Yamaha EZ300 61 Full-Size Lighted Touch Sensitive Keyboard Instrukcja obsługi

EZ-300

1

Before using the instrument, be sure to read

“PRECAUTIONS” on pages 5-7.

EZ-300

2

EZ-300

3

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your author-

ity, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices. This equipment gen-

erates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic

devices. Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this product

is found to be the source of interference, which can be deter-

mined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distribute

this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by Yamaha Corporation of America.

FCC INFORMATION (U.S.A.)

(class B)

COMPLIANCE INFORMATION STATEMENT

(Supplier’s declaration of conformity procedure)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : EZ-300

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may

cause undesired operation.

* This applies only to products distributed by Yamaha Corporation of America. (FCC SDoC)

EZ-300 Owner’s Manual

4

For the AC adaptor

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and main-

tenance (servicing) instructions in the liter-

ature accompanying the product.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tri-

pod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13 Unplug this apparatus during

lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

(bottom_en_01)

The model number, serial number, power require-

ments, etc., may be found on or near the name

plate, which is at the bottom of the unit. You should

note this serial number in the space provided below

and retain this manual as a permanent record of

your purchase to aid identification in the event of

theft.

Model No.

Serial No.

EZ-300 Owner’s Manual

5

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

For the AC adaptor

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily

accessible. If some trouble or malfunction occurs, immediately

turn off the power switch of the instrument and disconnect the AC

adaptor from the outlet. When the AC adaptor is connected to the

AC outlet, keep in mind that electricity is flowing at the minimum

level, even if the power switch is turned off. When you are not

using the instrument for a long time, make sure to unplug the

power cord from the wall AC outlet.

For the instrument

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or

even death from electrical shock, short-circuiting, damages, fire or other hazards. These

precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 94) only. Using the wrong

adaptor can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open

the instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp

or wet conditions, or place on it any containers (such as vases,

bottles or glasses) containing liquids which might spill into any

openings. If any liquid such as water seeps into the instrument,

turn off the power immediately and unplug the power cord from

the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning

item may fall over and cause a fire.

• Follow the precautions below. Failure to do so might result in

explosion, fire, overheating or battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

Power supply/AC adaptor

Do not open

Water warning

Fire warning

Battery

DMI-7 1/3

EZ-300 Owner’s Manual

6

- Do not attempt to recharge batteries that are not designed to be

charged.

- Keep the batteries separate from metallic objects such as

necklaces, hairpins, coins, and keys.

- Use the specified battery type (page 94) only.

- Use new batteries, all of which are the same type, same model,

and made by the same manufacturer.

- Always make sure all batteries are inserted in conformity with

the +/- polarity markings.

- When the batteries run out, or if the instrument is not to be

used for a long time, remove the batteries from the instrument.

- When using Ni-MH batteries, follow the instructions that came

with the batteries. Use only the specified charger device when

charging.

• Keep batteries away from small children who might accidentally

swallow them.

• If the batteries do leak, avoid contact with the leaked fluid. If the

battery fluid should come in contact with your eyes, mouth, or

skin, wash immediately with water and consult a doctor. Battery

fluid is corrosive and may possibly cause loss of sight or

chemical burns.

• When one of the following problems occur, immediately turn off

the power switch and disconnect the electric plug from the outlet.

(If you are using batteries, remove all batteries from the

instrument.) Then have the device inspected by Yamaha service

personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

- If any cracks or breakages exist on the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you

or others, or damage to the instrument or other property. These precautions include, but are not

limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord

can damage it.

• Remove the electric plug from the outlet when the instrument is

not to be used for extended periods of time, or during electrical

storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug

from the outlet. Even when the power switch is turned off,

electricity is still flowing to the product at the minimum level.

When you are not using the product for a long time, make sure to

unplug the power cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching it,

use the provided screws only. Failure to do so could cause

damage to the internal components or result in the instrument

falling over.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps

on the panel. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons,

switches or connectors.

• Do not use the instrument/device or headphones for a long period

of time at a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any hearing loss

or ringing in the ears, consult a physician.

If you notice any abnormality

Power supply/AC adaptor

Location

Connections

Handling caution

DMI-7 2/3

EZ-300 Owner’s Manual

7

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage

to the product, damage to data, or damage to

other property, follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric

devices. Otherwise, the instrument, TV, or radio may

generate noise. When you use the instrument along with

an application on your smart device such as a

smartphone or tablet, we recommend that you set

“Airplane Mode” to on on that device in order to avoid

noise caused by communication.

• Depending on the condition of surrounding radio waves,

the instrument may possibly malfunction.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration, damage to

the internal components or unstable operation. (Verified

operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or

keyboard.

• Do not press the LCD screen with your finger because it

is a sensitive, precision-made part. Doing so might cause

an appearance abnormality, such as a stripe on the LCD,

although this abnormality should disappear again within

a short time.

 Maintenance

• When cleaning the instrument, use a soft cloth. Do not

use paint thinners, solvents, alcohol, cleaning fluids, or

chemical-impregnated wiping cloths.

 Saving data

• Some of the data of this instrument (page 59) are retained

when the power is turned off. However, the saved data

may be lost due to some failure, an operation mistake,

etc. Save your important data onto an external device

such as a computer (page 57).

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio data

is strictly prohibited except for your personal use.

• This product incorporates and bundles contents in which

Yamaha owns copyrights or with respect to which

Yamaha has license to use others' copyrights. Due to

copyright laws and other relevant laws, you are NOT

allowed to distribute media in which these contents are

saved or recorded and remain virtually the same or very

similar to those in the product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data, WAVE

data, voice recording data, a score, score data, etc.

* You are allowed to distribute medium in which your

performance or music production using these contents

is recorded, and the permission of Yamaha Corporation

is not required in such cases.

 About functions/data bundled with the

instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

• The bitmap fonts used in this instrument have been

provided by and are the property of Ricoh Co., Ltd.

 About this manual

• The illustrations and LCD screens as shown in this

manual are for instructional purposes only, and may

appear somewhat different from those on your

instrument.

• Windows is a registered trademark of Microsoft®

Corporation in the United States and other countries.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-7 3/3

EZ-300 Owner’s Manual

8

Thank you for purchasing this Yamaha Digital Keyboard!

This instrument features a convenient lighting keyboard which makes it easy for beginners to play the

keyboard. It also features a wide variety of built-in preset Songs, including pop and classical music, for

your playing pleasure.

We recommend that you read this manual carefully so that you can fully take advantage of the

advanced and convenient functions of the instrument.

We also recommend that you keep this manual in a safe and handy place for future reference.

About the Manuals

In addition to this Owner’s Manual, the following Online materials (PDF files) are available.

 Included Document

Owner’s Manual

• Setting Up: This section explains how to set up and start using this instrument.

• Quick Guide: This section explains briefly how to use the basic functions.

• Reference: This section explains in detail how to use various functions.

• Appendix: This section includes specifications, Voice List, etc.

 Online Materials (PDF)

Drum Kit List

This contains detailed information of the Drum Kit Voices (Voice No. 242-263; page 78). When you

select these Voices, various drum, percussion and SFX sounds listed here are assigned to each

key.

MIDI Reference

This contains MIDI-related information, such as the MIDI Implementation Chart.

Computer-related Operations

This contains instructions about computer-related functions.

Smart Device Connection Manual

This explains how to connect the instrument to smart devices, such as smartphones, tablet

devices, etc.

To obtain these manuals, access the Yamaha Downloads, and then enter the model name for searching

the desired files.

Yamaha Downloads https://download.yamaha.com/

Song Book (only in English, French, German and Spanish)

This contains music scores for the preset Songs (excepting for a Demo Song and some Songs due

to copyright issues) of this instrument.

To obtain this Song Book, access the Yamaha website and download it from the product web page.

Yamaha Global Site https://www.yamaha.com

• For a general overview of MIDI and how you can effectively use it, search for “MIDI Basics” (only in English, Ger-

man, French and Spanish) on the website above.

NOTE

EZ-300 Owner’s Manual

9

Included Accessories

• Owner’s Manual (this book)

• Music rest

• Online Member Product Registration

• AC adaptor

*

* May not be included depending on your particular locale. Check

with your Yamaha dealer.

Formats and functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI

standard which ensures that any GM-compati-

ble music data can be accurately played by any

GM-compatible tone generator, regardless of

manufacturer. The GM mark is affixed to all

software and hardware products that support

GM System Level.

XGlite

As its name implies, “XGlite” is a simplified ver-

sion of Yamaha’s high-quality XG tone genera-

tion format. Naturally, you can play back any

XG song data using an XGlite tone generator.

However, keep in mind that some songs may

play back differently compared to the original

data, due to the reduced set of control parame-

ters and effects.

Style File Format (SFF)

The Style File Format combines all of

Yamaha’s auto accompaniment know-how

into a single unified format.

USB

USB is an abbreviation for Universal Serial

Bus. It is a serial interface for connecting a

computer with peripheral devices. It allows

“hot swapping” (connecting peripheral

devices while the power to the computer is

on).

Touch Response

The exceptionally natural Touch Response

feature gives you maximum expressive con-

trol over the level of the Voices.

EZ-300 Owner’s Manual

10

PRECAUTIONS ................................................... 5

NOTICE ............................................................... 7

Information ........................................................... 7

About the Manuals............................................... 8

Included Accessories ........................................... 9

Formats and functions ......................................... 9

Setting Up

Panel Controls and Terminals 12

Setting Up 14

Power Requirements ......................................... 14

Turning the Power On........................................ 15

Setting the Auto Power Off function ................... 15

Adjusting the Master Volume ............................. 16

Connecting Headphones or External Speaker... 16

Using a Pedal (Footswitch) ................................ 16

Using the Music Rest ......................................... 16

Display Items 17

Quick Guide

Basic Operations ...............................18

Transfer Your Favorite MIDI Song from

the Computer to the Instrument.....19

Practice Playing a Song Using

Lesson Functions .....................20

Play with Rhythm and

Accompaniment (Styles).............21

Record Your Performance.....................22

Use the Metronome ............................23

Make Detailed Settings

(Function Settings) ...................23

Reference

Playing a Variety of Instrument Voices 24

Selecting a Main Voice....................................... 24

Playing the “Grand Piano”..................................24

Using the Metronome......................................... 24

Adding a Layer – Dual Voice.............................. 25

Playing Different Voices with Your Left and

Right Hands (Split) ........................................ 25

Changing the Touch Response of

the Keyboard ................................................. 26

Applying Effects to the Sound............................26

Adding Harmony or Arpeggio.............................28

Playing the keyboard with two persons

(Duo mode) 30

Playing Songs 31

Selecting and Playing Back a Song ................... 32

Playing Songs Repeatedly (BGM function)........33

Song Fast Forward, Fast Reverse, and Pause .. 33

Changing the Song Melody Voice...................... 33

A-B Repeat......................................................... 34

Turning Each Part On/Off................................... 34

Transferring Songs from a

Computer to this Instrument .......................... 34

Using the Song Lesson Feature 35

Lighting Keyboard (Light Guide Function)..........36

Keys to Success................................................. 36

Phrase Repeat ................................................... 38

Listening, Timing and Waiting ............................ 39

Learning How to Use “Touch” Control

(Touch Tutor) 41

Hearing and Experiencing the Sound of

the Chords (Chord Study) 42

Hear and experience a sound of a single chord

.. 42

Hear and experience basic chord progressions

.. 42

Playing Chords along with Chord

Progressions of a Song 43

Play the chords in combination with

“Waiting” of the Lesson function .................... 43

Contents

EZ-300 Owner’s Manual

11

Playing with Rhythm and Accompaniment

(Styles) 44

Setting the Fingering Type................................. 44

Setting the Smart Chord Key ............................. 44

Playing Styles .................................................... 45

Style Variations .................................................. 46

Chord Types for Style Playback......................... 47

Chords Heard When Smart Chord is Selected .. 48

Looking Up Chords Using the Chord Dictionary

.. 49

Using the Music Database ................................. 50

Registering a Style File ...................................... 50

Recording Your Performance 51

Track Structure of a Song .................................. 51

Quick Recording ................................................ 51

Recording to a Specified Track.......................... 52

Clearing a User Song......................................... 52

Memorizing Your Favorite Panel Settings 53

Recalling Panel Settings from

the Registration Memory ............................... 53

Memorizing Panel Settings to

the Registration Memory ............................... 54

Deleting the Registration Memory...................... 54

Disabling Recall of Specific Items (Freeze) ....... 54

Selecting an EQ Setting for

your Favorite Sound 55

Connecting to Other Devices 56

Playing an External Audio Device with

the Built-in Speakers ..................................... 56

Connecting to a Computer ................................. 57

Connecting a Smart Device ............................... 58

Lowering the volume of a melody part

(Melody Suppressor function) ....................... 58

Backup and Initialization 59

Backup Parameters ........................................... 59

Initialization ........................................................ 59

The Functions 60

Appendix

Troubleshooting .......................................... 64

Song Book Sample...................................... 66

Voice List ..................................................... 76

Standard Kit 1 List....................................... 82

Song List ...................................................... 83

Style List ...................................................... 85

Music Database List.................................... 87

Effect Type List............................................ 89

Specifications .............................................. 93

Index............................................................. 95

EZ-300 Owner’s Manual

12

Setting Up

Panel Controls and Terminals

Front Panel

Setting Up

q

w

e

r

u

i

o

t

y

!1 !2 !3 !4 !5

!0

!6

!7

!8

@1 @2 @3

!9

@5

@6

@7

@8

@9

036

(C1)

048

(C2)

060

(C3)

072

(C4)

084

(C5)

096

(C6)

@4

@0

Song List

(page 83)

Music

Database List

(page 87)

Display

(page 17)

Voice List

(page 76)

Style List

(page 85)

As illustrated, each note of the keyboard

has a specific note number and name (e.g.,

036/C1), which is used in making various

settings, such as Split Point (page 45).

Panel Controls and Terminals

EZ-300 Owner’s Manual

13

Setting Up

q [ ] (Standby/On) switch ....................page 15

w [MASTER VOLUME] dial ......................page 16

e [DEMO] button......................................page 33

BGM................................................page 33

r [METRONOME] button.........................page 24

TIME SIG. ......................................page 24

t [TEMPO/TAP] button ............................page 32

y PART

[L] button ..............................................page 39

[R] button ..............................................page 39

y [REC TRACK 2] button.........................page 52

[REC TRACK 1] button.........................page 52

u [KEYS TO SUCCESS] button...............page 36

i [PHRASE REPEAT] button...................page 38

o [1 LISTENING 2 TIMING 3 WAITING] button

...............................................................page 39

CHORD DICT. ................................page 49

!0 [A-B REPEAT] button ...........................page 34

!1 [REW] button ........................................page 33

!2 [FF] button ............................................page 33

!3 [PAUSE] button.....................................page 33

!0 [ACMP ON/OFF] button........................page 45

SPLIT POINT..................................page 60

!1 [INTRO/ENDING/rit.] button .................page 46

!2 [MAIN/AUTO FILL] button ....................page 46

!3 [SYNC START] button ..........................page 45

!4 [START/STOP] button...........................page 32

!5 [REC] button .........................................page 51

CLEAR............................................page 52

!6 [VOICE] button......................................page 24

SONG MELODY VOICE .................page 33

!7 [SONG] button ......................................page 32

!8 [STYLE] button .....................................page 45

!9

Number buttons [0]–[9], [+/YES], [-/NO]

....page 18

@0 [PORTABLE GRAND] button ...............page 24

@1 [DSP] button .........................................page 26

TYPE...............................................page 26

@2 [ARTICULATION] button ......................page 27

@3 [REGIST MEMORY] button ..................page 53

MEMORY ........................................page 53

@4 [FUNCTION] button ..............................page 60

LIGHT GUIDE .................................page 36

@5 [MUSIC DATABASE] button .................page 50

@6 [DUAL] button .......................................page 25

DUAL VOICE ..................................page 25

@7 [SPLIT] button.......................................page 25

SPLIT VOICE ..................................page 25

@8 [HARMONY/ARPEGGIO] button..........page 28

TYPE...............................................page 28

@9 Drum illustrations for the Drum Kit ....page 24

Each of these indicates the drum or percussion instrument

assigned to the corresponding key for “Standard Kit 1.”

#0 [SUSTAIN] jack .....................................page 16

#1 [PHONES/OUTPUT] jack......................page 16

#2 [AUX IN] jack.........................................page 56

#3 [USB TO HOST] terminal .....................page 57

#4 DC IN jack .............................................page 14

In the Lesson mode

In the Recording mode

In the Song mode

In the Style mode

Panel Setup (Panel Settings)

By using the controls on the panel, you can make various

settings as described here. These settings of the instru-

ment are together referred to as “panel setup” or “panel

settings” in this manual.

The “Press and hold” Symbol

Buttons having this indication can be used to call

up an alternate function when the relevant button

is pressed and held. Hold down this button until

the function is called up.

#1 #2 #3

#4

#0

Rear Panel

EZ-300 Owner’s Manual

14

Setting Up

Power Requirements

Although the instrument will run either from an AC

adaptor or batteries, Yamaha recommends use of an

AC adaptor whenever possible. An AC adaptor is

more environmentally friendly than batteries and

does not deplete resources.

Using an AC Adaptor

Connect the AC adaptor in the order shown in the

illustration.

Using Batteries

This instrument requires six “AA” size, Alkaline (LR6)/

Manganese (R6) batteries, or rechargeable nickel-

metal hydride batteries (rechargeable Ni-MH batter-

ies). The Alkaline batteries or rechargeable Ni-MH

batteries are recommended for this instrument, since

other types may result in poorer battery performance.

1 Make sure that the power of the instrument is off.

2 Open the battery compartment cover located on

the instrument’s bottom panel.

3 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the com-

partment.

4 Replace the compartment cover, making sure that

it locks firmly in place.

Make sure to set the battery type correctly (page 15).

• Use the specified AC adaptor (page 94) only. Using the

wrong AC adaptor can result in damage to the instrument

or overheating.

• When using the AC adaptor with a removable plug, make

sure to keep the plug attached to the AC adaptor. Using the

plug alone can cause electric shock or fire.

• If the plug is accidentally removed from the AC adaptor,

slide it back in until it clicks into place, taking care to

avoid touching any internal metal parts. To avoid electric

shock, short circuit or damage, also be careful that there

is no dust between the AC adaptor and plug.

• When setting up the product, make sure that the AC outlet

you are using is easily accessible. If some trouble or mal-

function occurs, immediately turn the power off and dis-

connect the plug from the outlet.

• Follow the order shown above in reverse when disconnecting

the AC adaptor.

2

1

DC IN jack

(page 13)

AC outlet

AC

adaptor

WARNING

Plug

The shape of the plug differs depending on

your area.

Slide the plug as

indicated.

CAUTION

NOTE

• When the batteries run out, or if the instrument is not to be

used for a long time, remove the batteries from the instru-

ment.

• Connecting or disconnecting the AC adaptor with batter-

ies installed may turn the power off, resulting in loss of

data being recorded or transferred at the time.

• When battery power becomes too low for proper opera-

tion, the volume may be reduced, the sound may be dis-

torted, and other problems may occur. When this happens,

make sure to replace all batteries with new ones or already

recharged ones.

WARNING

NOTICE

Setting Up

EZ-300 Owner’s Manual

15

Setting Up

 Setting the battery type

Depending on the battery type to be used, you need

to change the battery type setting on this instrument.

Alkaline (and manganese) batteries are chosen by

default. After installing new batteries and turning the

power on, make sure to set the Battery Type appro-

priately (rechargeable or not) via Function number

064 (page 63).

Turning the Power On

1 Turn down the [MASTER VOLUME] dial to “MIN.”

2 Press the [ ] (Standby/On) switch to turn the

power on.

The Voice name appears on the display. Adjust

the volume as desired while playing the key-

board.

3 Press and hold the [ ] (Standby/On) switch for

about a second to set the instrument to standby

mode.

Setting the Auto Power Off

function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The

amount of time that elapses before the power is

automatically turned off is 30 minutes by default;

however, you can change the setting.

 To set the time that elapses before

Auto Power Off is executed:

Press the [FUNCTION] button several times until

“AutoOff” (Function 063; page 63) appears, then use

the [+/YES] or [-/NO] button to select the desired

value.

Settings: oFF, 5, 10, 15, 30, 60, 120 (minutes)

Default value: 30 (minutes)



To disable the Auto Power Off function:

Turn the power on while holding down the lowest key

on the keyboard. A message “oFF AutoOff” appears

briefly, then the instrument starts up with the Auto

Power Off function disabled. The Auto Power Off

function also can be disabled by selecting Off in

Function number 063 (page 63).

• This instrument cannot charge the batteries. Use only the

specified charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

• Failure to set the battery type may shorten the amount of

the battery life. Make sure to set the battery type correctly.

• Even when the [ ] (Standby/On) switch is in standby sta-

tus, electricity is still flowing to the product at the mini-

mum level. Remove the electric plug from the outlet when

the instrument is not to be used for extended periods of

time, or during electrical storms.

• Press only the [ ] (Standby/On) switch when turning the

power on. Any other operations such as pressing the pedal

are not allowed. Doing so may cause the instrument to

malfunction.

NOTE

NOTICE

CAUTION

NOTICE

• Depending on the instrument status, the power may not

turn off automatically, even after the elapse of the specified

period of time. Always turn off the power manually when

the instrument is not in use.

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to pro-

tect the devices from damage. If you do not want the

power to turn off automatically when a device is con-

nected, disable Auto Power Off.

• Generally, the data and settings are maintained even when

the power is turned off with the Auto Power Off function. For

details, see page 59.

The lowest key

NOTICE

NOTE

Setting Up

EZ-300 Owner’s Manual

16

Setting Up

Adjusting the Master Volume

To adjust the volume of the entire keyboard sound,

use the [MASTER VOLUME] dial while playing the

keyboard.

Connecting Headphones or

External Speaker

Connect a pair of headphones to the [PHONES/

OUTPUT] jack. This jack also functions as an exter-

nal output. By connecting to a computer, keyboard

amplifier, recorder, or other audio device, you can

output the audio signal of this instrument to that

external device. The speakers of this instrument are

automatically shut off when a plug is inserted into

this jack.

Using a Pedal (Footswitch)

You can control three functions: Sustain, Articulation

(page 27), and Arpeggio (page 29) as you play by

pressing a footswitch (FC5 or FC4A; sold separately)

plugged into the [SUSTAIN] jack. By default, Sustain

is assigned, so that the sound can be heard for a

long time even if you take your finger off the keyboard

while pressing the footswitch, like a damper pedal on

a piano. To use a function other than Sustain, use

the function settings (Function 029; page 61).

Using the Music Rest

Insert the music rest into the slots as shown.

• Do not use the instrument for a long period of time at a

high or uncomfortable volume level, since this can cause

permanent hearing loss.

• Do not use the instrument or headphones for a long period

of time at a high or uncomfortable volume level, since this

can cause permanent hearing loss.

• Before connecting the instrument to other electronic com-

ponents, turn off the power of all the components. Also,

before turning any components on or off, make sure to set

all volume levels to minimum. Otherwise, damage to the

components or electrical shock may occur.

• To avoid possible damage to the external device, first turn

on the power to the instrument, then to the external

device. When turning off the power, do so in reverse order:

first turn off the power to the external device, then to the

instrument.

• When connecting the headphones or external speaker to the

instrument, set the Master EQ (page 55) to “2 Headphone.”

The Master EQ can be set in Function settings (page 61;

Function 025).

CAUTION

Standard stereo

phone plug

CAUTION

NOTICE

NOTE

• Plug or unplug the footswitch while the power is off. Also, do

not press the footswitch when turning the power on. Doing so

changes the polarity of the footswitch, resulting in reversed

operation.

• The Sustain function does not affect Split Voices (page 25) or

the Styles (Auto Accompaniment; page 44).

NOTE

EZ-300 Owner’s Manual

17

Setting Up

Display Items

CncertGP

003

001

Voice/Song/Style

This area indicates the Lesson related status

is on.

Keys to Success (page 36)

Phrase Repeat (page 38)

Chord Progression (page 43)

Indicates the Passing Status

(page 37) of the Keys to Success

Lesson.

Lesson Indication

Harmony (page 28)

Arpeggio (page 28)

Dual (page 25)

Split (page 25)

DSP (page 26)

Duo (page 30)

Articulation (page 27)

Function status

Indicates the chord which is played on the Auto Accompa-

niment range (page 45) of the keyboard, or specified via

Song playback.

Normally indicates the current measure number of the cur-

rent Style or Song. When the [FUNCTION] button (page 60)

is in use, this indicates the Function number.

Indicates the current beat of playback.

Indicates notes currently being played (same as the lighting keyboard). Indi-

cates the melody and chord notes of a Song when the Song Lesson function is

in use. Also indicates the notes of a chord—either when playing a chord or

when using the Dictionary function.

Chord

Measure or Function

Beat

Keyboard Display

02

7

003

C3

Indicates the on/off status of Song

playback or target Track of Song

recording (pages 34, 52).

Lit: Track contains data

Unlit: Track is muted or contains no data

Flashing: Track is selected as recording track

Appears when the A-B Repeat func-

tion is active. (page 34)

Appears when the Auto Accompani-

ment function is on. (page 45)

Song Track status

A-B Repeat

Auto Accompaniment

(page 53)

Registration

Memory

Touch Response (page 26)

Strength Meter

is a meter that lights up according to the

strength with which you play the keyboard.

(pages 26, 41)

represents the target strength when prac-

ticing with Songs in the “Touch Tutor” cate-

gory. (page 41)

Touch Indication

Voice selection mode

Song mode

Style mode

* The mark next to the mode name indicates which

mode is activate and whose contents can be

selected with the number buttons or [+/YES]/[-/NO]

buttons.

* is always shown, even when in the Song or

Style mode.

EZ-300 Owner’s Manual

18

Quick Guide

This instrument features three basic functions: Voice, Song, and Style. This section shows you how

to use these three functions and how to use the number buttons and [+/YES], [-/NO] buttons which

are useful for various functions.

1

Press one of the following buttons to select a basic function.

The above operation calls up the name and number of the current Voice, Song, or Style, and shows it in

the display.

2

Select a Voice, Song, or Style by using the number buttons [0]–[9], [+/YES], [-/NO].

3

Start playing the Voice, Song or Style that you selected.

Voice .....................Play the keyboard.

Song.....................Press the [START/STOP] button to start Song playback.

Style .....................Press the [START/STOP] button to start only the rhythm part.

For instructions on playing the chord accompaniment part etc., refer to page 45.

Basic Operations

..................... Keyboard Voice

..................... Song

..................... Style

 Number buttons [0]–[9]

The Number buttons can be used to directly enter

a Voice, Song, or Style number or parameter

value.

Press number but-

tons [0], [0], [3] or

simply press [3].

Example: Selecting Voice 003, Bright Piano

 [+/YES], [-/NO] buttons

Press the [+/YES] button briefly to increase the

value by 1, or press the [-/NO] button briefly to

decrease the value by 1. Press and hold either but-

ton to continuously increase or decrease the value

in the corresponding direction. Pressing both but-

tons simultaneously lets you reset a parameter to

the default value.

Press briefly to

increase.

Press briefly to

decrease.

Pressing the [PORTABLE GRAND] button will reset

the Voice settings to the Grand Piano Voice (Voice

No.001 Live!ConcertGrandPiano).

Quick Guide

EZ-300 Owner’s Manual

19

Quick Guide

Windows10 is used for the examples in this manual.

1

Connect the [USB TO HOST] terminal (page 13) on rear panel of this instrument and

the computer via a USB cable.

2

Press the [+/YES] button in the function settings (Storage; Function 059; page 63) to

turn the “Storage Mode” on.

3

Copy your favorite song file from the computer to the instrument folder on the com-

puter display.

For other important information about copying files, refer to “Computer-related Operations” on the website

(page 8).

4

After copying is completed, remove the instrument drive from the computer.

5

Disconnect the USB cable connecting the instrument to the computer.

6

Press the [-/NO] button in the same function settings as in step 2 to turn the “Storage

Mode” off.

7

Start playback of the transferred Song (Song No. 208 –).

For instructions on playing back a Song, refer to page 32.

Transfer Your Favorite MIDI Song from the Computer

to the Instrument

Computer

USB cable

Instrument

USB terminal [USB TO HOST] terminal

Storage

on

059

Instrument drive

Folder containing song files

1

2

3

 Page 57

Quick Guide

EZ-300 Owner’s Manual

20

Quick Guide

This instrument features the following Lesson functions. Select and practice your favorite preset

Songs, and improve your playing skills with the Song Book, which includes the music scores of the pre-

set Songs, or important points for “Keys to Success,” etc.

Keys to Success

You can select just the key phrases of the Song - the ones you like most or need to work on - and prac-

tice them one by one. Enjoy this Lesson by passing and completing each step.

Select the Song you want to learn, and then press the [KEYS TO SUCCESS] and [START/

STOP] buttons to start Lesson.

Phrase Repeat

This lets you practice difficult phrases repeatedly. It’s ideal for use as a final practice before you go on

to the last Step to try to pass in the Keys to Success mode, or when you just want to practice a difficult

phrase repeatedly.

Listening, Timing and Waiting

You can practice the preset Songs in the following three steps, independently for the right or left hand,

or both hands.

These three lessons can be used with Keys to Success or Phrase Repeat. If you feel it difficult to play

the specific phrase in Keys to Success, use the Waiting lesson to have the phrase pause until you play

the correct note (page 39).

 Lesson 1 (Listening) ...... Listen to the model melody/chords of the part you selected carefully and remem-

ber it well.

 Lesson 2 (Timing) .......... Play the notes with the correct timing.

 Lesson 3 (Waiting) ......... Play the correct notes.

Select the Song you want to learn, and then press the [1 LISTENING 2 TIMING 3 WAITING]

button to start your desired Lesson.

Practice Playing a Song Using Lesson Functions

Select the

Song you want

to learn.

Practice step 1.

Practice

Steps 2, 3, 4...

and so on.

Practice the

last Step.

You’re

done!

Passed

★

Passed

★★

Passed

★★★

 Page 35

Strona jest ładowana ...

Yamaha EZ300 61 Full-Size Lighted Touch Sensitive Keyboard Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha EZ300 61 Full-Size Lighted Touch Sensitive Keyboard Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty