CONDTROL Laser krzyżowy Qb Green Instrukcja obsługi

2

CONDTROL Qb Green

EN CONTENTS

PRODUCT DESCRIPTION 4

SET 4

SAFETY REGULATIONS 6

TECHNICAL SPECIFICATIONS 7

OPERATION 8

ACCURACY CHECK 9

CARE AND MAINTENANCE 13

UTILIZATION 14

WARRANTY 14

DE INHALT

PRODUKTBESCHREIBUNG 16

LIEFERUMFANG 16

SICHERHEITSHINWEISE 18

TECHNISCHE SPEZIFIKATIONEN 19

BETRIEB 20

GENAUIGKEITSUEBERPRUEFUNG 21

PFLEGE 24

ENTSORGUNG 25

GARANTIE 26

WARTUNG UND REPARATUR 27

FR SOMMAIRE

DESCRIPTION DE L’APPAREIL 28

COMPOSANTS 28

CONSIGNES DE SECURITE 30

CARACTERISTIQUES TECHNIQUES 31

MANIPULATION DE L’APPAREIL 32

CONTROLE DE PRECISION 33

MAINTENANCE ET EXPLOITATION 37

OBLIGATION DE GARANTIE 38

SERVICES ET CONSULTATION 38

MISE HORS SERVICES 39

3

CONDTROL Qb Green

RU



 

  











  

 

PL

OPIS PRODUKTU 52

ZAKRES DOSTAWY 52



DANE TECHNICZNE 55





 

USUWANIE ODPADÓW 61

GWARANCJA 62

KONSERWACJA I NAPRAWA 63

4

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

PRODUCT DESCRIPTION

Cross line laser CONDTROL Qb Green is intended to build and check

vertical and horizontal lines and planes, as well as inclined lines and

planes. The product is suitable for use at indoor building areas.

The product has 2 operating modes:

- blocked compensator, to build inclined lines and planes;

- automatic levelling to project horizontal and vertical lines and

planes. Levelling function allows to automatically compensate

irregularities within self-levelling range of ±5°.

SET

1. Laser level – 1 pc.



3. User manual – 1 pc.

5

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

1

6

2

3

1 - Laser lines apertures

2 - Switch on laser lines

3 - Light indicator

4 - Battery cover

5 - Tripod mount 1/4’’

6 - ON/OFF

5 4

6

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

SAFETY REGULATIONS

The user manual should be read carefully before you use the product

for the first time. Unintended use of the product can be dangerous for

human’s health and cause serious injury. Keep this user manual. If the

product is given to somebody for temporary use, be sure to enclose

user manual to it.

- Do not misuse the product;

- Do not remove warning signs and protect them from abrasion,

because they contain information about safe operation of the product.

The device belongs to laser product class 2 in accordance with EN

60825-1 with a 520 nm wavelength.

- Do not point the laser beam at people or animals, at glossy reflective

surfaces, do not look into the laser beam yourself.

- Install the unit in such a way as not to dazzle people and animals.

- Do not disassemble or repair the product yourself. Intrust product

repair to qualified personnel and use original spare parts only.

- Do not use the product in explosive environment, close to flammable

materials.

- Store the product away from children and unauthorized people.

- Laser intensive glasses are used for better recognition of the laser

beam, do not use them for other purposes. Laser glasses do not

protect from laser radiation as well as ultraviolet radiation and reduce

color perception.

LASER RADIATION!

Do not stareinto beam

Class 2 laser

<1 mW, 520 nm

IEC 60825-1: 2007-03

7

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

TECHNICAL SPECIFICATIONS

Working range 20 m*

Levelling accuracy ± 0,5 mm/m

Self-leveling range ±5°

Build inclined lines and planes 

Working temperature +5°C…+35°C

Storage temperature 

Laser type 520 nm, <1 mW, class II

Tripod mount 1/4''

Batteries 

Weight 175 g

Dimensions 65*57*67 mm

* An operating range can be different from the stated above subject

to light conditions.

8

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

OPERATION

Remove the battery cover, insert the batteries, observing correct

polarity. Light indicator will be on, when the power is low.

Place an instrument on a firm and stable surface or a tripod. Move

lever lock to choose necessary operating mode:

1) Blocked compensator, to build inclined lines and planes:

Move lever lock to locked position . Compensator is locked.

Press and hold button for 3 seconds to switch on laser planes.

2) Automatic levelling, to build horizontal and vertical lines and

planes:

Move lever lock to unlocked position . Compensator is unlocked.

Laser lines blink when the instrument is out of self-levelling range.

Short press button to switch on laser planes.

To switch off the product move lever lock to «OFF» position.

9

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

ACCURACY CHECK

Check of horizontal line

Check of horizontal line is carried out by using 2 walls located opposite

each other at a distance of 5m.

1. Put the instrument as close as possible to the wall so that laser

emitters are located opposite the wall.

2. Move lever lock to unlocked position and switch on horizontal

plane.

Mark location of horizontal line on the wall as A1.

3. Turn the instument by 180° and mark location of horizontal line on

another wall as B1.

4. Turn the instrument to the right. Measure vertical deviation of

horizontal line from point B1. If deviation exceeds 2.5 mm – please

contact service center.

10

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

5. Repeat actions in paragraph 4 by turning the instrument to the left.

6. Install the instrument closer to the opposite wall. Mark location of

horizontal line on the wall as B2.

7. Turn the instrument by 180° and mark location of horizontal line on

the opposite wall as A2.

8. Measure vertical distance between marks A1, A2 and B1, B2. If

distance between measured values exceeds 5 mm – please contact

service center.

max 2.5 mm

11

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

12

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

Check of vertical line

Use a plumb bob as a reference of a vertical. Place the instrument at

distance of 1,5m from the plumb bob.

1. Move lever lock to unlocked position , then switch on vertical

plane and align vertical laser line with the low point of plumb bob.

2. If deviation between the laser line and the plumb line exceeds ±0.5

mm per 1m of the plumb bob length (for a 2.5m plumb bob deviation



13

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

CARE AND MAINTENANCE

Attention! The product is an accurate optical mechanic device and

requires careful handling. Check the accuracy before using.

To increase the operating time and avoid the risk of unintentional

blindness switch the laser on only when you are ready to make

measurements.

If operated near objects or air streams with different from the

environment temperature the laser line may tremble due to

heterogeneity of the atmosphere. The longer is the distance, the more

trembling can be observed

The width of the laser line increases with the increasing of the

operating distance. The layout should be made along the axis of the

laser line. For maximum accuracy, use the middle portion of the laser

line.

It should be noted that the shape of the laser line on the object’s



the surface relative to the laser plane.

Maintenance of the following recommendations will extend the life of

the device:

- Transport and carry the product only with locked compensator.

- Keep the product clean and protected from any bumps, dust and

dampness; do not allow getting moisture, dust or other dirt inside

of the product.

- In case if any moisture goes into the product, remove the batteries

and take it to the service center.

- Do not keep or use the device for a long time at high humidity

conditions.

- Keep the instrument clean and wipe it with a clean and soft cloth.

14

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

Mishandling of the following rules can cause electrolite leakage from

the batteries or other damages:

- Remove the batteries from the product if you do not use it for a

long time.

- Do not use different power supply types with different charge

levels.

- Do not leave discharged batteries in the product.

UTILIZATION

Expired tools, accessories and package should be passed for waste

recycle. Please send the product to the following address for proper

recycle:

Condtrol GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Do not throw the product in municipal waste!



and their components must be collected separately and submitted to

environmentally friendly recycle of wastes.

WARRANTY

All Condtrol GmbH products go through post-production control and

are governed by the following warranty terms. The buyer’s right to

claim about defects and general provisions of the current legislation

do not expire.

          

discovered during the warranty period, that represent the defect in

material or workmanship in full volume and at its own expense.

            



15

user manual

CROSS LINE LASEREN

CONDTROL Qb Green

  

or improper use, malfunction of the product caused by failure to

observe the instructions of this user manual, untimely maintenance

and service and insufficient care, the use of non-original accessories

and spare parts. Modifications in design of the product relieve the

seller from responsibility for warranty works. The warranty does not

cover cosmetic damage, that doesn’t hinder normal operation of the

product.

          

repair of the device.





not renewed or extended.

           

associated with a defect of the device, the rental cost of alternative

equipment for the period of repair.

This warranty applies to German law except provision of the United

Nations Convention on contracts for the international sale of goods



In warranty case please return the product to retail seller or send it

with defect description to the following address:

Condtrol GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

16

Bedienungsanleitung

KREUZLINIENLASERDE

CONDTROL Qb Green

PRODUKTBESCHREIBUNG

Der Multilinien – Kreuzlinienlaser CONDTROL Qb Green wird zur

Ermittlung und Ueberpruefung von horizontalen und vertikalen

Linien, sowie von Ebenen mit jeglicher Neigung verwendet.

Er ist für Innenbereich geeignet.

Das Geraet hat zwei Betriebsarten:

- Ohne Nivellierautomatik zum Erzeugen von geneigten Linien und

Ebenen.

- Mit Nivellierautomatik der Gehaeuseneigung bis zum ±5° zum

Erzeugen horizontalen und vertikalen Laserlinien und Ebenen.

LIEFERUMFANG

1. Kreuzlinienlaser – 1 St.



3. Betriebsanleitung – 1 St.

17

Bedienungsanleitung

KREUZLINIENLASERDE

CONDTROL Qb Green

1

5 4

6

2

3

1 – Laseraustritt

2 – EIn-/ Aus-Taste

3 – Anzeige

4 – Batteriedeckel

5 - Stativgewinde 1/4’’

6 – Pendelsperre

18

Bedienungsanleitung

KREUZLINIENLASERDE

CONDTROL Qb Green

SICHERHEITSHINWEISE

Bitte lesen und befolgen Sie fuer die sichere Verwendung Ihres

Geraets alle Anweisungen. Warnschilder muessen stets sichtbar

und erkennbar sein. Bewahren Sie diese Bedienungsanleitung auf

und werfen Sie sie nicht weg. Bei nicht fachgerechter Anwendung

koennen Sie Laserstrahlung ausgesetzt sein.

Sie erhalten Ihr Geraet mit einem Warnschild in Englisch. Bitte

beachten Sie das hier abgebildete Warnschild in Deutsch.

Richten Sie den Laserstrahl niemals auf Personen oder Tiere. Blicken

Sie nicht in den Laserstrahl, auch nicht mit optischen Instrumenten.

Sie gefaehrden Ihr Augenlicht. Ihr Geraet erzeugt Laserstrahlung

der Klasse 2 gemaess EN60825-1. Die Laserbrille dient nicht als

Schutzbrille, sondern zur besseren Sichtbarkeit des Laserstrahls. Sie

bietet keinen Schutz vor Laserstrahlung. Die Laserbrille kann nicht

als Sonnenbrille verwendet werden. Der Einsatz im Strassenverkehr

ist verboten. Die Laserbrille schuetzt nicht vor UV-Licht und

verringert die Wahrnehmung von Farbunterschieden. Reparatur

und Wartung duerfen nur durch Fachpersonal mit Qualifikation

erfolgen, das originale Ersatzkomponenten einsetzt. Kinder duerfen

aus Sicherheitsgruenden das Geraet nur unter Aufsicht benutzen.

Verwenden Sie das Geraet nicht in der Naehe von brennbaren Stoffen,

da im Geraet Funken entstehen koennen. Die Halterung des Geraets

beinhaltet Magnete. Verwenden Sie sie daher nicht in der Naehe von

Herzschrittmachern, da deren Funktion durch Magnetfelder gestoert

werden kann. Vermeiden Sie ebenso die Naehe zu magnetischen

Datentraegern oder Geraeten, die auf Magnetfelder reagieren. Die

Folge koennen Datenloeschungen oder –zerstoerung sein.

LASERSTRAHLUNG!

Nicht in den strahl blicken

Laserklasse 2

<1 mW, 520 nm

IEC 60825-1: 2007-03

19

Bedienungsanleitung

KREUZLINIENLASERDE

CONDTROL Qb Green

TECHNISCHE SPEZIFIKATIONEN

Reichweite 20 m*

Genauigkeit ± 0,5 mm/m

Selbstnivellierung ±5°

Eryeugen geneigten Ebenen 

Betriebstemperatur +5°C…+35°C

Lagertemperatur 

Lasertyp 520 nm, <1 mV, Laserklasse II

Stativaufnahme 1/4''

Batterien 

Gewicht 175 g

Abmessungen 65*57*67 mm

* Die Reichweite kann durch ungünstige Umgebungsbedingungen (z.B.

direkte Sonneneinstrahlung) verringert werden.

20

Bedienungsanleitung

KREUZLINIENLASERDE

CONDTROL Qb Green

BETRIEB

Oeffnen Sie das Batteriefach und setzen Sie beide Batterien ein, bevor

Sie das Geraet in Betrieb nehmen. Achten Sie dabei auf die richtige

Polung. Bei niedrigem Batteriestand blinkt der Batterieanzeiger.

Stellen Sie das Messwerkzeug auf einen Stativ oder eine stabile

Oberflaeche.

Schieben Sie den Ausschalter, um den Betriebsmodus auszuwaehlen:

1) Pendel ist gesperrt – zum Erzeugen geneigter Linien und –Ebenen:

Schieben Sie den EIn-/ Aus-Taste in die Position „OFF“. Das Pendel

ist gesperrt.

Halten Sie die Taste für 3 Sekunden gedrückt, um den Laserstrahl

einzuschalten.

2) Arbeiten mit Nivellierautomatik – zum Erzeugen horizontalen und

vertikalen Linien und Ebenen:

Schieben Sie den EIn-/ Aus-Taste in die Position „ON“. Das Pendel

ist geloest.

Drücken Sie die Taste kurz, um die Laserstrahl.

Um das Geraet auszuschalten, schieben Sie den EIn-/ Aus-Taste

in die Position „OFF“

Strona jest ładowana ...

CONDTROL Laser krzyżowy Qb Green Instrukcja obsługi

CONDTROL Laser krzyżowy Qb Green Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty