25300 AL MOEN DRIVE NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.MOEN.COM
Copyright Creative Specialties International
Directions below are for installation into drywall. If installing product into a
stud, use the wood screws and washers provided only.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill tw o 5/16” holes as indicated on the template.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to activate
anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each setscrew.
9. Place the mounting plate on the w all over the installed w all anchors w ith “UP”
facing you.
10. Insert screws through the mounting plate into the anchors. Tighten the screws.
11. Unscrew the top accent cap from both assemblies. Reassemble with glass shelf
between both washers and finish by screwing top accent cap back on.
12. Place assembly over the mounting posts with setscrews facing down. Tighten both
setscrews.
Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
DN0790CH – Glass Shelf
Chrome Finish
DN0790BN – Glass Shelf
Brushed Nickel Finish
Cleaning Instructions:
Stock Number:________________________Glass Shelf
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
DN0790
Iso™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1404
-
1
Moen DN0790BL Specyfikacja
- Typ
- Specyfikacja
w innych językach
- English: Moen DN0790BL Specification
