the

monitored scene indicated by the user while reducing overall data stream. The ROI supports the

economic recording of recordings and also affects the size of the video files.

IP 2000 series camera - user manual ver. 2.0

16

WWW INTERFACE - WORKING WITH CAMERA

5.2. A group of settings "Record"

This tab allows to modify the recording options (for models that have this functionality).

5.2.1. „Record Parameters” Menu

This menu allows to enable/disable recording to the SD card, turn on/off prerecording and choose the

stream for recording (Main Stream or Sub Stream).

5.2.2. „Normal Schedule” Menu

This menu allows to configure the recordings schedule .

In the schedule can be set up recordings schedules for three events: normal recording (green color),

recording the events of motion detection (yellow color), recording the events of alarm input/output

(red color) *.

Recordings can be configured independently for each day in intervals of 30 minutes.

The enabling of continuous recording is indicated by the red letter R

* recording the events of alarm input/output is possible only for cameras equipped with alarm

inputs/outputs. Otherwise, this option is inactive.

IP 2000 series camera - user manual ver. 2.0

17

5.3. A group of settings "Network"

The menu allows to configure network settings and video streams settings

5.3.1. „Network Setting” Menu

This tab allows to modify network parameters of the camera.

The camera allows to set a method for obtaining of IP address (Static, PPPoE, DHCP), network ports,

network parameters (IP address, mask, gateway, DNS server addresses), and enable/disable UPNP

services.

5.3.2. „Video Streaming” Menu

This tab allows to modify the settings of camera streams.

WWW INTERFACE - WORKING WITH CAMERA

We do not recommend using the DHCP servers in the network monitoring devices. For optimum

quality and reliability is advisable to use a static IP network settings.

IP 2000 series camera - user manual ver. 2.0

18

In the Video Streaming menu, can be changed the stream parameters for each video stream. The stream

for configuration is selected by buttons at the top of the page.

Resolution - the resolution of configured video stream. The camera supports three video streams

simultaneously and each can be individually configured. This allows e.g. to set a high-quality stream

for archival video and a second stream in lower quality, to displaying "live" video.

FPS (frames per second) - select the number of frames per second from the available range

Video Code Type - a choice of standard encoding the video stream. Available options H264 and H265

Video Code Level - allows to set one of the available profiles (Baseline, Main Profile, High Profile)*

I Frame Interval - time interval between key frames. For higher bitrates, key frames interval should be

smaller. Smaller frame interval is recommended to increase position accuracy of return video and

advantageous to the network video. If frame interval become small, the video streaming will become

bigger, but the image quality will become better.

Bitrate Control - there are two types of bit rates: CBR (constant bit rate) and VBR (variable bit rate).

When the VBR is selected, from the drop-down list below you can choose the level of quality of the

video stream (options from Lowest to Best). If you select CBR, this list does not appear.

Bitrate - allows to select bitrates from a list of available values (Pre_Defined option), or manually enter

the desired bitrate, from the acceptable range (User_defined option).

Bitrate parameter has a different function, depending on the option selected in position Bitrate Control:

when the VBR is selected sets the maximum size of the data stream with a variable bit rates, while the

CBR is selected, sets the specific size of the data stream with a constant bit rates.

All of the above options are available for each of the three streams generated by the camera.

WWW INTERFACE - WORKING WITH CAMERA

* profiles Baseline, Main Profile and High Profile are available only for coding standard H264.

For standard H265 is available only Main Profile.

IP 2000 series camera - user manual ver. 2.0

19

5.3.3. „Email” Menu

This menu allows to set parameters for e-mail message, which the camera can send when an event

occurs. Here should be given the parameters and settings of the sender and recipient, and the interval of

sending e-mails. After configuring settings is the ability to send a test mail for verify.

In the subject sent email the camera gives the type of event that caused the sending and a photo is

attached.

5.3.4. „DDNS” Menu

This menu allows to configure the DDNS service (prerequisite is to have an account with an available

DDNS services).

5.3.5. „IP Filter” Menu

This menu allows to create and manage a list of IP addresses. It is possible to create a list of addresses

that are allowed to connect to the camera (i.e. White List, option Allow the setted IP addresses). After

creating such a list camera will not accept any of the connections from the an IP address that is not on

the list. If you create a list of addresses from which connection to the camera is not allowed (i.e. Black

List, option Ban the setted IP addresses), you can connect the camera from the each address, with the

exception of those that are on the list. The Allow all IP connection option allows to freely connect to

the camera.

5.3.6. „RTSP” Menu

This menu allows to enable/disable the RTSP protocol and port setting. It is also possible to enable or

disable the need to log in while downloading/viewing RTSP video stream (User Verification option).

5.3.7. „FTP” Menu

This menu allows to configure the camera to send images to an FTP server when an event occurs.

WWW INTERFACE - WORKING WITH CAMERA

When login is required (User Verification option Enabled), you will need to log in with the

camera administrator (root) password, to play the RTSP stream on the external device/player.

IP 2000 series camera - user manual ver. 2.0

20

5.4. A group of settings „Alarm”

This menu allows to configure alarm events.

5.4.1. „Motion” Menu

This tab allows to configure options for motion detection.

The camera allows to configure multiple motion detection zones, limit is only their size - they must fit

on the area of the image. To set the area of motion detection, select Enable and then mark the desired

part of the image by setting the red rectangle of an appropriate size (this is done by dragging on the

preview window with the mouse with left button pressed). The next step is to set the sensitivity of

motion (option Sensitivity), and then set camera response to an event of motion detection, by selecting

Send Email and/or Send to the cloud, Send to FTP, Enable Record, Alarm Out*. Also an alarm duration

can be set (range 5 - 30 s). To change the size or shape of the area of motion detection, again drag the

mouse with left button pressed. This disables motion detection in the "double" selected area. Clear

button deleted all previously set motion detection areas, and All button set whole the image as a area of

motion detection.

WWW INTERFACE - WORKING WITH CAMERA

* option active for cameras with alarm input/output

Detection of motion in a set area/areas is indicated by the green letter M. When the events of

motion detection are recorded on the SD card, the letter M is red.

Strona się ładuje...

Novus 2000 Series Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Novus 2000 Series Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty